Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3.1 LAccepted-Finance | L1 | Accepted-Finance eligible |
Tender Value
₹2.8 L
EMD Value
₹5,570
Closing Date
7 Dec 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer Civil
Office of Executive Engineer Civil BSNL Civil Division 3rd Floor Telephone Bhavan Tarabai Park Kolhapur
Renovation and Miscellaneous repairs of Ty IV staff quarter for making arrangement of rest rooms at Sawantwadi TE compound Dist Sindhudurg
2023_BSNL_175788_1
65EECKBSNL202324
Open Tender
Civil Works
Item Rate
30 days
Oros
Please refer Tender documents.
4 documents required · 4 mandatory
₹590
BSNL Kolhapur
₹5,570
12 Dec 2023
25 Nov 2023
12 Dec 2023
25 Nov 2023
7 Dec 2023
25 Nov 2023
Amount
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
a)1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
Extra for concrete work in superstructure above floor V level for each four floors or part thereof.
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).
Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.
a) Thermo-Mechanically Treated bars of grade Fe-500D or more
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :
a) Cement mortar 1:6 (1 cement : 6 coarse sand
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level
a) Cement mortar 1:4 (1 cement :4 coarse sand)
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete
Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets
a) 25 mm dia (heavy type)
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete.
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.
a) 75 mm diameter
b) 110 mm diameter
12 mm cement plaster of mix 1:6 (1 cement: 6 coarse sand)
15 mm cement plaster on rough side of single or half brick wall of mix a) 1:6 (1 cement: 6 coarse sand)
Satna lime wash on walls with one coat.
Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade a) New work (two or more coats) over and including water tinnable priming coat with cement primer
Distempering with 1st quality acrylic distember (Ready mix) having VOC content less than 50 grams/ litre of approved brand and manufacture to give an even shade :
a) Old work (one or more coats)
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface Water thinnable cement primer
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :
a) Two or more coats on new work
Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead
a) Of area 3 sq. metres and below
Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar
Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. a) For thickness of tiles 10 mm to 25 m
Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead.
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required
a) W.C. pan with ISI marked white solid plastic seat and lid
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require
a) White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap
Providing and fixing PTMT Bottle Trap for Wash basin and sink
a) Bottle trap 31mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 260 gms
Providing and fixing PVC low level flushing cistern with manually controlled device ( handle lever ) conforming to IS 7231 Parryware/Hindware /Seabird/Orient (coral ) with all fittings and fixtures complete
a) 10 litre capacity - white
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing
a) Rectangular shape 453x357 mm
b) Rectangular shape 1500x450 mm
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.
600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms.
Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms.
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall
a) 20 mm nominal outer dia Pipes
b) 25 mm nominal outer dia Pipes
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. a) 20 mm nominal outer dia Pipes
b) 25 mm nominal outer dia Pipes
Providing and fixing PTMT stop cock of approved quality and colour
a) 15 mm nominal bore, 86 mm long, weighing not less than 88 gms
Providing and fixing PTMT grating of approved quality and colour
Circular type
a) 100 mm nominal dia
Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour.
a) 45 cm length
i) 15 mm nominal bore
Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of: (i) Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface. (ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. (iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of area. (iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqm).
Providing and fixing on wall face available unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion,
a) 110 mm diametre
Providing and fixing UPVC SWR-pipes ( 4 Kgf/sq.cm) including jointing with seal ring conforming to IS: 5382 etc. complete a) Single socketed i) 110 mm dia
ii) 75 mm dia
Providing and fixing UPVC SWR moulded fittings / accessories for UPVC SWR pipes including jointing with seal ring confirming to IS: 5382 a) Tee with access door
i) 110 mm dia
ii) 75 mm dia
b) Y with access door 110mm dia
c) Bend
i) 110mm dia
ii) bend 75mm dia
c) Bend with access door
i) 110mm dia
ii) bend 75mm dia
d) Cowl
i) 110 mm dia
ii) 75 mm dia
e) Reducer 100 to 75 mm
Providing and fixing UPVC SWR trap of self cleansing design with screwed down or hinged grating .
a) 75 mm size.
Providing and fixing CP brass bib cock of approved quality 15mm nominal bore - Jaquar FLR-CHR 303037 or equivalent
Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet EOS CHR 542A with Shower arm ALE CHR 536A or equivalent
a) 100 mm diameter
Providing and fixing concealed CP brass stop cock of approved quality 15mm nominal bore - Jaquar SQT CHR 514AKN or equivalent
Providing and fixing CP brass two way bib cock of approved quality 15mm nominal bore - Jaquar COS-CHR 103041 or equivalent
Providing and fixing health faucet ( Hand spray) of approved quality 15mm nominal bore - Jaquar ALE CHR 583 or equivalent
Providing and fixing Granite sill and jambs for existing windows in cement mortar 1:4 (1 cement : 4 coarse sand) and finishing joints with cement and matching pigment. Width of Granite strip is not less than 15cm etc. all complete and as directed by engineer in Charge. ( Granite colour Black or approved by engineer in Charge)
Extra for moulding of edges upto the polish finish and as directed by engineer in charge. Marble or Granite - Half round finish
Supplying PVC buckets of minimum 15 litres capacity of approved company, model and approved colour and as per the direction of Engineer in Charge
Supplying PVC mugs of approved company, model and approved colour and as per the direction of Engineer in Charge
Providing and fixing readymade available curtains of approved quality cloth and in approved pattern of 1.2m height including fixing with plastic rings and as per direction of Engineer in charge.
stage.html
html • 0.03 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .