Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹21.6 CrAccepted-Finance | ₹21.6 Cr | L1 | Accepted-Finance Accept |
| 2 | L2₹22.2 CrAccepted-Finance | ₹22.2 Cr | L2 | Accepted-Finance Accept |
Tender Value
₹17.2 Cr
EMD Value
₹21.2 L
Closing Date
18 Sept 2023, 2:30 pmClosed
Executive Engineer, PWD, WD-II, Diu
Executive Engineer, PWD, WD-II, Fort Road, Diu
Installation of Electrical, ELV, HVAC and fire Fighting system work of Annexe Circuit House Near Jallandhar,Diu.
2023_DIUDT_3081_1
e-Tender Notice No. 37/2023-2024
Open Tender
Civil Works - Others
180 days
Diu
Please refer Tender documents.
2 documents required · 2 mandatory
₹10,000
Executive Engineer, PWD, WD-II, Diu
₹21.2 L
Executive Engineer, PWD, WD-II, Diu
26 Sept 2023
2 Sept 2023
18 Sept 2023
2 Sept 2023
18 Sept 2023
2 Sept 2023
8 Sept 2023
Amount
Works
SEC03 -ELECTRICAL WORKS ELW 01.00 HT G.O.D Supplying, Installation,Testing & Commissioning of HT DP Structure with necessary civil works as per specification and Details given below. a) 1 set of 11 kV Double pole MS structure (10 meters) b) 3 Nos. 9kV Gapless Lightning Arresters c) 1 no. 400 Amps GOD d) 1 set DO fuses e) 1 set of MS Channel (ISMC 75X40) supports f) 1 Set of Pin Insulators (as required) g) 1 set of Disc insulators (as required) h) 1 set of Stay wire (as required) i) ACSR DOG conductor with Raychem insulation tap (as required) j) other accessories & hardware to make system complete in all respect as per standard design practice and CEIG norms and with complete in all respect as directed by engineer in charge and Higher Authority.
Leveling & rubble soiling the switchyard and ground with 1" size metal for a height of 150 mm from ground level for 6 x 6 mtr area with complete in all respect as directed by engineer in charge and Higher Authority.
SITC of Chain link fencing 50 x 50 mm Square of 10 SWG GI wire,2m height with gate for switchyard of 10 x 6 m and Runs of barbed wire above with complete in all respect as directed by engineer in charge and Higher Authority.
Supplying, Installtion,Testing, Commissioning & unloading at site, shifting to the erection site assembling, leveling, grouting, installing, field testing and commissioning of 1000KVA Package Substation HT Side : SF6 gas insulated Compact VCB: Sheet steel enclosed, free standing, indoor mounted, 11kV, 630A, 21kA/3s, 1 WAY Non - extensible RMU Transformer : 1000 KVA , 11/0.433KV DYn11 Cast resin dry type transformer with On load tap changer, tapping range of +7.5% to -7.5% in steps of 2.5%, Z% : 5% (IST) Class F insulation , temp rise : 90 DegC , 3nos. Surge arrestors 9kV 5kA polymeric make Asiatic make/ Eq, 1 no. Digital WTI with Alarm & Trip contacts LT Side : 1600A 4P ACB, Manual Fixed, 50 KA, Microprocessor Based Release with 1600A 4P Aluminium PVC sleeved Busbar from transformer Secondary to LT Section (Current density - 0.8A/ sq.mm) and with complete in all respect as directed by engineer in charge and Higher Authority.
ELW 05.00 Substation Equipment and substaion Auxiliary SITC of 11 KV, 3 core Al. 120 sqmm H.T. XLPE armoured unearth cable.
SITC of H.T. cable indoor type end connection for 11 KV XLPE, 120 sq mm x 3 core cable with all accessories including lugs
SITC of H.T. cable outdoor type end connection for 11 KV XLPE, 120 sq mm x 3 core cable with all accessories including lugs
Suppplying & Erecting automatic emergency light with maintenance free battery for 2 X 18 watts CFL tube. With exide make battery
Supplying & Erecting Rubber mat 1.1 KV grade ISI marked 1000 x 2000 x 4 mm size. as per IS 5424.
Supplying & Erecting Rubber mat 11 KV grade ISI marked 1000 x 2000 x 12 mm size. as per IS 5424..
Providing and erecting danger notice board for medium voltage installation to be erected as per I.S. The board should be 150 x 150 mm.
Providing and erecting danger notice board for high voltage installation to be erected as per I.S.
Providing and fixing printed instruction chart both in English & REGIONAL LANGUAGE & duly framed out on glass for treatment of person suffering from Electric shock.
Providing pair of rubber hand gloves suitable for working on 11 KV/22 KV supply.
Supplying and fixing Standard First aid box with all the Standard contents.
Supplying and instaling FIRE bucket round bottom of 9 litres capacity made out of 24 gauge G.I. sheet with extra handle at bottom duly painted white inside and Red out side with FIRE mark, filled with dry-sand and kept on existing stand provided or hung on wall hook..
Supplying & Erecting 1.5 mtr. (5') x 0.9 mtr. (3.1') x 0.6 mtr. (2.1') Floor mounted stand (For keeping 4 Nos.of buckets) made of 30 x 30 x 4 mm. angle iron welded with 4 hooks and duly painted with one coat of red lead & two coats of Approved enameled silver paints.
Supply installation testing and commissionning of Wall hooks of 22 to 25 cms. projection for keeping fire buckets made out of 15 mm. dia M.S. rod grouted in wall to a depth of minimum 15 cms.
ELW 06.00 MV Switch Gear and power Panel Supplying, unloading at site, shifting to site, assembling, leveling, grouting, erecting, Testing, & Commissioning compartmentalized type Panels with powder coated fabricated from CRCA sheet & folded channel totally enclosed cubical type with pad lock arrangement complete in all respect as per detail tedner specifications. The successful tenderer will have to prepare general arrangement with dimensions & get it approve through Engineer In charge / Consultant.Panels should be as per detail single line drawing with required nos of incoming and outgoing feeders and accessories and with complete in all respect as directed by engineer in charge and Higher Authority. MAIN PANEL As per Single line diagram
450KVAR APFCR PANEL As per Single line diagram
MAIN LT PANEL As per Single line diagram
SMDB-LIGHTING-1 As per Single line diagram
SMDB-LIGHTING-2 As per Single line diagram
SMDB-LIGHTING-3 As per Single line diagram
SMDB-LIGHTING-4 As per Single line diagram
HVAC PANEL-1 (NON DG) As per Single line diagram
HVAC PANEL-2 As per Single line diagram
HVAC PANEL-3 As per Single line diagram
HVAC PANEL-4 As per Single line diagram
SMDB-UTILITY-3 As per Single line diagram
SMDB-UPS As per Single line diagram
SMDB-KITCHEN As per Single line diagram
EXTERNAL LIGHTING PANEL As per Single line diagram
ELW 07.00 DG Set with Sync. panel Supplying, installation, testing and commissioning of DG set of 2#600 KVA with approximate 604 BHP engine with enclouser & suitable alternator complete with all necessary fuel piping, Aluminium cladding, exhaust piping, control panel, Auto on-off, Sync. Panel, silencer & its piping, Acoustic silencer, Alternator cable termination box suitable for Aluminium cables,initial battery charging,base frame, battery and charger complete in all respect. Scope also includes preparing necessary drawing submitting to authorities, getting their approval / sanction and final certificate including NOC from pollution board(if required) to energize the D G Set . (Rate Includes 2 Nos. of 600 kVA Dg set & Sync. Panels etc. as per SLD) and with complete in all respect as directed by engineer in charge and Higher Authority.
ELW 08.00 Distribution BoardDISTRIBUTION BOARD Supplying, assembling, grouting, levelling, installation, Connecting,testing and commissioning of D.B of specified make with MCB / ELMCB /MCCB etc with all internal busbar as per requirement.TPN Distribution Board :Supplying, erecting, testing and commissioning of only TPN D.B. with 63A FPMCB as incoming and 3 nos 63A DPELCB,30mA and 42 nos 6-32A SPMCB as outgoing (i.e. 16 way TPN D.B.) with 16 way PPI kit and with complete in all respect as directed by engineer in charge and Higher Authority.
Supplying, assembling, grouting, levelling, installation, Connecting,testing and commissioning of D.B of specified make with MCB / ELMCB /MCCB etc with all internal busbar as per requirement.TPN Distribution Board :Supplying, erecting, testing and commissioning of only TPN D.B. with 25A FPMCB as incoming and 3 nos 25A DPELCB,30mA and 30 nos 6-32A SPMCB as outgoing (i.e. 12 way TPN D.B.) with 12 way PPI kit and with complete in all respect as directed by engineer in charge and Higher Authority.
Supplying, assembling, grouting, levelling, installation, Connecting,testing and commissioning of D.B of specified make with MCB / ELMCB /MCCB etc with all internal busbar as per requirement.TPN Distribution Board :Supplying, erecting, testing and commissioning of only TPN D.B. with 40A FPMCB as incoming and 3 nos 40A DPELCB,30mA and 30 nos 6-32A SPMCB as outgoing (i.e. 12 way TPN D.B.) with 12 way PPI kit and with complete in all respect as directed by engineer in charge and Higher Authority.
Supplying, assembling, grouting, levelling, installation, Connecting,testing and commissioning of D.B of specified make with MCB / ELMCB /MCCB etc with all internal busbar as per requirement.TPN Distribution Board :Supplying, erecting, testing and commissioning of only TPN D.B. with 63A FPMCB as incoming and 3 nos 40A DPELCB,30mA and 30 nos 6-32A SPMCB as outgoing (i.e. 12 way TPN D.B.) with 12 way PPI kit and with complete in all respect as directed by engineer in charge and Higher Authority.
Supplying, assembling, grouting, levelling, installation, Connecting,testing and commissioning of D.B of specified make with MCB / ELMCB /MCCB etc with all internal busbar as per requirement.TPN Distribution Board :Supplying, erecting, testing and commissioning of only TPN D.B. with 63A FPMCB as incoming and 3 nos 63A DPELCB,30mA and 30 nos 6-32A SPMCB as outgoing (i.e. 12 way TPN D.B.) with 12 way PPI kit and with complete in all respect as directed by engineer in charge and Higher Authority.
Supplying, assembling, grouting, levelling, installation, Connecting,testing and commissioning of D.B of specified make with MCB / ELMCB /MCCB etc with all internal busbar as per requirement.TPN Distribution Board :Supplying, erecting, testing and commissioning of only TPN D.B. with 25A / 32A FPMCB as incoming and 3 nos 25A DPELCB,30mA and 18 nos 6-25A SPMCB as outgoing (i.e. 8 way TPN D.B.) with 8 way PPI kit and with complete in all respect as directed by engineer in charge and Higher Authority.
Supplying, assembling, grouting, levelling, installation, Connecting,testing and commissioning of D.B of specified make with MCB / ELMCB /MCCB etc with all internal busbar as per requirement.TPN Distribution Board :Supplying, erecting, testing and commissioning of only TPN D.B. with 63A FPMCB as incoming and 3 nos 63A DPELCB,30mA and 18 nos 6-32A SPMCB as outgoing (i.e. 8 way TPN D.B.) with 8 way PPI kit and with complete in all respect as directed by engineer in charge and Higher Authority.
Supplying, assembling, grouting, levelling, installation, Connecting,testing and commissioning of D.B of specified make with MCB / ELMCB /MCCB etc with all internal busbar as per requirement.TPN Distribution Board :Supplying, erecting, testing and commissioning of only TPN D.B. with 25A / 32A FPMCB as incoming and 3 nos 25A DPELCB,30mA and 12 nos 6-32A SPMCB as outgoing (i.e. 6 way TPN D.B.) with 6 way PPI kit and with complete in all respect as directed by engineer in charge and Higher Authority.
Supplying, assembling, grouting, levelling, installation, Connecting,testing and commissioning of D.B of specified make with MCB / ELMCB /MCCB etc with all internal busbar as per requirement.TPN Distribution Board :Supplying, erecting, testing and commissioning of only TPN D.B. with 63A FPMCB as incoming and 3 nos 63A DPELCB,30mA and 12 nos 6-32A SPMCB as outgoing (i.e. 6 way TPN D.B.) with 6 way PPI kit and with complete in all respect as directed by engineer in charge and Higher Authority.
Supplying, assembling, grouting, levelling, installation, Connecting,testing and commissioning of D.B of specified make with MCB / ELMCB /MCCB etc with all internal busbar as per requirement.VTPN Distribution Board :Supplying, erecting, testing and commissioning of only VTPN D.B. with 125A FPMCCB as incoming and 3 nos 63A TPMCB, 3 nos 40A TPMCB and 6 nos 6-32A TPMCB as outgoing (i.e. 12 way VTPN D.B.) and with complete in all respect as directed by engineer in charge and Higher Authority.
SPN Distribution Board : Supplying, erecting, testing and commissioning of SPN D.B. with space for 25A DPECB,30mA as incoming and 6 6-25A SPMCB as outgoing per phase (i.e. 8 way SPN D.B.) and with complete in all respect as directed by engineer in charge and Higher Authority.
Supplying, erecting, testing and commissioning of 40 Amp DP Dinrail Mounted Contactor
Supplying, erecting, testing and commissioning of SPN D.B. of 12 way double door SPN DB with 40A DPELCB, 30mA as incomer with 8 nos 6-25A SPMCB as outgoing.
Supplying, erecting, testing and commissioning of SPN D.B. of 16 way double door SPN DB with 40A DPELCB, 30mA as incomer with 10 nos 6-25A SPMCB as outgoing.
Supplying, erecting, testing and commissioning of SPN D.B. suitable for outdoor mounting IP 65 with space for DPMCB as incoming and 2 SPMCB as outgoing (i.e. 4 way SPN D.B.) to Hensel make cat No.. KV 7104 and with complete in all respect as directed by engineer in charge and Higher Authority.
VTPN Distribution Board: Supplying,erecting, testing and commissioning of only VTPN D.B. having suitable space for 100A FP MCCB, as incomer and 8 TP MCBs as outgoing - Kitchen VTPNDB / Utility and with complete in all respect as directed by engineer in charge and Higher Authority.
VTPN Distribution Board Supplying,erecting, testing and commissioning of only VTPN D.B. having suitable space for 40A FP MCB, as incomer and 4 TP MCBs as outgoing - HVAC IDU VTPNDB and with complete in all respect as directed by engineer in charge and Higher Authority.
SITC of 40 A FP ELMCB(ELCB+MCB) (100mA) with 8way Metal enclosure
16A /20A / 25A / 32 A DP ELCB (30mA)
Caution Board : SITC of Caution boards of size 150 x 150 mm. to be supplied & fixed on the D.B.
ELW 9.00 CABLE TRENCH Excavation and back filling of cable trenches required for laying the cables directly buried in the ground. This includes supplying and providing cable markers at an interval of 10 meters. The depth shall be app. 0.9mtr and the width shall be as per requirement and with complete in all respect as directed by engineer in charge and Higher Authority.
Covering of cable with second class bricks or cement tiles laid cover the cable crosswise & also on both sides with covering of 7. 5 Cms. layer of sand above & below cable (16 bricks per meter) and with complete in all respect as directed by engineer in charge and Higher Authority.
Supply, testing and Laying and commissioning of XLPE steel wire/flat armoured cable of 1100 V grade of Aluminum Conductor of following sizes in ready made trench or mounted on wall with necessary clamping arrangement or in pre-laid RCC hume pipe with necessary cable identification mark to be provided at distance of 10 mt. The vertical cable on wall shall be drawn in prelaid conduit for vertical mechanical support and with complete in all respect as directed by engineer in charge and Higher Authority. 300 Sq.mm x 3.5C Al. Cable
Supply, testing and Laying and commissioning of XLPE steel wire/flat armoured cable of 1100 V grade of Aluminum Conductor of following sizes in ready made trench or mounted on wall with necessary clamping arrangement or in pre-laid RCC hume pipe with necessary cable identification mark to be provided at distance of 10 mt. The vertical cable on wall shall be drawn in prelaid conduit for vertical mechanical support and with complete in all respect as directed by engineer in charge and Higher Authority. 240 Sq.mm x 3.5C Al. Cable
Supply, testing and Laying and commissioning of XLPE steel wire/flat armoured cable of 1100 V grade of Aluminum Conductor of following sizes in ready made trench or mounted on wall with necessary clamping arrangement or in pre-laid RCC hume pipe with necessary cable identification mark to be provided at distance of 10 mt. The vertical cable on wall shall be drawn in prelaid conduit for vertical mechanical support and with complete in all respect as directed by engineer in charge and Higher Authority. 185 Sq.mm x 3.5C Al. Cable
Supply, testing and Layingand commissioning of XLPE steel wire/flat armoured cable of 1100 V grade of Aluminum Conductor of following sizes in ready made trench or mounted on wall with necessary clamping arrangement or in pre-laid RCC hume pipe with necessary cable identification mark to be provided at distance of 10 mt. The vertical cable on wall shall be drawn in prelaid conduit for vertical mechanical support and with complete in all respect as directed by engineer in charge and Higher Authority. 150 Sq.mm x 3.5C Al. Cable
Supply, testing and Laying and commissioning of XLPE steel wire/flat armoured cable of 1100 V grade of Aluminum Conductor of following sizes in ready made trench or mounted on wall with necessary clamping arrangement or in pre-laid RCC hume pipe with necessary cable identification mark to be provided at distance of 10 mt. The vertical cable on wall shall be drawn in prelaid conduit for vertical mechanical support and with complete in all respect as directed by engineer in charge and Higher Authority. 120 Sq.mm x 3.5C Al. Cable
Supply, testing and Laying and commissioning of XLPE steel wire/flat armoured cable of 1100 V grade of Aluminum Conductor of following sizes in ready made trench or mounted on wall with necessary clamping arrangement or in pre-laid RCC hume pipe with necessary cable identification mark to be provided at distance of 10 mt. The vertical cable on wall shall be drawn in prelaid conduit for vertical mechanical support and with complete in all respect as directed by engineer in charge and Higher Authority. 95 Sq.mm x 3.5C Al. Cable
Supply, testing and Laying and commissioning of XLPE steel wire/flat armoured cable of 1100 V grade of Aluminum Conductor of following sizes in ready made trench or mounted on wall with necessary clamping arrangement or in pre-laid RCC hume pipe with necessary cable identification mark to be provided at distance of 10 mt. The vertical cable on wall shall be drawn in prelaid conduit for vertical mechanical support and with complete in all respect as directed by engineer in charge and Higher Authority. 70 Sq.mm x 3.5C Al. Cable
Supply, testing and Laying and commissioning of XLPE steel wire/flat armoured cable of 1100 V grade of Aluminum Conductor of following sizes in ready made trench or mounted on wall with necessary clamping arrangement or in pre-laid RCC hume pipe with necessary cable identification mark to be provided at distance of 10 mt. The vertical cable on wall shall be drawn in prelaid conduit for vertical mechanical support and with complete in all respect as directed by engineer in charge and Higher Authority. 50 Sq.mm x 3.5C Al. Cable
Supply, testing and Laying and commissioning of XLPE steel wire/flat armoured cable of 1100 V grade of Aluminum Conductor of following sizes in ready made trench or mounted on wall with necessary clamping arrangement or in pre-laid RCC hume pipe with necessary cable identification mark to be provided at distance of 10 mt. The vertical cable on wall shall be drawn in prelaid conduit for vertical mechanical support and with complete in all respect as directed by engineer in charge and Higher Authority. 35 Sq.mm x 3.5C Al. Cable
Supply, testing and Laying and commissioning of XLPE steel wire/flat armoured cable of 1100 V grade of Aluminum Conductor of following sizes in ready made trench or mounted on wall with necessary clamping arrangement or in pre-laid RCC hume pipe with necessary cable identification mark to be provided at distance of 10 mt. The vertical cable on wall shall be drawn in prelaid conduit for vertical mechanical support and with complete in all respect as directed by engineer in charge and Higher Authority. 25 Sq.mm x 4C Al. Cable
Supply, testing and Laying and commissioning of XLPE steel wire/flat armoured cable of 1100 V grade of Aluminum Conductor of following sizes in ready made trench or mounted on wall with necessary clamping arrangement or in pre-laid RCC hume pipe with necessary cable identification mark to be provided at distance of 10 mt. The vertical cable on wall shall be drawn in prelaid conduit for vertical mechanical support and with complete in all respect as directed by engineer in charge and Higher Authority. 16 Sq.mm x 4C Al. Cable
Supply, testing and Laying and commissioning of XLPE steel wire/flat armoured cable of 1100 V grade of Aluminum Conductor of following sizes in ready made trench or mounted on wall with necessary clamping arrangement or in pre-laid RCC hume pipe with necessary cable identification mark to be provided at distance of 10 mt. The vertical cable on wall shall be drawn in prelaid conduit for vertical mechanical support and with complete in all respect as directed by engineer in charge and Higher Authority. 10 Sq.mm x 4C Al. Cable
Supply, testing and Laying and commissioning of XLPE steel wire/flat armoured cable of 1100 V grade of Copper Conductor of following sizes in ready made trench or mounted on wall with necessary clamping arrangement or in pre-laid RCC hume pipe with necessary cable identification mark to be provided at distance of 10 mt. The vertical cable on wall shall be drawn in prelaid conduit for vertical mechanical support and with complete in all respect as directed by engineer in charge and Higher Authority. 16 Sq.mm x 4C CU. Cable
Supply, testing and Laying and commissioning of XLPE steel wire/flat armoured cable of 1100 V grade of Copper Conductor of following sizes in ready made trench or mounted on wall with necessary clamping arrangement or in pre-laid RCC hume pipe with necessary cable identification mark to be provided at distance of 10 mt. The vertical cable on wall shall be drawn in prelaid conduit for vertical mechanical support and with complete in all respect as directed by engineer in charge and Higher Authority. 10 Sq.mm x 4C CU. Cable
Supply, testing and Laying and commissioning of XLPE steel wire/flat armoured cable of 1100 V grade of Copper Conductor of following sizes in ready made trench or mounted on wall with necessary clamping arrangement or in pre-laid RCC hume pipe with necessary cable identification mark to be provided at distance of 10 mt. The vertical cable on wall shall be drawn in prelaid conduit for vertical mechanical support and with complete in all respect as directed by engineer in charge and Higher Authority. 6 Sq.mm x 4c CU. Cable
Supply, testing and Laying and commissioning of XLPE steel wire/flat armoured cable of 1100 V grade of Copper Conductor of following sizes in ready made trench or mounted on wall with necessary clamping arrangement or in pre-laid RCC hume pipe with necessary cable identification mark to be provided at distance of 10 mt. The vertical cable on wall shall be drawn in prelaid conduit for vertical mechanical support and with complete in all respect as directed by engineer in charge and Higher Authority. 4 Sq.mm x 4c CU. Cable
Supply, testing and Laying and commissioning of XLPE steel wire/flat armoured cable of 1100 V grade of Copper Conductor of following sizes in ready made trench or mounted on wall with necessary clamping arrangement or in pre-laid RCC hume pipe with necessary cable identification mark to be provided at distance of 10 mt. The vertical cable on wall shall be drawn in prelaid conduit for vertical mechanical support and with complete in all respect as directed by engineer in charge and Higher Authority. 6 Sq.mm x 3c CU. Cable
Supply, testing and Laying and commissioning of XLPE steel wire/flat armoured cable of 1100 V grade of Copper Conductor of following sizes in ready made trench or mounted on wall with necessary clamping arrangement or in pre-laid RCC hume pipe with necessary cable identification mark to be provided at distance of 10 mt. The vertical cable on wall shall be drawn in prelaid conduit for vertical mechanical support and with complete in all respect as directed by engineer in charge and Higher Authority. 4 Sq.mm x 3c CU. Cable
Supply, testing and Laying and commissioning of XLPE steel wire/flat armoured cable of 1100 V grade of Copper Conductor of following sizes in ready made trench or mounted on wall with necessary clamping arrangement or in pre-laid RCC hume pipe with necessary cable identification mark to be provided at distance of 10 mt. The vertical cable on wall shall be drawn in prelaid conduit for vertical mechanical support and with complete in all respect as directed by engineer in charge and Higher Authority. 2.5 Sq.mm x 3c CU. Cable
SITC of Brass glands & making joint with necessary bi metalic crimping socket of long nack type connecting the same to various equipment / panel / DB etc. for the following sizes: 300 Sq.mm x 3.5C Al. Cable and with complete in all respect as directed by engineer in charge and Higher Authority.
SITC of Brass glands & making joint with necessary bi metalic crimping socket of long nack type connecting the same to various equipment/panel/DB etc.and with complete in all respect as directed by engineer in charge and Higher Authority. for the following sizes: 240 Sq.mm x 3.5C Al. Cable
SITC of Brass glands & making joint with necessary bi metalic crimping socket of long nack type connecting the same to various equipment/panel/DB etc. and with complete in all respect as directed by engineer in charge and Higher Authority. for the following sizes: 185 Sq.mm x 3.5C Al. Cable
SITC of Brass glands & making joint with necessary bi metalic crimping socket of long nack type connecting the same to various equipment/panel/DB etc.and with complete in all respect as directed by engineer in charge and Higher Authority. for the following sizes: 150 Sq.mm x 3.5C Al. Cable
SITC of Brass glands & making joint with necessary bi metalic crimping socket of long nack type connecting the same to various equipment/panel/DB etc. and with complete in all respect as directed by engineer in charge and Higher Authority. for the following sizes: 120 Sq.mm x 3.5C Al. Cable
SITC of Brass glands & making joint with necessary bi metalic crimping socket of long nack type connecting the same to various equipment/panel/DB etc. and with complete in all respect as directed by engineer in charge and Higher Authority.for the following sizes: 95 Sq.mm x 3.5C Al. Cable
SITC of Brass glands & making joint with necessary bi metalic crimping socket of long nack type connecting the same to various equipment/panel/DB etc. and with complete in all respect as directed by engineer in charge and Higher Authority.for the following sizes: 70 Sq.mm x 3.5C Al. Cable
SITC of Brass glands & making joint with necessary bi metalic crimping socket of long nack type connecting the same to various equipment/panel/DB etc. and with complete in all respect as directed by engineer in charge and Higher Authority. for the following sizes: 50 Sq.mm x 3.5C Al. Cable
SITC of Brass glands & making joint with necessary bi metalic crimping socket of long nack type connecting the same to various equipment/panel/DB etc. and with complete in all respect as directed by engineer in charge and Higher Authority. for the following sizes: 35 Sq.mm x 3.5C Al. Cable
SITC of Brass glands & making joint with necessary bi metalic crimping socket of long nack type connecting the same to various equipment/panel/DB etc. and with complete in all respect as directed by engineer in charge and Higher Authority. for the following sizes: 25 Sq.mm x 4C Al. Cable
SITC of Brass glands & making joint with necessary bi metalic crimping socket of long nack type connecting the same to various equipment/panel/DB etc. and with complete in all respect as directed by engineer in charge and Higher Authority.for the following sizes: 16 Sq.mm x 4C Al. Cable
SITC of Brass glands & making joint with necessary bi metalic crimping socket of long nack type connecting the same to various equipment/panel/DB etc. and with complete in all respect as directed by engineer in charge and Higher Authority.for the following sizes: 10 Sq.mm x 4C Al. Cable
SITC of Brass glands & making joint with necessary bi metalic crimping socket of long nack type connecting the same to various equipment/panel/DB etc. and with complete in all respect as directed by engineer in charge and Higher Authority. for the following sizes: 16 Sq.mm x 4C CU. Cable
SITC of Brass glands & making joint with necessary bi metalic crimping socket of long nack type connecting the same to various equipment/panel/DB etc. and with complete in all respect as directed by engineer in charge and Higher Authority. for the following sizes: 10 Sq.mm x 4C CU. Cable
SITC of Brass glands & making joint with necessary bi metalic crimping socket of long nack type connecting the same to various equipment/panel/DB etc. and with complete in all respect as directed by engineer in charge and Higher Authority. for the following sizes: 6 Sq.mm x 4C CU. Cable
SITC of Brass glands & making joint with necessary bi metalic crimping socket of long nack type connecting the same to various equipment/panel/DB etc. and with complete in all respect as directed by engineer in charge and Higher Authority. for the following sizes: 4 Sq.mm x 4C CU. Cable
SITC of Brass glands & making joint with necessary bi metalic crimping socket of long nack type connecting the same to various equipment/panel/DB etc. and with complete in all respect as directed by engineer in charge and Higher Authority. for the following sizes: 6 Sq.mm x 3c CU. Cable
SITC of Brass glands & making joint with necessary bi metalic crimping socket of long nack type connecting the same to various equipment/panel/DB etc. for the following sizes: 4 Sq.mm x 3c CU. Cable
SITC of Brass glands & making joint with necessary bi metalic crimping socket of long nack type connecting the same to various equipment/panel/DB etc.and with complete in all respect as directed by engineer in charge and Higher Authority. for the following sizes: 2.5 Sq.mm x 3c CU. Cable
ELW 12.00 Cable Tray Supply, Installation, testing and commissioning of hot dip GI ladder type cable tray with all accessories like coupler, GI nut bolts,bend, tee, reduser etc as per specification and drawings complete with all required hardware and with complete in all respect as directed by engineer in charge and Higher Authority. 100 x 50 made out of 2 mm thick ladder type
Supply, Installation, testing and commissioning of hot dip GI ladder type cable tray with all accessories like coupler, GI nut bolts,bend, tee, reduser etc as per specification and drawings complete with all required hardware and with complete in all respect as directed by engineer in charge and Higher Authority. 150 x 50 made out of 2 mm thick ladder type
Supply, Installation, testing and commissioning of hot dip GI ladder type cable tray with all accessories like coupler, GI nut bolts,bend, tee, reduser etc as per specification and drawings complete with all required hardware and with complete in all respect as directed by engineer in charge and Higher Authority. 300 x 50 made out of 2 mm thick ladder type
Supply, Installation, testing and commissioning of hot dip GI ladder type cable tray with all accessories like coupler, GI nut bolts,bend, tee, reduser etc as per specification and drawings complete with all required hardware and with complete in all respect as directed by engineer in charge and Higher Authority. 450 x 50 made out of 2 mm thick ladder type
Supply, Installation, testing and commissioning of hot dip GI ladder type cable tray with all accessories like coupler, GI nut bolts,bend, tee, reduser etc as per specification and drawings complete with all required hardware and with complete in all respect as directed by engineer in charge and Higher Authority. 600 x 50 made out of 2 mm thick ladder type
Supply, Installation, testing and commissioning of hot dip GI ladder type cable tray with all accessories like coupler, GI nut bolts,bend, tee, reduser etc as per specification and drawings complete with all required hardware and with complete in all respect as directed by engineer in charge and Higher Authority. 750 x 50 made out of 2 mm thick ladder type
Supplying , fabricating and installation of various sizes clamps for cable tray supports using available M.S. sections & rod as per drawings or instructions of engineer in charge or consultant including applying zinc chromate yellow oxide and two to three coats of required enamel paints with anchor fasteners etc. and with complete in all respect as directed by engineer in charge and Higher Authority.
ELW 14.00 Internal Wiring WITH MODULAR TYPE SWITCHES Wiring of points to be done in open/concealed manner in 25 mm dia medium guage Rigid PVC FRLS pipe. Wiring shall be done with FRLS type copper flexible wire of 650V/1100V. Separate pipe should be taken for circuit mains. Nos of ciruit of the same phases may be taken in same conduit .The circuit shall be laid in 25/40 mm dia medium guage rigid PVC FRLS pipe.The point rate shall include all the necessary piping and wiring from sub panel / Distribution board to switch board & switch board to the batten holder / angle holder / connector / ceiling rose all inclusive except sub panel / Dist board. The wiring shall be done as per relevant prevailing standard. The looping of the wiring should be done in the switch boxes or light and fan point outlet boxes to avoid the junction boxes. The junction boxes and switch boxes for the ceiling light point, fan point etc shall be minimum 60/75 deep. All the necessary jarry in brick plastered walls should be done with machine cutter only , also jarry should be filled with cement, sand and wire mesh as required, the material cost for rough finish shall be included in point rate.Whenever pipes are required to be laid in flooring shall be of.Wiring should be done as per distribtion details. Each circuit should have dedicated phase, neutral & earth wire. Wire sizes to be used as under For Light Points /fan point/ wall fan / 6A 3 Pin Plug - DB to SB - 2.5sqmm for Phase & Neutral & 1.5 sqmm for Earth - SB to on board Point - 1.5 sqmm for Phase & Neutral & Earth For 6A Plug point. - 1.5 sqmm for Phase, Neutral & Earth For 6/10/16A general purpose plug point - 2.5 sqmm for Phase, Neutral & 1.5 sqmm Earth For 16A plug point for A/C and Geyser - 4 Sqmm for Phase, Neutral & 2.5 sqmm Earth For 20/32A plug point - 6 sqmm for Phases, Neutral & 4 sqmm Earth No zarry will be allowed in expose brick work. The conduit shall be provided when the walls are under construction. The pipes in slab shall be laid before the slab is casted. One light point controlled by one single way 6 A switch.
Loop light point to be controlled from same switch.(Looping from first point)
One light point controlled by two, two way 6 A switch
One ceiling fan outlet point controlled by one 6 A switch and hum free electronic type step regulator and cast iron fan box.
One 6 A x 5 pin 250 Volt universal socket outlet point controlled by one 6 A switch located on switch board.
6 A x 5 pin 250 Volt universal switched socket outlet point at convenient location.
6/16 A x 250 V switch socket point on one switch box with 2.5 sqmm flexible wires and phase and neutral and 1.5 sq nm flexible Cu. wire as earth wire. The rate should include conduiting upto DB.
6/16A x 250 Volt switched socket outlet point with 4 sq.mm wire for phase and neutral & 2.5 sq.mm earth wire.
32A key tag switch for each room - card type key tag - wiring to be done with 2 nos 1.5 sq.mm cu. Wire
Exhaust fan outlet point with 6A 5 pin socket controlled by one 5 single way switch located at different location.
Bell point controlled by Bell push module of "Do Not Disturb indicator lamp" + "make my room indicator lamp" and bell switch with internal logic pre programmed with Buzzer / bell of approved make.
SITC computer power supply point with 2 nos of 6 amp 5 pin socket with 1 no. of 6/16 Amp. socket with 1 no 16 A Switch with indicator & wiring of computer point will be done through 2 nos.of 2.5 sq. mm Cu. wires as phase & Neutral and 1 nos. of 1.5 sq.mm.as earth wire. .( This cost includes the wiring from DB to Computer point.)
SITC of Outdoor Type 6/16A Socket with Switch, Suitable for outdoor appication (IP66) with 3 nos 2.5 sq.mm wire
SITC of Metal Clad Switch Socket with 20A DP MCB (2P+E)
SITC of Metal Clad Switch Socket with 32A DP MCB (2P+E)
SITC of Metal Clad Switch Socket with 20A FP ELMCB (2P+E)
SITC of Metal Clad Switch Socket with 32A FP ELMCB (P+E)
MAINS The mains is considered from the meter/sub panel to the individual distribution boards. Supplying and Laying mains with 4 nos. of 25 sq mm Cu. PVC insulated FRLS flexible wire with ISI approval for 650 V/ 1100 V and 2 nos 10 sqmm Cu. PVC insulated flexible wires with ISI approval for 650 V/ 1100 V as earth wires to be drawn in 50 mm diameter rigid PVC conduit of medium guage having ISI and FIA and with complete in all respect as directed by engineer in charge and Higher Authority. (4 x one Wire 25 sqmm / 2 x oneWire 10 sqmm / 1 x 50 mm pvc pipe)
SITC of mains with 4 nos. of 16 sq mm Cu. PVC insulated FRLS flexible wire with ISI approval for 650 V/ 1100 V and 2 nos 6 sqmm Cu. PVC insulated flexible wires with ISI approval for 650 V/ 1100 V as earth wires to be drawn in 40 mm diameter rigid PVC conduit of medium guage having ISI and FIA and with complete in all respect as directed by engineer in charge and Higher Authority. - For UPS I/P & O/P (4 x one Wire 16 sqmm / 2 x oneWire 6sqmm / 1 x 40 mm pvc pipe )
SITC of mains with 4 nos. of 4 sq mm Cu. PVC insulated FRLS flexible wire with ISI approval for 650 V/ 1100 V and 1 nos 2.5 sqmm Cu. PVC insulated flexible wires with ISI approval for 650 V/ 1100 V as earth wires to be drawn in 25 mm diameter rigid PVC conduit of medium guage having ISI and FIA and with complete in all respect as directed by engineer in charge and Higher Authority. - 3 phase socket. (4 x one Wire 4 sqmm / 1 x oneWire 2.5sqmm / 1 x 25 mm pvc pipe)
SITC of mains with 4 nos. of 6 sq mm Cu. PVC insulated FRLS flexible wire with ISI approval for 650 V/ 1100 V and 2 nos 2.5 sqmm Cu. PVC insulated flexible wires with ISI approval for 650 V/ 1100 V as earth wires to be drawn in 25 mm diameter rigid PVC conduit of medium guage having ISI and FIA and with complete in all respect as directed by engineer in charge and Higher Authority. - 3 phase socket (4 x one Wire 6 sqmm / 2 x oneWire 2.5sqmm / 1 x 25 mm pvc pipe)
SITC of mains with 2 nos. of 4 sq mm Cu. PVC insulated FRLS flexible wire with ISI approval for 650 V/ 1100 V and 1 no 2.5 sqmm Cu. PVC insulated flexible wires with ISI approval for 650 V/ 1100 V as earth wires to be drawn in 25 mm diameter rigid PVC conduit of medium guage having ISI amd FIA and with complete in all respect as directed by engineer in charge and Higher Authority. - rooms mains / 1 phase socket ( 2 x one Wire 4 sqmm / 1 x oneWire 2.5sqmm / 1 x 25 mm pvc pipe)
SITC of mains with 2 nos. of 6 sq mm Cu. PVC insulated FRLS flexible wire with ISI approval for 650 V/ 1100 V and 1 no 4.0 sqmm Cu. PVC insulated flexible wires with ISI approval for 650 V/ 1100 V as earth wires to be drawn in 25 mm diameter rigid PVC conduit of medium guage having ISI amd FIA and with complete in all respect as directed by engineer in charge and Higher Authority. - Suite room mains ( 2 x one Wire 6 sqmm / 1 x oneWire 4 sqmm / 1 x 25 mm pvc pipe )
SITC of mains with 2 nos. of 10 sq mm Cu. PVC insulated FRLS flexible wire with ISI approval for 650 V/ 1100 V and 1 nos 6.0 sqmm Cu. PVC insulated flexible wires with ISI approval for 650 V/ 1100 V as earth wires to be drawn in 25 mm diameter rigid PVC conduit of medium guage having ISI and FIA and with complete in all respect as directed by engineer in charge and Higher Authority.( 2 x one Wire 10 sqmm / 1 x oneWire 6 sqmm / 1 x 50 mm pvc pipe)
SITC of mains with 2 nos. of 2.5 sq mm Cu. PVC insulated FRLS flexible wire with ISI approval for 650 V/ 1100 V and 1 no 2.5 sqmm Cu. PVC insulated flexible wires with ISI approval for 650 V/ 1100 V as earth wires to be drawn in 25 mm diameter rigid PVC conduit of medium guage having ISI amd FIA and with complete in all respect as directed by engineer in charge and Higher Authority. ( 2 x one Wire 2.5sqmm / 1 x oneWire 2.5sqmm / 1 x 25 mm pvc pipe)
SITC of mains with 2 nos. of 1.5 sq mm Cu. PVC insulated FRLS flexible wire with ISI approval for 650 V/ 1100 V and 1 no 1.5 sqmm Cu. PVC insulated flexible wires with ISI approval for 650 V/ 1100 V as earth wires to be drawn in 25 mm diameter rigid PVC conduit of medium guage having ISI amd FIA and with complete in all respect as directed by engineer in charge and Higher Authority. - VRV IDU ( 2 x one Wire 1.5sqmm / 1 x oneWire 1.5sqmm / 1 x 25 mm pvc pipe)
Supplying , fabricating and installation of various sizes junction boxes made out to 14 gauge sheet with all necessary accessories & hardware etc All the necessary fabrication required will be included in the scope of contractor. Scope also includes two coat of primer and two coat of paining of each items on all the sides and with complete in all respect as directed by engineer in charge and Higher Authority.
SITC of of 3 compatement 225 mm x 38 mm, 1.6mm thick, under floor metal trunking/race way with all accessories made out of hot dip pre galvanized metal coated steel sheet.
SITC of of 1 compartement 100 mm x 38 mm, 1.6 mm thick, under floor metal trunking/race way with all accessories made out of hot dip pre galvanized metal coated steel sheet.
SITC of 3 compartment Access outlet / service box of 250 x 250 x 60-75 mm with all accessories made out of high pressure die cast material suitable for above race ways .
SITC of 2 compatement 100 mm x 50 mm wall trunking/race way with cover and all accessories made out of PVC .
ELW 15.00 : Light Fixtures and Fans Supplying and erecting, testing and commissioning of Recessed Mounted Direct Light 10 Watt Spot AG IP 20 3000K, Die Cast Aluminium , PMMA CLEAR Lens , CRI 90 , including Driver / 700 MA CREE COB LED , Efficacy System IM/ watt - 70 , Beam Angle : 22 / 24 / 33 , DIA 75mm - H : 90 MM - C : 69mm and with complete in all respect as directed by engineer in charge and Higher Authority. MAKE : ABBY,Nirvana, Philips, Wipro.
Supplying and erecting, testing and commissioning of Recessed Mounted Direct Light 10 Watt Spot AG IP 54 3000K, Die Cast Aluminium , PMMA CLEAR Lens , CRI 90 , including Driver THD<10% / 700 MA CREE COB LED , Efficacy System IM/ watt - 70 , Beam Angle : 22 / 24 / 33 , DIA 100mm - H : 75 MM - C : 90mm and with complete in all respect as directed by engineer in charge and Higher Authority. MAKE : ABBY,Nirvana, Philips, Wipro.
Supplying and erecting, testing and commissioning of Recessed Mounted Direct Light 10 Watt adjustable Spot AG IP 20 3000K, Die Cast Aluminium , PMMA CLEAR Lens , CRI 90 , including Driver / 700 MA CREE COB LED , Efficacy System IM/ watt - 70 , Beam Angle : 22 / 24 / 33 , DIA 90mm - H : 51 MM - C : 83mm and with complete in all respect as directed by engineer in charge and Higher Authority. MAKE : ABBY,Nirvana, Philips, Wipro.
Supplying and erecting, testing and commissioning of Recessed Mounted Direct Light 12 Watt deep led Spot AG IP 20 3000K, Die Cast Aluminium , PMMA CLEAR Lens , CRI 90 , including Driver/ 700 MA CREE COB LED , Efficacy System IM/ watt - 70 , Beam Angle : 22 / 24 / 33 , DIA 78mm - H : 86 MM - C : 72mm and with complete in all respect as directed by engineer in charge and Higher Authority. MAKE : ABBY,Nirvana, Philips, Wipro.
Supplying and erecting, testing and commissioning of Recessed Mounted Direct Light 15 Watt led Spot AG IP 54 3000K, Die Cast Aluminium , PMMA CLEAR Lens , CRI 90 , including Driver / 700 MA CREE COB LED , Efficacy System IM/ watt - 70 , Beam Angle : 22 / 24 / 33 , DIA 100mm - H : 75 MM - C : 90mm and with complete in all respect as directed by engineer in charge and Higher Authority. MAKE : ABBY,Nirvana, Philips, Wipro.
Supplying and erecting, testing and commissioning of Recessed Mounted Direct Light 06 Watt led Spot AG IP 20 3000K, Die Cast Aluminium , PMMA CLEAR Lens , CRI 90 , including Driver / 700 MA CREE COB LED , Efficacy System IM/ watt - 70 , Beam Angle : 22 / 24 / 33 , DIA 60mm - H : 84 MM - C : 52mm and with complete in all respect as directed by engineer in charge and Higher Authority. MAKE : ABBY,Nirvana, Philips, Wipro.
Supplying and erecting, testing and commissioning of Surface Mounted 08 Watt led Down light AG IP 20 3000K, Die Cast Aluminium , PMMA CLEAR Lens , CRI 90 , including Driver / 700 MA CREE COB LED , Efficacy System IM/ watt - 70 , Beam Angle : 22 / 24 / 33 , DIA 60mm - H : 112 MM and with complete in all respect as directed by engineer in charge and Higher Authority. MAKE : ABBY,Nirvana, Philips, Wipro.
Supplying and erecting, testing and commissioning of Recessed Mounted Direct Light 36 Watt led Spot AG IP 20 3000K, Die Cast Aluminium , PMMA CLEAR Lens , CRI 90 , including Driver / 700 MA CREE COB LED , Efficacy System IM/ watt - 70 , Beam Angle : 22 / 24 / 33 , DIA 150 mm - H : 160 MM - C : 125mm and with complete in all respect as directed by engineer in charge and Higher Authority. MAKE : ABBY,Nirvana, Philips, Wipro.
Supplying and erecting, testing and commissioning of Surface Mounted 08 Watt led Down light AG IP 65 3000K, Die Cast Aluminium , PMMA CLEAR Lens , CRI 90 , including Driver / 700 MA CREE COB LED , Efficacy System IM/ watt - 70 , Beam Angle : 22 / 24 / 33 , DIA 60mm - H : 120 MM and with complete in all respect as directed by engineer in charge and Higher Authority. MAKE : ABBY,Nirvana, Philips, Wipro.
Supplying and erecting, testing and commissioning of Recessed Mounted Direct Light 20 Watt led Spot AG IP 54 3000K, Die Cast Aluminium , PMMA CLEAR Lens , CRI 90 , including Driver / 700 MA CREE COB LED , Efficacy System IM/ watt - 70 , Beam Angle : 22 / 24 / 33 , DIA 140 mm - H : 90 MM - C : 130mm and with complete in all respect as directed by engineer in charge and Higher Authority. MAKE : ABBY,Nirvana, Philips, Wipro.
Supplying and erecting, testing and commissioning of Surface Mounted down Light 15 Watt led Spot AG IP 65 3000K, Die Cast Aluminium , PMMA CLEAR Lens , CRI 90 , including Driver / 700 MA CREE COB LED , Efficacy System IM/ watt - 70 , Beam Angle : 22 / 24 / 33 , DIA 82 mm - H : 162 MM and with complete in all respect as directed by engineer in charge and Higher Authority. MAKE : ABBY,Nirvana, Philips, Wipro.
Supplying and erecting, testing and commissioning of Recessed Mounted 6 Watt LED FOOT MARKER, IP 65 3000K, Die Cast Aluminium , PMMA CLEAR Lens , CRI 90 , including Driver / 700 MA CREE COB LED , Efficacy System IM/ watt - 70 , Beam Angle : 22 / 24 / 33 and with complete in all respect as directed by engineer in charge and Higher Authority. MAKE : ABBY,Nirvana, Philips, Wipro.
20W LED TUBE LIGHT - IP20 MAKE : ABBY, Nirvana, Phillps, Wipro.
20W LED TUBE LIGHT - IP44 OR 65 MAKE : ABBY, Nirvana, Phillps, Wipro.
Supply Instollation of Light Pole with posttop Fixture Supplying and erecting, testing and commissioning of 3.0 Mtr long, 90 mm outer dia light pole with 36W LED posttop light fixture etc,. Make - K-LITE , Kesslec or as per apporved by Architect. (89mmdia & 3000MM Pole)
Supply Instollation of 16W LED Bollards Supplying and erecting, testing and commissioning of 0.6 Mtr long, 75mm outer uniform dia and top ring will be 166mm dia. MS Hotdip GI light pole with 16W LED light fixture etc,. including Driver 9VDC THD<10% Make - K-LITE , Kesslec or as per apporved by Architect.
12W / mtr led strip IP20 indoor with profile 16x12 with driver (for 10mtr) including Driver THD<10% MAKE : ABBY, Nirvana, Phillps, Wipro.
12W / mtr led strip IP66 outdoor with profile 16x18 with driver (for 10mtr) including Driver THD<10% MAKE : ABBY, Nirvana, Phillps, Wipro.
20W / mtr led strip IP20 indoor with profile 16x18 with driver (for 10mtr) including Driver THD<10% MAKE : ABBY, Nirvana, Phillps, Wipro.
24W / mtr led strip IP20 indoor with profile 16x18 with driver (for 10mtr) including Driver THD<10% MAKE : ABBY, Nirvana, Phillps, Wipro.
24W / mtr led strip IP65 outdoor with profile 16x18 with driver (for 10mtr) including Driver THD<10% MAKE : ABBY, Nirvana, Phillps, Wipro.
Supplying and erecting, testing and commissioning of 13W LED Surface mounted spotlight. IP65. 15ᵒ beam angle. Extruded, aluminium body. With IP67 connector. Body color:SILVER GREY. including Driver 9VDC THD<10%Dimensions:Ø82X190mm. Make - K-LITE , Kesslec or as per apporved by Architect.
Supplying and erecting, testing and commissioning of 8W LED Inground light fixture. IP67. IK10. 20ᵒ beam angle. 20ᵒ titalble. SS 316 top ring. Die cast aluminium body. 8mm step temepred glass. IP67 PG 11 cable gland. including Driver 9VDC THD<10%, Integral power supply. Dimensions:(Ø55)X86mm. Make - K-LITE , Kesslec or as per apporved by Architect.
SITC of Approved make Ceiling fan with double ball bearing ISI mark with condenser A.C. 230 V. 50 Cys. 900 mm. sweep complete, canopy and 30 cms. down rod erected on existing hook or clamp with 24/0.2, 3 core flexible wire with earthing
SITC of Approved make Ceiling fan with double ball bearing ISI mark with condenser A.C. 230 V. 50 Cys. 1200 mm. sweep complete, canopy and 30 cms. down rod erected on existing hook or clamp with 24/0.2, 3 core flexible wire with earthing
Supplying and erecting, testing and commissioning of exhaust fan to crompton make Cross Air Fan 10” DIA with self opening louvers.
Indoor integrated 36W LED IP65 Wall Washer beam angle 20ᵒx50ᵒ ,CRI>90, MacAdam<3sdcm, CCT-3000, IK-10, D :1000 mm - H : 85 MM - C : 43mm(Extended Aluminium with Toughened glass silicon gasket seals mounting-surface mounting) Finish : grey Make - K-LITE , Kesslec or as per apporved by Architect.
Outdoor integrated 24W LED IP65 Wall Washer beam angle 20ᵒx50ᵒ ,CRI>90, MacAdam<3sdcm, CCT-3000, IK-10, D :1000 mm - H : 85 MM - C : 43mm(Extended Aluminium with Toughened glass silicon gasket seals mounting-surface mounting) Finish : grey Make - K-LITE , Kesslec or as per apporved by Architect.
Supplying and erecting, testing and commissioning of 12W LED Bulkhead type Light Fixture-IP65 Make - K-LITE , Kesslec or as per apporved by Architect.
Supplying and erecting, testing and commissioning of Decorative Hanging Light with 12W LED lamp - For In Sute rooms Living room - HL-1 Make - K-LITE , Kesslec or as per apporved by Architect.
Supplying and erecting, testing and commissioning of Decorative Hanging Light with 12W LED lamp -Suite room Bed side - HL-2 Make - K-LITE , Kesslec or as per apporved by Architect.
Supplying and erecting, testing and commissioning of Decorative Hanging Light with LED lamp - Ground floor Restaurant area - HL-3 Make - K-LITE , Kesslec or as per apporved by Architect.
Supplying and erecting, testing and commissioning of Decorative Hanging Light with LED lamp - Ground floor Banquet hall area - HL-4 (2.7 x 2.0 mtr x 1.5mtr (height) Make - K-LITE , Kesslec or as per apporved by Architect.
Supplying and erecting, testing and commissioning of Decorative Hanging Light with LED lamp - Ground floor Banquet hall Prefunction area - HL-5 (2.7 x 2.0 mtr x 1.5mtr (height) Make - K-LITE , Kesslec or as per apporved by Architect.
Supplying and erecting, testing and commissioning of Decorative Hanging Light with LED lamp - 2nd floor Banquet hall area - HL-6 (2.4 x 1.8 mtr x 1.5mtr (height) Make - K-LITE , Kesslec or as per apporved by Architect.
Supplying and erecting, testing and commissioning of Decorative Hanging Light with LED lamp - 2nd floor Banquet hall Prefunction area - HL-7 (5.0 x 2.0 mtr x 1.5mtr (height) Make - K-LITE , Kesslec or as per apporved by Architect.
Supplying and erecting, testing and commissioning of Decorative wall bracket Light with LED lamp -All Guest room bedside - BL-3 Make - K-LITE , Kesslec or as per apporved by Architect.
Supplying and erecting, testing and commissioning of Decorative Floor Lamp with foot switch with LED lamp - Guest room Floor Lamp Make - K-LITE , Kesslec or as per apporved by Architect.
Supplying and erecting, testing and commissioning of Decorative Table Lamp with inbuilt switch with LED lamp - Guest room table Lamp Make - K-LITE , Kesslec or as per apporved by Architect.
Supplying and erecting, testing and commissioning of Skirting light with LED lamp - Guest room - NL1 MAKE : ABBY, Nirvana, Phillps, Wipro.
Supplying and erecting, testing and commissioning of 4.53mtr - 36W / mtr LED surface mounted muilti LED Flexible strip light with 35 x 35mm size aluminium extrudesd housing and dot less diffuser, CRI>90 macdm < 3 sdcm, CCT 3000K, IK10 Fixture should be complete with required including Driver, driver should be THD<10%. Make - Abby , Nirvana or As per sample apporved by Architect.
Supplying and erecting, testing and commissioning of 1.75mtr - 36W / mtr LED surface mounted muilti LED Flexible strip light with 35 x 35mm size aluminium extrudesd housing and dot less diffuser, CRI>90 macdm < 3 sdcm, CCT 3000K, IK10 Fixture should be complete with required including Driver, driver should be THD<10%. Make - Abby , Nirvana or As per sample apporved by Architect.
ELW 16.00 Earthing Supplying, installing, testing & commissioning of Maintenance Free Chemical Earthing System consisting of (A) Copper Bonded Earth Rod of 3 Mtr x 5/8" size using earth enhancing compound of 25 Kg & termination clamp. and with complete in all respect as directed by engineer in charge and Higher Authority.
Earth wire/strips : Supply and laying GI. earthing required size strips for interconnecting the earthing stations, panels, DB's etc. in built up trenches, on walls/ceiling, buried in ground generally as specified and shown on drawings complete with : a) Fixing accessories. b) Corrosion protection of buried conductors with bituminous coating and covered with PVC tapes. 25 x 3 mm/ 26 X 6 mm / 50 x 6 mm GI. strip required size of earth link
Earth wire/strips : Supply and laying cu. earthing required size strips for interconnecting the earthing stations, panels, DB's etc. in built up trenches, on walls/ceiling, buried in ground generally as specified and shown on drawings complete with : a) Fixing accessories. b) Corrosion protection of buried conductors with bituminous coating and covered with PVC tapes. 25 x 3 mm/ 32X6mm / 50x6mm CU. strip/ 38x6 Cu earth link
SITC of No.8 gauge bare cu. earth wire Complete in all respect with all reuqired accessories.
SITC of No.8 gauge bare GI. earth wire Complete in all respect with all reuqired accessories and with complete in all respect as directed by engineer in charge and Higher Authority.
ELW 18.00 Miscellaneous MISCELLANEOUS PVC PIPES Supplying and laying following sizes PVC pipe of approved make including excavation of trenches, laying the pipe as per layout and drawing and re-filling the trenches etc. complete as directed. Heavy gauge pipe in Open / Concealed manner minimum 25 mm dia with GI pulling wire.
Supplying and laying following sizes PVC pipe of approved make including excavation of trenches, laying the pipe as per layout and drawing and re-filling the trenches etc.and with complete in all respect as directed by engineer in charge and Higher Authority. Heavy gauge pipe in Open / Concealed manner minimum 32 mm dia with GI pulling wire.
Supplying and laying following sizes PVC pipe of approved make including excavation of trenches, laying the pipe as per layout and drawing and re-filling the trenches etc.and with complete in all respect as directed by engineer in charge and Higher Authority. Heavy gauge pipe in Open / Concealed manner minimum 40 mm dia.
Supplying and laying following sizes PVC pipe of approved make including excavation of trenches, laying the pipe as per layout and drawing and re-filling the trenches etc.and with complete in all respect as directed by engineer in charge and Higher Authority. Heavy gauge pipe in Open / Concealed manner minimum 50 mm dia.
Supplying and laying following sizes PVC pipe of approved make including excavation of trenches, laying the pipe as per layout and drawing and re-filling the trenches etc.and with complete in all respect as directed by engineer in charge and Higher Authority. Heavy gauge pipe in Open / Concealed manner minimum 75 mm dia.
Supplying and laying following sizes PVC pipe of approved make including excavation of trenches, laying the pipe as per layout and drawing and re-filling the trenches etc. and with complete in all respect as directed by engineer in charge and Higher Authority. Heavy gauge pipe in Open / Concealed manner minimum 90 mm dia.
Supplying and laying following sizes PVC pipe of approved make including excavation of trenches, laying the pipe as per layout and drawing and re-filling the trenches etc. and with complete in all respect as directed by engineer in charge and Higher Authority. Heavy gauge pipe in Open / Concealed manner minimum 110 mm dia.
Providing & laying. R.C.C. Hume pipe for cable to be laid 90 cms. below ground across the road crossing or on floor with necessary material in an approved manner and making the ground as per original and with complete in all respect as directed by engineer in charge and Higher Authority. (A) 250 mm dia
Providing & laying approved make Double walled corrugated pipes (DWC) of polyethylene(conforming to IS 14930 II )with necessary connecting accessories of same material at required depth for laying of cable. below ground / road surface for enclosing cable and back filling the same to make ground as per original and with complete in all respect as directed by engineer in charge and Higher Authority. (C)120 mm dia.
Fire Stopper SITC of Fire stop mortar system , with minimum 2 hours fire rating when tested in accordance with UL 1479/ASTM-E 814 standards, for horizontal openings in floors or slabs after passing service lines like cables/cable bundles, cable trays etc. The system shall be UL listed & classified and product shall bear the UL and FM approval logo on the packing. If none of UL test certificate comply with actual application, an EJ document (as per IFC Guidelines) prepared by a qualified personnel and based on nearest third party tested & approved systems like UL test certificates & in accordance with IFC guidelines shall be producted by manufacturer. A firestop submittal shall be produced by manufacturer , in accordance with approved passive fire protection method statement, for technical approval. Firestop installation shall be done by manufacturer's Accredited Firestop Speciality Contractor (HAFSC) and in accordance with manufacturer guidelines and UL system test certificates or approved EJ document. .
SITC of Provide expanding firestop foam on both sides of wall, with minimum 2 hours fire rating when tested in accordance with UL 1479/ASTM-E 814, for horizontal/ vertical openings in floors / wall or slabs made of concrete/ masonry or Gypsum after passing service lines like cable trays or cables/cable bundlesThe system shall be UL listed & classified and product shall bear the UL and FM approval logo on the packing. The system shall be UL listed & classified and product shall bear the UL & FM approval logo on the packing. If none of UL test certificate comply with actual application, an EJ document (as per IFC Guidelines) prepared by a qualified personnel and based on nearest third party tested & approved systems like UL test certificates & in accordance with IFC guidelines shall be producted by manufacturer.Firestop installation shall be done by manufacturer's Accredited Firestop Speciality Contractor (HAFSC) and in accordance with manufacturer's guidelines and UL system test certificates or approved EJ document.
SITC of intumescent based coating on cables/bunch cables & cable tray for at least 1 mtr in every 14 mtrs for horizontal runs and to entire length of vertical runs . The coating shall have a density in the range of 1.2 to 1.4 Kg/ L. The coating shall be non-toxic, asbestos and halogen free and shall have good mechanical strength. Firestop installation shall be done by manufacturer's Accredited Firestop Speciality Contractor (HAFSC) and in accordance with manufacturer's guidelines .
Down Conductor SystemSupply, Installation, Testing & Commissioning of 10 mm copper bonded Round steel solid Conductor for Down conductor meet the requirements of IS/ IEC 62305 and IEC 62561-2 with Bonding clamp/Rebar Hook for interconnecting 10mm-18mm round conductor and stainless steel straight connector at every 3.5M. Make - K-lite, Kesslec or approved by Architect.
Supply of non corossive 10 mm dia Copper bonded round conductor used for Earth termination in the soil and it is tested for Short circuit test ,Electrical resisitivity, Tensile strength .Conductor holder is fixed on the Side wall of the building.All the Lightning Protection components are tested as per IEC 62561-1& 2. Make - K-lite, Kesslec or approved by Architect.
Supply of UL listed Copper bonded rod of 254 microns coating thickness and 3.048 mtr length can be used as Earthing .The diametre of the rod shall be 14.2mm. Universal clamp of required size should be made up of stainless steel. Earth enhancement compund of 25kg producing low resistance below 1 Ω mtr of an earth termination system. Material of the earthing enhancing compound shall be chemically inert to subsoil. It shall not pollute the environment.The compound shall be tested and certified as per IEC 62561-7 .Earth Chamber Should have an outer dimension of 300 mmX 300 mm X 190 mm made of PP material . Flush Mounted, removable and lockable cover of the earth pit should be able to withstand 50kN. Lightning Protection components are tested as per IEC 62561-1& 2.
ELW 21.00 UPS Supply, Installation, Testing & Commissioning of ON LINE UPS system with 30 mins battery backup and with battery rack and with complete in all respect as directed by engineer in charge and Higher Authority. 20KVA UPS 3 ph in 3 ph out for balance load
ELW 22.00 Exit sign SITC of Self contained single sided exit sign for wall / ceiling / pendant cantilever mounting with 3 W LED tube for Non maintained battery backup emergency lighting for 2 hours duration.Prolite make or approved equal in quality and design by Architect.
SITC of Self contained double sided exit sign for wall / ceiling / pendant cantilever mounting with 3 watt LED tube, Non maintained battery backup 2 hours duration Prolite make or approved equal in quality and design by Architect.
4.00 ELV SYSTEMS Sec.1.0 Telephone and Data Networking Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size complete to be erected on/in wall or ceiling erected with necessary PVC fittings & Junction boxes fixed with adhesive solution & Clamps with following dia of pipes, in approved manner as directed. 25 mm
Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size complete to be erected on/in wall or ceiling erected with necessary PVC fittings & Junction boxes fixed with adhesive solution & Clamps with following dia of pipes, in approved manner as directed. 40 mm
Tag Blocks - Multipair Telephone Cable Termination Supply & fixing of 20 pair MDF unit with required modules in a fabricated CRCA powder coated junction box of size 250x250x100 with two no. of pad-lock, provision for earthing.
Supply & fixing of 50 pair MDF unit with required modules in a fabricated CRCA powder coated junction box of size 450x250x100 with two no. of pad-lock, provision for earthing.
Cabling - Multipair Cables Supplying & erecting approved make Telephone Cable electrolytic copper conductor PE insulation twisted in two pairs & wrapped with FR PVC tape & sheathed with FR PVC or HFFR outer jacket suitable for telephone wiring & confirming to C-DOT erected in existing pipe. of following size of conductors & nos. of pairs. With necessary connections. A Conductor Size 0.5 mm. (b) Armoured. (Jelly Filled) (3) 20 Pairs.
Cabling - Multipair Cables Supplying & erecting approved make Telephone Cable electrolytic copper conductor PE insulation twisted in two pairs & wrapped with FR PVC tape & sheathed with FR PVC or HFFR outer jacket suitable for telephone wiring & confirming to C-DOT erected in existing pipe. of following size of conductors & nos. of pairs. With necessary connections. A Conductor Size 0.5 mm. (b) Armoured. (Jelly Filled) (3) 50 Pairs.
Supplying & erecting approved make Telephone Cable electrolytic copper conductor PE insulation twisted in two pairs & wrapped with FR PVC tape & sheathed with FR PVC or HFFR outer jacket suitable for telephone wiring & confirming to C-DOT erected in existing pipe. of following size of conductors & nos. of pairs. With necessary connections. A Conductor Size 0.5 mm. (b) Armoured. (Jelly Filled) (4) 100 Pairs.
Telephone / Data Networking Cabling Supplying & erecting approved make LAN cable of following size in existing pipe as per direction. [C] CAT - 6 Shielded
Providing following type of Modular Type Accessories mounted with pvc / metallic box covered with appropriate front plate modules erected with necessary connection. As desired by Engineer In charge. (8) Modem Jack for Computer Open RJ-45. Cat. III.
Supplying, installation, testing and commissioning of UTP CAT6 24 ports capacity gigaspeed patch panel, all ports loaded with individual RJ-45 IOs. as per technical specification etc. as required.
Supplying, installation, testing and commissioning of UTP CAT6 RJ45 ethernet patch cord - 7 feet as per technical specification etc. as required.
Supplying, installation, testing and commissioning of UTP CAT6 RJ45 ethernet patch cord - 3 feet as per technical specification etc. as required.
Data Networking - Fiber Optic Cable and Components Supplying, installation, testing and commissioning of outdoor 6 core armoured single mode fiber optic cable for outdoor connectivity where ever required in prelaid conduits / RCC hume pipes/HDPE/DWC, whichever maybe available etc. as per technical specification etc. as required.
Supplying, installation, testing and commissioning of 19" rack mounting type fiber shelf for assembly/termination of minimum 6 cores of singlemode ofc cable for LC style components, for optical splicing and provision for storage of pigtails and splices, equipped with adaptors, adaptor plates and any other such all necessary hardware for proper dressing and management of fiber optic cable etc. as required. Any blank adaptor positions must be suitably masked for restricting dust entry etc. as per technical specification etc. as required.
Supplying, Splicing , testing and commissioning of LC type single mode pre-terminated pigtail 1mtr as per tender specification etc. as per technical specification etc. as required.
Supplying, Installation, testing and commissioning of LC-LC single mode duplex fiber optic patch cord 1mtr. as per technical specification etc. as required.
Supplying and making cable route marker with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) of size 60 cm X 60 cm at the bottom and 50 cm X 50 cm at the top with a thickness of 10cm including inscription duly engraved as required. for OFC Marker, as per technical specification etc. as required.
Supplying, installation, testing and commissioning of Networking enclosure - wall mounted, 19" mounting frame, usable height 9U, 600mmW x 600mmD etc. as per technical specification etc. as required.
Supplying, installation, testing and commissioning of Networking enclosure -Floor / wall mounted, 19" mounting frame, usable height 15U, 600mmW x 600mmD etc. as per technical specification etc. as required.
Supplying, installation, testing and commissioning of 42U Floor standing 19" networking enclosure as per specification and complete with all accessories. (upto size - 800mmW x 1000mmD) as required. (along with horizontal cable manager & vertical cable manager, PDU with minimum 12 Nos. 16 Amp socket, as per technical specification etc. as required.
Supply, Installation, Testing & Commissioning of Fully Layer 3 networking switch, 16# 10/100/1000 1G ports, 4 SFP+ Module , suitable for single mode fiber optics based ring topology configuration, supporting transceivers upto 2000mtrs. Make : Cisco, HPE-Aruba
Supply, Installation, Testing & Commissioning of Layer 2 networking switch, 24# 10/100/1000 BT ports, 24 ports providing PoE+ as per 802.3a/f each delivering minimum 15Watts per port, min. 4 shared mini-GBIC/SFP ports suitable for single mode fiber optics based ring topology configuration, supporting transceivers upto 2000mtrs. Make : Cisco, HPE-Aruba
Supply, Installation, Testing & Commissioning of Layer 2 networking switch, 24# 10/100/1000 BT ports, 24 ports NON PoE. Make : Cisco, HPE-Aruba
Supplying, installation, testing and commissioning of 1G SFP Single mode transceiver, 1310nm, 2Km, LC connector, inclusive of any hardware such as modules for populating SM-LC transceivers as per technical specification etc. as required.
Supply, Installation, Testing and Commissioning of Wireless indoor Access Point supporting Dual band with 802.11a/n/ac (5 GHz) and 802.11g/n (2.4GHz) concurrent operation with MIMO support , 3 spatial streams, One 10/100/1000 BASE-TX auto-sensing (RJ45) PoE port, as per technical specification etc. as required.
Supply, Installation, Testing and Commissioning of Wireless Access Point supporting Dual band with 802.11a/n/ac (5 GHz) and 802.11g/n (2.4GHz) concurrent operation with MIMO support 4x4:3 spatial streams, One 10/100/1000 BASE-TX auto-sensing (RJ45) PoE port, as per technical specification etc. as required.
Supply, Installation, Testing & Commissioning of 150 users Firewall, VPN, ISP Load Balancing & Failover, Bandwidth Management & QoS, Authentication, AD Integration, User Management, Gateway Anti Virus, Anti Malware, Web & URL Filtering, Application Control, IDS, IPS, DDos Protection, Botnet Filtering, DPI SSL (Encrypted Traffic Inspection for Threats), Sand boxing for Unknown Threat Protection, Ransomware Protection, 24 X 7
Supply, Installation, Testing and Commissioning of Communication/EPABX/ Gateway Systems .The system should be based on Server - Gateway Architecture with redundancy of Server. The connection from Server to Gateway shall be on IP and/or E1 with auto switch over, EPABX shall work with the servers in Active- Active mode which means if Primary Server fails the secondary server takes over and with same class of service and programming (As per Technical Specification) Configuration for EPABX and Gateway: - 02 PRI Card - 16 Trunks/Co Lines - 8 Digital Card - 4 Ports Inbuilt GSM Card - 4 Ports Inbuit CNR card - 50 IP Extensions - 5 SIP Trunking - 192 Analog extensions; Expandable Upto 512 Ports - 25A/48V DC Float cum boost charge with 4 hour back-up
Supply, Installation, Testing and Commissioning of User Call Control Application for all users/extensions, Voice Messaging Application inclusive of voice mail licences for users and inclusive of computer application and operating system, Emergency response services with voice messaging, inclusive of licences as per technical Specification.
“Supplying & erecting push button type telephone instrument having speaker phone Caller ID & hands free dialing system “(a) Single line BPL/SONY/BEETEL
Supply, Installation,Testing and Commissioning of Digital Telephone with DSS console and related software/ licences as per tender specification etc. as required.
Sec.2.0 Video Survelance/CCTV System Supply, Installation, Testing & Commissioning of Vandal reistant True Day Night Veri-Focal Dome Camera 2MP, Full HD, 1/2.8 type CMOS image sensor, 2.8 -12mm motorized focus lens, Aperture Ratio F1.8, Wide Dynamic Range - 120dB, H.265 / H.264 & MJPEG dual-stream encoding, 25/30fps@1080P (1920 ×1080), IR LEDs length minimum 20 m, Motion Detection , Tampering ,Defocus detection , Hallway view ,Micro SD Card - 128GB capacity, IP66 rated, IK 10 and as per technical Specification ,The Camera must be UL Listed. as per technical specification etc. as required.
Supply, Installation, Testing & Commissioning of True Day Night Bullet Camera 2MP, Full HD, 1/2.8 type CMOS image sensor, Autoiris Varifocal lens 2.8 - 12mm motorized focus lens , Aperture Ratio F1.4, Wide Dynamic Range - 120dB, H.265 / H.264 & MJPEG dual-stream encoding, 25/30fps@1080P (1920 ×1080), IR LEDs length minimum 30 m, Motion Detection , Tampering ,Defocus detection , Hallway View, Micro SD Card - 128GB capacity, IP66 rated, IK 10 as per technical specification The Camera must be UL Listed, as per technical specification etc. as required.
Supply, Installation, Testing & Commissioning of Vandal Resistant PTZ Network Cameras ,IR with 350 Mtrs Viewing Distance 30 X Optical Zoom,camera with 1/1.9" sensor, 2MP, Full HD(1080p) @60fps WDR off or @15fps WDR on, H.265/H.264/MJPEG, 120dB WDR, Auto Tracking, true D/N, ,Edge Analytics - Auto Tracking, Virtual Perimeter, Entry/Exit Detection, Tampering,SD/SDHC/SDXC memory slot, 24VAC, IP66, IK10 .including all mounting accessories.The Camera must be UL Listed, as per technical specification etc. as required.
Supply Installation Testing & Commissioning of Network Storage Management software (NSM) supporting ONVIF Profile S , PSIA, real time streaming protocol (RTSP) standards, 4K resolution, H.265 video compression codec, 3D PTZ control, and intelligence events. System proposed shall have 128 cameras per NSM with sufficient licenses to record all the cameras in this requirement. NSM shall support simultaneous recording, live monitoring, playback/search of recorded video for up to 4K resolution on all cameras, taking snapshots and viewing presets for PTZ cameras and system management. Smart Motion detection, Role-based operator privileges supporting Windows and local users, Video Archiving, Multi-stream support, Advanced security features with encryption support for communication between desktop client to NSM and secure https login for Web Client and Mobile apps . NSM Shall support scheduled backfilling of the recordings from the edge storage/SD card of cameras to the NSM using ONVIF Profile G for robust recording against temporary network failure, N+1/N+M recorder failover and failback automatically or manually to have maximum system uptime and recording continuity complete with hardware as per specification. as per technical specification etc. as required.
Supply, Installation, Testing and Commissioning of 64 Channel NVR With 1080p Realtime Live View H.265/H.264 MJPEG dual codec decoding Up to 12 MP resolution preview & playback Max 320 Mbps incoming bandwidth support 8 SATA HDDs up to 64TB, Supports fisheye videode-warping in local and web user interface,Supports visual or auditory notifications(a flashing light, bell,or siren). ONVIF compliant, UL, CE, FCC and & RoHS compliant.
Supplying, installation, testing and commissioning of Client PC - Industry standard Intel based platform computer system. Intel Core i7 latest generation, 4 GB of RAM DDR3 ,1 TB SATA II hard drive for OS and VMS applications, NVidia card 1 GB graphics card , 1600 x 1200 or higher screen resolution, 1 X 1000Mbps ethernet network interface card ,16x DVD+/- RW Drive alongwith appropriate licenced Operating System, licenced applications suites from OEM and application licences as per the technical specifications etc. as required.
Supplying, installation, testing and commissioning of Network storage required with a capacity to store the content for 125 cameras for 24Hrs x 30 days at 25fps and 1080p (Minimum 70TB from day 1). It should be scalable (should have sufficient expansion bays for HDDs) for at least additional 15 cameras. Vendor shall submit bandwidth and storage calculator for the proposed camera models as per technical specification etc. as required.
Supply, Installation, Testing and Commissioning of Network Keyboard, 7" TFT touch screen, up to 256 units of DVR/Network Cameras/Speed Dome management, 1-ch HD 1080p video steam decoding, USB 2.0 interface for video backup
Supply installation testing and commissioning of 55" Full HD LED Video wall display, 3.5 mm bezel to bezel, 500 Cd/m2 brightness, DVI-D Loop out-Daisy chain, DVI- D IN X 1, VGA X 1, HDMI X 2, DVI-I Out x 1, LAN, with required mounting bracket as per site requirement. as per technical specification etc. as required.
Supply installation testing and commissioning of AV over IP JPEG 2K Encoder with 1 X HDMI IN, 1 X LAN, 1 X RS232 Out, featured with videowall function with mounting accessories. as per technical specification etc. as required.
Supply installation testing and commissioning of AV over IP JPEG 2K Decoder with 1 X HDMI Out, 1 X LAN, 1 X RS232 Out , featured with videowall function with mounting accessories. as per technical specification etc. as required.
Supply installation testing and commissioning of Automation Controller with Minimum 4 bidirectional RS232, 4 IR, 4 Relays and 4 GP/IO and 1 Ethernet port to control video wall. as per technical specification etc. as required.
Supplying, installation, testing & commissioning of repeater panel wih 320 character/ Touch screen LCD display with inbuilt reset, acknowledge and silence switches complete as required.
Supplying, installation, testing & commissioning of intelligent analog addressable photothermal detector complete with mounting base complete as required. as per technical specification etc. as required.
Supplying, installation, testing & commissioning of response indicator on surface/recessed MS Box having two LED, metallic cover complete with all connections etc as required. as per technical specification etc. as required.
Supplying, installation, testing & commissioning of fault isolator complete with base as required. as per technical specification etc. as required.
Supplying, installation, testing & commissioning of intelligent addressable thermal detector with rate of rise cum fixed tempreature thermistor complete with base as required. as per technical specification etc. as required.
Supplying, installation, testing & commissioning of intelligent addressable Multi Sensor Detector With Sounder Base as required. as per technical specification etc. as required.
Supplying, installation, testing & commissioning of addressable fire Relay / Monitor module complete as required. as per technical specification etc. as required.
Supplying, installation, testing & commissioning of addressable Sounder control module complete as required. as per technical specification etc. as required.
Supplying, installation, testing & commissioning of intelligent addressable duct detector including suitable Photo detector complete with base as required. as per technical specification etc. as required.
Supplying, installation, testing & commissioning of LPG gas detector With Monitor Module required. as per technical specification etc. as required.
Supplying, installation, testing & commissioning of addressable manual call point complete as required. as per technical specification etc. as required.
Supplying, installation, testing & commissioning of addressable horn cum strobe complete as required. as per technical specification etc. as required.
Supplying, installation, testing & commissioning of intelligent interface unit BACnet/ Modbus protocol i.e. supplying communication links between building management system and fire alarm control panel complete as required. as per technical specification etc. as required.
Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required.
Digital Evac / Public Address System. Supply, Installation, Testing and Commissioning of 8 zone IP based digital Voice Alarm controller expandable upto 128 zones. The voice alarm controller should be able to connect directly over Ethernet. It should have functions like the audio playing, zone control, fault monitoring, log recording, volume control and amplifier switchover. The Voice alarm controller should also have the following functions, 255 Priorities, Time schedule broadcasts, Its own PTT microphone, Capable of amplifier redundancy, 8 trigger inputs/outputs , as per technical specification etc. as required.
Supply, Installation, Testing and Commissioning of 1X500W Class-D Amplifier with 2 independent channels and can provide automatic re-settable overcurrent, overload, overheating, overvoltage, under-voltage and DC protection as per technical specification etc. as required.
Supply, Installation, Testing and Commissioining of Supply, Installation, Testing and Commissioining of 120 W Mixer Amplifier With Requied All accessories
Supply, Installation, Testing and Commissioning of 6W Ceiling Speaker with max SPL1M/1W 96dB . Frequency response of 80Hz-20KHz with a dispersion angle of 160 deg. The speaker should have tappings at 6W/3W/1.5W as per technical specification etc. as required.
Supply, Installation, Testing and Commissioning of 6W Wall mount with max SPL1M/1W 96dB . Frequency response of 160Hz-20KHz. The speaker shoud have tappings at 6W/3W as per technical specification etc. as required.
Supply, Installation, Testing and Commissioning of 20W outdoor Coloum Speaker With Required All Accessories .the Speaker Should Have Tapping 20/10/5/2.5 W .
Supply, Installation, Testing and Commissioning of integrated Audio source with the following features : Two single CD\USB\SD and DAB\FM line outputs can play music applications in two areas, The volumes of the two line outputs can be adjusted separately, CD\USB\SD has three play modes: single play, all play and repeated play, DAB\FM can preset 10 channels of programs, RS485 remote control interface as per technical specification etc. as required.
Supplying and drawing of cable Fire Retardant PVC insulated copper conductor cable in the existing surface / recessed steel conduit of following pairs, cores and size including connections and interconnections etc. as required. Single pair, 2-core, 1.5 sqmm, For PA System
Sec.4.0 Access Control System “Providing & erecting approved make Fingerprint and card based premium Door controller with LCD and Keypad having following features.”(A) Optical Fingerprint and card based Reader (Card personality Module not included) “(B) Dot – Matrix LCD and Touch sense Keypad “(C) Built-in interfaces like door lock, door sense exit Reader, Exit switch, Ethernet RS485, Aux Input & aux output port “(D) 5000 Events, access Control, Time Attendance, Tamper Detection “(E) 4 LEDS and Buzzer”
“Providing & erecting approved make Card Reader having following features. “[A] Wiegand/ RS232 Interface “(B) Power supply from COSEC Door controller or through Separate Adaptor “(C) Compatible with any COSEC Door controllers “(D) 4 LEDs (Status, Alarm, Allowed and Denied) and Buzzer “(E) Tamper Detection”
“Providing & erecting approved make Card Personality Module (CPM) having following features “(A) EM proximity Card Reader Module [Low Frequency] “(B) Compatible with any COSEC Door Controllers and COSEC Reader CA “(C) Supports EM Proximity Card”
“Providing & erecting approved make Exit Switch
“Providing & erecting approved makeMi Fare Card
“Providing & erecting approved make Panel Controller for Multiple Door Controller having following feature “(A) Controls up to 2 Door Contioiiers “(B) Ethernet RS485, USB, Aux Input and Aux output port “(C) 10000 Users Capacity and 100000 Events Storage “(D) 32-bit processor, 32 MB RAM and 32 MB Flash “(E) Compact and Elegant Design”
Providing & erecting approved make Application Software Platform for 100 User having following features “(A) With 20 Users “ (B) Expandable up to 500 Users with COSEC USER 100 “(C) Supports up to 4 Door Controller “(D) Basic Access Control Basic Time Attendance and Enrollment Management (E) Compatible with all COSEC Hardware “(F) Add Other COSEC software modules on requirement.
Providing & erecting approved make Time Attendance Module (TAM) Having following features “(A) Comprehensive Time Attendance and Leave Management Software Module “(B) For 500 Users [AS per COSEC GE PLATFORM USERS] “(C) Attendance and leave Policy Creation “(D) Integration with payroll and HRM “(E) Shift Schedule, Holiday Schedule and Past Adjustment “(F) Manually Attendance Correction “(G) Leave/Tour Application and approval “(H) Report and Charts Generation
“Providing & erecting approved make Access control Module (ACM) having following features (A) Comprehensive Access Control Management (B) For 500 Users [AS PER COSEC GE PLATFORM users] (C) Time, User and Zone Based Access Control (D) Access Zones, Access Modes and Access Levels (E) Advanced Access Control Feature like 2-person rule, First in user rule, Antipass Back, Guard Tour, Duress Detection and more (F) Various Reports Generation
Supply, Installation, Testing & Commissioning of Drop Bolt Or EM Door Lock as per Door type & site Location requirement.
Sec.5.0 Cable TV Distribution System Providing following type of Modular Type Accessories mounted with pvc / metallic box covered with appropriate front plate modules erected with necessary connection. As desired by Engineer In charge. (4) TV Co-axial Socket outlet. Cat. III.
Providing & Erecting approved make following size of TV Co-axial flexible cable comprising inner conductor of solid bare copper insulated with Foam PE & Secondary conductor made of poly – Aluminium film bonded Al. Braids @ suitable coverage overall sheathed with black PVC insulation. (b) RG – 6.
Providing & Erecting approved make following size of TV Co-axial flexible cable comprising inner conductor of solid bare copper insulated with Foam PE & Secondary conductor made of poly – Aluminium film bonded Al. Braids @ suitable coverage overall sheathed with black PVC insulation. (e) RG – 11.
Supply, Installation, Testing and Commissioning of Electric driven main fire pump suitable for automatic operation and consisting of following: complete in all respect as required. a) Horizontal, centrifugal, end suction pump to ensure a minimum pressure of 3.5 kg / sq.cm. at highest and farthest outlet at specified flow of 1620 lpm at 70 m. head conforming to IS standards. b) Squirrel cage induction motor with suitable HP with synchronous speed 3000 RPM, Suitable for operation on 415 volts, 3 phase 50 Hz. AC with IP 55 protection for enclosure, horizontal foot mounted type with Class-F insulation, Conforming to IS standards. c) Common Base plat for Pump and motor and coupling, coupling guard, vibration pad, cables and other accessories as required for complete Installation of pump set.
Supply, Installation, Testing and Commissioning of Diesel Engine Driven (Stand By) fire pump suitable for automatic operation and consisting of following: complete in all respect as required. a) Horizontal, centrifugal, back pullout pump to ensure a minimum pressure of 3.5 kg / cm². at highest and farthest outlet at specified flow of 1620 lpm at 70m. head conforming to IS standards. b) Diesel engine of 1800-2200 RPM water cooled type with radiator conforming to relevant BS & IS standard complete with auto starting mechanism, 12 volts/24 volts electric starting equipment, Diesel tank, exhaust pipe extended up to 1 m. outside pump house duly insulated with 50 mm. thick glass wool with 1.0 mm. thick aluminium sheet cladding, residential silencer, instruments and protection as per specification, stop solenoid for auto stop in the event of fault with audio indications, painted with post office red colour etc. vibration pad & other accessories as required for complete Installation of pump set.
Supply, Installation, Testing and Commissioning of Electric driven pressurization pump suitable for automatic operation and consisting of following: complete in all respect as required. a) Horizontal Type, single stage, centrifugal pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal and flow of 180 lpm at 70m.head conforming to IS standards. b) Squirrel cage induction motor with suitable HP with synchronous speed 3000 RPM, Suitable for operation on 415 volts, 3 phase 50 Hz. AC with IP 55 protection for enclosure, horizontal foot mounted type with Class-F insulation, Conforming to IS standards. c) Common Base plat for Pump and motor and coupling, coupling guard, vribration pad, cables and other accessories as required for complete installation of pump set.
Supply, Installation, Testing and Commissioning of 150 mm dia Pressure Gauge of range 0 - 15 Kg / cm² conforming to IS - 3624 having bourdon tube of stainless steel 316 in cast aluminium, stove enameled, black, weather proof case with outer, screwed aluminium bezel and complete with necessary U-type stainless steel siphon tube and cock including providing suitably painted angle iron support to the tube etc.as per specification complete as required.
Providing & fixing of pressure switch in M.S. pipe line including connection etc. as required.
G.I.. Above Ground Pipe Supply, Installation, Testing and Commissioning of the following sizes of flange jointed / screwed / welded, G.I. Pipes of Class B (Medium class) ISI marked including accessories such as MS bracket, U clamps with Anchor fasteners, tees / elbows / reducers / couplings / unions / bends / flanges / gaskets / Nut bolts etc., and laying on the surface including painting with one coat of anticorrosive primer and two coats of approved red enamel paint after laying and testing after Installation etc. as per specifications complete as required: 150 mm dia.
G.I.. Above Ground Pipe Supply, Installation, Testing and Commissioning of the following sizes of flange jointed / screwed / welded, G.I. Pipes of Class B (Medium class) ISI marked including accessories such as MS bracket, U clamps with Anchor fasteners, tees / elbows / reducers / couplings / unions / bends / flanges / gaskets / Nut bolts etc., and laying on the surface including painting with one coat of anticorrosive primer and two coats of approved red enamel paint after laying and testing after Installation etc. as per specifications complete as required: 100 mm dia.
G.I.. Above Ground Pipe Supply, Installation, Testing and Commissioning of the following sizes of flange jointed / screwed / welded, G.I. Pipes of Class B (Medium class) ISI marked including accessories such as MS bracket, U clamps with Anchor fasteners, tees / elbows / reducers / couplings / unions / bends / flanges / gaskets / Nut bolts etc., and laying on the surface including painting with one coat of anticorrosive primer and two coats of approved red enamel paint after laying and testing after Installation etc. as per specifications complete as required: 80 mm dia.
G.I.. Above Ground Pipe Supply, Installation, Testing and Commissioning of the following sizes of flange jointed / screwed / welded, G.I. Pipes of Class B (Medium class) ISI marked including accessories such as MS bracket, U clamps with Anchor fasteners, tees / elbows / reducers / couplings / unions / bends / flanges / gaskets / Nut bolts etc., and laying on the surface including painting with one coat of anticorrosive primer and two coats of approved red enamel paint after laying and testing after Installation etc. as per specifications complete as required: 50 mm dia.
G.I.. Above Ground Pipe Supply, Installation, Testing and Commissioning of the following sizes of flange jointed / screwed / welded, G.I. Pipes of Class B (Medium class) ISI marked including accessories such as MS bracket, U clamps with Anchor fasteners, tees / elbows / reducers / couplings / unions / bends / flanges / gaskets / Nut bolts etc., and laying on the surface including painting with one coat of anticorrosive primer and two coats of approved red enamel paint after laying and testing after Installation etc. as per specifications complete as required: 40 mm dia.
G.I.. Above Ground Pipe Supply, Installation, Testing and Commissioning of the following sizes of flange jointed / screwed / welded, G.I. Pipes of Class B (Medium class) ISI marked including accessories such as MS bracket, U clamps with Anchor fasteners, tees / elbows / reducers / couplings / unions / bends / flanges / gaskets / Nut bolts etc., and laying on the surface including painting with one coat of anticorrosive primer and two coats of approved red enamel paint after laying and testing after Installation etc. as per specifications complete as required: 25 mm dia.
G.I.. Under Ground Pipe Supply, Installation, Testing and Commissioning of the following sizes of flange jointed / screwed / welded, G.I. Pipes of Class B (Medium class) ISI marked including accessories such as MS bracket, U clamps with Anchor fasteners, tees / elbows / reducers / couplings / unions / bends / flanges / gaskets / Nut bolts etc., and laying on the surface including painting with one coat of anticorrosive primer and two coats of approved red enamel paint after laying and testing after Installation etc. as per specifications complete as required: 150 mm dia.
G.I.. Under Ground Pipe Supply, Installation, Testing and Commissioning of the following sizes of flange jointed / screwed / welded, G.I. Pipes of Class B (Medium class) ISI marked including accessories such as MS bracket, U clamps with Anchor fasteners, tees / elbows / reducers / couplings / unions / bends / flanges / gaskets / Nut bolts etc., and laying on the surface including painting with one coat of anticorrosive primer and two coats of approved red enamel paint after laying and testing after Installation etc. as per specifications complete as required: 100 mm dia.
18.15 Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange. 150 mm dia.
18.15 Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange. 80 mm dia.
Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISi marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required : 150 mm dia.
Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISi marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required : 100 mm dia.
Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISi marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required : 80 mm dia.
Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISi marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required : 50 mm dia.
Supplying, fixing, testing & commissioning of double flanged sluice valve of rating PN 1.6 with non rising spindle, bronze/gun metal seat, ISi marked complete with nuts, bolts, washers, gaskets and conforming to IS 780 of following sizes as required : 150 mm dia.
Supplying, fixing, testing & commissioning of double flanged sluice valve of rating PN 1.6 with non rising spindle, bronze/gun metal seat, ISi marked complete with nuts, bolts, washers, gaskets and conforming to IS 780 of following sizes as required : 80 mm dia.
Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required : 150 mm dia.
Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required : 100 mm dia.
Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required : 80 mm dia.
Supply, installation, testing and commissioning of S.S Single headed oblique type Hydrant valve (Internal & External) with instantaneous gun metal cuplings of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type-A) with blank pvc cap and chain as required.
Supply, Installation, Testing and Commissioning of Fire Hose Cabinet of size 750mmx600mx250mm fabricated from 18 swg thick MS sheet with 6mm thick glazed hinged type centre opening doors having locking arrangement suitable for accommodating 2 nos RRL hose pipes, 1 no. nozzle, branch pipe & painting with two coats of anti-corrosive primer and two coats of approved red enamel paint etc. complete as required.
Supply, installation, testing and commissioning 63 mm dia, 15 Mtrs. long RRL Hose Pipe with 63 mm dia male & female S.S metal couplings duly binded with GI wire, rivets etc. conforming to IS 636 (type-A - RRL) as required.
Supply, Installation, Testing and commissioning of 63 mm S.S Branch Pipe with 20mm GM nozzle conforming to IS:903, suitable for instantaneous connection to interconnect hose pipe coupling as required.
Supply, installation, testing and commissioning of First- Aid Hose Reel equipment with G.I. construction spray painted in post office red, conforming to IS:884 with up to date amendments, complete with the following as required. (a) 40 m. long, 25 mm dia. water hose thermoplastic (Textile reinforced) Type-2 as per IS:12585. (b) 25 mm dia gun metal globe valve & nozzle (c) Drum and swinging type fixing brackets on the wall. (d) Connections from riser with 25 mm dia. Gun metal ball valve.
Providing and fixing standard fireman Axe with heavy duty insulated rubber handle as per IS: 926 with clamps.
Providing, fixing including testing and commissioning of Drain valve & assembly with 2 nos. of 1" ball valve, sight glass, internal 1" pipe & required fittings. 25mm dia
Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required:4 way - 150 mm dia M.S. Pipe
Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required:2 way - 100 mm dia M.S. Pipe
Supply, Installation, Testing and Commissioning of Gun Metal Air Release Valve with necessary fittings. Size: 25 mm (For Riser)
Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68 degree centigrade with required accessories : Upright Sprinkler
Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68 degree centigrade with required accessories : Pendent Sprinkler
Supplying, installation, testing & commissioning of sprinkler flexible pipe (UL Listed) of stainless steel complete with 15 NPT on reducer thread with maximum working pressure of 175 PSI test pressure of 875 PSI (Burst) with branch line (Inlet) 25mm NPT male thread to sprinkler head (Outlet) 15mm NPT female thread with reducer, nipple, 2 side brackets, center bracket, stockbar of following sizes comolete as reauired. Size: 1200mm
Supplying, installation, testing & commissioning of sprinkler flexible pipe (UL Listed) of stainless steel complete with 15 NPT on reducer thread with maximum working pressure of 175 PSI test pressure of 875 PSI (Burst) with branch line (Inlet) 25mm NPT male thread to sprinkler head (Outlet) 15mm NPT female thread with reducer, nipple, 2 side brackets, center bracket, stockbar of following sizes comolete as reauired. Size: 1000mm
Providing, fixing, testing & commissioning of installation control valve of cast iron body, brass/bronze working parts comprising of water motor alarm, bronze seat clapper, clapper arm and hydraulically driven mechanical gong bell to sound continuous alarm when the wet riser/sprinkler system activates, pressure gauges, emergency releases, strainer, pressure switch, cock valve complete with drain valve and bypass, test control box, ball valves, MS pipe of required size, flanges, orifice plate, gasket etc of follwing sizes as required a) 150 mm Dia
Supplying & erecting carbon dioxide (CO2) fire extinguisher user of following capacity with necessary clamps made from 50 x 6 mm G.I. Flat with nut & bolts grouted in wall complete. For 4.5 Kg Capacity
Supply, installation, testing and commissioning of ABC type 6 kg Fire Extinguisher confirm to IS:15683, with ISI marked / TAC approved fitted with required accessories including wall suspension brackets.
Providing, fixing AUTO GLOW photo luminescent Signage's as per IS standard in Block / Small Letters on rigid sheet with necessary wall or Ceiling fittings as Specified Sizes: Fire Equipment: 4" x 12"
Providing, fixing AUTO GLOW photo luminescent Signage's as per IS standard in Block / Small Letters on rigid sheet with necessary wall or Ceiling fittings as Specified Sizes: Fire Lift: 4" x 12"
Providing, fixing AUTO GLOW photo luminescent Signage's as per IS standard in Block / Small Letters on rigid sheet with necessary wall or Ceiling fittings as Specified Sizes: Fire Exit: 4" x 12"
Getting Approval/NOC of Fire protection system (Hydrant, Sprinkler etc..) from local fire authority and any other relevant statutory authority at initial and various other stages of work, including preparation of report/drawings as per fire authority
SITC of Microprocessor based Net-workable Analogue Addressable Fire Alarm Control Panel. The Panel shall be compliant with EN54-2, EN54-4 and approved by LPCB. The Fire Alarm Control Panel shall have inbuilt 3 loops and expandable upto 4 Loops. The Panel must have large graphic display. The Panel must also have the capability to take Addressable Intelligent Wired and Wireless Devices on same loop. Each loop shall have a capacity of 127 analogue Addressable devices and 127 Base sounders/Base Sounder Beacons. The Panel shall have 240 V AC power supply along with automatic Battery Charger. Approved by LPCB
SITC of Latitude 2 Loop Card
SITC of Active Repeater Panel to be integrated with Fire Alarm Control Panel,larger display Full colour 800 x 480 LCD with resistive touch screen and automatic back-light dimming and the status of any Fire/Fault of Integrated Fire Alarm Panels, Panel should compliant with EN54-2, EN54-4 and Approved by LPCB
SITC of Network Module. The Module shall connect Panels and Repeator Panels through RS485. The Module shall use RS485 data at a Baud rate of 115200 Bauds. The Network Module must be configured Master/Slave, Multiple Master/Slave and Peer to Peer net W\working
SITC of Manual Call Point approved to EN54-11:2001, Approved by LPCB Easy to install, push-fit wiring terminals
Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1OOOV rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required.
SITC of 2 channel Class AB Professional Power Amplifier 2 x 900 W Power with Output Power ≥ 550W@8 ohms, ≥ 900W@4 Ohms for dual channel operation;Max Bridged Output Power ≥ 2800W @ 4 ohms Frequency Response (+/- 1dB) ref. 1 KHz:10 Hz to 40 kH,Max input level:+21dBu,Crosstalk< - 80dB,input impedance:20kohm,signal to noise ratio >109 dB .Protection Audio limiters, High temperature, DC, HF, Back-EMF, Peak current limiters, Inrush current limiters, Turn on delay
SITC of Power amplifier, 480W
SITC of Ceiling loudspeaker, 6W, screw mount Suitable for speech and music reproduction ,Screw mounting ,Simple power setting, EN 54‑24 certified
SITC of Column loudspeaker 24W, black
SITC of Gooseneck microphone Unidirectional condenser microphone Flexible stem Phantom powered by amplifier On/off sliding switch with priority contact Supplied with fixed 2 m (78 in) cable and lockable DIN connector
Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1OOOV rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required.
Supply, installation and dressing of RACK 22 U with necessary power mounting and fan arrangement
Supply, installation, testing and commissioning of 9 U Rack including necessary power mounting and fan arrangements.
Supply, Installation, Testing and Commissioning of Music Source – CD / DVD / FM Player
SITC of ODU design at 44 Degree Ambient condition as per following details. Supply Installation, Testing & Commissioning of modular type Variable Refrigerant Volume air cooled Outdoor units suitable for cooling and heating, having all hermetically sealed inverter type Scroll Compressor(s), microprocessor based Controller, top discharge type condensing unit(s), with R410 A Refrigerant (Or Eco Friendly Green Gas if any), vibration isolators, with suitable foundation, MS Stand for Unit with necessary paint etc. complete as required. The unit shall deliver the rated capacity at AHRI Conditions and work even at 50°C ambient temperature without tripping. The unit shall be suitable to work on 400V +/- 10%, 3 Phase, 50Hz AC power supply. The unit shall be filled with first charge of the refrigerant and ready for use as required. The COP at AHRI conditions shall not be less than 3.1 and IEER not less than 6.5. (Design should be got approval before execution from engineer in charge). ODU design at 44 Degree Ambient condition. VRF SYSTEM-1 30 HP (16+14)
VRF SYSTEM-2 18 HP
VRF SYSTEM-3 38 HP (20+18)
VRF SYSTEM-4 44 HP (16+14+14)
VRF SYSTEM-6 40 HP (20+20)
VRF SYSTEM-7 36 HP (18+18)
VRF SYSTEM-9 46 HP (16+16+14)
VRF SYSTEM-11 20 HP
VRF SYSTEM-12 12 HP
VRF SYSTEM FOR 8600 CFM AHU - 36 HP (18+18)
VRF SYSTEM FOR 12800 CFM AHU - 48 HP (16+16+16)
VRF SYSTEM FOR 6000 CFM AHU FOR GATHERING & LOUNGE IDU- 26 HP (14+12)
VRF SYSTEM FOR FOR BANQUET PREFUCTION- 12 HP
INDOOR UNIT-4-WAY-CASSETTE TYPE Supply, installation, testing and commissioning of following minimum capacity 4-way radial flow as per approval VRV Cassette Type Indoor ceiling mounted unit equipped with synthetic washable media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX Copper coil, electronic expansion valve, outer cabinet, drain pump, grill, necessary supports, vibration isolation, cord less remote control etc., suitable for operation on single phase 230 V ± 10%, 50Hz AC supply, max noise level 60dB @ 400 cfm per TR(minimum) complete, as required. The unit shall have automatic force shut down provision in case of fire on receiving signal from BMS System. The cooling capacity of indoor unit will be at air inlet conditions of 24 Degree C DB and 19 Degree C WB temperature fresh air provision compatible for Remote Operation System. 2.0 TR
INDOOR UNIT-4-WAY-CASSETT COMPACT TYPE Supply, installation, testing and commissioning of following minimum capacity 4-way radial flow as per approval VRV Cassette Type Indoor ceiling mounted unit equipped with synthetic washable media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX Copper coil, electronic expansion valve, outer cabinet, drain pump, grill, necessary supports, vibration isolation, cord less remote control etc., suitable for operation on single phase 230 V ± 10%, 50Hz AC supply, max noise level 60dB @ 400 cfm per TR(minimum) complete, as required. The unit shall have automatic force shut down provision in case of fire on receiving signal from BMS System. The cooling capacity of indoor unit will be at air inlet conditions of 24 Degree C DB and 19 Degree C WB temperature fresh air provision compatible for Remote Operation System.1.6 TR
INDOOR UNIT-1-WAY-CASSETTE TYPE Supply, installation, testing and commissioning of following minimum capacity 4-way/2 way/radial flow as per approval VRV Cassette Type Indoor ceiling mounted unit equipped with synthetic washable media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX Copper coil, electronic expansion valve, outer cabinet, drain pump, grill, necessary supports, vibration isolation, cord less remote control etc., suitable for operation on single phase 230 V ± 10%, 50Hz AC supply, max noise level 60dB @ 400 cfm per TR(minimum) complete, as required. The unit shall have automatic force shut down provision in case of fire on receiving signal from BMS System. The cooling capacity of indoor unit will be at air inlet conditions of 24 Degree C DB and 19 Degree C WB temperature fresh air provision compatible for Remote Operation System. 2.1 TR
INDOOR UNIT-DUCTABLE TYPE: Supply, installation, testing and commissioning of following minimum capacity and external static pressure VRV ceiling mounted ductable type Indoor unit equipped with washable synthetic media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX copper coil, electronic expansion valve,with drain pump, corded remote control, outer cabinet, vibration isolators, drain pan, other necessary supports etc., suitable for operation on single phase AC supply 230 V ± 10%, 50 Hz complete as required. The unit shall have automatic force shut down provision in case of fire on receiving signal from BMS System. The cooling capacity of indoor unit will be at air inlet conditions of 24 Degree C DB and 19 Degree C WB temperature. 1.6 TR Buit in Drain pump is a part of uni
2.0 TR Buit in Drain pump is a part of uni
2.6 TR Buit in Drain pump is a part of uni
3.1 TR Buit in Drain pump is a part of uni
INDOOR UNIT-HI WALL TYPE: Supply, installation, testing and commissioning of following minimum capacity VRV High wall type Indoor unit equipped with washable synthetic media pre-filter, fan section with noise level maximum 60 dB @min 400 cfm /dynamically balanced blower, multispeed motor, coil section with DX copper coil, electronic expansion valve, outer cabinet, cord less remote control, drain pan, necessary accessories etc., suitable for operation on 230 V ± 10%, 50 Hz, single phase AC supply, complete as required. The unit shall have automatic force shut down provision in case of fire on receiving signal from BMS System. The cooling capacity of indoor unit will be at air inlet conditions of 24 Degree C DB and 19 Degree C WB temperature. 0.6 TR
Supply, Installation, Testing & Commissioning of Ref Joints. (1 lot per circuit VRF SYSTEM-1 30 HP (16+14)
VRF SYSTEM-2 18 HP
VRF SYSTEM-3 38 HP (20+18)
VRF SYSTEM-4 44 HP (16+14+14)
VRF SYSTEM-5 38 HP (20+18)
VRF SYSTEM-6 40 HP (20+20)
VRF SYSTEM-7 36 HP (18+18)
VRF SYSTEM-8 30 HP (16+14)
VRF SYSTEM-9 46 HP (16+16+14)
VRF SYSTEM-10 18 HP
VRF SYSTEM-11 20 HP
VRF SYSTEM-12 12 HP
VRF SYSTEM-13 30 HP (16+14)
VRF SYSTEM-14 18 HP
VRF SYSTEM-15 12 HP
VRF SYSTEM-16 20 HP
VRF SYSTEM FOR 8600 CFM AHU - 36 HP (18+18)
VRF SYSTEM FOR 12800 CFM AHU - 48 HP (12+12+12+12)
VRF SYSTEM FOR 6000 CFM AHU FOR GATHERING & LOUNGE IDU- 26 HP (14+12
VRF SYSTEM FOR FOR BANQUET PREFUCTION- 12 HP S.I.T.C. of AHU KITS with Control Box & Remote controllers for AHUs
Coil Capacity 29.0 TR, 6RD - Suitable for VRF application. Intertwined circuits.
Coil Capacity 38.4 TR, 6RD - Suitable for VRF application. Intertwined circuits.
Coil Capacity 16.0 TR, 6RD - Suitable for VRF application. Intertwined circuits.
Supply, Installation, Testing and Commissioning Air Quantity 12800 CFM Static Pressure: 40-50 mm Coil Capacity 38.4 TR, 6RD - Suitable for VRF application.I ntertwined circuits.
Supply, Installation, Testing and Commissioning Air Quantity 6000 CFM Static Pressure: 40-50 mm Coil Capacity 16.0 TR, 6RD - Suitable for VRF application.Intertwined circuits.
Supply, Installation, Testing and Commissioning Air Quantity 12800 CFM Coil Capacity 38.4 TR, 6RD - Suitable for VRF application. Intertwined circuits.
Supply, Installation, Testing and Commissioning Air Quantity 6000 CFM Coil Capacity 16.0 TR, 6RD - Suitable for VRF application. Intertwined circuits.
S.I.T.C. of PLENUMS to inter connect between AHU & Smoke evacuation fans as per below specs. Frame work : Aluminium anodised with Thermal Break Panel Constrution : Double Skin, Outer Skin 1.0 Precoated G.I, Inner Skin 1.0 Plain G.I. Panel Thickness : 46 ± 2mm Insulation 40 ± 2 kg / m² CFC free PUF Frame work : Aluminium anodised with Thermal Break Panel Constrution : Double Skin, Outer Skin 1.0 Precoated G.I, Inner Skin 1.0 Plain G.I. Panel Thickness : 46 ± 2mm Insulation 40 ± 2 kg / m² CFC free PUF. 1500X1700X1450HT
Supply, Installation, Testing and Commissioning of Central Remote Control Central Remote Controller including control cabling from all IDU/ODU/OA Units Minimum Capabilities: Monitoring & control of temperature of each Area ON/OFF control for each Area Weekly scheduling for each Area Overriding of control function of individual control units Scheduling & historical data storage of conditions as per requirement LCD Display Panel To be integrated with Fire Panel To be installed at Reception Area. Estimate cabling qty accordingly. *In case the no. IDUs / ODUs is beyond the capability of a single CRC, then the rate quoted here should include cost of add-on modules / multiple CRCs / cabling For Lower ground, reception, Office, Game zone
For Spa & Gym area
Restaurant & Bar area
Guest Rooms
Banquets, Prefunction, Gathering zone & Lounge area
Supply, Installation, Testing & Commissioning Air Quantity 7000 CFM with DX Unit Coil Capacity 34.0 TR (intertwin circuits of (8.5 TR+8.5 TR) X 2) 4 nos 8.5 TR S.I.T.C. of DX Outdoor condensing unit comprising of Scroll compressor's, condenser, coils, propeller, axial fans pressure switches, HP-LP cut outs etc. - R.410 GAS
Supply, Installation, Testing & Commissioning Air Quantity 6570 CFM with DX Unit Static 50 mm 4 nos 8.5 TR S.I.T.C. of DX Outdoor condensing unit comprising of Scroll compressor's, condenser, coils, propeller, axial fans pressure switches, HP-LP cut outs etc. - R.410 GAS
Supply, Installation, Testing & CommissioningAir Quantity 1640 CFM with DX Unit Static 50 mm Coil Capacity 8.5 TR 1 nos 8.5 TR S.I.T.C. of DX Outdoor condensing unit comprising of Scroll compressor's, condenser, coils, propeller, axial fans pressure switches, HP-LP cut outs etc. - R.410 GAS
Exposed Refrigerant Piping and Insulation for NON-VRF System S.I.T.C. of set of refrigerant pipes, pipes fitting. Refrigerant piping travelling vertically up along the wall or in the shaft and Horizontal piping running on terrace or on plat form shall be installed on G.I. pipe tray & finally covered with G.I. sheet cover as an protation. Entire set of piping to be insulated with specified thickness of flexible close cell Eastomeric Class-O foam (Tubular section). After Insulation pipe has to be coverd with Glass Cloth to prevent deterioration. Apply 2 coats of UV paint over insulation without waiting for total completion of insulation. (Refer specification table for coastal areas) DO NOT KEEP INSULATION EXPOSED TO SUN FOR MORE THAN 4 DAYS. 8.5 TR
S.I.T.C. of Belt Driven Square Duct Ventilation Unit with Backward Inclined Centrifugal Fan,comprising of Wheel: Non-overloading backward inline fan constructed out of Aluminium. Wheel should be statically & dynamically balanced according to AMCA standards The Wheel cone & fan inlet should be matched & shall have precise running tolerances for maximum performance & operating efficiency. Single thickness blades must securely riveted & welded to a heavy gauge back plate & wheel cones. Motor: IE2 Motor enclosure should be totally enclosed fan cooled (TEFC Motor enclosure should be totally enclosed fan cooled (TEFC Motors are to be permanently lubricated, heavy duty ball bearing type to match with the fan load & pre- wired to the specific voltage & phase. Shafts & Bearings: Fan shaft should be ground & polished solid steel with an anti-corrosive coating Permanently sealed bearings or pillow block ball bearings Housing/Cabinet construction Square design constructed of heavy gauge galvanized steel or optional aluminum construction shall include square duct mounting collars Housing and bearing supports shall be constructed of heavy gauge galvanized steel, bolted to prevent vibration and to rigidly support the shaft and bearing assemble Housing Supports and Drive Frame Housing supports are to be constructed of galvanized steel with formed flanges Drive frame is made of galvanized steel which supports the shaft, bearings and reinforces the housing. Pivoting motor plate with adjusting screws to make belt tensioning operation Drive Assembly: Belts, pulleys, and keys oversized for a minimum of 150 percent of driven horsepowe Duct Collars: Square design to provide a large discharge area Inlet and discharge collars provide easy duct connection Access Panel: Two side access panels, permit easy access to all internal components Located perpendicular to the motor mounting pane Belt Guard: Three-sided fabricated galvanized steel Covers drive belt for safety and smooth drive operation Included with Motor Cover option Insulated Housing: Thickness: 25mm For noise reduction and condensation contro Constructed of fiberglass liner Motor Cover:Fabricated from galvanized steel Covers external motor and drives for safety Includes Bearing Cover and Belt Guard Fire retardant quality Double Canvass flexible connection on Inlet & Outlet of Fan is part of S.I.T.C. of following capacity units. FOR TOILET EXHAUST (SHAFT-6) Exhaust Air Quantity: 540 CFM 30MM STATIC
FOR TOILET EXHAUST (SHAFT-7) Exhaust Air Quantity: 720 CFM 30MM STATIC
FOR TOILET EXHAUST OF LOWEST GROUND Exhaust Air Quantity: 875 CFM 30MM STATIC
FOR TOILET EXHAUST OF GROUND & SECOND FLOOR Exhaust Air Quantity: 950 CFM 25MM STATIC
S.I.T.C. of Direct Driven Square Duct Ventilation Unit with Backward Inclined Centrifugal Fan,comprising of Wheel: Non-overloading backward incline fan constructed out of Aluminium. Wheel should be statically & dynamically balanced according to AMCA standards The Wheel cone & fan inlet should be matched & shall have precise running tolerances for maximum performance & operating efficiency. Single thickness blades must securely riveted & welded to a heavy gauge back plate & wheel cones. Motor:Motor enclosure should be totally enclosed fan cooled (TEFC) Motors are to be permanently lubricated, heavy duty ball bearing type to match with the fan load & pre wired to the specific voltage & phase. Housing/Cabinet construction: Square design constructed of heavy gauge galvanized steel or optional aluminum construction shall include square duct mounting collars Housing and bearing supports shall be constructed of heavy gauge galvanized steel, bolted to prevent vibration and to rigidly support the shaft and bearing assemble Housing Supports and Drive Frame: Housing supports are to be constructed of galvanized steel with formed flanges Drive frame is made of galvanized steel which supports the shaft, bearings and reinforces the housing. Duct Collars: Square design to provide a large discharge area Inlet and discharge collars provide easy duct connection Access Panel: Two side access panels, permit easy access to all internal components Located perpendicular to the motor mounting panel Motor Cover: Fabricated from galvanized steel Covers external motor and drives for safety Fire retardant quality Double Canvass flexible connection on Inlet & Outlet of Fan is part of S.I.T.C. of following capacity units. TOILET EXHAUST (SHAFT-1,2,3) Exhaust Air Quantity: 1800 CFM 30MM STATIC
TOILET EXHAUST (SHAFT-4) Exhaust Air Quantity: 1440 CFM 30MM STATIC
TOILET EXHAUST (SHAFT-5) Exhaust Air Quantity: 1260 CFM 30MM STATIC
TOILET EXHAUST (SHAFT-8,9) Exhaust Air Quantity: 1620 CFM 30MM STATIC
TOILET EXHAUST (SHAFT-10) Exhaust Air Quantity: 1700 CFM 30MM STATIC
TOILET EXHAUST (SHAFT-11) Exhaust Air Quantity: 1170 CFM 30MM STATIC
TOILET EXHAUST (SHAFT-12,13,14) Exhaust Air Quantity: 1710 CFM 30MM STATIC
S.I.T.C. of Inline Circular Duct Fan Inline circular duct mount fan for toilet exhaust casing should be manufactured from galvanized steel sheet. External rotor motors with mixed flow impeller. Should be high efficiency & low noise speed should be controllable accordingly speed controller will be a part of passage. Integral thermal contacts with electrical reset required. Brackets for hanging should be part of fan supply. Fire retardant quality Double Canvass flexible connection on Inlet & Outlet of Fan is part of S.I.T.C. of following capacity units. TOILET AREA EXHAUST AT LOWER GROUND Exhaust Air Quantity: 600 CFM 25MM STATIC
TOILET AREA EXHAUST AT LOWER GROUND Exhaust Air Quantity: 300 CFM 25MM STATIC
TOILET AREA EXHAUST AT LOWER GROUND Exhaust Air Quantity: 770 CFM 20MM STATIC
S.I.T.C. of 2 HRS Fire Rated Smoke Evacuation fans with Motor Supplying, installation, testing and commissioning of AMCA Certified (For Air and Sound Performance) ceiling hung / floor mounted TUBE/VANE AXIAL flow fans of following capacity with GSS casing/ standard M.S. construction and aluminium alloy impellers with high efficiency aero-foil sections, blades, the impeller directly driven by TEFC induction motor should be of high efficiency class IE2 (for Normal Mode Supply and Exhaust Fans) suitable for 3 Phase/ 50 Hz/ 415V ± 10 % . Motor of exhaust fans shall be of high temperature resistance "Class H Smoke Spill" 300° C for 2 hrs. Motor make shall be same as mentioned on the fire certificate. Fan total efficiency should not be less than 70%. All the fans shall be hot dip galvanized with minimum 220 GSM Zinc Coating and complete with bird screen at inlet. Entire fan model & AMCA Seal shall appear in technical submittal of fan. The fans shall have sound level not exceeding more than 75 dB(A)at three meter distance at both ends when measured in hemispherical reverberant room conditions. To achieve specified dB(A) level sound attenuators shall be provided at inlet / outlet and included in the cost. Static pressure calculation of Fans shall be checked by Vendor/Contractor prior to supply of Fans as per site condition. Also fan should be provided with Bird Screen, Back Draft Damper, Mounting feet, Vibration Isolator, Air Qty. - 4000 CFM Static Pressure - 50 mmwc
Air Qty. - 6000 CFM Static Pressure - 50 mmwc
Air Qty. - 2000 CFM Static Pressure - 50 mmwc
Air Qty. - 20000 CFM Static Pressure - 50 mmwc
LOW SIDE WORK - SUPPLY, INSTALLATION, TESTING, COMMISIONING Refrigerant Piping & Insulation for VRF System S.I.T.C. of set of refrigerant pipes, pipes fitting, Y joints. The Pipes are to be supported from G.I. Angles \ Flats supports. Entire set of piping to be insulated with specified thickness of flexible closed cell Elastomeric Class-O foam (Tubular section). After Insulation pipe has to be covered with Glass Cloth (1LOT per Unit). (Refer specification table for coastal areas VRF SYSTEM-1 30 HP (16+14)
VRF SYSTEM-2 18 HP
VRF SYSTEM-3 38 HP (20+18)
VRF SYSTEM-4 44 HP (16+14+14)
VRF SYSTEM-6 40 HP (20+20)
VRF SYSTEM-7 36 HP (18+18)
VRF SYSTEM-9 46 HP (16+16+14)
VRF SYSTEM-11 20 HP
VRF SYSTEM-12 12 HP
VRF SYSTEM FOR 8600 CFM AHU - 36 HP (18+18)
VRF SYSTEM FOR 12800 CFM AHU - 48 HP (12+12+12+12)
VRF SYSTEM FOR 6000 CFM AHU FOR GATHERING & LOUNGE IDU- 26 HP (14+12)
VRF SYSTEM FOR FOR BANQUET PREFUCTION- 12 HP
Exposed Refrigerant Piping and Insulation for VRF System S.I.T.C. of set of refrigerant pipes, pipes fitting, Y joints. Refrigerant piping travelling vertically up along the wall or in the shaft and Horizontal piping running on terrace or on plat form shall be installed on G.I. pipe tray & finally covered with G.I. sheet cover as an protation. Entire set of piping to be insulated with specified thickness of flexible close cell Eastomeric Class-O foam (Tubular section). After Insulation pipe has to be coverd with Glass Cloth to prevent deterioration. Apply 2 coats of UV paint over insulation without waiting for total completion of insulation. (Refer specification table for coastal areas) DO NOT KEEP INSULATION EXPOSED TO SUN FOR MORE THAN 4 DAYS. VRF SYSTEM-1 30 HP (16+14)
VRF SYSTEM-2 18 HP
VRF SYSTEM-3 38 HP (20+18)
VRF SYSTEM-4 44 HP (16+14+14)
VRF SYSTEM-6 40 HP (20+20)
VRF SYSTEM-7 36 HP (18+18)
VRF SYSTEM-9 46 HP (16+16+14)
VRF SYSTEM-11 20 HP
VRF SYSTEM-12 12 HP
VRF SYSTEM FOR 8600 CFM AHU - 36 HP (18+18)
VRF SYSTEM FOR 12800 CFM AHU - 48 HP (12+12+12+12)
VRF SYSTEM FOR 6000 CFM AHU FOR GATHERING & LOUNGE IDU- 26 HP (14+12)
VRF SYSTEM FOR FOR BANQUET PREFUCTION- 12 HP
Drain Piping and pipe insulation S.I.T.C. of Drain piping shall be made out of rigid CPVC pipes of SCHEDULE 40 class. The piping Shall be supported by clamping on proper support. The piping shall be insulated with 8 mm thick Armaflex class O type insulation. 40mm DIA
32mm DIA
25mm DIA
19mm DIA
S.I.T.C. of MS Fabricated Stand for VRF, Frame Work for Copper Piping complete with Epoxy Painting, Vibration Isolation Pads, supports , Hangers, Brachets etc. as Approved by Architect / Consultant. Applay 2 Coats of Primer + Epoxy (For Outdoor Installation) Primer + Black Paint (For Indoor Installation) VRF SYSTEM-1 30 HP (16+14)
VRF SYSTEM-2 18 HP
VRF SYSTEM-3 38 HP (20+18)
VRF SYSTEM-4 44 HP (16+14+14)
VRF SYSTEM-5 38 HP (20+18)
VRF SYSTEM-6 40 HP (20+20)
VRF SYSTEM-7 36 HP (18+18)
VRF SYSTEM-8 30 HP (16+14)
VRF SYSTEM-9 46 HP (16+16+14)
VRF SYSTEM-10 18 HP
VRF SYSTEM-11 20 HP
VRF SYSTEM-12 12 HP
VRF SYSTEM-13 30 HP (16+14)
VRF SYSTEM-14 18 HP
VRF SYSTEM-15 12 HP
VRF SYSTEM-16 20 HP
VRF SYSTEM FOR 8600 CFM AHU - 36 HP (18+18)
VRF SYSTEM FOR 12800 CFM AHU - 48 HP (12+12+12+12)
VRF SYSTEM FOR 6000 CFM AHU FOR GATHERING & LOUNGE IDU- 26 HP (14+12)
VRF SYSTEM FOR FOR BANQUET PREFUCTION- 12 HP
SHEET METAL DUCTWORK FACTORY FABRICATED AS PER IS655 Supply, Installation Fabrication and Testing of Factory fabricated sheet metal ducts as per IS-655 Standards in accordance with the approved shop drawings and as per required by the specifications Note: Return air Ducts of Banquets are also used for smoke evacuation system, Hence, Thickness of sheets can not be deviated. DUCT SIZE GAUGE FLANGES 0-750 MM 24 C & SS CLEATS/TDF
2251 & above 18 TDF
22G Machine rolled circular duct
S.I.T.C. of Linear Grilles powder coated Extruded Aluminium Linear Grilles of Required Air flow Angles
S.I.T.C. of powder coated Extruded Aluminium Grille Flow Diverters of Required Air flow Angles. Air flow diverters or Equalising damper suitable for square & rectangular grilles are to be made individually adjustable to control air direction. Should be manufactured with aluminium extruded blades, in range of sizes and can be adjusted manually by removing the grille or diffuser core
Aluminium Extruded Low Leakage Damper Low leakage Damper within ducts to be provided with suitable ducts lever and quadrants for manual control of volume of air flow and for proper balancing of the air distribution system(Damper manufacturer has to submit low leakage certification by any national or international standard). as per Tender specification:
10mm thick
S.I.T.C. of DUCT THERMAL INSULATION - WITHIN THE BUILDING To be insulated with specified thickness of flexible closed cell Elastomeric anti-microbial protection Class-O foam sheet.25mm thick
19mm thick
S.I.T.C. of Duct Thermal Exposed to Sun - Thermobreak No Clad Exposed duct insulation with Physically crosslinked polyolefin foam with factory laminated heavy duty and ultra-tough multi-layered composite aluminium foil facing with puncture resistance of >400N as per ASTM D4833 and Class ‘0’ fire properties as per BS 476 Part 6 & 7 and as per the specification. 25mm thick
19mm thick
S.I.T.C. of False Ceiling Insulation To be insulated with specified thickness of flexible closed cell Elastomeric Class-O foam sheet. Insulation sheet shall be pasted on the false ceiling boards with modified neoprene contact adhesive. Overlapse shall be screwed with galvenised screws to avoid rusting.
S.I.T.C. of Underdeck Insulation with 50mm Thick Extruded Polysterene as Shown in Drawing
Drain Piping without Insulation S.I.T.C. of Drain piping made out of GI "B" Class drain piping; from each AHU to nearest drain point. Provide suitable U traps 40 DIA
S.I.T.C. of Flexible Duct OF 125 DIA Made of double lamination of films permanently bonded to a coated spring tough steel wire helix. Thermal insulation should be provided by wrapping the exterior with a blanket of fiberglass wool insulation of 25mm thick and density of 16 kg/m³. The flexible duct should be puncture resistant construction.
S.I.T.C. of PVC Pipe with Pipe Insulation S.I.T.C. of Rigid PVC Pipe of 6 kg/cm² Class. All Branch Pipes are to be Clamped Securely to Outlets o Disc Valve & Duct Inlets and Properly Supported from Beam/Slab. (These pipes are to be insulated with 13mm thick flexible close cell Elastomeric Class-O foam (Tubular section)) 125mm DIA
S.I.T.C. OF VOLUME FLOW LIMITER (TROX MAKE ONLY) Circular volume flow limiter manufactured from high quality plastic (UL94V1) for constant flow rate control consist of a regulator with set point adjustment, The regulation mechanism with leaf spring and low friction silicon free oscillation damper 125mm DIA SUITABLE FOR 90 CFM
S.I.T.C. of non-insulated PVC Pipe S.I.T.C. of Rigid PVC Pipe of 6 kg/cm² Class. All Branch Pipes are to be Clamped Securely to Outlets o Disc Valve & Duct Inlets and Properly Supported from Beam/Slab 200 DIA
S.I.T.C. of an Exhaust valve/Disc Valve Manufactured from Sheet metal Dully powder coated/re-cyclabe polypropylene. The device should have lockable central cone which should be rotatable to adjust pressure & the Air Volume. 150 DIA
S.I.T.C. of Air Transfer Grille Should be suitable for mounting in doors, partitions and wall should have no sight feature to be constructed from aluminium extrusions sections fabricated in tube cores and mitred, cleated frames.
S.I.T.C. of G.I. Cowl with Bird screen of SS 304 Wiremesh
S.I.T.C. OF Rectangular Ducts shall be made out of galvanised steel sheets of ducting quality. The galvanised sheet shall have thickness as specified below and zinc coating of minimum 120gms/sqm. 18 GAUGE
S.I.T.C. of Motorised Fire & Smoke damper along with Control Panels Motorised Fire & Smoke damper: Combination fire & smoke dampers meeting or exceeding the following specification shall be furnished and installed at locations shown in the plans or described in the schedules. Dampers shall meet the fire resistance rating of 2 hours as per UL555 and shall be tested and certified at CBRI. Fire damper frame shall be galvanised steel of 1.6mm thickness, formed into a structural hat channel in 4 piece construction with integral overlapping gusset reinforcements (screws are not acceptable) in each corner to assure square corners. Top and Bottom frame members shall be low profile design to maximize the free area on small dampers. Damper blades shall be single skin galvanized steel of 1.6mm thickness and must have 3 accurately roll formed longitudinal grooves for reinforcement and proper closure and operation. The blades shall be arranged in parallel to provide positive shut off. Each blade shall have axles supported on both sides with sintered bronze self lubricating bearings turning in an extruded hole in the frame. All blades shall be interconnected using linkage concealed int he frame. Jamb seals shall be stainless steel flexible metal compression type. Each Damper should be supplied with a 24v actuator mounted by the manufacturer at the time The control panel should provide the minimum of the following features. 220V/24v step down transformer Open/Close indication light Power on Indication light Test button Aux contact points450X450
ELECTRICAL WORK S.I.T.C. of Power Cables (FRLS) between TPN to Outdoor Unit on proper G.I. racewa VRF SYSTEM-1 30 HP (16+14)
VRF SYSTEM-2 18 HP
VRF SYSTEM-3 38 HP (20+18)
VRF SYSTEM-4 44 HP (16+14+14)
VRF SYSTEM-6 40 HP (20+20)
VRF SYSTEM-7 36 HP (18+18)
VRF SYSTEM-9 46 HP (16+16+14)
VRF SYSTEM-11 20 HP
VRF SYSTEM-12 12 HP
VRF SYSTEM FOR 8600 CFM AHU - 36 HP (18+18)
VRF SYSTEM FOR 12800 CFM AHU - 48 HP (12+12+12+12)
VRF SYSTEM FOR 6000 CFM AHU FOR GATHERING & LOUNGE IDU- 26 HP (14+12)
VRF SYSTEM FOR FOR BANQUET PREFUCTION- 12 HP
S.I.T.C. of Control Cables (FRLS) to be carried out in separate conduiting For VRV systems
S.I.T.C. of Earthing 4 sqmm Copper Single Core Flexible Wire For VRV system
S.I.T.C. of Key Card Controller along with all accessories to cut off IDU operation whenever guest removes key Card from key Card reader notch. (TOTAL NO. OF ROOMS - 110)
S.I.T.C. OF TPN Distribution Board for ODU Power Supply IP-65 Weather-proof TPN DB/Splitter Board suitable for outdoor installation with 1 no. incoming feeder supplied from from electrical DB & nos. of outgoing feeders as required for each ODU. Incoming feeder shall be sized for Aluminium cable, with MCB/MCCB & indicating lamps, Outgoing feeders shall be with MCB of required rating. Rate should include cabling from TPN-DB to respective VRF ODUs. No. of outgoing feeders shall be as required for the respctive VRF Circuit/ODUs (Qty of DB is equal to no. of VRF circuits) VRF SYSTEM-1 30.0 KW
VRF SYSTEM-2 18.0 KW
VRF SYSTEM-3 38.0 KW
VRF SYSTEM-4 44.0 KW
VRF SYSTEM-5 38.0 KW
VRF SYSTEM-6 40.0 KW
VRF SYSTEM-7 36.0 KW
VRF SYSTEM-8 30.0 KW
VRF SYSTEM-9 46.0 KW
VRF SYSTEM-10 18.0 KW
VRF SYSTEM-11 20.0 KW
VRF SYSTEM-12 12.0 KW
VRF SYSTEM-13 30.0 KW
VRF SYSTEM-14 18.0 KW
VRF SYSTEM-15 12.0 KW
VRF SYSTEM-16 20.0 KW
VRF SYSTEM FOR 8600 CFM AHU - 36.0 KW
VRF SYSTEM FOR 12800 CFM AHU - 48.0 KW
VRF SYSTEM FOR 6000 CFM AHU FOR GATHERING & LOUNGE IDU- 26.0 KW
VRF SYSTEM FOR FOR BANQUET PREFUCTION- 12.0 KW
ELECTRICAL WORK for TFA & Toilet Exhaust S.I.T.C OF ELECTRICAL PANEL AS PER SLD. ALL PANELS SHOULD REQUIRE BMS COMPATIBILITY. PANEL NO M-EP-01 (16.25 KW) PB STATIONS - 5 NOS.
PANEL NO M-EP-02 (32.2 KW) PB STATIONS - 1 NOS.
PANEL NO M-EP-03 (51.5 KW) PB STATIONS - 1 NOS.
PANEL NO M-EP-04 (64.1 KW) PB STATIONS - 2 NOS.
PANEL NO M-VEP-01 (4.4 KW) PB STATIONS - 8 NOS.
PANEL NO M-VEP-02 (5.0 KW) PB STATIONS - 8 NOS.
PANEL NO M-SEP-1 PB STATIONS - 2 NOS.
PANEL NO M-SEP-2 PB STATIONS - 1 NO.
PANEL NO M-SEP-3 PB STATIONS - 1 NO.
PANEL NO M-SEP-4 PB STATIONS - 2 NOS.
S.I.T.C. of Power Cables between starter panel and fan on cable tray - the cable shall be FRLS type - incoming cable and earthing to PANEL shall be scope of electrical contractor. The rate shall include necessary glanding and termination of cables 10 Sq.mm - 4 core 2XFY - For TFA & Toilet Exhaust fan
6 Sq.mm - 4 core 2XFY - For TFA & Toilet Exhaust fan
4 Sq.mm - 3 core 2XFY - For TFA & Toilet Exhaust fan
2.5 Sq.mm - 3 core 2XFY - For TFA & Toilet Exhaust fan / Smoke Evacuation fan
1.5 Sq.mm - 3 core 2XFY - For TFA & Toilet Exhaust fan / Smoke Evacuation fan
2.5 sqmm 7 core copper flexible for push button control - For TFA / Toilet Exhaust fan
2.5 sqmm 7 core copper flexible for push button control - for Smoke Evacuation fan
Power cabling For MSFD panel - for Smoke Evacuation fan
Supply, Installing, Testing and Commissioning and Erecting of Ladder type Hot dip G.I. cable tray of 14G of specific dimensions. The cable tray shall be hung from ceiling / fixed to wall with necessary ceiling suspensors, tee, nots, nuts etc., together with tees, bends etc. including cost for supports as described. The tray shall be earthed. Min size (not a limitation) of supports shall be as follows (a).-up to 300mm tray 2NOS.. 8mm full threaded G.I. rod with 2NOS.. anchor fastener and "C" channel support at 500mm distance (b) 450 to 600mm tray 2NOS..10mm full treaded G.I. rod with 2NOS.. anchor fastener and "C" channel support at 500mm distance (c) 750 / 1000 mm cable tray with fabrication of 25 x 6 or 50 x 3 mm angle frame with min. 4 NOS. anchor fastener at 500 mm distance. 300mm x 50mm
100mmx 50mm
75mmx 35mm
50mm x 35mm
NON VRV - INVERTER TYPE AIR CONDITIONING UNITS Including indoor unit, remote control, in-built drain pump (where specified), panel, electrical cabling, controls, RA filters, etc. complete as required. In case of non-availability of exact specified capacity, quote next higher capacity machine NOTE: Include refrigerant pipes, pipe fittings, GI angles/flats supports, accessories, electrical wiring between indoor & outdoor units, minimum 9mm thick for concealed in wall piping & 13mm thick for exposed piping of Class O nitrile rubber insulation for entire piping system as per Technical Specifications. Exposed refrigerant piping should be with factory laminated 200 GSM glass cloth for UV and mechanical protection and manufacturer recommended adhesive sealant applied at all joints. Refrigerant piping on terrace shall be installed on GI pipe tray, and finally covered with GI sheet cover for protection. UV-protection layer / GC must be applied immediately on installation of pipes without waiting for total completion, to prevent deterioration of insulation due to sun-light. Additional layer of UV paint over GC for all exposed to atmosphere piping for weather protection of pipes & insulation and prevention of rain water ingress. Piping rate should include pressure testing, vacuumising and initial & final charging of refrigerant gas with required top-up quantity as per piping actual length and operating / commissioning parameters 1.5 TR INVERTER Hi wall unit with corded remote Machine installation charges, Inluding piping. Set of refrigerant piping along with insulation & power cabling for above machines / Communication Cable between indoor and outdoor (35 RMT per machine)
2.0 TR INVERTER Hi wall unit with corded remote Machine installation charges, Inluding piping. Set of refrigerant piping along with insulation & power cabling for above machines / Communication Cable between indoor and outdoor (35 RMT per machine)
AMIT N SHAH
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid