Supply installation testing and commissioning of MachPulse IoT based Smart Wireless Vibration Sensor and WEB SCADA monitoring Electromagnetic Flowmeter for Raw water VT Pumps of 5MLD at Dabose Water Treatment Plant in Valpoi Constituency

Supply,installation,testing commissioning of MachPulse-IoT based Smart Wireless Vibration Sensor (6 nos) –Tri axial Vibration Velocity & Acceleration with built in temperature sensor for skin temperature measurement and condition monitoring system for VT Pumps (2 nos) inclusive of accessories like Glue mounting adapter, Gateway (data communicator), Gateway Enclosure etc with following features Wire less accelerometer One sensor measure H,V, A vibrations along with bearing temperature Mounting on machine by Mounting studLong battery life Communicates with Wireless Hub Wireless Hub communicates with cloud based wireless software Transmits overall vibration data ,temperature data

WEB SCADA monitoring Flowmeter data of 10MLD raw water at WTP Daboss including Supply , installation ,testing and commissioning of 110 wattL/12v luminous solar Panel with SCC 1220 charge controller ,Powder coated panel 500m X 500mm X 500mm with stand including one year DATA PACK for transmitting data from MODEM to Server along with RS 485 RTU

Supplying installation testing and Commissioning of Full Bore Carbon Steel Flanged ends Electromagnetic Flow Meter (FBEM) for Raw/ treated water with accuracy+/-0.5% and sensor of protection of IP 68 Grade for pressure rating PN 16 including sensor coil housed in Cast Aluminium/ Carbon Steel with anti-corrosive food grade powder coating; Co­axial signal sensor/ transmitter & power cable routed through duct of 50mm dia G.I. Pipe; surge arrestor; over voltage protection unit PTFE/ Rubber Liner material(as desired by the Engineer-in charge). The output showing volumetric flow rate and totalized flow with other details shall be on LCD display screen mounted on the flow meter body or in the near by control room with upto 25m length transmitter / sensor cabling and simultaneous transmission of reading through GSM Mobile signals to designated phone numbers and meter should have data storage of required capacity and shall be freely programmable for future upgradation and Scada compatible with power supply 80-300 V AC/DC etc. complete as directed by Engineer-inchar ge.;Mandatory A ccessories:;350

Additional / Optional Accessories :;Sensor / Transmitter cable;3 x 0.38 mm 2 PVC cable with common braided copper shield(7 mm dia) and individually shielded cores. With empty pipe detection 9 EPD 4 x 0.38 mm 2 PVC cable with common braided copper shield (7 mm dia) and individually shielded cores Conductor resistant

Additional / Optional Accessories :;Coil Cable;3 x 0.75 mm 2 PVC cable with common braided copper shield (7 mmdia) –Conductor resistance :< /=37 Ohm/km. –Capacitance : core / core shield grounded : </= 120 pF/m Permanent operating temperature : 20… +80 Deg.C

Additional / Optional Accessories :;Pressure Transmitter Cable;3 x 0.75 mm 2 PVC cable with common braided copper shield (7mm dia) –Conductor resistance :</37 Ohm/km. – Capacitance: core/core shield grounded: </=120 pF/m Permanent operating temperature : 20…+80 deg.C

Additional / Optional Accessories :;GI duct of 50 mm with suitable rating; For laying underground with all the necessary fitting joints etc for housing the cables between sensor and transmitter. The cable shall be installed in a suitable GI duct to minimize the risk of damage during excavation. All cable laid at a minimum depth.

Supplying cast iron fittings as per IS : 1538 -1993 including sealing rubber gasket (NR) CI Compression glands and coated MS Nuts bolts.; Flanged Socket Tail piece ( Flanged Adaptors);Nomi nal Dia in mm;350

Making joints to D.I/ C.I pipes with mechanical joints by nut bolts rubber rings that are provided with the jointsfor pushon tight joints and including the cost of rubber ring nut bolts for flanged joint including the cost of work force tools hydraulic testing of joints etc complete as per the direction of the engineer in-charge.;Fla nged Socket;350

Making flanged joints for C.I./D.I. Pipes and specials with rubber insertion nuts and bolts including necessary hydraulic testing etc. complete including cost of rubber insertion nuts and boltsas directed by the engineer in-charge.;Nominal diamter in mm.;350