REPAIR TO EXTERNAL PERIODICAL ROOF TREATMENT PLUMBING AND MISC WORKS OF OFFRS MD ACCN AT KIRBY PLACE UNDER AGE BR I OF GE NORTH DELHI CANTT 10

Amount

M&L for preparation of old decorated external wall surface by sand paper of required sizes , filling in wall care putty in holes existing or created ,again sand papering thus making surface smooth and One coat of cement base paint complete all as specified and all as directed by Engineer in charge .

M&L for preparation of old decorated external wall surface by sand paper of required sizes , filling in wall care putty in potholes existing or created ,again sand papering thus making surface smooth and two coat of cement base paint complete all as specified and all as directed by Engineer in charge .

M&L for preparation of old decorated external wall surface by sand paper of required sizes , filling in wall care putty in potholes existing or created ,again sand papering thus making surface smooth and one coats of weather proofing exterior acrylic emulsion paint complete all as specified and all as directed by Engineer in charge .

M&L for preparation of old decorated external wall surface by sand paper of required sizes , filling in wall care putty in potholes existing or created ,again sand papering thus making surface smooth and two coats of weather proofing exterior acrylic emulsion paint complete all as specified and all as directed by Engineer in charge .

M&L for preparation of old decorated external wall surface by sand paper of required sizes , filling in wall care putty in potholes existing or created ,again sand papering thus making surface smooth and One coat of white wash complete all as specified and all as directed by Engineer in charge .

M&L for preparation of old decorated external wall surface by sand paper of required sizes , filling in wall care putty in potholes existing or created ,again sand papering thus making surface smooth and two coat of white wash complete all as specified and all as directed by Engineer in charge .

M&L 10 mm thick Ready mix plaster on brickwork or concrete surfaces of wall (external surface )finished even and smooth complete all as specified and as directed by engr-in-charge.

M&L for prepration of undecorated surface of wall and applying two coats of cement base paint with one coat primer complete all as specified and all as directed by Engineer in charge .

M&L for prepration of undecorated surface of wall and applying two coats of weather proofing exterior acrylic emulsion paint with one coat primer complete all as specified and all as directed by Engineer in charge .

M&L Taking down cement plaster of any description from brick, stone walls or concrete surfaces including raking out joints, hacking for key,scrubbing down with water , 10 mm thick Ready mix plaster on brickwork or concrete surfaces of wall (external surface )finished even and smooth ,mixed with PD proof 101 LW(+) of Dr fixit or equvalant integral WP admixer @200 ml/bag of cement over two coats of super latex 302 of Dr fixit or equ. in the ratio 1:4: 7 (one part super latex 302, 4 part water and 7 part cement ) @ 1.50 Kg of homogenious mixture per Sqm in two coats and finished the surface even and fair without using extra cement complete all as specified and directed. Note- PD proof 101 LW(+) and super latex 302 shell be measured and paid seperatly

M&L Taking down cement plaster of any description from brick, stone walls or concrete surfaces including raking out joints, hacking for key,scrubbing down with water,and 10 mm thick Ready mix plaster on brickwork or concrete surfaces of wall (internal surface )finished even and smooth in two layers (10mm+5mm ) mixed with PD proof 101 LW(+) of Dr fixit or equvalant integral WP admixer @200 ml/bag of cement over two coats of super latex 302 of Dr fixit or equ. in the ratio 1:4: 7 (one part super latex 302, 4 part water and 7 part cement ) @ 1.50 Kg of homogenious mixture per Sqm in two coats and finished the surface even and fair without using extra cement complete all as specified and directed. Note- PD proof 101 LW(+) and super latex 302 shell be measured and paid seperatly

Supply only PD proof 101 LW (+) of Dr Fixit or equivalent

Supply only super latex 302 of Dr fixit or equivalent

Taking down brick tiles,terracing tiles or single layer APP from roof laid, bedded and pointed in any mortar all as specified & directed.

Demolition of mud phuska/cement concrete in roof any thickness, including plaster and leaping/whether full thickness removed on only a part thereof.

M&L 40 MM thick cement concrete type C-1, 1:3:6 (20 MM graded aggregate as in padding over roof mixed with water proofing compound (WPC shall be measured and paid separately) complete all as specified and directed

M&L 20mm thick screed in CM (1:3) finished even and smooth mixed with water proofing compound (WPC shall be measured and paid separately) complete all as specified and directed

M & L for Water proofing treatment to RCC roof slab, walls, chhajjas etc, shall be carried out as specified below and as directed by Engineer-in-Charge. (A) Preparing plastered surfaces of roof slab, walls, chhajjas etc, by brooming with broom sweeping free from dirt dust etc & evenly applying a coat of approved bituminous primer @ 0.20 Kg/Sqm of area complete all as specified. (B) Laying 3 mm thick APP polymer modified approved membrane, non woven, polyester, weighing not less than 3.5 Kg/Sqm with 10cm side laps and 15cm end lap. as specified & joints sealed and applied complete by torch application method all as specified & directed by Engr-in-Charge. Carrying out test by flooding water for 24 hrs for leakage & seepages and rectifying the same to the entire satisfaction of GE. (C) Finally applying a coat of solar reflective bituminous aluminium paint @ 0.15 ltr/Sqm on the top of membrane surfaces complete all as specified & as directed by Engr in Charge

Disconnecting existing overhead tanks,setting aside or lowered if required for repairing ,cleaning etc and hoisting if reqd reconnecting and refixing in position but capacity exceeding 250 litres and not exc 500 litres complete all as specified & directed.

Disconnecting existing overhead tanks,setting aside or lowered if required for repairing ,cleaning etc and hoisting if reqd reconnecting and refixing in position but capacity exceeding 500 litres and not exc 1000 litres complete all as specified & directed.

Demolition of brick work including all quoins, arches, pillars, etc built in cement mortar.

M&L for brick work in CM (1:6) straight or curved on plan exc 6.0m mean radius and using old size sub class 'B' bricks all as specified.

All as per item above but except bricks

M&L for Brick wor with sub-class "B' Bricks straight or curved on plan to any radius in half brick thick wall built in CM ( 14).

Supply and fixed in repair rotational moulded polyetylene water storage tanks (cylindrical vertical with closed top) of 500 Litres capacity hoisted and fixed in position and connecting up pipes securing access covers all as specified and directed including dismatalling of existing water tank

Demolition of cement concrete( unreinforced ) in ground floors and pavings n.exc 15 cm thicness ( below of above ground level )

M/L PCC 1:4:8, type D2, using 40 mm graded aggregate 75 mm thick as in sub floor, Sub base, floor complete all as specified & directed.

M&L chequerred cement concrete tiles 30 cm x 30 cm x 25 mm thick machine pressed set jointed and pointed with grey Pigments cement & pigments in neat cement slurry in floors set in 15mm thick CM(1:6) including filling joints withwhite or colour cement as directed.

M&L machine pressed precast rubber mould coloured concrete interlocking paver blocks of 60 mm thick any shape and size conforming to IS 15658-2006 ,M-35 grade with grey cement and no pigment over complete all as specified and directed.

M&L sand filling under floors including watering and consolidation.

S&F in repairs fancy type stainless steel curtain rods powder coated polished 20 mm dia incl brackets and finale and connected items complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.

M&L non skid ceramic tiles colored tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm,in floor etc set and jointed in neat cement slurry and pointed in colour cement laid over and including 15mm thick cement mortar screed bed in CM (1:6) complete all as specified and directed.

M&L for Vitrified Ceramic coloured dark shade tiles 10 mm thick (square/rectengular) polished, area of each tile n. exc 0.36 sqm as in floors, set and jointed in neat cement slurry and pointed in coloured cement to match the surface insluding 15 mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L for glazed coloured ceramic tiles in dado/vertical surface (450x300x7mm) thick set and jointed in neat cement slurry and pointed in coloured cement to match the surface including 10 mm thick in cement mortar 1:4 even and fair for receving tiles on vertical surface complete all as specified and directed by Engr-in-Charge.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) of wooden/steel n.exc 1.5 sqm.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) of wooden/steel exc 1.5 sqm but n.exc 4 sqm each

S&F powder coated aluminium window double leaf X 2 (2 leaf glazed & 2 leaf with SS wire mesh ) made of aluminium tubular frame of size 101.60 x 44.40 x1.6 mm and shutter of section 38.10 x 38.10 x 1.60 mm and style fixed openable horizontal and vertical member of aluminium beading rubber gasket of aluminium fittings such as tower bolts, handle stay and rod and hinges, 5 mm thick glass etc and outer frame fixed with aluminium grill of thickness 4 mm and aperture 60 x60 mm on U channel with complete all as specified and directed ( Note : Fixtures / fittings of window shutter are deemed to be inclusive in the quoted rate).

M&L 40 mm thick, plain framed, flush shutters with block board core and plywood face panel , commercial type both sides complete all as specified and directed.

S&F 35mm thick 2nd class HW glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc(with out sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, gauze etc size of members as specified in SSR part-I, section 8, clause 8.24(a)

S&F galvanised mild steel wire clothcut to size, 0.56 mm nominal dia wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staple complete all as specified .

M&L for two coats of synthetic enamel paint on new wooden painted surfaces including preparation of surfaces of any description not otherwise descriped over 10 cm width or grith complete all as specified and directed.

S&F Solid PVC Door frameof size 50mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, Supplying & fixing in opening as per specification and drawing.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & Bottom rails. MS frames shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Paneling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement.

Taking down 15 mm dia steel tubing and connection complete all as specified

Taking down 20 mm dia steel tubing and connection complete all as specified

M&L for steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore 15 mm complete all as specified.

S&F steel water tubing medium grade galvanised with all fittings including short lengths, laid in trenches complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore dia 20 mm complete all as specified.

S&F in rep stop valve, cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 20 mm bore complete all as specified.

S&F in repair water closet squatting pan ``Orissa pattern`` 580 mmx440 mm, white with integral foot rests including fixing of flushing cistern, connection to trap, anti syphonage pipe etc complete all as specified including provision of lime concrete. bedding.

S&F in repairs vitreous China wash basin, white, flat back, padestal patern size 550x400mm including tap, chain, plug brackets, waste fitting 32mm dia ,brass chromimium plated for glazed ware sink, basin,with long screwed shanks and fly nuts flange end bedded in red lead cement and other end fixed complete all as specified.

S&F PVC low level flushing cistern 10 ltrs capacity incl PVC float valves, PVC connection and out let pipes complete all as specified and directed.

S&F in repair 15mm bore Bib cock with long thread, chromium plated , with long body, wall flange screwed for iron pipe or for brass ferrule and fixed to 15mm bore pipe complete all as specified.

S&F in repair angular stop valve cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed for 15mm dia pipe, all as specified. ISI marked.

S&F in repair Bib tap cast copper alloy with crutch or butter fly handle, screwed down, screwed for iron pipe of size 15mm bore chromium plated. all as specified

S&F in repairs Chromium plate tubular towel rail, 20mm dia, D type, 60cm long between flanges . all as specified.

S&F PVC connections 15 mm size with PTMT nuts of length 450 mm.

S&F in repairs plate rack made of stainless stee, 600 x 750X0.55mm including fixing as per manufacturers instruction. all as specified.

S&Fin repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar including fixing cantilever brackets connecting union to pipe and 32mm dia GI pipe duly painted upto Nihani Trap or Floor trap complete as directed at site, overall size 915mmx460mm bowl size 410mm x 330mm x160mm. all as specified.

S&F MS butt hinges medium weight cold rolled 100mm long

S&F Aluminium anodised barrel tower bolt of extruded section and fixed lengtth of bolt 150mm.

S & F Aluminium handle,cast type anodised size of handle 150mm.

S&F in repair for Gypsum ceiling board for ceiling prepainted, perforated finish, 600 x 600 x 9 to 9.5mm thick in size, of approved brand/make, laid over and including grid work of size 600 x 600mm, made out of 0.5mm thick G.I. tee 32 x 24 mm for main, 25x24mm for cross tee and 20 x 20mm angle fixed on wall, powder coated finish on exposed faces of tee and angle. hung from ceiling using 2 mm thick G.I. Suspension wires spaced at 1200 mm on main runners including making niches for fans/light at as specified and directed.

S&Fin repairs CP mixer pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, mixing 'Hot' or 'Cold' water with long screwed shanks and fly nuts, screwed for iron pipe and fixed of bore dia 15mm.

S&F in repair elegent mirror PVC cabinet with towel rail of size 450x600x150 mm all as specified

S&F in repairs snow white vitreous china EWC single peice type 700X370X645 mm incl seat cover and flush fittings complete fixed in floor with brass screw complete all as specified and directed by Engr-in-Charge

S&F in repairs shower rose fancy type bass chromium plated 125 mm heavy duty pattern with swivel joints type screwed for 15mm bore including jointing to pipe or unions complete all as specifed and directed.

S&F in repair CP hand spray (health faucet with 1.5 M long easy flex tube in chrome finish and wall hook) complete all as specified and directed.

S&F in repair 2 in 1 Angle Valve 15 mm CP fancy pattern type cast copper alloy screwed for iron pipe or forbrass ferrule and fixed all as specified and as directed

S&F in rep chromium plated jet for WC with 1.00 M long PVC pipe including necessary fittings complete all as specified and directed.

S&F 110 mm bore PVC (SWR) Pipes single socket or with rubber ring, fixed to walls or in any position including taking down old damaged pipes complete all as specified and directed.

S&F PVC(SWR) bends plain 110mm bore complete all as specifed and directed.

M&L 15 mm thick Ready mix plaster on concrete surfaces of chajja lining of roof , projection over windows,etc as per site requirement (external surface ) of avg girth approx 50 cm finished even and smooth complete all as specified and as directed by engr-in-charge including taking down of broken chajja complete all as specified and directed.

M&L for chipping of spalled and loose concrete and cleaning rust from re-inforcement by sand blasting, scrubbing down conrete sufrace with wire brushes cleaning with water allowed to dry and applying a layer of zinc rich epoxy primer as antirust on all exposed reinforcement followed by a layer of bonding coat of approved epoxy adhesive on complete exposed surfaces of concrete to be gunited all as specified and applying two layess of guniting over steel welded mesh 2mm dia of wire and aperture 75mm,total thickness of gunite n.exc 25mm thick (average thickness) in cement mortar 1: 2 using OPC 53 grade cement mixed with polycrete admixture @ 2% by weight of cement or as per manufacturers instructions and finally applying cement plaster over gunited surface of required thickness to give even, uniform and smooth finish conforming to proper gerometrics in cement mortar ( 1 : 3) to match with the existing surface as in sides and soffits etc of slabs, chajjas, fins, facias, parapets , columns and beams etc complete including necessary scaffolding, shuttering, necessary chases to brick work or RCC members at any height upto 4 storey bldgs all as specified. (Note : Steel welded mesh is to be tightend / welded with the existing re-inforcement. The cost of welded mesh is deemed to be included in the unit rate quoted by the contractor).

Taking down cement or cement plaster on brick walls/ceiling etc including raking out joints, hacking for key, scrubing down with water etc complete all as specified and directed.

M&L 10 mm thick Ready mix plasteron brickwork or concrete surfaces of wall (internal surface )finished even and smooth complete all as specified and as directed by engr-in-charge.

M&L 5 mm thick Ready mix plaster on brickwork or concrete surfaces of wall (ceiling )finished even and smooth complete all as specified and as directed by engr-in-charge.

M&L preparation of newly plastered surface on walls and applying two coat of Oil Bound Distemper over a coat of primer complete all as specified and directed.

M&L for preparing newly plastered surfaces of ceilling and applying three coats of white wash complete all as specified and directed.

M&L for 18 mm thick PVC sheet for kitchen cabinet and cubboard consisting of carcass one side decorative lamination and other side balancing white fixed with approved adhesive and self tapping screws for kitchen cup board or wardrobe all as specified and directed

M&L for 6 mm thick PVC sheet for kitchen cabinet and cubboard consisting of carcass one side decorative lamination and other side balancing white fixed with approved adhesive and self tapping screws for kitchen cup board or wardrobe all as specified and directed

S&F for 20 mm wide & 1mm thick PVC EDGE BENDING pasted to edges of PVC furniture with suitable adhesive for kitchen cup board or wardrobe complete all as specified and directed

S&F stainless steel handle 100 mm fancy type for cub board shutter complete all as specified and directed

S & F Soft close heavy duty slow motion hinge steel nickel plated, 4 hole mounting plate, half overlay adjustment height/ depth fixed in repair completed all as specifed and directed.

S & F soft close heavy duty steel nickel plated telescopic drawer channel size 20 inch full extension load capacity 50 Kgs including fixing arrangement to drawer/ baskets etc completed all as specified and directed.

S & F mild steel magnetic catches and striking plate of 50mm size for kitchen cup board or wardrobe fixed with screw including letting in and fixed completed all as specified and directed.

Dismantaling of existing boarding including fitting fixture etc.

Sch of Credit- Total contract sum shall be calculated after deduction of Sch of Credit amount Credit amount - 26,280.00

QUALITY CONSTRUCTIONS CO

ANSH VANSH CONSTRUCTION COMPANY

DEEP ASSOCIATES

M/s Amit Brothers

The new hut furnitures

M/S Blues Developers Pvt. ltd

RASTOGI BUILDERS