SPECIAL REPAIR WORK TO BLDG NO T 267 TAPASYA HALL 3 EME CENTRE UNDER GE BHOPAL

Note :(i) Please refer Sch A/ BOQ Notes before quoting the tender for all phases/ items mentioned below. (ii) Amount of Schedule of credit shall be deducted offline

Dismantling of asbestos cement (corrugated, semi corrugated etc.) sheets in roof coverings, including ridge complete all as specified and directed.

Dismantling wrought iron or steel work of any description not otherwise provided for complete all as specified and directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quions, arches, pillars, etc complete all as specified and directed.

Taking down cement plaster on brick or stone wall etc including raking out joints, hacking for key, scrubbing down with water of any description complete all as specified and directed.

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons, walls, etc, laid bedded and pointed in any mortar complete all as specified and directed.

Demolition of cement concrete of any description and in any position not other wise specifically provided for complete all as specified and directed.

Taking down chowkhats or frame with shutter n. exc 1.5 sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed

Taking down chowkhats or frame with shutters exc 1.5 Sqm but n exc. 4.00 Sqm each (without taking off shutters from the frame) complete all as specified and directed

S&F of rolled mild steel framed work as in rafters, purlins, trusses and like (beam, tee, angle, channel or flat sections) including cutting to required length and necessary welding etc; of Fe 410-W (Gde E-250 quality) complete all as specified and directed.

S&F of pre-painted galvalume aluminum zinc coating GI based corrugated steel sheeting 0.50 mm thick of an colour having tensile strength of 550 Mpa (AZ-150) as in roof covering / cladding to wall, chajjas, ridges, etc. and fixed with self tapping screws complete all as specified and directed.

S&F of pre-painted galvalume aluminum zinc coating GI based plain steel sheeting 0.50 mm thick of an colour having tensile strength of 550 Mpa (AZ-150) as in roof covering / cladding to wall, chajjas, ridges, etc. and fixed with self tapping screws complete all as specified and directed.

M&L for preparation of new or previously untreated surfaces of steel and iron surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for 100 mm thick PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in flooring, hard standing, path and like; finishing the surfaces even and smooth without using extra cement complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing rubbish off the premises complete all as specified and directed.

M&L for vitrified ceramic light shade coloured tiles 8 to 10 mm thick (square/ rectangular) double charged, polished, area of each tiles not exceeding 0.36 Sqm as in floors etc; fixed with 5 mm spacers set and jointed in neat cement slurry over and including 15 mm thick screed bed in CM (1:6) and pointed with epoxy tile grout filling of approved make and colour complete all as specified and directed.

M&L fo vitrified ceramic light shade coloured tiles 10 mm thick (square/ rectangular) double charged, polished, area of each tiles not exceeding 0.36 Sqm, fixed on vertical surfaces such as skirting, dado etc; set and jointed in neat cement slurry over and including 10 mm thick cement plaster in CM (1:4) pointed with epoxy tile grout filling of approved make and colour complete all as specified and directed.

M&L for brick work with fly ash bricks (modular size bricks) straight or curved on plan exc 6 m mean radius, built in CM 1:6 complete all as specified and directed.

M&L for 10 mm thick ready mix plaster on brick/ concrete/ stone surfaces, finishing the surfaces even and smooth without using extra cement as per manufacturer's direction complete all as specified and directed. Make :- Ultratech readyplast, JSW Enduroplast, Hiscon Industries

M&L for 15 mm thick ready mix plaster on brick/ concrete/ stone surfaces, finishing the surfaces even and smooth without using extra cement as per manufacturer's direction complete all as specified and directed. Make :- Ultratech readyplast, JSW Enduroplast, Hiscon Industries

M&L for 5 mm thick rendering in CM 1:3 on ceiling surfaces, finishing the surfaces even and smooth without using extra cement complete all as specified and directed.

M&L for complete removal of existing treatment on wall surfaces and applying two coats oil bound distemper over one coat of wall primer complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying premium acrylic smooth exterior paint with silicone additives of required shade in two coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 0.9 Kg/10 sqm complete all as specified and as directed.

M&L for preparation of old wall surfaces and applying two coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS: 15489 : 2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm complete all as specified and directed.

S&F of factory made 30 mm thick flush shutters, solid core construction with plyboard core and plywood face panels, commercial type, covered with decorative face mica 0.9 mm thick on both faces with second class hardwood lipping/ frame to match complete all as specified and directed.

S&F of second class hard wood plain solid, straight, chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified and directed.

M&L for preparation of new or previously untreated surfaces of wood or wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F of aluminium door/ window/ ventilator/ partition, made out of extruded powder coated aluminium sections with sliding or openable shutters with 5 mm thick plain glass including frame and necessary jointing cleats, glazing clips, powder coated aluminium snap beading, screws etc; complete and also including powder coated aluminium fittings such as hinges, butt hinges, tower bolts, hooks & eyes, peg stays and handles including connected items with and including rubber beading and making good to the disturbed portion with its original complete all as specified and directed.

S&F for stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.

M&L for 18 to 20 mm thick granite stone slab (any type) (table rubbed and polished) as in steps, jambs, pillars, window & door cills, cooking platforms, counter, shelves and like in cement mortar (1:4) over and including 15 mm thick screed bed in CM 1:4 and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including making the edges bullnosed complete all as specified and directed.

S&F of 100 mm long stainless steel butt hinges, ISI marked, cast type and fixed complete all as specified and directed.

S&F of 150 mm long stainless steel handles, ISI marked, cast type and fixed complete all as specified and directed.

S&F of 150 mm long stainless steel tower bolts, ISI marked, extruded section and fixed complete all as specified and directed.

S&F of 140 mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

S&F of 300 mm long stainless steel sliding door bolts with hasp stapple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast sections complete all as specified and as directed.

S&F of door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and directed.

M&L for false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of semi perforated 12 mm thick micro tegular of size 595 x 595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC 0.50 to 0.75 as per IS 8225:1987, non-combustible as per BS 476 (part 4)-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33 mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main-T runners of size 15 x 32 mm of length 3000 mm, cross-T of size 15 x 32 mm of length 1200 mm and secondary intermediate cross-T of size 15 x 32 mm of length 600 mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24 x 24 x 0.40 mm of length 3000 mm to be fixed on periphery wall, partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall wood screws including dismantling boarding, any description, fixed in any position with nails complete as per manufacturer instructions and as directed.

M&L for providing cement concrete, 1:2:4, type B-1 (using 20 mm graded stone aggregate) as in coping, bed blocks, lintels, cills, steps, seismic and other similer bands, kerbs and like etc complete all as specified and directed.

M/L for 75 mm thick PCC 1:3:6 type C-1 (using 20 mm graded stone aggregate) as in plinth protection, aprons, hard standing, path and like including bitmuminous mastic filling in 1:3 joints (in every 3.00 mtr) and finishing the surfaces even and smooth without using extra cement complete all as specified and directed.

M&L for 400 x 400 mm ceramic heavy duty parking / outdoor tiles of minimum 10mm thickness as in floors over and including 15 mm thick screed bed in CM 1:6; set and jointed in neat cement slurry and pointed with white cement to match the shade of tiles complete all as specified and directed. complete all as specified and directed.

M&L for 100 mm thick cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in sub base concrete of flooring complete all as specified and directed.

M&L for joint free non skid ceramic coloured tiles 7 to 8 mm thick (square /rectangular), area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm as in floors; over and including 15 mm thick screed bed in CM 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of tiles complete all as specified and directed.

M&L for coloured glazed ceramic tiles in vertical surface of walls of size 450 x 300 & 7 mm thick over and including 10 mm thick rendering in CM 1:4 for backing of tiles, set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tiles complete all as specified and directed.

S&F in repairs vitreous china urinal, full stall type, white (excluding flushing cistern) including providing and fixing plugs bedding urinal against wall in cement mortar in 1:2 securing urinals to plugs with 60 mm brass screws, pointing around urinal back in white cement with and including CP waste fitting, PVC waste pipe and CP urinal spreader complete all as specified and directed.

S&F in repairs 15 mm bore pillar taps, cast copper alloy with capstan heads, chromium plated, fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F in repairs vitreous china water closet squatting pan "Orissa Pattern" of size 580 x 440 mm white with integral foot rests with and including provn of cement concrete bedding and 'P' or 'S' trap as required including connection to trap and to flush pipe, anti syphonage pipe, etc. and making good to floor complete all as specified and directed.

S&F in repairs syphonic action type PVC low level flushing cistern 10 ltrs capacity with 32mm dia flush pipe and PVC connection 600 mm long 15 mm bore with brass heads & washers and fixed complete all as specified and directed.

S&F in repairs 15 mm bore long body bib taps, cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed for iron pipe or for brass ferulle and fixed complete all as specified and directed.

S&F in repairs 15 mm bore stop valves, cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed for iron pipe or union complete as specified and directed.

S&F in repairs PVC connection 15mm size with PTMT nuts of length 450 mm and fixed complete all as specified and directed.

S&F in repairs 15 mm bore two way bib taps, cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed for iron pipe or for brass ferulle and fixed complete all as specified and directed.

S&F in repairs for health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.

M&L for dholpur stone with hammer dressed facework (with maximum depression from a straight edge held against the dressed surface not exc 20mm), about 40 mm high, 75 mm deep in straight courses, laid and jointed in cement and stone dust mortar 1:3, recess pointed (10mm x 20mm) with an admixture of white cement and dholpur stone dust 1:1 complete all as specified and directed.

Taking down copper/ aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc.for taking credit and making good disturbed surfaces of walls, floors, etc. complete all as specified and directed.

M&L for point wiring for one light / fan / bell point with multi-stranded copper conductor stranded copper conductor 1.5 Sqmm nominal cross-sectional area, single core, PVC insulated and unsheathed FRLS cable, 1100 volts grade in and including medium grade, PVC concealed conduit and conduit accessories of not less than 20 mm dia, concealed in wall/ floor etc, ISI marked with sheel metal mild steel flush box, white cover plate with frame for fixing modular switches, sockets and fan regulators etc. including PVC insulated multi-stranded copper conductor 1.5 Sq mm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed at site for the following:-

All as per item No 55.00 here-in-before but for one 3 pin socket outlet, 5 Amps on same board complete.

All as per item No. 55.00 here-in-before but for one 3 pin socket outlet, 5 Amps on independent board complete.

All as per item No. 55.00 here-in-before but for point wiring with 4.0 Sqmm FRLS mutistranded copper conductor cable for 5/ 15 Amps, switch socket combination on independent board and with 4.0 Sqmm, FRLS insulated multi-stranded single core earth wire for earth continuity, connected to common earth dolly complete.

S&F of modular switch piano, one module, single pole, one way, 6/ 16 Amps, 240 volt, 50Hz, AC complete all as specified and directed.

S&F of ceiling rose surface bakelite, three terminals, 230 volt AC complete all as specified and directed.

S&F of modular socket outlet, 2 module, multipurpose having provision for 2/3 pin, 6/16 Amp, 230 volt AC complete all as specified and directed.

S&F in replacement BEE 5 star rated, B/S certified BLDC decorative ceiling fan of 1200 mm sweep, 230 Volts, Min dia delivery 225 CFM, anti dust, aerodynamic aluminium blades & body with advanced brushless technology based BLDC copper winding motor with all accessories such as regulator, conneting down rod, clamps, canopy, remote with boost, timer & sleep mode complete all as specidied and directed. Notes: (i) Ceiling fan shall be Make - Bajaj/ Orient/ Havells/ CG/ Atomberg as approved by GE. (ii) Old ceiling fan will be deposited to MES store yard. (iii) Warranty of BLDC ceiling fan shall be for 2 year & 5 Year of BLDC Motor.

S&F of air circulator fans of 450 mm sweep, 1300 to 1440 RPM, 100 Watts, 230 volts, 50 Hz, single phase oscillating 450 mm sweep, ISI marked, heavy-duty metal body with powder-coated or chrome-plated finish with min air delivery 125 m³/min suitable for wall mounting complete all as specified and directed.

S&F of energy saving LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum housing toughened glass thermal shock and impact resistance and heat resistant complete with powered by integrad electronice driver with out put short circuit protection, surge protection, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete toughened glass, lens IP 66, IK-08 and with system efficacy of 125 lm/W CRI >70 , PF≥0.95 and making connection with suitable copper wire of size 23/0.0076 complete all as specified and directed.

S&F of LED 20/21Watt tube light fitting (T8 type) including LED retrofit tube 20/21 W one side connection type, 240 V, PF > 0.90, colour Temp 6500 K, System Luminious efficacy > 100Lm/W, complete with powder coated CRCA decorative patti suitable for surface mounting on wall, complete fitting including connecting with PVC insulated multistranded copper flexible cable 0.5 sqmm two core, and PVC round block white colour x 2 Nos for mounting of fitting complete all as specified and directed.

S&F of LED light fitting mirror type with high out put diffuser of 2 feet long, 10 watt, 220 Volts AC, decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F of LED luminaire 600 x 600 mm, 35/ 36 watt, 220 Volts AC, recessed type with high efficiency PMMA diffuser, soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F of sheet metal enclosure for MCB, DB, SPN, 240 Volts, 200 Amps rated busbar, 12 way double door enclosure made up of CRCA sheet steel, RAL 9003 powder coated, IP 56 protection complete all as specified and directed.

S&F of sheet metal enclosure for MCB, DB, SPN, 240 Volts, 200 Amps rated busbar, 4 way double door enclosure made up of CRCA sheet steel, RAL 9003 powder coated, IP 56 protection complete all as specified and directed.

S&F of MCB, SPN, 32 Amps, 240 Volts AC supply, C Curve with over load and short circuit protection and rupturing capacity not less than 10 KA complete all as specified and directed.

S&F of MCB, SP, 6 to 32 Amps, 240 Volts AC supply, C Curve with over load and short circuit protection and rupturing capacity not less than 10 KA complete all as specified and directed.

M&L for sub main wiring with approved colour coding as per IS (Red, Black and Green for single phase circuits) with two single core PVC insulated FRLS cable 1100 V unsheathed with stranded copper conductor of 4.0 sqmm nominal cross section area and drawing into rigid non metallic PVC conduit, ISI marked, medium grade inclusive of all fittings such as tees, bends, junction boxes, elbows, saddles, pipe hooks, couples, lock outs, etc. of 25 mm external diameter and PVC insulated stranded copper conductor of 4 sqmm nominal cross section area as earth wire complete all as specified and directed. Note: Three runs of 4.0 sqmm cable & PVC conduit pipe shall be measured as one unit length.

S&F of sheet metal plug & socket, single pole and neutral with and including 1 No single pole, MCB, 20 Amps, 240 V and fixed complete all as specified and directed.

S&F of factory made epoxy powder coated distribution board, TP & N, 4 ways (VTPN MCCB DB) with 100 Amps MCCB and space for MCCB as incomer, with metal door (IP-43 protection) fabricated from CRCA sheet and fixed semi flush to wall and suitable for universal mounting and including isolated neutral bar, insulated bus bar assembly, neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with knockouts complete all as specified and directed.

S&F of MCCB, TPN suitable for 415 volts, AC supply, 160 Amps, C Curve with over load and short circuit protection and rupturing capacity not less than 10 KA complete all as specified and directed.

S&F of exhaust fan, rust proof steel body, 230 Volts AC, single phase of size 300 mm sweep with blades, frame and louvers and all necessary fittings with and including drilling of hole and repair of disturbed surfaces complete all as specified and directed. Note:- Old unserviceable exhaust fans shall be deposited at MES Store yard.

S&F of exhaust fan, rust proof steel body, 230 Volts AC, single phase of size 450 mm sweep with blades, frame and louvers and all necessary fittings with and including drilling of hole and repair of disturbed surfaces complete all as specified and directed. Note:- Old unserviceable exhaust fans shall be deposited at MES Store yard.

M&L for earthing complete with galvanised steel plate earth electrode 600 x 600 x 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to earthing lead of size 4 mm dia galvanised mild steel wire by means of bolts, nuts, check nuts and washers of galvanised iron from earth plate to test point upto 7.5 metre including all as shown in electrical plate No. 3 of SSR Part I (2009) including necessary concrete chamber in cement concrete M15 (Nominal Mix) using 20 mm nominal size coarse aggregate, precast RCC cover slab in cement concrete M15 (Nominal mix) using 20 mm nominal size coarse aggregate of size 40 x 40 x 5 cm reinforced with 8 mm dia TMT bars @ 150 mm c/c both ways with one handle for lifting made out of 8 mm dia bar, GI funnel, GI wire mesh filter, 20 mm dia GI pipe medium grade for watering, 15 mm dia GI pipe medium grade for protection of earthing lead, charcoal or coke and salt in alternate layers including necessary excavation and earth work in any type of soil/ strata and testing complete all as specified and directed.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for foundations etc. or for shafts, well cess pits, manholes, pier holes, laying of cables etc. but not exceeding 10 Sqm on plan and not exceeding 1.5 m in depth and getting out in any type of soil complete all as specified and directed.

Returning, filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm in any type of soil complete all as specified and directed.

Removing excavated material to a distance n exc 50 m and depositing where directed at a level n exc 1.5 mtr above starting point all as specified and directed.

M&L for sand filling with clean dry fine sand unwashed including gently punning around cables in trenches for cable protection (8 cm below cable & 15 cm above cable) complete all as specified and directed. Note:-Compacted/punned thickness shall be measured & paid.

Supply and laying of factory made precast concrete cable cover, class LV, Type I, flat, size 250 x 150 x 40 mm for cable protection cover laid flat and dry in trenches over the cable perpendicular to the direction of cable complete all as specified and directed.

Supply, laying, connecting and testing LT XLPE insulated, screened, PVC bedded, armoured, heavy duty cable with aluminium conductor of size 50 Sqmm, 3.5 core, 1100 volts grade, laid in trenches, passing through pipes/ducts, etc; including taking out old unserviceable cable, any type complete all as specified and directed.

S&F of 25 mm GI tubing light grade (as per IS -1239) with all fittings as required for passing through cables under floors, along the wall/ pole, etc; complete all as specified and directed.

S&F in repairs 20 mm bore GI tube medium grade with all necessary fittings and fixed to wall and ceiling or laid in floors complete all as specified and directed.

S&F in repairs 25 mm bore GI tube medium grade with all necessary fittings and fixed to wall and ceiling or laid in floors complete all as specified and directed.

S&F in repairs Gun-metal gate valves of size 20 mm with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in repairs Gun-metal gate valves of size 25 mm with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

Deduct schedule of credit (calculation will be done off line) Rs. 56361.00