8247 REPAIRS TO CERTAIN B/R WORKS LIKE JOINERY, SANITARY, FITTINGS, WALL TILING ETC AND OTHER MISC WORKS IN OTM ACCN AT AFMC UNDER GE (CENTRAL) PUNE

Amount

Demolition of un-refined cement concrete in ground floors and paving not exc 15cm thick (below or above ground level) and removing rubbish off the premises complete all as directed.

Demolition of cement concrete in Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work( un-reinforced) and removing rubbish off the premises complete all as directed.

Demolition of brick work or stone/ boulders masonry, built in cement mortar including all quoins, arches, pillars etc. but excluding ashlars facing, dressed stone work and precast concrete articles and removing rubbish off the premises complete all as directed.

Taking down cement plaster on brick/ block walling including raking out joints, hacking for key, scrubbing down with water etc complete and removing rubbish off the premises complete all as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing u/s tiles and rubbish off the premises and complete all as directed.

Demolition of stone slabs and tiles of any description of thickness in floors, aprons etc laid bedded and pointed in any mortar and removing rubbish off the premises complete all as directed.

Taking down angle iron/ wooden chowkats or frames with shutters (without taking off shutters from the frame) exc. 1.5 sq. m but n. exc.4sq m each and removing from site of work complete all as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) n. Exc. 1.5 Sqm each and removing from site of work complete all as directed.

Taking down shutters of any description exc 1 sqm but n.exc. 2 Sqm each and removing from site of work complete all as directed.

Taking down wooden shutter and refixing including resecuring or easing and adjusting in the same opening.nexc 1.00 sqm each all as directed.

Taking down wooden door shutter and refixing including resecuring or easing and adjusting in the same opening.exc 1.00 but nexc 2.00 sqm each all as directed.

Taking up or down carefully steel tubing and connections including cleaning for refixing or removal from site of work complete all as directed.

(a) 15mm dia

(b) 20mm dia

(c) 25mm or 32 mm dia

(d) 40 mm or 50 mm dia

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades,shelves , lintels, etc.and cutting chases for concealed water tubing and making good, cutting not exc 10 cm girth in brick walls complete all as directed.

Cutting holes in stone / brick / concrete block masonry walls built in cement mortar for inserting hold fasts measured from face of jambs into wall exc. one brick but n. exc.two bricks &making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 complete all as specified and directed.

M&L for PCC (1:2:4) type- B-0 (using 12.5mm graded aggregate) as on chajjas , in roof kerbs , rounded or chamfered on edges, including necessary form work complete all as specified and directed.

M&L for precast cement concrete block masonry exceeding 10cm in width with solid blocks of PCC (1:5:8) gde D-5 and setting in CM 1:6 complete all as specified and directed.

M&L for precast cement concrete solid block masonry n exc 10 cm width with solid blocks of PCC (1:5:8) grade D-4 and setting in CM 1:4 complete all as specified and directed.

S&F II nd class hard wood (haldu/ hallock) plain, solid, straight chowkats & frames , wrought, framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete all as specified and directed.

S & F plain fillets of 2nd class hard wood, square, rectangular or triangular in section, wrought secured with nails or brads, sectional area not exc 3 sqcm for glazing complete all as specified and directed.

S&F 30 mm thick Flush shutters, solid core construction, with particle board core and one face is covered with decorative face veneer with lipping/frame to match, with chowkat complete all as specified and directed.

S&F 30 mm thick Iind class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass guaze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass guaze etc, sizes of members of shutters as specified in SRR Part I section & Clause 8.24 (a) complete and directed.

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet, reinforced with M.S square tube, supplying & fixing in opening as per specifications, drawings complete.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting, of frame made out of M.S tubes for top & bottom rails M.S frame shall be covered with heat molded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles & plain co lour PVC sheets for top rail, lock rail& bottom rail on either side & gap insert for top rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stile & rails with suitable PVC sheet beading and jointed together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete.

S & F 100 mm long butt hinges medium weight , cold rolled Mild steel for door shutters complete all as specified and directed.

S&F 150 mm aluminium anodized barrel tower bolts of extruded section for door shutters complete all as specified and directed.

S & F 150 mm extruded aluminium alloy handles, fabricated type anodised complete all as specified and directed.

S & F floor door stopper of aluminium alloy and tongue, anodised with hard drawn steel overall length of cover plate 140mm complete all as specified and directed.

S & F 300 mm long aluminium alloy , anodised sliding door bolt with hasp , staple( bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast - aluminium alloy complete all as specified and directed.

S&F anodized aluminium alloy , 20mm dia hanger rod in cupboards with fixing brackets, stops, rollers etc complete all as specified and directed.

S & F in repairs hasp and stapple aluminium anodised safety type with MS hinges pin including bolt to hinge plate and fixed with screw 75 mm size, complete all as specified and directed.

S & F stainless steel wirecloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm & fixed with stainless steel wire stapples complete all as specified and directed.

S & F in repairs alluminium anodised barrel tower bolt of extruded section 150 mm long complete all as specified and directed.

S&F in repairs extruded alluminium alloy handles fabricated type anodised 150 mm complete all as specified and directed.

S & F in repairs mild steel ordinary rat tail rod pattern spring 300 mm size including roller & roller plate complete all as specified and directed.

S & F in repairs 300 mm long aluminium alloy , anodised sliding door bolt with hasp , staple( bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast - aluminium alloy complete all as specified and directed.

S & F mild steel ordinary rat tail rod pattern spring 300 mm size including roller & roller plate complete all as specified and directed.

S & F in repairs floor door stopper of aluminium alloy and tongue, anodised with hard drawn steel overall length of cover plate 140mm complete all as specified and directed.

S & F in repairs Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S & F mild steel framed work such as grills, framed guard bars etc and similar work confirming to Fe-290, grade E-165 complete all as specified and directed.

S&F mild steel flat iron as in hold fasts fitted to chowkats with nails or welded to angle iron frames complete all as specified and directed.

M & L Running welding in repairs thickness of metal for welding n exc 6 mm complete all as specified and directed.

S&F aluminium powder coated fancy type curtain rod 25mm bore complete all as specified and directed.

S & F aluminium powder coated brackets suitable for 25mm bore curtain rod (minimum projection from wall 75mm) fixed in wall including drilling, rawl plug, screws etc complete all as specified and directed.

S&F powder coated aluminum door frame with side hung shutter alongwith door lock, handles, 5mm thick froasted glass in top and 12mm thick prelaminated particle board (both side laminated) in bottom panel, fixed with rubber beading and glazing clips and using aluminium sections as given in 'JINDAL' Catalogue complete all as directed.

S&F powder coated anodised aluminium fixed partition , comprising of at least 63.50 x 38.10 x 1.85 mm aluminium section and including jointing cleats, aluminium snap beading 20x15mm, rubber gasket, glazing clips, 5mm thick froasted glass in top and 12mm thick prelaminated particle board (both side laminated) in bottom panel, fixed with rubber beading and glazing clips and all other fittings required to erect as per site requirement and all as directed.

S&F three track sliding window with two or more shutter witth 4 mm thick frosted glass , one shutter of stainless steel wire cloth 0.36 mm nominal dia & 1.18 mm width aperture for mosquito proofing with good quality bearing, handle lock, rubber beading and glazing clips etc using following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make complete all as specified directed by Engr-in-Charge. (a) Bottom frame 20620 (b) Top frame & Verrtical 20621 (c) Handle (side) 20606 (d) Shutter inter lock 20724 (e) Shutter top & Bottom 20844 (f) Glazing Clip 19352

S&F ventiltors/ louvers with parttially guaged shutter using 5 mm thick x 10 cm wide frosted glass strips and following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make and rubber beading etc all as directed. (a) SP 20048 (b) Glazing clips 19352

S&F double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

M&L for Gypsum ceiling board for ceiling prepainted, perforated finish, 600 x 600 x 9 to 9.5mm thick in size, of approved brand/make, laid over and including grid work of size 600 x 600mm, made out of 0.5mm thick G.I. tee 32 x 24 mm for main, 25x24mm for cross tee and 20 x 20mm angle fixed on wall, powder coated finish on exposed faces of tee and angle. hung from ceiling using 2 mm thick G.I. Suspension wires spaced at 1200 mm on main runners including making niches for fans/light after taking down old u/s ceiling board complete all as specified and directed.

M & L Providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw (as per manufacturers instructions) to Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long including two coats of oil bound distemper over primer on ceiling complete after taking down old u/s ceiling board complete all as specified and directed.

M & L for decorative POP cornices/moulding of pattern as approved by Engr-in-charge of cross section area exc 13 Sqcm and not exc 25 Sqcm including two coats of oil bound distemper over a coat of primer on ceiling complete all as specified and directed.

S&F 6mm thick Aluminium composite panels(ACP) flat or bent panel of any colour consist of two thin aluminium sheets bonded to a non aluminium core used for external cladding and false ceiling etc. including taking down existing ACP (any size any thickness ) , Complete all as specified and as per manufacturers instruction . Note : (a) Colour pattern and make as apporved by GE (b) Rate includes arrangement for necessary scaffolding as well as providing nylon security mesh for preventing any damages to existing bldg of any height . (c) Providing safety measures to workers is totally contractor's resposibility.

M&L Non skid ceramic colored tiles 7to8mm thick, (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floor etc.set and jointed in neat cement slurry & pointed in white or coloured cement to match.over and including 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified and directed.

M&L Non skid ceramic colored tiles 7to8mm thick, (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm as in skirting , set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick backing coat in CM 1:4 all as specified and as directed.

M & L ( light shade) Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 15 mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed.

M & L ( light shade) vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, as in skirting , set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick backing coat in CM 1:4 complete all as specified and directed.

M & L ( light shade) vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exc 0.42 sqm but not exceeding1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 15 mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed.

M & L ( light shade) Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exc 0.42 sqm but not exceeding 1.00 sqm, as in skirting , set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick backing coat in CM 1:4 all as specified and as directed.

M&L for coloured Ceramics tiles 450x300x7to8mm thick in vertical surfaces such as skirting dado set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 15mm thick rendering in cement mortar 1:4 on stone / brick/ concrete masonry surfaces all as specified and directed.

M & L for 600 x 300 x 6 to7 mm thick, coloured glazed vitrified tiles as in skirting/dado set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 15mm thick rendering in cement mortar 1:4 on stone / brick/ concrete masonry surfaces all as specified and directed

M & L for Machine cut kota stone slab flooring 20-25mm thick over and including 15 mm thick cement screed base in cm (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M & L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar set and jointed in neat cement slurry and pointed in white or coloured cement to match over including 15 mm thick backing coat in CM 1:4 all as specified and as directed by Engr-in-Charge.

M & L granite ( of any type ) work ( table rubbed and polished ) 18 to 20 mm thick in steps, jambs, pillars, window cill , cooking platform and flooring in CM 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite with and including screed bed or bedding layer 15 mm thick, in CM 1:6 complete all as specified and directed.

M & L fro chamfer, splays or arris in facework to granite exc 15 mm but n exc 50 mm wide all as directed.

M&L for machine cut cudappah stone slab 20mm to 25 thick, over and including 15 mm thick cement screed base in cm (1:6) laid and jointed in grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete all as specified and directed.

M&L for precast coloured, chequered cement concrete tiles, glossy finish of size 305 x 305mm x 25mm thick, conforming to IS-1237 (2006) set jointed and pointed in neat cement slurry in floor laid over and including 20mm thick screed bed in CM (1:6) complete all as specified and directed.

M&L for machine pressed precast concrete interlocking glossy finish paver block any shape and size confirming to IS15658-2006 of 60 mm thickness, M-35 grade chemically coloured over and including 25 mm thick sand cushioning complete all as specified and directed.

M&L for 75mm thick PCC (1:3:6) type C2 (using 20mm graded aggregate) as in plinth protection/hard standing, finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed.

M&L for 75mm thick PCC (1:4:8) type D2 (using 40mm graded aggregate) as in sub base/flooring/ paving etc complete all as specified and directed.

M&L for 25 mm thick PCC type B-0, 1:2:4 (12.5 mm graded aggregate) as in levelling course for floor tiling etc complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:6 over Stone /brick / concrete wall surfaces trowelled to even & smooth w/o using extra cement for internal wall surfaces complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:4 over Stone /brick / concrete wall surfaces mixed with liquid WPC as per manufacturer's instruction trowelled to even & smooth w/o using extra cement for external wall surfaces complete all as specified and directed. Note:- Liquid WPC shall be measured and paid separately.

M&L for 15mm thick rendering in CM 1:3 over Stone /brick / concrete surfaces of chajjas, extended facias, etc, trowelled to even & smooth with using extra cement including mixed with liquid water proofing compound as per manufacturere's instruction complete all specified and directed. Note:- Liquid WPC shall be measured and paid separately.

M&L for preparation of newly plastered surface of wall and applying three coats of white washing on walls all as spd and directed.

M&L for preparation newly plastered surfaces of wall and applying two coats of cement base paint complete all as specified

M & L for Preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over 2 mm thick wall care putty complete all as specified and directed.

M & L preparing surfaces of wood or wood based material, steel and iron work, new or old of any description or girth treating small articles such as stop covers, gully traps, grating , hold fasts treated with tar or coal tar black paint area n exc 0.1 Sqm each all as specified and directed.

M & L for preparing surfaces of wood or wood based material new or old if any description or girth treating end of post, back of chowkats etc with tar or coal tar black paint complete all as specified and directed.

M & L for preparation of new or priviously untreated surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer to newly wood surfaces complete all as specified and directed.

M & L for two coats of synthetic enamel paint over one coat of red oxide or zinc chrome primer over surfaces of steel or iron of any description exc 10 cm width or girth including preperation of new or previously untreated steel surfaces all as specified and directed.

Taking out old broken glass (any thickness size, quality or description ) from wooden/ metal frames and M & L for sheet glass 3mm thick ordinary quality and glazing & securing with oil putty or fixed with beads with using pins, each pane n. exc 0.5 Sqm in area complete all as specified and directed.

Taking out old broken glass (any thickness size, quality or description ) from wooden/ metal frames and M & L for frosted glass 3mm thick ordinary quality and glazing & securing with oil putty or fixed with beads with using pins, each pane n. exc 0.5 Sqm in area complete all as specified and directed.

Taking out old broken glass (any thickness size, quality or description ) from aluminium frames and M & L for figured glass, pin head type 4 mm thick ordinary quality , securing and fixed with and including necessary powder coated aluminium beading , each pane exc 0.5 Sqm in area complete all as specified and directed.

S & F GI tubing medium grade with all fittings fixed to wall or laid in floors complete all as specified and directed.

(a) 15mm dia bore

(b) 20mm dia bore

(c) 25mm dia bore

(d) 32 mm dia bore

(e) 40 mm dia bore

(f) 50 mm dia bore

Refixing old steel tubing and connections in new or old postion (wall/floor/ceilings etc) of following size complete all as directed.

(a) 15mm bore

(b) 20mm bore

S & F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

All as per item No 86 here-in-before but 75 mm bore.

S & F 110 mm bore PVC (SWR) bends any radius complete all as specified & directed.

All as per item No 88 here-in-before but 75 mm bore.

S & F 110 mm bore PVC (SWR) bends any radius provided with access door complete all as specified & directed.

All as per item No 90 here-in-before but 75 mm bore.

S & F 110 mm bore PVC (SWR) vent cowl complete all as directed.

All as per item No 92 here-in-before but 75 mm bore.

S&F 500 litres capacity rotational moulded polythylene water storage tanks of tripple layers (cylindrical vertical with colsed top) hoisted and fixed in postion all as spd and directed.

All as per item No 94 here-in-before but 1000 litres capacity.

All as per item No 94 here-in-before but 2000 litres capacity.

M & L for Cleaning of PVC water tank of capacity exc 250 but n.exc 500 ltr and removing all scale and dirt with using bleaching powder , etc, from tanks and from mouths of circulating pipes, etc. including disconnecting existing tanks, and hoisting if required reconnecting and re-fixing in position complete. Note :- Date of cleaning should be writing in synthetic enamel paint of 10cm height using Tensile in format of - "CLEANED ON : DD/MM/YYYY"

All as per item No 97 here-in-before but capacity exc 500 but n.exc 1000 ltr

All as per item No 97 here-in-before but capacity exc 1000 but n.exc 2000 ltr

M & L for Cleaning of RCC water tank of capacity exc 1000 litres but n exc 2000 litres including removing all scale and dirt with using bleaching powder, etc, from tanks and from mouths of circulating pipes, etc. complete. Note :- Date of cleaning should be writing in synthetic enamel paint of 10cm height using Tensile in format of - "CLEANED ON : DD/MM/YYYY"

S & F in repairs 20 mm bore ball valves high pressure of PTMT with epoxy coated, aluminium rod & high density plastic ball complete screwed for iron pipe or brass ferrule all as specified and directed.

S&F in repairs 20mm bore gun metal globe or gate valves with iron wheel head, screwed both ends for iron pipe of ISI marked complete all as specified and directed.

All as per item No 102 here-in-before but 25 mm bore.

S & F in repairs vitreous china squatting Pan " Orissa " pattern of size 580 mm X 440 mm white with integral foot rests ( excluding flushing cistern and flush pipe) including provn of cement concrete bedding and connection to trap, and to flushing pipe, anti-syphonage pipe,etc. complete including making good to floor complete all as specified and directed. .

S & F in repairs vitreous china wash down water closet pan ( pedesal pattern ), white including connection to drain ( or outgoing pipe ) and to flushing pipe with and including Plastic water closet seat,closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F in repairs vitreous china ceramic white Single peice WC (S or P trap) with UF soft close seat cover, hinges, accessories set, size 365 x 655 x 765 mm , Product Code: LYS-WHT-38851SSM of Jaquar or equivalent model of approved make, complete all as specified and directed.

S & F in repairs stainless steel kitchen sink without drainage board of 1 mm thick with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S & F in repairs wash hand basins, vitreous china of size 550mm X 400mm ( flat back or angle back type) including cutting for and pinning in ends of brackets or erecting stand inclusive supply of 32 mm bore waste fittings brass chromium plated with long screwed shanks and fly nuts,screwed for iron pipe and fixing waste pipe etc. complete all as specified and directed.

S&F in repair oval shaped vitreous china WHB table top Coyal snow white, fancy type of 460mm dia, cat No S2020105 of cera or of equivalent model of approved make including 32 mm CP waste coupling, PVC waste pipe etc complete all as specified and directed.

S&F in repair oval shaped vitreous china , under/over counter WHB, snow white, fancy type of overall size 560 x 470 mm,as per cat No S2030104 of cera or of equivalent model of approved make including 32 mm CP waste coupling, PVC waste pipe etc complete all as specified and directed.

S & F in repairs plastic water closet seat, white closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinges complete all as specified and directed.

S & F in repairs 125 mm dia brass chromium plated shower rose including shower arm of approved quality complete all as specified and directed.

S & F chromium plated soap dish fixed to plugs with chromium plated brass screws complete all as specified and directed.

S & F in repairs CP health faucet including 1200mm long flexible chord complete all as specified and directed.

S&F PVC box type cabinet of approx size 35 x 40 x 12 cm with 3mm thick mirror mounted on shutter, with PVC shelves 2mm thick and outer frame having 4mm thickness fixed in existing opening with wooden plugd including taking down existing one complete all as specified and directed.

S & F in repairs CP toilet paper holder complete all as specified and directed.

S & F Transparent Glass 7.5 x 7.5 inch for corner bathroom shelves with bracket (set of 2) complete all as specified and directed.

S & F in repairs brass chromium plated Tubular towel rail 20mm dia "D" type 60cm long complete all as specified and directed.

S & F stainless steel gratings 100 mm dia with hole for waste pipe complete all as specified and directed.

S & F in repairs 15 mm bore bib taps,fancy type cast copper alloy chromium plated with crutch or butterfly handle, screwed down and screwed for iron pipe or for brass ferrule complete all as specified and directed.

S & F in repairs 15 mm bore chromium plated 2 way bib cock fancy type with wall flange complete all as specified and directed.

S & F in repairs 15 mm bore stop valves, fancy type cast copper alloy chromium plated with crutch or butterfly handle, screwed down and screwed both ends for iron pipe or for union complete all as specified and directed.

All as per item no 124 here-in-before but concealed type long shank.

S & F in repairs 15 mm bore pillar taps,fancy type swan neck spout (Left) and aerato, as per cat No. F2002104 of cera or equivalent model of approved make all as specified and directed.

S & F in repairs fancy type sensor pillar tap CP 15 mm bore with control box set with long shank for table top wash hand basin of approved make complete all as specified and directed.

S & F 15 mm bore pillar taps,fancy type cast copper alloy with capstan heads, chromium plated , screwed down high pressure with long screwed shanks and fly nuts, complete all as specified and directed.

All as per item No 128 here-in-before but fixed in repairs.

S & F in repairs 15 mm chromium plated wall mixer (2-in-1) with arrangement for overhead shower confirming to CAT No. F2002401 of " Cera" or equivalent model of approved make all as specified and directed.

S & F in repairs 15 mm bore, 600 mm long PVC connections with PTMT nuts complete fixed to iron pipe at both ends complete all as specified and directed.

S & F in repairs 10 ltr capacity PVC valveless, syphonic action type, flushing cistern, low level, white, including flush pipe 32 mm dia complete all as specified and directed.

S & F in repairs flush pipe of polyethylene of low or high density or PVC , 32 mm dia for low level flushing cistern/ basins complete complete all as specified and directed.

Supply only liquid in water proofing compound.

Suma Construction

Parhar Enterprise

Mourya Enterprises

R K CONSTRUCTION AND ENGINEERING