Providing and laying Electrical service connection and installation of power points at BSF Primary school at BSF campus Jalandhar under Ftr HQ BSF Pb

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. (a) 2 X 4 sq. mm + 1 X 4 sq. mm earth wire

(b) 2 X 6 sq. mm + 1 X 4 sq. mm earth wire

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required. (a)25 mm

Supplying and drawing 3C x 6 sqmm of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.

Supplying and fixing (4+12) way surface/recess mounting vertical type 415 V , TPN MCB distribution board of sheet steel, dust,protected , duly power coated inclusive of 200 A tinned copper bus bar common neutral link earth bar for mounting MCBsB . (But without MCB and incomer) as required

Supplying and fixing 63 A, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following three poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing 12 way single pole and neutral type, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

Supplying and fixing 40 A rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc,conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioningand protective covering etc,complete as required. 63MM OD 51 MM ID

Supplying and laying of one number 3.5C X 25 Sqmm A2XWY XLPE insulated and PVC sheated aluminium power cable of 1.1 KV grade, in the existing RCC/Hume/DWC /HDPE pipe/open masonary duct/ panel cable ally including connection ,testing etc as required, make KEI/Havells/ Polycab

Supplying and laying of one number 3.5C X 35 Sqmm A2XWY XLPE insulated and PVC sheated aluminium power cable of 1.1 KV grade, in the existing RCC/Hume/DWC /HDPE pipe/open masonary duct/ panel cable ally including connection ,testing etc as required, make KEI/Havells/ Polycab/ RR.

suppliying and making end termination with brass compression gland and aliminium lugs for following size PVC insulated and PVC sheathed/ XLPE Aluminium conductor cable of 1.1 KV grade (a) 3.5 C x 35 sqmm (32 mm)

(b) 3.5 C X 25 sqmm (28 mm)

Supplying and fixing cable route marker with Cable route marker with 10CM X 10 CM X 5 MM thick G.I plate with inscription there on,bolted/welded to 35 mm x 35 mm x 6 mm angle iron, 60 cm long and fixing the same in ground as required.