SPECIAL REPAIR TO BLDG NO P 17 AND P 17A OF ENGR REGT PROVISION OF TOILET BLOCK NEAR BLDG NO P 19 FOR INT AND GS UNIT AND PROVISION OF SHED AT PANTHER RIDING SCHOOL AT OLD AMRITSAR CANTT

Amount

Dismantling Brick tiles or terracing tiles, single layer on roofs ; complete all as specified & directed by the Engineer-in-Charge.

Demolition mud in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof) ; complete all as specified & directed by the Engineer-in-Charge.

Material and Labour for PCC 1:2:4 type B-1 (using 20mm graded stone aggregates) as in padding concrete fair finish, roof kerbs or mud stops, rounded or chamfered on edges and like including weathering slight rounded and throating ; complete all as specified & directed by the Engineer-in-Charge.

Material and Labour for applying evenly a tack coat of industrial bitumen 85/25 grade @ 1.2 Kg/Sqm including cleaning surfaces etc ; complete all as specified & directed by the Engineer-in-Charge.

Supply and Fixing (minimum) 3mm thick APP film based poly meric membrance minimum weighing 3Kg per Sqm reinforced with polyester non wove fabric (weight not less than 150 gms/sqm) land on primed surface by forced application over entire roof area with over lapping 100mm to either sides and sealed in after cleaning down the roof by brooms ; complete all as specified & directed by the Engineer-in-Charge.

Material and Labour for 40mm thick brick tiles, laid on and including 15 mm thick cement mortar 1:6 and joints grouted and pointed flush in CM 1:3 mixed with 5% crude oil by weight of cement ; complete all as specified & directed by the Engineer-in-Charge.

All as per Srl Item No. 06 here-in-before but except brick tiles ; complete all as specified & directed by the Engineer-in-Charge. Note:-Old serviceable tiles shall be reused.

Disconnecting existing tanks 500ltr capacity, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position including Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc ; complete all as specified & directed by the Engineer-in-Charge.

Demolition of brickwork, built in cement mortar including all quoins, arches, pillars, etc ; complete all as specified & directed by the Engineer-in-Charge.

Material & Labour for brick work with sub class "B" bricks (old size) straight or curved on plan exc 6 m mean radius, built in CM 1:6 ; complete all as specified & directed by the Engineer-in-Charge.

Taking down cement plaster of any description on brick walls, etc including raking out joints, hacking for key scrubbing down with water etc ; complete all as specified & directed by the Engineer-in-Charge.

Material & Labour for rendering 15 mm thick on brick work or concrete surfaces on walls in CM 1:6 finishing even and smooth without using extra cement ; complete all as specified & directed by the Engineer-in-Charge.

Material & Labour for for rendering 15 mm thick on brick work or concrete surfaces on walls in CM 1:4 finishing even and smooth without using extra cement ; complete all as specified & directed by the Engineer-in-Charge.

Material & Labour for rendering 10 mm thick on brick work or concrete surfaces on ceiling in CM 1:3 finishing even and smooth without using extra cement; complete all as specified & directed by the Engineer-in-Charge.

Material & Labour for PCC 1:1.5:3 type B0 using 12.5 mm graded stone aggregate for repair of Chajja, Fascia, parapets etc using chicken wiremes upto 8 m height including necessary formwork, scaffolding. And applying two coats of cement base paint over coat of primer over cement plaster 1:4 ; complete all as specified & directed by the Engineer-in-Charge.

Material & Labour for for applying two coats of whitewash on ceiling including preperation of newly plastered/old decorated surfaces ; complete all as specified & directed by the Engineer-in-Charge.

Material and labour preparation of newly plastered surface of wall and Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats on new work ; complete all as specified & directed by the Engineer-in-Charge.

Material & Labour for preparation of NEW plastered surfaces and Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) ; complete all as specified & directed by the Engineer-in-Charge.

Material & Labour for preperation of OLD decorated surfaces of walls by scraping and washing down with, removing all acales/dirts and greasy spots and applying one coat of oil bound distemper over and incl incl applying plaster of paris putty of 1mm thickness to prepare the surface even and smooth ; complete all as specified & directed by the Engineer-in-Charge.

Hacking out old broken glass from wooden/ steel window cleaning the surface and removing from the site, thenafter Supply & Fixing for clear glass, 3mm thick ordinary quality, in any shape, not exceeding 0.50 sqm in each pane including and glazing with oil putty/wooden beading as per site requiremnets ; complete all as specified & directed by the Engineer-in-Charge.

Supply & Fixing for repair Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples in steel window/wooden door shutter ; complete all as specified & directed by the Engineer-in-Charge.

Supply & Fixing for repair Helical door spring 300mm, ordinary rat tail rod pattern springs, including roller and roller plate fixed to iron chowkats with weilding ; complete all as specified & directed by the Engineer-in-Charge.

Supply & Fixing for factory made 30 mm thick flush shutters solid core construction with block board core and plywood face panels ; complete all as specified & directed by the Engineer-in-Charge.

Supply & Fixing for IInd class hard wood Glazed and skeleton shutters 35mm thick divided into square, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8 clause 8.24 (a) ; supplied and fitted to chowkats ; complete all as specified & directed by the Engineer-in-Charge.

Material & Labour for two coats of synthetic enamel painting on wooden surfaces of any description over 10 cm in width or girth not otherwise described above pink primer including prepration of previously untreated surfaces ; complete all as specified & directed by the Engineer-in-Charge.

Material & Labour for apply One coat of synthetic enamel pain on steel surfaces of any description over 10 cm in width or girth not otherwise described including prepration of OLD surfaces ; complete all as specified & directed by the Engineer-in-Charge.

Material & Labour for One coat of synthetic enamel painting on wooden surfaces of any description over 10 cm in width or girth not otherwise described including prepration of OLD surfaces ; complete all as specified & directed by the Engineer-in-Charge.

Supply & Fixing for 300mm long Aluminium alloy, Anodised, sliding door bolt with hasp, staple ( bolt type) and fixing clips of sheet , cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed ; complete all as specified & directed by the Engineer-in-Charge.

Supply & Fixing for Aluminium, anodised, barrel tower bolts 150mm of extruded section and fixed ; complete all as specified & directed by the Engineer-in-Charge.

Supply & Fixing for 150mm long Aluminium handles, cast type anodised ; complete all as specified & directed by the Engineer-in-Charge.

Supply & Fixing for stainless steel butt Hinges, 100mm size, medium weight, cold rolled mild steel ; complete all as specified & directed by the Engineer-in-Charge.

Material and Labour for Box type steel window made of ERW tube P- section of size 60 mm x 25 mm double rebated outer frame, comprises glazed skelton & gauzed shutter of ERW tube P-Section size 50mm x 20mm with one/two Nos openable leaf for each shutter consisting of two Nos Sashbar of T-section 20 x 3 mm welded to frame with one No verticle mullion of ERW box type T Section of size 60mm x 25mm and FI 2mm thick welded/screwed to frame for fixing of glass including fittings and fixture like as Handle, Tower Bolt, Stopper, Cleat, Pintal hinges, holdfast etc as given below all as shown on drg No CEJZ/TD-1020/08 Sh 1/3 to 3/3 dt 01 May 2008 complete all as specified and directed.(a) Hold fast 150mm long of 12mm x 3mm MS flat - 4 Nos per Window.(b) Handle of Z section 20mm x 25mm, 100mm long- 01 No per leaf.(c) MS tower bolt 150mm long - 02 Nos/leaf.(d) Z Section stopper 20mm x 25mm, 100mm long - 01 No per leaf.(e) Cleat 55mm long of hollow square 15mmx12mm - 02 Nos per leaf.(f) MS pintol hinges size 75mmx12mm - 2 Nos per leaf Note :- Sheet glass, wire mesh and painting shall be measured and paid sperately ; complete all as specified & directed by the Engineer-in-Charge.

Material and Labour for Box type steel ventilator made of ERW tube P-section of size 60mmx25mm outer frame ( single rebated), comprises glazed shutter, frame of ERW tube and FI 2mm thick welded/screwed to frame for fixing of sheet glass including fixture and fittings like as Stopper, Cleat, Pintal hinges, holdfast etc all as shown on drg No CEJZ/TD1019/08 sheet 1/3 to 3/3 dt 01 May 2008 ; complete all as specified & directed by the Engineer-in-Charge. NOTE:-Sheet glass and painting shall be measured and paid Separately.

Supply & Fixing for pressed steel frames 1.25mm thick for door size of frame 125 x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate and tarring to inner surface (surface in contact with concrete/brick surface) of chowkats and hinges ; complete all as specified & directed by the Engineer-in-Charge.

Material & Labour for PCC 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) in bed blocks for hold fast & similar work etc ; complete all as specified & directed by the Engineer-in-Charge.

Taking down chowkhat with shuttering (without taking off shutters from frame including grill & guard bars) size of shutter not exceeding 1.5 sqm each ; complete all as specified & directed by the Engineer-in-Charge.

All as per Srl item No 39 above but size of opening exceeding 1.5 Sqmtr but not exceeding 4 Sqmtr ; complete all as specified & directed by the Engineer-in-Charge.

Taking down shutters of any description size of shutter exc 1 sqm but n.exc 2 sqm ; complete all as specified & directed by the Engineer-in-Charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tiles to store and rubbish off the premises ; complete all as specified & directed by the Engineer-in-Charge.

Supply & Fixing for non skid ceramic light coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles over and including 15mm thick screed bed in CM 1:6 & ; complete all as specified & directed by the Engineer-in-Charge.

Supply & Fixing for glazed ceramic coloured tiles 450x300mmx6mm thick, etc. on vertical surfaces such as skirting , dados and risers to steps etc. set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match over and including 10mm thick rendering plaster in CM 1:4 on brick surface; complete all as specified & directed by the Engineer-in-Charge.

Material & Labour for Vitrified ceramic light shade tiles 10mm thick (Square/ rectangular) polished, area of each tiles n.exc 0.36 sqm in floors and skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of cement mortar(1:6) 15mm thick for laying floor finishes ; complete all as specified & directed by the Engineer-in-Charge.

Supply & Fixing for repair of One piece ceramic floor/wall mounted EWC with features like twin flush system, noisless soft close seat cover, anty-bacterial surface white with PVC(SWR) 'P' / 'S' trap 110/110mm bore complete all as specified and directed. Make: CERA/Jaquar ; complete all as specified & directed by the Engineer-in-Charge.

Supply & Fixing for PVC Jet spray suitable for EWC ; complete all as specified & directed by the Engineer-in-Charge.

Supply and fixing Chromium plated Health faucet in repair with 1.5 metre long chain ; complete all as specified & directed by the Engineer-in-Charge.

Supply & Fixing for repairs centre hole wall mixer cast coppre alloy chromium plated with capston head srewed down high pressure with lettered hot or cold with long screwed shanks fly nut screwed for iron pipe 15mm dia complete all as specified. Make: CERA/Jaquar/Somany/Parryware ; complete all as specified & directed by the Engineer-in-Charge.

Supply & Fixing for repair WHB mixture Pillar taps 15mm bore, cast copper alloy , with capstan heads, chromium plated , screwed down high pressure , with or without l'ettered ' 'HOT' or 'COLD' with long screwed shanks and fly-nuts , screwed for iron pipe and fixed. Make: CERA/Jaquar ; complete all as specified & directed by the Engineer-in-Charge.

Supply & Fixing for Vanity of size 820x450mm with vitreous China wash basin white,with suitable size including CP waste coupling 32mm bore,waste PVC pipe ; complete all as specified & directed by the Engineer-in-Charge.

Supply & Fixing for repairs glass shelve assembly 60cm in oval shape consisting 5.5mm to 8mm thick glass including CP guard railing with double rail ; complete all as specified & directed by the Engineer-in-Charge.

Supply & Fixing for Sheet glass corner shelf assembly consisting of 5.5mm thick sheet glass corner shelf with chromium plated bracket guard and railing ; complete all as specified & directed by the Engineer-in-Charge.

Supply & Fixing for PVC connection 15mm size with PTMT nuts of length 600mm ; complete all as specified & directed by the Engineer-in-Charge.

S/F in repair15mm bore type angle cock cast copper alloy CP screwed down high pressure with crutch or butterfly handle ; complete all as specified & directed by the Engineer-in-Charge.

Supply & Fixing for repair of brass cromium brass plated fancy type bib taps 15 mm bore long nose screwed down screwed for iron pipe or for brass ; complete all as specified & directed by the Engineer-in-Charge.

Supply & Fixing for in repairs 100mm dia CP grating with or without hole type ; complete all as specified & directed by the Engineer-in-Charge.

Supply & Fixing for repairs CP brass towel rail of 20mm dia and 600mm long ; complete all as specified & directed by the Engineer-in-Charge.

Supply & Fixing for 15mm bore tubes (medium grade) galvanised with all fittings and fixed to walls and ceiling or laid in floors complete including taking down ; complete all as specified & directed by the Engineer-in-Charge.

Supply & Fixing for 20mm bore tubes (medium grade) galvanised with all fittings and fixed to walls and ceiling or laid in floors complete including taking down ; complete all as specified & directed by the Engineer-in-Charge.

Supply & Fixing for CP (Box type) toilet paper holder fixed to walls with chromium plated (CP) brass screws ; complete all as specified & directed by the Engineer-in-Charge.

Supply & Fixing for repair vitreous China Squatting pan 'Orrisa' pattren size 580x440mm white with integral foot rest and PVC(SWR) 'P' trap 110/110mm bore complete. Note:-Rate of supply for Flushing cistern, flush pipe, seat cover etc have been taken separately ; complete all as specified & directed by the Engineer-in-Charge.

Supply only 10 Ltr capacity PVC valveless symphonic action type flushing cistern white low level with ball valve flote handle including bracket and flush pipe of polythylene of low or high density or PVC,32mm dia ; complete all as specified & directed by the Engineer-in-Charge.

S/F in repair15mm bore Concealed type stop cock cast copper alloy CP screwed down high pressure with crutch or butterfly handle ; complete all as specified & directed by the Engineer-in-Charge.

Supply & Fixing for repairs 125mm CP shower rose fancy type with CP arm ; complete all as specified & directed by the Engineer-in-Charge.

Supply & Fixing for repair PVC (SWR) pipe 75mm dia fixed in wall/floor ; complete all as specified & directed by the Engineer-in-Charge.

PVC (SWR) pipes single110mm socketed, in any length with rubber ring joints, laid in trenches or in floors/wall ; complete all as specified & directed by the Engineer-in-Charge.

Supply & Fixing for repair 75mm PVC (SWR) bends any radius ; complete all as specified & directed by the Engineer-in-Charge.

Supply & Fixing for repair 110mm PVC (SWR) bends any radius ; complete all as specified & directed by the Engineer-in-Charge.

Supply & Fixing for repair 75mm PVC floor trap complete all as specified ; complete all as specified & directed by the Engineer-in-Charge.

PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement ; complete all as specified & directed by the Engineer-in-Charge.

Supply & Fixing for Solid PVC Door Frame of Size 50mm x 47mm made out of 5mm plain colour PVC Sheet reinforced with MS Square tube in opening as per specification and frawing ; complete all as specified & directed by the Engineer-in-Charge.

Supply & Fixing for 28 to 30 mm thick (Rajshri brand) factory made solid PVC moulded Door shutter with 2,3 or6 raised psnel design with 2mm thick moulded PVC Sheet on the front face and 2mm plain colour PVC Sheet on back face, fixing in frame at site as per specification and drawing ; complete all as specified & directed by the Engineer-in-Charge.

Supply & Fixing for rotational moulded polythene water storage tanks of 1000 litre capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-1 including Ball valves high pressure PTMT with epoxy coated Aluminium rod & High density plastic ball screwed for iron pipe and fixed to GI pipe of 20mm bore ; complete all as specified & directed by the Engineer-in-Charge.

Dismantling boarding , any description , fixed in any position with screws ; complete all as specified & directed by the Engineer-in-Charge.

Material and Labour fixed for repairs 18/19mm thick Prelaminated HDHMR board, interior grade, with decorative choice lamination, fixed with screws as in shelves/Shutters ; Complete all as specified and directed by Engineer-in-charge.

Supply and Fixing for Godrej type cupboard shutter 1.00 mm thick fitted in frame of 35x35x6mm thick including necessary fitting such as handle, lugs, locking arrangement and including shop coat of primer and n. exc 2.00 sqm area of cupboard ; complete all as specified & directed by the Engineer-in-Charge.

Demolition of cement concrete in ground floors and paving not exceeding 15 cm thickness ( below or above ground level) and disposing the rubbish to a distance exceeding 50 Mtr but not exceeding 100 Mtr away to low lying areas ; complete all as specified & directed by the Engineer-in-Charge.

Material & Labour for 75mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) in sub base of floor ; complete all as specified & directed by the Engineer-in-Charge.

Material & Labour for Chequered cement concrete tiles 30cm x 30cm x 25mm thick over and including 15mm thick bedding layer in cement mortar 1:6,set and jointed in neat cement slurry and pointed in grey cement and pigment to match the colour of tiles complete all as specified and directed by Engr-in-charge.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and raming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50m and making good surface soft/loose soil ; complete all as specified & directed by the Engineer-in-Charge.

PCC (1:3:6) type C-2 using 40mm graded stone aggregate as in foundation etc, ; complete all as specified & directed by the Engineer-in-Charge.

Removing excavated material (soil) exc 250 m but n.exc 500 m and depositing where directeD ; complete all as specified & directed by the Engineer-in-Charge.

Supply & Fixing for mild steel Gde Fe-410-W as in roof trusses, (framed), trussed purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee,angle,channel or flat sections) including distance pieces , cleats etc ; complete all as specified & directed by the Engineer-in-Charge.

Supply & Fixing for for mild steel work as in post and struts including embeding in concrete and screwing etc ,wind tie of roof including securing with bolts complete ; complete all as specified & directed by the Engineer-in-Charge.

Supply & Fixing for mild steel flate iron work all as specified MS Plates including drilling holews, notching for screwed, rebating or welding comolete ; complete all as specified & directed by the Engineer-in-Charge.

Supply & Fixing for mild Secrew bolt ( Machine made ) with hexagonal or square head at one end and screwed the other , or screwed both ends each secrewed end to be fitted with washer and one hexagonal or square nuts. exc 10 but n exc 15 cm long ; complete all as specified & directed by the Engineer-in-Charge.

Supply & Fixing for prepainted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength 550 MPA as in roof covering in roof covering incudingl ridge fixed with self tapping screws / L type or J type hook as specified ; complete all as specified & directed by the Engineer-in-Charge.

Supply & Fixing for 0.50 mm plain, galvanised, mild steel sheeting, in ridges,hips, valley gutters, drip and straight flashings length and girth as fixed) with grade of zinc coating 275 ; complete all as specified & directed by the Engineer-in-Charge.

Material & Labour brick work with sub class 'B' bricks straight curved on plan exc 6 mean radius built in CM 1:6 ; complete all as specified & directed by the Engineer-in-Charge.

Material & Labour for for Rendering 15 mm thick on fair/unfair faces of brick work or concrete surfaces in CM 1:4 and to be finished even and smooth ( without using extra lime or cement) ; complete all as specified & directed by the Engineer-in-Charge.

Material & Labour for broken bricks Hardcore of gauge n exc. 63 mm, deposited , spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface ; complete all as specified & directed by the Engineer-in-Charge.

Material & Labour for 75mm thick Cement concrete type D2, 1:4:8 using 40mm graded agregate as in sub base of floor; complete all as specified & directed by the Engineer-in-Charge.

Material & Labour for 75mm thick PCC 1:3:6 type C 2 as in plinth protection finishing the surface even and fair with out using extra cement laid to a slope of 1 to 20. It shall be laid in alternate bays, each bay not exceeding 3 m in length with joint to be filled with bituminous mastic filling comprising of misture of one part of heated not blown bitumen 85/25 penetration and three parts of heated sand ; complete all as specified & directed by the Engineer-in-Charge.

Supply & Fixing for Machine cut kota stone slab flooring 20-25mm thick over 15mm thick cement screed bed in cement mortar 1:3 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete ; complete all as specified & directed by the Engineer-in-Charge.

Material & Labour for glazed ceramic coloured tiles in vertical surface of size 450x350x6-7mm thick joint free on and incl 10mm thick screed bed in cm(1:4)set and jointed in neat cement slurry and pointed in colored cement mixed with pigment to match the colour of tiles ; complete all as specified & directed by the Engineer-in-Charge.

Material & Labour for preparation of new or previously untreated steel and iron surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enemel paint over a coat of red oxide ; complete all as specified & directed by the Engineer-in-Charge.

Excavating in trenches, exc 1.5m wide and n exc 1.5 m depth; for foundation, etc. or for shafts, wells, cesspits, manholes,pier holes, etc. n exc 10 sq m on plan and n exc 1.5m in depth and getting out soft loose soil ; complete all as specified & directed by the Engineer-in-Charge.

Returning, filling in, including spreading, levelling , watering and well ramming in layers not exc 25 cm ; complete all as specified & directed by the Engineer-in-Charge.

Removing excavated material n exc. 50 m and depositing where directed at a level n exc. 1.5 m above the starting point ; complete all as specified & directed by the Engineer-in-Charge.

Material & Labour for for broken bricks Hardcore of gauge n exc. 63 mm, deposited , spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface ; complete all as specified & directed by the Engineer-in-Charge.

Material & Labour for Cement concrete type D2, 1:4:8 using 40mm graded agregate as in foundations, filling and mass concrete ; complete all as specified & directed by the Engineer-in-Charge.

Material & Labour for brick work with sub class 'B' bricks straight curved on plan exc 6 mean radius built in CM 1:6 ; complete all as specified & directed by the Engineer-in-Charge.

Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:6 ; complete all as specified & directed by the Engineer-in-Charge.

Material & Labour for for Reinforced Cement concrete type B-1 1:2:4 using 20mm graded aggregate (Nominal mix) as in slabs supported on walls, beams and columns , in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like ; complete all as specified & directed by the Engineer-in-Charge.

Material & Labour for RCC type B1, 1:2:4(20 mm graded aggregate) as in Beams, canatilivers, bressummers, lintels over 1.5m span etc ; complete all as specified & directed by the Engineer-in-Charge.

Material & Labour for Flat Formwork to sides and soffits of floor or roof beams, beam haunchings, girders,bresumers, lntels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams etc.for rough finished surfaces of concrete surface ; complete all as specified & directed by the Engineer-in-Charge.

Material & Labour for Flat Form work to soffits of suspended slabs, floor slabs, landings and similar work; not exceeding 200 mm thick ( Horizontal or sloping) or rough finished surfaces of concrete surface ; complete all as specified & directed by the Engineer-in-Charge.

Mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire ( annealed) not less than 0.90 mm dia. Or securing with clips; complete all as specified & directed by the Engineer-in-Charge.

Mild steel TMT bars 6 mm to 8 mm dia., cut to length, bent to shape required, including cranking, bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire ( annealed) not less than 0.90 mm dia. Or securing with clip; complete all as specified & directed by the Engineer-in-Charge.

Material & Labour for Rendering 15 mm thick on fair/unfair faces of brick work or concrete surfaces in CM 1:6 and to be finished even and smooth ( without using extra lime or cement) ; complete all as specified & directed by the Engineer-in-Charge.

Material & Labour for Rendering 15 mm thick on fair/unfair faces of brick work or concrete surfaces in CM 1:4 and to be finished even and smooth ( without using extra lime or cement) ; complete all as specified & directed by the Engineer-in-Charge.

Material & Labour for for Rendering 10 mm thick on fair faces of brick work or concrete surfaces in CM 1:3 as on ceiling and to be finished even and smooth ( without using extra lime or cement) ; complete all as specified & directed by the Engineer-in-Charge.

Supply & Fixing for powder coated anodised aluminium ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc(Thickness or powder coating not less than 50 micron) ; complete all as specified & directed by the Engineer-in-Charge.

Supply & Fixing for powder coated aluminium frame for doors ,windows, ventilators with one or more rebates including joining cleats for fixing complete all as specified and directed by Engineer-In-Charge.( Min. thickness of powder coating 50 micron) ; complete all as specified & directed by the Engineer-in-Charge.

Supply & Fixing for, Tinted Sheet glass, 5.5mm thick ordinary quality, in squares,exceeding 0.50 sqm in each pane including rubber packing and aluminium beading as per instructions of manufacturer ; complete all as specified & directed by the Engineer-in-Charge.

Factory made single extructed WPC but frame size 50x 100 mm (wood polymer Composite) solid door/window/Ceosetory windows & other Frames/Chowkhat of size 45 x 70mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), Calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum,screw withdrawel strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2,modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof,water/moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length ; complete all as specified & directed by the Engineer-in-Charge.

Factory made single extructed WPC (wood polymer Composite) solid Plain flush door shutters of 30 mm thick comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), Calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minumum dencity of 650 kg/ cum and screw withdrawa strenth of 1800 N (Face )&900 N (Edge), minimum compressive strength of 50 N/mm2,modules of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof,water/moisture proof and fire retardant and fixed with steelness steel butt hinges of requred size with necessary full body threank SS screw all as direction of engr in charge ( steelness srew and butt hinges and necessary SS Screw shall be paid separatly) ; complete all as specified & directed by the Engineer-in-Charge.

Material & Labour for Galvanised mild steel wire cloth, 0.63 mm nominal dia. of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or galvanised wire staples ; complete all as specified & directed by the Engineer-in-Charge.

Supply & Fixing for 100mm longe Butt Hinges, medium weight, cold rolled mild steel and fixed ; complete all as specified & directed by the Engineer-in-Charge.

Supply & Fixing for 150mm long aluminium, anodised, barrel tower bolts of extruded section and fixed ; complete all as specified & directed by the Engineer-in-Charge.

Supply & Fixing for Aluminium handles, 150mm size cast type anodised ; complete all as specified & directed by the Engineer-in-Charge.

Supply & Fixing for 200mm Aluminium alloy. Anodised, sliding door bolt with hasp, staple ( bolt type) and fixing clips of sheet , cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed ; complete all as specified & directed by the Engineer-in-Charge.

Material & Labour for preparation of newly plastered surface of wall and applying two coats cement base paint over a coat of primer to match the existing treatment; complete all as specified & directed by the Engineer-in-Charge.

Material & Labour for preparation of new plaster surface and applying two coats of white wash on wall ; complete all as specified & directed by the Engineer-in-Charge.

Material & Labour for preparation of new plaster surface and applying two coats of white wash on ceiling ; complete all as specified & directed by the Engineer-in-Charge.

Supply & Fixing for non skid ceramic light coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles over and including 15mm thick screed bed in CM 1:6 & ; complete all as specified & directed by the Engineer-in-Charge.

Supply & Fixing for glazed ceramic coloured tiles 450x350mmx7mm thick, etc. on vertical surfaces such as skirting , dados and risers to steps etc. set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match over and including 10mm thick rendering plaster in CM 1:4 on brick surface; complete all as specified & directed by the Engineer-in-Charge.

Material & Labour for Cement concrete 50 mm thick type C-2 (1:3:6) using 40 mm graded stone aggregate as in plinth protection etc finished even and smooth using extra cement ; complete all as specified & directed by the Engineer-in-Charge.

Supply & Fixing for PVC (SWR) floor trap (Dia of outlet pipe 75mm), plain with grating including jointing with cement ; complete all as specified & directed by the Engineer-in-Charge.

Supply & Fixing for (SWR) pipes of 75mm dia single socketed, in any length with rubber ring joints, laid in trnches or in floors ; complete all as specified & directed by the Engineer-in-Charge.

Supply & Fixing for 110mm bore PVC (SWR) ISI marks pipes single socketed in any length with rubber ring joints fixed to wall or floor ; complete all as specified & directed by the Engineer-in-Charge.

Supply & Fixing for of Vitreous china wash down water closet pan( pedestal pattern), white with PVC(SWR) 'P' trap 110/110mm bore complete all as specified and directed. Note:-Rate of supply for Flushing cistern, flush pipe, seat cover etc have been taken separately ; complete all as specified & directed by the Engineer-in-Charge.

Supply only 10 Ltr capacity PVC valveless syphonic action type flushing cistern white low level with ball valve flote handle including bracket and flush pipe of polythylene of low or high density or PVC,32mm dia ; complete all as specified & directed by the Engineer-in-Charge.

Supply & Fixing for of Plastic water closet seat, back, closed pattern with flat bottom , and cover and mild steel chromium plated or aluminised hinging device ; complete all as specified & directed by the Engineer-in-Charge.

Supply & Fixing for vitreous China wash basin pedetal pattern white, flat back size550x400mm of pedestal type including CP waste coupling 32mm bore, fancy type CP brass Pillar Tap 15mm bore ; complete all as specified & directed by the Engineer-in-Charge.

Supply & Fixing for PVC connections 15 mm size with PTMT nuts of length 450mm ; complete all as specified & directed by the Engineer-in-Charge.

Supply & Fixing for 15mm bore/pillar cock CP Stop valves, cast copper alloy, screwed down , high pressure, with crutch or butterfly handles , screwed both ends for iron pipe or for unions and fixed ; complete all as specified & directed by the Engineer-in-Charge.

Supply & Fixing for Chromium plated Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed; complete all as specified & directed by the Engineer-in-Charge.

Supply & Fixing for repairs for brass chromium plated shower rose 125 mm size with swivel joint including fixing to 15mm dia steel pipe or union ; complete all as specified & directed by the Engineer-in-Charge.

Supply & Fixing for repair glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with plated bracket guard and railing 60cm long ; complete all as specified & directed by the Engineer-in-Charge.

Supply & Fixing for repair Brass chromium plated Tubular towel rail 20mm dia, D type, 60cm long between flanges ; complete all as specified & directed by the Engineer-in-Charge.

Supply & Fixing for 20mm bore steel water tubes, 'medium grade' ,galvanised , with all fittings ; and fixed complete to walls and ceilings or laid in floors ; complete all as specified & directed by the Engineer-in-Charge.

Supply & Fixing for 15mm bore steel water tubes, 'medium grade' ,galvanised , with all fittings ; and fixed complete to walls and ceilings or laid in floors ; complete all as specified & directed by the Engineer-in-Charge.

Supply & Fixing for for 500ltr capacity rotational moulded polyethylene water storage tanks (cylinderical vertical with closed top) hoisted and fixed in position incl 20mm bore ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed. .(Minimum weight 15mm-142gms/ 20mm-210 gms./25mm-455gms/ 40mm - 690 gms) ; complete all as specified & directed by the Engineer-in-Charge.

Supply & Fixing for Soap dish, any type, fixed to plugs with chromium plated brass screws ; complete all as specified & directed by the Engineer-in-Charge.

Supply & Fixing vitreous china urinal half stall type with CP spreader and CP waste coupling with grating and union for discharge pipe, including providing and fixing plug, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement fixing with brackets, flush pipe, grating and union for discharge pipe ; complete all as specified & directed by the Engineer-in-Charge.

Supply & Fixing for PVC waste pipe for urinals/WHB of 32mm dia and fixed ; complete all as specified & directed by the Engineer-in-Charge.

Supply & Fixing for grating doom 100mm dia of PTMT.(minimum weight 25gms) ; complete all as specified & directed by the Engineer-in-Charge.

Material & Labour for point wiring for One light point/Fan point controlled by one switch/regulator complete with 1.5 sqmm single core PVC insulated unsheathed multi-stranded, copper conductor FRLS grade cable of 1100 volts grade conforming to IS:694 drawn through and including non metalic rigid PVC conduit medium grade, ISI marked, not less than 20mm bore with conduit accessories concealed on wall and ceiling/roof etc, with provn for fixing modular metal flush boxes not less than 1.2 mm thick of suitable modules, concealed in walls with modular white plated cover 3mm thick as top cover fixed with screws for housing switches, socket outlets, fan regulators etc, including provn of 1.5 sqmm nominal cross sectional area, PVC insulated, FRLS, unsheathed, 1100 volt grade,multistranded single core green colour copper conductor for earth continuity connected to earth dolly complete all as directed for the following:- NOTE: (i) Modular metal flush boxes concealed in wall with suitable cover plate for mounting switch, sockets, regulator etc. and cost of cutting chases & making good as existing to disturbed surface with cement mortar, if required any shall be deemed to included in the quoted rates. (ii) Modular fittings/fixtures such as switch, socket, regulator, etc., shall be measured and paid separately as under relevant item. ; complete all as specified & directed by the Engineer-in-Charge.

All as per ser item No. 01 above but for One 3 pin 5 Amps socket outlet on independent board ; complete all as specified & directed by the Engineer-in-Charge.

All as per ser item No. 01 above but point wiring with 4.0 Sqmm FRLS cable and 4.0 sqmm cable earth continuity wire for one 3 pin socket outlet,15 Amps on independent board ; complete all as specified & directed by the Engineer-in-Charge.

Supply & Fixing for modular switch 1 way 6A, 240 volts, 1 module ; complete all as specified & directed by the Engineer-in-Charge.

Supply & Fixing for modular switch 1 way 16A, 240 volts, 1 module ; complete all as specified & directed by the Engineer-in-Charge.

Supply & Fixing for modular socket, 6A, 240 volts, 2/3 pin combined 2 module, flush type ; complete all as specified & directed by the Engineer-in-Charge.

Supply & Fixing for modular socket, 6A/16A, 240 volts, 2/3 pin combined 2 module flush type ; complete all as specified & directed by the Engineer-in-Charge.

Supply & Fixing for ceiling rose surface PVC/Polycarbonate, isolated body with face Bakelite 65x50 mm three terminal ; complete all as specified & directed by the Engineer-in-Charge.

Material & Labour for distribution board made out of sheet metal enclosure (CRCA sheet) dust and vermin proof, double door, SPN 4 way, 240 volts grade with 200 Amps insulated rated bus bar, earth bar IP- 43 & IK-09, door earthing flush to wall, including testing suitable for fixing MCB SPN, SP etc, ; complete all as specified & directed by the Engineer-in-Charge.

Supply & Fixing for MCB of SP 5 to 32 Amps current carrying capacity, 240V, 10KA 'C' curve fixed in the MCB DB complete with connection testing and commissioning including taking down old unsv one from the site ; complete all as specified & directed by the Engineer-in-Charge.

All as per ser item No. 08 above but for MCB SPN 32 Amps ; complete all as specified & directed by the Engineer-in-Charge.

Supply, install & testing exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, single phase, 1200 RPM, Copper winding of sweep 250mm complete fixed/grouted to wall with suitable bolts, nuts etc., and connecting up with & including 3 core flexible copper conductor cable (1.0 mm² size/core) from ceiling rose to exhaust fan and writing MES No. including cutting hole suitable for fixing exhaust fan ; complete all as specified & directed by the Engineer-in-Charge. Make: Havells or equivalent in Orient/Crompton

Supply & Fixing for LED lights fitting 1x 20W, 220V, AC, 5700K, decorative box type with driver, double sided connection, CRI> 80, PF>95%, THD<10%, Lumen>2100 lm including LED tube light connecting up ; complete all as specified & directed by the Engineer-in-Charge.

Supply & laying in trenches/drawn through pipes or in road crossing/floors/along poles/equipments etc., of XLPE insulated, armoured with multistranded aluminium conductor cable conforming to IS-7098 Part-I (1998), heavy duty, 1100 Volts grade of size 2 core 6 sqmm nominal cross sectional area including necessary double compression copper gland and connecting up using suitable size aluminium lugs testing, incl taking down old unsv one from site ; complete all as specified & directed by the Engineer-in-Charge.

Supply & Fixing for storage electric heater (Geyser), flexible mounting of capacity 25 ltrs, single phase, 240 volts, AC, white colour, with incoloy heating element and PUF insulation, ISI marked BEE 5 star rated complete with high precision & externally adustable capillary thermostat for temp regulation, backup safety overheating capillary therrmal cut out at 95ºC, temperature display, etc., including provn of suitable holding clamp, MS bolts, grouted to wall and connecting up including 3 core sheathed multi-stranded flexible copper conductor cable connected with 15/16 Amp plug top and provn of water connections with new PVC steel braided inlet/outlet connection pipe 15mm dia, 450mm long with two numbers union, NRV of suitable size, check/end nuts with washers, 15mm dia 100mm long nipples (02 Nos) for hot water and cold water connections and making good to the disturbed surface in cement morter as required and testing complete all as directed NOTE: Cost of flexible copper cable of 3 core, PVC steel braided inlet/outlet pipe of 15mm dia, 450mm long with brass union, NRV, check/end nuts, nipples, MS bolts, etc., and minor parts, if any, other than those are not specified in the schedule and required for smooth functioning of geyser will be deemed to be included in the quoted rate ; complete all as specified & directed by the Engineer-in-Charge.

ESS KAY BUILDER (BID ID -3197428)

H S SETHI and CO (BID ID -3203112)

RAJ KAMAL BUILDERS (BID ID -3202533)