GE (N) P/TOKEN- 64 OF 2021-2022REP/REPLAC OF INTERNAL ELECTRIFICATION, FITTINGS AND FIXTURES INCLUDING SUBMAIN WIRING AND DBS IN MD ACCN AND OTM OF GHORPADI AREA(GHORPADI,VISHWAMITRA MARG,VICTORIA ROAD, SUB AREA ETC ) OF AGE E/M (N) UNDER GE (N) PUNE

Amount

Taking down carefully aluminium point wiring (light, fan, socket or power), complete (fitting such as switches,ceiling rose, pendent, regulators etc) removing material to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately and making dood disturbed surfaces of wall, floor etc. complete all as specified and as directed.

Taking down the existing unserviceable main switch / cut out / DBs of any type / capacity / description as existing at site including MCBs any type and capacity making good the disturbed surfaces to match with the existing finishes all as specified.

Taking down the existing unservicable sub main wiring of any type / description as existing at site including making good the disturbed surfaces to match with the existing finishes all as specified.

M & L for Point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sq. mm (nominal area), three single core, PVC insulated and unsheathed FRLS cable 1100 volts grade ISI-694 marked drawn through in and including heavy duty, PVC concealed conduit including all accessories after chasing in wall/ceiling etc, heavy duty ISI marked, with GI sunken boxes 1.2 mm thick, 60 mm deep with earth dolly duly, covered with modular white cover plate with frame suitable for modular switches, including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly all as specified and directed for the following :-

(a) One light point controlled by one, one way switch 5 Amps

(b) One fan point/ exhaust fan point controlled by one, one way switch 5 Amps and regulator

(c) One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent boad.

(d) One bell point controlled by one, bell switch 5 Amps

(e) One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board.

- Ditto- all as per item No 4 above but with multistranded copper conductor 2.5 Sqmm (nominal area), single core, PVC insulated and unsheathed multistranded cable 1100 Volt grade ISI-694 marked including PVC insulated multistranded copper conductor 2.5 Sqmm (nominal area) single core as earth continuity conductor to common earth and connecting to earth dolly.

M & L for Point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sq. mm (nominal area), two single core, PVC insulated and unsheathed FRLS cable 1100 volts grade, ISI-694 marked drawn through in and including heavy duty, PVC casing caping including all accessories etc, heavy duty ISI marked, with GI sunken /surface boxes 1.2 mm thick, 60 mm deep with earth dolly duly as per site requirment , covered with modular white cover plate with frame suitable for modular switches, or PVC surface mounted modular box, including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed for the following :-

(a) One light point controlled by one, one way switch 5 Amps

(b) One fan point/ exhaust fan point controlled by one, one way switch 5 Amps and regulator

(c) One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent boad.

(d) One bell point controlled by one, bell switch 5 Amps

(e) One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board.

'- Ditto- all as per Item No. 7 above but with multistranded copper conductor 2.5 Sq. mm (nominal area), single core, PVC insulated and unsheathed multistranded FRLS cable 1100 Volt grade ISI-694 marked for 3 pin, 15 Amp socket outlet, independent, including PVC insulated multistranded copper conductor 2.5 Sqmm (nominal area) single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly.

M & L for replacement hylem sheet 3 mm thick colour applicable as per site requirement including refixing of serviceable piano switch, socket etc using screws with brass washers or cup washers all as diected and specified by Engineer-in- charge.

S & F for Modular Switch piano flush type, single pole, one way, and 6 Amp complete all as specified.

S & F for Modular Switch piano flush type, single pole, one way, and 15 Amp complete all as specified.

S & F for Modular Socket outlet multipurpose having provision for 3 pin, 5 Amp and 2 pin, 5 Amp, piano flush type complete all as specified.

S & F for Modular Switch Socket outlet multipurpose having provision for 3 pin, 15 Amp and 3 pin, 5 Amp, piano flush type complete all as specified.

S & F for modular step type fan regulator 120 watts single module suitable for operation on 230 volt 50 HZ AC supply complete all as specified and as directed

S & F for modular step type fan regulator 120 watt 2 module suitable for 230 volt 50 Hz AC supply complete all as specified and as directed.

S & F for for Bell push modular 6 Amps complete all as specified.

Suply and fix for Bell Electric Ding dong type suitable for operation on 230 volt 50 HZ A C supply complete all as specified and as directed

S & F for for Lamp holder, PVC body of brass suitable for batten fitting completes all as specified.

S & F for Ceiling rose, surface Bakelite suitable ISI marked for batten fitting complete all as specified

S & F for Switch piano flush type, single pole, one way, and 6 Amp complete all as specified.

S & F for Switch piano flush type, single pole, one way, and 15 Amp complete all as specified.

S & F for Switch socket combination, 2 in 1, 3 pin 5 and 15 amp flush type universal as directed.

S & F for Socket outlet multipurpose having provision for 3 pin, 6 Amp and 2 pin, 6 Amp, piano flush type complete all as specified.

S & F for Socket outlet multipurpose having provision for 3 pin, 15 Amp and 3 pin, 5 Amp, piano flush type complete all as specified.

S & F for Socket outlet multipurpose having provision of Switch socket combination 2 in 1, 3 pin, 5 and 15 Amp flush type universal complete all as specified

S & F for Bell push 6 amp 230 volt 50 HZ AC supply complete all as specified and as directed

S & F ceiling fan regulator socketed, step type, flush type heavy duty, 120 watts suitable to work on 230 volts Ac supply complete all as specified.

Material and labour for attending emergent complaints i.e no light, earth leakage, short circuit, neutral break mains/ sub mains/ internal circuits of existing system of main building/ block, making continious electric supply including carrying out minor repairs etc as required to make the system in order/ functional including replacing fuse wire, copper cable, copper thimbles, glands, earthing wire complete all as specified and as directed. Note :- Rate of fuse wire, copper cable, copper thimbles, glands, earthing wire are deemed to be considered in this item.

M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLS cable with multistranded copper conductor of size 4.0 Sq mm nominal area and drawn through PVC non metallic rigid PVC casing caping and its accessories including one run of PVC insulated 4.0 Sq mm (nominal area) multistranded copper conductor FRLS cable as earth wire and connected from DB to DB/ main board complete all as specified and as directed.

Note:- Two runs of 4 sqmm cable,one run of 4.0 sqmm cable and one run of PVC casing caping and accessories will be measured as one unit

M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLS cable with multistranded copper conductor of size 4.0 Sq mm nominal area and drawn through concealed PVC non metallic rigid PVC conduit and its accessories including one run of PVC insulated 4.0 Sq mm (nominal area) multistranded copper conductor FRLS cable as earth wire and connected from DB to DB/ main board complete all as specified and as directed.

Note:- Two runs of 4 sqmm cable,one run of 4.0 sqmm cable and one run of PVC concealed conduit and accessories will be measured as one unit

M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLS cable with multistranded copper conductor of size 6.0 Sq. mm nominal area and drawn through PVC non metallic rigid PVC casing caping and its accessories including one run of PVC insulated with 6.0 Sqmm (nominal area) multistranded copper conductor FRLS cable as earth wire and connected from DB to DB/ main board complete all as specified and as directed.

Note:- Two runs of 6 sqmm cable,one run of 6.0 sqmm cable and one run of PVC casing caping and accessories will be measured as one unit

M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLS cable with multistranded copper conductor of size 6.0 Sq. mm nominal area and drawn through PVC non metallic rigid concealed conduit and its accessories including one run of PVC insulated with 6.0 Sqmm (nominal area) multistranded copper conductor FRLS cable as earth wire and connected from DB to DB/ main board complete all as specified and as directed.

Note:- Two runs of 6 sqmm cable,one run of 6.0 sqmm cable and one run of PVC concealed conduit and accessories will be measured as one unit

M & L for Sub main wiring with approved colour coding as per IS with four single core PVC insulated FRLS cable with multistranded copper conductor of size 6 Sq. mm nominal area and drawing into PVC non metallic rigid heavy duty PVC non metallic rigid PVC casing caping and its accessaries ISI marked heavt duty of suitable size including with two runs of PVC insulated 6 Sqmm (nominal area) multistranded copper conductor FRLS cable as earth wire and connected from DB to DB/ main boardcomplete all as specified and as directed.

Note:- four runs of 6 sqmm cable, two runs of 6 sqmm cable and one run of PVC heavy duty non metallic rigid PVC casing caping will be measured as one unit.

M & L for Sub main wiring with approved colour coding as per IS with four single core PVC insulated FRLS cable with multistranded copper conductor of size 6 Sq. mm nominal area and drawing into PVC non metallic rigid heavy duty PVC conduit and its accessaries ISI marked heavt duty of suitable size including with two runs of PVC insulated 6 Sqmm (nominal area) multistranded copper conductor FRLS cable as earth wire and connected from DB to DB/ main boardcomplete all as specified and as directed.

Note:- four runs of 6 sqmm cable, two runs of 6 sqmm cable and one run of PVC heavy duty conduit will be measured as one unit.

M & L for Sub main wiring with approved colour coding as per IS with four single core PVC insulated FRLS cable with multistranded copper conductor of size 10 Sq. mm nominal area and drawing into PVC non metallic rigid heavy duty PVC conduit and its accessaries ISI marked heavt duty of suitable size including with two runs of PVC insulated 10.0 Sqmm (nominal area) multistranded copper conductor FRLS cable as earth wire and connected from DB to DB/ main boardcomplete all as specified and as directed.

Note:- four runs of 10 sqmm cable, two runs of 10 sqmm cable and one run of PVC heavy duty conduit will be measured as one unit.

S & F for metal flush box made of GI sheet 1.2 mm thick, 60 mm deep with each terminal including necessary cutting in wall and POP work as required for matching existing slot in wall of size 4 module including removal of old unserviceable one complete all as specified and as directed.

S & F for metal flush box made of GI sheet 1.2 mm thick, 60 mm deep with each terminal including necessary cutting in wall and POP work as required for matching existing slot in wall of size 6 module including removal of old unserviceable one complete all as specified and as directed.

S & F for metal flush box made of GI sheet 1.2 mm thick, 60 mm deep with each terminal including necessary cutting in wall and POP work as required for matching existing slot in wall of size 8 module including removal of old unserviceable one complete all as specified and as directed.

S & F for metal flush box made of GI sheet 1.2 mm thick, 60 mm deep with each terminal including necessary cutting in wall and POP work as required for matching existing slot in wall of size 12 module including removal of old unserviceable one complete all as specified and as directed.

S & F for PVC surface modular box with modular plates inner and outer with each terminal including necessary fixing arrandements of size 1 or 2 module including removal of old unserviceable one complete all as specified and as directed.

S & F for PVC surface modular box with modular plates inner and outer with complete set terminal including necessary fixing arrandements of size 4 module including removal of old unserviceable one complete all as specified and as directed.

S & F for PVC surface modular box with modular plates inner and outer with complete set terminal including necessary fixing arrandements of size 6 module including removal of old unserviceable one complete all as specified and as directed.

S & F for PVC surface modular box with modular plates inner and outer with complete set each terminal including necessary fixing arrandements of size 8 module including removal of old unserviceable one complete all as specified and as directed.

S & F for PVC surface modular box with modular plates inner and outer with complete set each terminal including necessary fixing arrandements of size 12 module including removal of old unserviceable one complete all as specified and as directed.

S & F for modular plates white colour with frame of 1 module including removal of old unserviceable one complete complete all as specified and as directed

S & F for modular plates white colour with frame of 2 module including removal of old unserviceable one complete complete all as specified and as directed

S & F for modular plates white colour with frame of 3 module including removal of old unserviceable one complete complete all as specified and as directed

S & F for modular plates white colour with frame of 4 module including removal of old unserviceable one complete complete all as specified and as directed

S & F for modular plates white colour with frame of 6 module including removal of old unserviceable one complete complete all as specified and as directed

S & F for modular plates white colour with frame of 8 module including removal of old unserviceable one complete complete all as specified and as directed

S & F for modular plates white colour with frame of 12 module including removal of old unserviceable one complete complete all as specified and as directed

S & F for MCB DB VTPN 4 way with provision for FP MCB/Isolator/RCCB etc as incommer and SP/TP MCBs as out going double door IP 43 complete prewired including Bus Bar, for space for MCCB incoming etc suitable for operation on 415 volt 50 Hz AC supply including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed . Make - Schindier/Legrand/L&T/ ABB

S & F for sheet metal enclosure MCB DB TPN 4 way with 200 Amps rated bus bar 415 volts suitable for fixing double door with magnetic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed. Make -Legrand/L&T/ ABB

S & F for sheet metal enclosure MCB DB SPN 8 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed. Make - Schindier/Legrand/L&T/ ABB

S & F for sheet metal enclosure MCB DB SPN 6 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed. Make - Schindier/ Legrand/ L&T/ ABB

S & F for sheet metal enclosure MCB DB SPN 4 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed. Make - Schindier/Legrand/L&T/ABB

S & F for casing and capping size 40 mm including removal of old unserviceable one complete complete all as specified and as directed

S & F for casing and capping size 25 mm including removal of old unserviceable one complete complete all as specified and as directed

S & F for casing and capping size 20 mm including removal of old unserviceable one complete complete all as specified and as directed

Supply and replace for single core cable PVC insulated and unsheathed multistranded copper conductor of size 1.5 Sqmm from point wiring including removal old existing unserviceable one complete all as specified and directed.

Supply and replace for single core cable PVC insulated and unsheathed multistranded copper conductor of size 2.5 Sqmm from point wiring including removal old existing unserviceable one complete all as specified and directed.

Supply and replace for single core cable PVC insulated and unsheathed multistranded copper conductor of size 4 Sqmm from point wiring including removal old existing unserviceable one complete all as specified and directed.

Supply and replace for single core cable PVC insulated and unsheathed multistranded copper conductor of size 6 Sqmm from sub main wiring including removal old existing unserviceable one complete all as specified and directed.

S & F for wall/ceiling mounted LED batten tube 20 watts light fitting, 230 volts with out put of 2000 lumens with extruded aluminium housing with decorative end caps and intregrated electronic driver connector block etc complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including LED tube 4' x 20 watts complete all as specified and as directed. Make :- JAQUAR Cat part No LGLZ01X020XN or its equvalent in Philips, Wipro, Havells, Bajaj.

S & F in repair for wall mounted 20 watts indoor Inverter batten with opal diffuser, IP 20, with 4 hrs back up with out put of 1800 lumens , box type (decorative) light fitting, 230 volts with extruded aluminium heat sink provided for efficient heat dissipation and intregrated electronic driver connector block etc complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including LED tube 4' x 18 watts complete all as specified and as directed. Make :- Halonix Cat part No. LED INVERTER BATTEN HLB-08-20-CW-INV or equivalent Philips, Havells

Supply and fix in repairs linear batten type T8 Led rodin existing batten housings having one side only electrical connection with aluminium housing and polycarbonate diffuser operating voltage 230 volts 20watt cold day light

S & F for LED down light recess-mounted designer panel with aluminium die cast housing luminare, round type 18 watts with efficiency of 100 lumens per watt, Series of downlighters with low depth round & larger dia, powder coated white finish with drop down PC diffuser to deliver low glare illumination with optimized heat sink for efficient heat dissipation and separate replaceable electronic driver suitable for office spaces sleek design white finish operating voltage 150 V-270 V AC, 50 Hz all as specified. Make- JAQUAR Cat Part No LNRO01R018XN or Bajaj, Philips, Wipro, Havells.

S & F for recess mounted 2' x 2' square LED panel 36 watts, white powder-coated CRCA housing with full mounted acrylic diffuser (operating voltage 140 volts - 270 volts, AC, 50 Hz complete all as specified and as directed. Make- JAQUAR Ultima Ultra Cat Part No LULTU1S036XC or its equivalent in Wipro/ Philips/Bajaj.

S & F for decorative wall mounted luminaire made out of polycarbonate with unbreakable globe suitable for LED bulb and provision of LED bulb 10/11 watts with lumens out put not less than 1100 lumens all as per cat part No. LHDL06160099 of make Havells or equivalent of make Bajaj/Philipls complete all as specified and as directed. Note:- Rate of LED bulb 10/11 watts deemed to be included in the rate quoted by the contractor.

S & F for wall/ceiling mounted LED batten tube 10 watts, light fitting, with out put of 1000 lumens, 230 volts with extruded aluminium housing with decorative end caps and intregrated electronic driver connector block etc complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including LED tube 2' x 10 watts complete all as specified and as directed. Make :- JAQUAR Cat part No LGLZ01X010XN or its equvalent in Philips, Wipro, Havells, Bajaj.

S & F Energy saving new generation 10 watts LED bulk head fitting IP 65 comprising of pressure die cast aluminium housing with acrylic diffuser (IP65 protection) luminaire pre wired and necessary mounting arrangements , provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including LED bulb complete all as specified and as directed. Make :- JAQUAR Cat No LBLK02X010XW or its equvalent in Philips, Wipro, Havells, Bajaj

S & F for Energy saving new generation environmental friendly long life versatile aluminium pressure die cast housing, polycarbonate cover (IP 66 rating) for security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 25 watts with pre wired and necessary mounting arrangements and provision of 2.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe medium grade bracket 0.6 to 0.9 mtr long bend to required shape with clamps, nut, bolts complete all as directed by Engineer- in-charge. Make :- JAQUAR Cat part No LTRUMP0025XW or its equvalent in Philips, Wipro, Havells, Bajaj

S & F for Energy saving new generation environmental friendly long life versatile 30W energy efficient LED Inverter RTC Street light in Pressure die cast aluminium housing, top maintainable, with clear PC, higher efficiency secondary moulded lens with inbuilt Lithium Ion 3.7V battery pack for power back upto 2 hours,System lumens > 110 lumens/watt, 5700K CCT, IP66 / IK05 rating , having Thd<10%, PF >0.95. Luminaire should be complete with Isolated electronic constant current driver with >85% efficiency, RTC enabled for automatic switch ON/OFF of light futting suitable for operating in voltage range 140V to 270V & operating temperature range -10Deg to 50Deg C. Driver capable of Open & Short circuit protection, reverse polarity protection, high voltage cut off at 300+10V & 5Kv inbuilt internal surge protection device and necessary mounting arrangements and provision of 2.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe medium grade bracket 0.6 to 0.9 mtr long bend to required shape with clamps, nut, bolts complete all as directed by Engineer- in-charge. Make :- Halonix Cat part No. LED INVERTER LED SL 30W HLSLD-ML04-30-CWL-INV-RTC-R or equivalent Philips, Havells

S & F for LED spot light suitable for operation on 230 volt 50 Hz AC supply, Recess-mounted, die cast aluminium housing, COB-based, round fixed LED downlight with 60⁰ beam angle 10 watts including removal of old unserviceable one complete all as specified and as directed. Make JAQUAR Cat Part No LETS01R010XN or equivalent in Bajaj/Havells

S & F in repairs bed side wall mounted LED light fittingswith adjustable neck having energy consumption of 2 Watt at 230 V 50 Hz.Make Philips Cat no.8718291765400

S & F in repairs PU globes for gate lights, garden lights of following dia and colour all as specified and as directed

S & F in repairs PVC base with ceramic holder for globes for gate lights, garden lights of following dia and colour all as specified and as directed

Supply and fix in repairs LED driver in existing fittings having following wattage:

Supply and fix for MCCB TPN 415 volts 18 KA suitable for fixing on DB of capacity 63 to 100 Amps with extended terminals complete all as specified and as directed.

S & F for MCB tripple pole and neutral rated capacity 63 Amps, 415 volts breaking capacity 10 KA 'C' Series complete all as specified and as directed. Make - Schindier/Legrand/L&T/ ABB

S & F for MCB tripple pole and neutral rated capacity 32 Amps, 415 volts breaking capacity 10 KA 'C' series complete all as specified and as directed. Make - Schindier/Legrand/L&T/ ABB

S & F for MCB Single pole and neutral rated capacity 5 to 32 A, 240 volts breaking capacity 10 KA 'C' series complete all as specified and as directed. Make - Schindier/Legrand/L&T/ ABB

S & F for MCB Single pole rated capacity 5 to 32 A, 240 volts breaking capacity 10 KA 'C' series complete all as specified and as directed. Make - Schindier/Legrand/L&T/ ABB

Supply and fix for sheet metal enclosures single pole and neutral enclosure with a three pin and earth plug and socket complete with one MCB SP 20/ 32Amps including removal of old unserviceable one complete all as specified and as directed.

M&L for Servicing / testing of LT indoor Distribution Panels / feeder pillar boxes ,03 Phase , 430 Volts all as specified and as directed includng the following :-

(I) Repair/ replacement of damaged hinges and locks/latches of each compartment

(ii) Cleaning of existing bus bars with CTC applying with red solution, providing bus bar insulation and re fixing with new nuts, bolts, washers etc.,

(iii) Replacement of damaged copper flexible cable and fixing new copper flexible cable for incoming and outgoing connections of each MCCB/switches terminals to bus bars

(iv) Replacement of damaged/ worn out cable lugs any made / size for incoming & outgoing cables

(v) Replacement of neoprene gasket and transparent acrylic sheet 3 mm for all doors of panel board.

(vi) Repainting of LT panels after descaling the rusting , cleaning and drying the surfaces complete

(vii) Running welding whereever required

(vii) Replacement of LED indicators showing phases R, Y ,B

S & F for plastic body exhaust fan, AC single phase, 240 V of size 150 mm sweep with louvers (as per Cat Part No -Maxio 6" Ivory new of Make- Bajaj or equivalent Make- of crompton/Havells) including necessary connection and replacement of flexible copper cable from ceiling rose and taking down of old unserviceable fan and depositing in the store yard of AGE E/M (N) Pune complete all as specified and as directed

S & F for plastic body exhaust fan, AC single phase, 240 V of size 200 mm sweep with louvers (as per Cat Part No -Maxma DX 8" of Make- Bajaj or equivalent Make- of crompton/Havells)including necessary connection and replacement of flexible copper cable from ceiling rose and taking down of old unserviceable fan complete and depositing in the store yard of AGE E/M (N) Pune all as specified and as directed

S & F for plastic body exhaust fan, AC single phase, 240 V of size 250 mm sweep with louvers (as per Cat Part No -Maxma DX 10" of Make- Bajaj or equivalent Make- of crompton/Havells)including necessary connection and replacement of flexible copper cable from ceiling rose and taking down of old unserviceable fan complete and depositing in the store yard of AGE E/M (N) Pune all as specified and as directed

Supply and fix for plastic body exhaust fan, AC single phase, 240 volts of size 300 mm sweep with louvers all as per Cat No. Maxma DX 1 300mm of Make Bajaj or equivalent of Make Crompton Greaves/ Havells with necessary connection and replacement of flexible copper cable from ceiling rose complete and taking down of old unserviceable fan complete and depositing in the store yard of AGE E/M (N) Pune all as specified and as directed.

S & F for LED post top lantern 40 watt light fitting made of cast aluminium spigot housing with decarative opal acrylic diffuser with IP 65 protection complete with all accessories fixed on GI pipe 50 mm dia including removal of old unserviceable one complete all as specified and directed. Make Bajaj Cat part No BGCL 40 W LED or its equavalent in Philips, Wipro.

S & F for metal flush box made of GI sheet 1.2 mm thick, 60 mm deep with each terminal including necessary cutting in wall and POP work as required for matching existing slot in wall of size 1 or 2 module including removal of old unserviceable one complete all as specified and as directed.

M&L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground vertically (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.50 mtr deep below normal ground level, connecting to GI earth wire 4mm dia by means of bolts, nuts, check nuts, and washers of galvanized iron or steel including 15 mm dia. medium grade protection pipe for earth lead complete with charcoal and common salt including watering arrangement with galvanized iron pipe light grade 20 mm dia, PCC Chamber, CI frame and cover, MS funnel with wire mesh all as shown in electrical plate no 3 of SSR part I including excavation and earthwork in any type of soil/strata and testing on completion. Note :- GI earth wire 4 mm dia and 15 mm dia protection pipe upto 7.5 mtr from earth plate is deemed to be included in rate quoted.

Attending the complaints of non functional of ceilling/exhaust/wall fan of any sweep and testing and repairing the ceilling/exhaust fan without taking down by replacing of fan Capcitor, fan regulator and connection wire etc. and making fan serviceable including checking the strengh of Clamp, down rod and provision of check nuts and split pin all as directed. (Note :- Item such as fan condenser, fan regulator, 1.5 sqmm, 3 core copper flexible cable shall be measured and paid seperataly as 'Supply Only'.)

Supply only fan Capcitor, 2.5 Mfd, 240 volts for ceiling fan including PVC clamp

Supply only Fan Capcitor, 4 Mfd, 240 volts for ceiling fan including PVC clamp

Supply only Exhaust fan capacitor 0.85/1.0 Mfd, 230 Volts incl PVC clamps as per sample complete all as specified and as directed.

Supply only Wall fan capacitor 1.5 Mfd, 230 Volts incl PVC clamps as per sample complete all as specified and as directed.

Supply only Copper conductor FRLS cable, 1.5 Sqmm, 3 core, 1100 Volt grade

Taking down ceiling of any size/ sweep after disconnecting the wire from existing ceiling rose for repair/ replacing the unsv bearing, gun metal bush or for rewinding and refixing the same after rewinding, cleaning dust, oiling greasing, servicing, and rubber reel with clamp and nut-bolts, washers, lock pin etc as existing including connecting flexible 3 core cable from ceiling rose to connector of fan, cleaning all dust etc all as directed spcified by Engineer-in-charge (Note- Ball bearing, gun metal bush, rubber reel with clamp, nut-bolts, blade assy, outer body, canopy, rotor, stator etc shall be measured and paid separetaly as 'Supply Only' and rewinding item shall be paid seperately under relevant item)

Supply only brass GM bush suitable for fan any size complete all as specified and as directed

Supply only Fan clamp with rubber reel insulator/bush, nut, check nut with bolt , washer and lock pin complete all as specified and as directed.

Supply only Ball bearing No 6201/6202/6203 suitable for ceiling fans complete all as specified and as directed.Make:SKF/NBC

Supply only Armature (Rotor) unit with shaft suitable for ceiling Fan 1200 mm sweep of make suitable to existing as per sample. The rotor shall be made up of a wire coil enveloped around an iron core. The magnetic component of the rotor shall be made from steel laminations to aid stamping conductor slots to specific shapes and sizes. This rotor should operate at a speed 1500 rpm (revolutions per minute) and 40% of its rated torque without excitation

Supply only Field winding (Stator) of ceiling fan 1200 mm sweep complete of make suitable to existing as per sample with starting and running coil and connectors. The core of the stator is made of steel frame enclosing a hollow cylindrical core bounded up of laminations of silicon steel and copper wounded. The stator should be electromagnet and suitable to energizes the field windings.

Supply only Outer body of ceiling Fan 1200mm sweep of make suitable to existing as per sample complete top and bottom with nut & bolt. The material of body shall be made of Aluminium alloy heavy duty suitable for accommodate the stator and rotor of above item of 3(b) and (c )

Supply only Ceiling Fan canopy white in colour PVC suitable for ceiling Fan 1200/1400 mm sweep of make suitable to existing as per sample complete top and bottom all as directed

M & L for rewinding of ceiling fan of any size with supper enameled copper wire of existing gauge including varnishing using nomex paper and drying complete reassembling & testing complete of size 1200 mm sweep complete all as specified and as directed.

M & L for rewinding of ceiling fan of any size with supper enameled copper wire of existing gauge including varnishing using nomex paper and drying complete reassembling & testing complete of size 1400 mm sweep complete all as specified and as directed.

S & F for ceiling fan down rods of 15 mm dia GI pipe to the existing trusses of any height including necessary welding & fixing with clamps and nut bolts etc complete all as specified and as directed.

Taking down ceiling fan of 1200mm sweep after disconnecting the wire from existing ceiling rose for painting with one coat white colour synthetic enamel paint by gun spray and filling cavaties with metalic fillar, after cleaning all dust etc including writing MES/ Sl No of fan all as specified and directed by Engineer-in-charge

Taking down ceiling fan of 1400mm after disconnecting the wire from existing ceiling rose for painting with one coat white colour synthetic enamel paint by gun spray and filling cavaties with metalic fillar, after cleaning all dust etc including writing MES/ Sl No of fan all as specified and directed by Engineer-in-charge

Taking down of Exhaust fan any make, 300 mm sweep from any location such as Kitchen/wash room after disconnecting the electric wire from existing ceiling rose for repair/replacing the under mentioned unsv spares and refixing the same after cleaning all dust including epoxy painting of one coat with existing colour and matching entire fan parts in same colour etc all as directed spcified by Engineer-in-charge

Supply only Exhaust fan metal body assembly with lowers and clamps of 4/3 Nos complete for 300mm sweep of make suitable to existing heavy duty suitable to accommodate motor assembly all as specified and as directed.

Supply only Motor assembly complete with Armature (Rotor) unit and Field winding (Stator) unit with shaft heavy duty suitable to fix in Exhaust Fan metal body assembly of 300mm sweep, make suitable to existing as per sample.

Supply Only Blade assembly with three blades suitable for metal body Exhaust Fan 300mm sweep heavy duty of make suitable to existing complete as per sample including key bolt/check bolt.

M & L for rewinding of exhaust fan of any size with supper enameled copper wire of existing gauge including varnishing and drying complete reassembling & testing complete of size 300 mm sweep complete all as specified and as directed.

Taking down of Exhaust fan any make, 250 mm sweep from any location such as Kitchen/wash room after disconnecting the electric wire from existing ceiling rose for repair/replacing the under mentioned unsv spares and refixing the same after cleaning all dust including epaxy painting of one coat with existing colour and matching entire fan parts in same colour etc all as directed spcified by Engineer-in-charge

Supply only Exhaust fan metal body assembly with lowers and clamps of 4/3 Nos complete for 250mm sweep of make suitable to existing heavy duty suitable to accommodate motor assembly all as specified and as directed.

Supply only Motor assembly complete with Armature (Rotor) unit and Field winding (Stator) unit with shaft heavy duty suitable to fix in Exhaust Fan metal body assembly of 250 mm sweep, make suitable to existing as per sample.

Supply Only Blade assembly with three blades suitable for metal body Exhaust Fan 250mm sweep heavy duty of make suitable to existing complete as per sample including key bolt/check bolt.

M & L for rewinding of exhaust fan of any size with supper enameled copper wire of existing gauge including varnishing and drying complete reassembling & testing complete of size 250 mm sweep complete all as specified and as directed.

Taking down of Exhaust fan any make, 450 mm sweep from any location such as Kitchen/wash room after disconnecting the electric wire from existing ceiling rose for repair/replacing the under mentioned unsv spares and refixing the same after cleaning all dust including epaxy painting of one coat with existing colour and matching entire fan parts in same colour etc all as directed spcified by Engineer-in-charge

Supply only Exhaust fan metal body assembly with lowers and clamps of 4/3 Nos complete for 450mm sweep of make suitable to existing heavy duty suitable to accommodate motor assembly all as specified and as directed.

Supply only Motor assembly complete with Armature (Rotor) unit and Field winding (Stator) unit with shaft heavy duty suitable to fix in Exhaust Fan metal body assembly of 450mm sweep, make suitable to existing as per sample.

Supply Only Blade assembly with three blades suitable for metal body Exhaust Fan 450mm sweep heavy duty of make suitable to existing complete as per sample including key bolt/check bolt.

M & L for rewinding of exhaust fan of any size with supper enameled copper wire of existing gauge including varnishing and drying complete reassembling & testing complete of size 450 mm sweep complete all as specified and as directed.

M & L for rewinding of wall fan of any size with supper enameled copper wire of existing gauge including varnishing and drying complete reassembling & testing complete of size 450/400 mm sweep complete all as specified and as directed.

M & L for mesh cover of wall fans having sweep of 450/400 mm complete all as specified and as directed.

M & L for PVC wall fan blades having 450/400 mm sweep complete all as specified and as directed.

M & L for installing automatic swinging assemblyfor wall fan having 450/400 mm sweep complete all as specified and as directed.

S & F of fabricated iron brackets, medium grade ms pipes any size,MS fan hooks,wall fan brackets etc

Attending the complaints of non functional and Preventive maintenance of storage type electric water heater (Geyser) of capacity 25/50 ltrs comprising of the following tasks at different locations of any make, complete all as specified and as directed.

(a) Inspection of geyser after opening bottom cover plate.

(b) Examine water tightness of storage tank.

(c) Carry out operation of all stop cocks, pressure reducing valves, etc. to ensure free movement of the working parts.

(d) Replace washers and glands of defective taps to ensure water tightness smooth functioning.

(e) Inspect vent pipes and remove blockage obstruction if any.

(f) Check and correct earth continuity of electrical items.

(g) Check and correct temperature setting of thermostats and test its functioning.

(h) Checking and adjustments of pressure reducing valves.

(i) Checking of dead weight type high pressure release valve (PRV) by removing dead weight protection cleaning the seat and ensuring that the waste hole is not blocked / chocked.

(k) Testing of Geysers after repairs/maintenance in all respect for proper functioning.

Taking down storage geyser of 25/ 50 litre capacity after disconnecting electrical connection from existing socket, removing the bolts and nuts from wall and disconnected inlet and outlet water connection for repair/ replacing the unsv items and assemble the same after making serviceable, cleaning dust including connecting flexible 3 core cable as required, painting the geyser complete, cleaning all dust, with proper filling of glass wool as heat resistance material, suitable quantity etc and refixing the geyser at it's original location complete all as directed spcified by Engineer-in-charge (Note- Spare parts of geyser shall be measured and paid separetaly as 'Supply Only' under relevant item)

Supply only following items:-

(a) Heating element long length suitable for cylidrical type geysers as per sample including rubber washers (ISI marked) of any type suitable to existing gyser of capacity 1500 watts .

(b)Heating element long length suitable for cylidrical type geysers as per sample including rubber washers (ISI marked) of any type suitable to existing gyser of capacity 2000 watts capacity

(c) Thermostat ISI marked analog type suitable for the Geysers 25 ltrs/ 50 ltrs capacity, 20 Amps, 240 Volts AC, adjustable type, 210 mm/ 300 mm long or nearest size as per sample

(d) PVC connections pipe with brass hexagonal adapters both side suitable for 15mm dia pipe 60cm long for cold water as per requirement.

(e) PVC connections pipe with brass hexagonal adapters both side suitable for 15mm dia pipe 60cm long for hot water as per requirement.

(f) Non-return valve 15mm dia of brass ISI marked as per requirement.

(f) Non-return valve20mm dia of brass ISI marked as per requirement.

(g) Indicators of Geysers red/green of any capacity/type as per site requirement.

(h) Cable PVC insulated 3 core 2.5 Sqmm with stranded copper conductor 1100 Volts grade from socket/switch to geyser as per requirement.

(j) 3 pin plug top, 16 amp capacity, 240 Volts AC, heavy duty, ISI marked

(k) Safety valve plug made out brass metal with fusible lead, inner thread type suitable for geyser of any type/capacity .

(l) Supply only metal outer body complete of stoage water heater 25 Ltr capacity any type (Vertical/Horizotal) make suitable to existing including reinforced PUF insulation with required dense as specified and as required to hold the temperature of hot water all as directed. Note : The quoted rate is deemed to inclusive taking out the geyser and refixing including transportation.

(m) Supply only High pressure resistance inner body and Special enamel-coated copper inner tank complete of stoage water heater 25 Ltr capacity any type (Vertical/Horizotal) make suitable to existing including PUF insulation all as specified

(n ) Supply only housing assembly of storage water heater 25 ltr cacacity suitable for installing heating Element and thermostat (verticle and horizantal type) as required as specified

(o) Supply only Copper sheathed heating elements short length for latest type geysers provides faster heating and lower energy consumption of 2KW capacity suitable for verticle and horizantal type as per sample as directed

( p) Supply only thermostat for the range of 25 to 90 degree celcius suitable for 25/50 ltr storege type water heater all as specified

(q) Supply only metal outer body complete of stoage water heater 50 Ltr capacity any type (Vertical/Horizotal) make suitable to existing including reinforced PUF insulation with required dense as specified and as required to hold the temperature of hot water all as directed. Note : The quoted rate is deemed to inclusive taking out the geyser and refixing including transportation.

(r) Supply only High pressure resistance inner body and Special enamel-coated copper inner tank complete of stoage water heater 50 Ltr capacity any type (Vertical/Horizotal) make suitable to existing including PUF insulation all as specified

(s ) Supply only housing assembly of storage water heater 50 ltr cacacity suitable for installing heating Element and thermostat (verticle and horizantal type) as required as specified

M & L for painting the stoage water heater 25 Ltr capacity any type (Vertical/Horizotal) with one coat with white colour synthetic enamel paint by spraying and filling cavaties with filler, after cleaning all dust etc including writing MES/ Sl No. all as specified and directed by Engineer-in-charge.

M & L for painting the stoage water heater 50 Ltr capacity any type (Vertical/Horizotal) with one coat with white colour synthetic enamel paint by spraying and filling cavaties with filler, after cleaning all dust etc including writing MES/ Sl No. all as specified and directed by Engineer-in-charge.

M & L writing letters or figures as "GE NORTH PUNE. MES NO 0000" with thick synthetic enamel paint black of suitable size / dimentions for ceiling fan, exhaust fan, geyser etc. as directed by Engr-in-Charge )

M&L for PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) for coping including necessary formwork as required complete all as specified and as directed.

M&L for preparation and painting with black japan paint to surfaces of iron brackets, medium grade ms pipes any size,MS fan hooks,wall fan brackets etc complete all as specified and directed by Engr-in-charge.Make:Asian Paints,Nerolac Paints,Berger Paints,Shalimar Paints

S & F in repairs ISI marked insulated unarmoured aluminium service wire 4sqmm 2 core

S & F in repairs ISI marked insulated unarmoured aluminium service wire 6sqmm 2 core

Note : 1. Performance security:- Refer Condition 22 of Special Conditions. 2. Quoted Contract Sum shall be arrived at after deducting the amount of Credit Schedule (refer Schedule of Credit in pdf form for quantity, rate and amount etc.) for old unserviceable materials retrieved from site.

ASHWAMEDH ENGINEERS

AN-ICON Engineering Technologies And Infrastructure Developments Pvt. Ltd

Chaulya Enterprises

M R ENTERPRISES

GRACE CONSTRUCTIONS

Fine-Tech. Electricals

Dheer Engineering

M/S - FRONTLINE ELECTRO SYNDICATE

K.K.Enterprises