COMPREHENSIVE AND WELCOME MAINTENANCE TO

Amount

Material and labour for Preparation of old decorated surfaces (plastered/ unplastered) of walls/pillars /cornices by removing / scraping down all loose particle, smoke soot, moulds, moss & efflorescent salts, oil & greasy spots etc with using broom / steel patti / wire brush / sand papering or by any other mean including applying white cement based putty where required for filling to depressions/nail holes/light cracks etc and to make the surface even and smooth upto entire satisfaction of Engineer-in-charge and after preparing the surface smooth applying one coat of white wash with using paint brush complete all as specified and as directed.

Material and labour for Preparation of old decorated surfaces (plastered/ unplastered) of ceiling by removing / scraping down all loose particle, smoke soot, moulds, moss & efflorescent salts, oil & greasy spots etc with using broom / steel patti / wire brush / sand papering or by any other mean including applying white cement based putty where required for filling to depressions/nail holes/light cracks etc and to make the surface even and smooth upto upto entire satisfaction of Engineer-in-charge and after preparing the surface smooth applying one coat of white wash with paint brush complete all as specified and as directed

Material and labour for preparation of old decorated surfaces (plastered/unplastered) of walls/pillars /cornices by removing / scraping down all loose particle, smoke soot, moulds, moss & efflorescent salts, oil & greasy spots etc with using broom / steel patti / wire brush / sand papering or by any other mean, washing down with water including applying white cement based putty where required for filling to depressions/nail holes/light cracks etc and to make surface even and smooth upto entire satisfaction of Engineer-in-charge, and after preparing the surface smooth applying one coat of cement base paint with paint brush or roller brush, as per existing or as approved tint/colour complete all as specified and as directed .

Material and labour for preparation of old decorated surfaces (plastered /unplastered) of walls/pillars /cornices by removing / scraping down all loose particle, smoke soot, moulds, moss & efflorescent salts, oil & greasy spots etc with using broom / steel patti / wire brush / sand papering or by any other mean, including applying white cement based putty where required for filling to depressions/nail holes/light cracks etc and to make the surface even and smooth upto entire satisfaction of Engr-in-charge, and after preparing the surface smooth applying one coat of oil bound distemper (washable) as per existing or as approved tint/colour complete all as specified and as directed.

Material and labour for complete removal of existing treatment (any layers of existing treatment ) from walls/pillars/cornices by scraping down with using steel patti wire/ brush / sand papering or mechanical sander machine (including provision of dust sucking) upto entire satisfaction of Engineer-in-charge, remove / scraping down all loose particle, smoke soot, moulds, moss & efflorescent salts etc brooming all dust and preparing the surfaces and after applying two coats of oil bound distemper (washable) over a coat of alkali resistance primer and wall care putty as per approved tint/colour by using electric paint roller or roller brush complete all as specified and as directed. NOTE : - Each stage i.e after complete removal and before applying OBD as specified above, the surface shall be passed in writing by the Enigineer-in-charge.

M&L for preparation of old decorated surfaces of wood work exc 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old decorated steel surfaces exc 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old decorated surfaces of wood work of any description and applying one coat of varnishing complete all as specified and directed

Material and labour for preparation of old surfaces (plastered/unplastered) of walls/pillars /cornices by brooming down or steel wire brushing, scraping down smoke soot, moulds, moss & efflorescent salts, oil & greasy spots etc including applying white cement based putty where required for filling to depressions to make the surface even and smooth by using sander machine (with provision of dust sucking) upto entire satisfaction of Engineer-in-charge, after preparing the surfaces applying one coat of weather proof exterior emulsion paint as per existing or as approved tint/colour complete all as specified and as directed

Material and labour for preparation of old painted (plastered/ unplastered/concrete) surfaces of any description over 10cm girth or width, not otherwise described of walls/pillars /cornices by removing / scraping down all smoke soot, moulds, moss & efflorescent salts, oil & greasy spots etc with using broom / steel patti / wire brush / sand papering or by any other mean as required, upto entire satisfaction of Engineer-in-charge after preparing the surfaces applying two coats of plastic emulsion paint, interior emulsion incl one coat of birla care putty (finishing smooth and glossy upto entire satisfaction of Engineer-in-charge) as per approved tint/colour with using paint brush/roller brush complete all as specified and as directed.

Material and labour for Preparation of old decorated surfaces (plastered/ unplastered) of ceiling by removing / scraping down all loose particle, smoke soot, moulds, moss & efflorescent salts, oil & greasy spots etc with using broom / steel patti / wire brush / sand papering or by any other mean including applying white cement based putty where required for filling to depressions/nail holes/light cracks etc and to make the surface even and smooth and also using sander machine (with provision of dust sucking) on uneven surface to make the surface even and smooth (before and after applying putty as per site situation) upto upto entire satisfaction of Engineer-in-charge and after preparing the surface smooth applying one coat of OBD with paint brush complete all as specified and as directed.

Taking down old cement plaster including racking out joint hacking for keys and scrubbing down with water etc., on wall surfaces and including all as specified and as directed.

M&L for rendering 15mm thick in CM 1:6, finished even and smooth without using extra cement all as specified and directed.

M&L for rendering 10mm thick on brick/ concrete surfaces with CM 1:4, finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 5mm thick in CM 1:3, finished even and smooth without using extra cement all as specified and directed.

M&L for preparation of newly plastered surfaces and applying two coats of OBD over a coat of alkali resistance primer on wall complete all as specified and directed

M&L for preparation of newly plastered wall surfaces and applying two coats of cement based paint on wall all as specified and directed

M&L for preparation of newly plastered surfaces and applying three coats of white wash on ceiling/ facia complete all as specified and directed

Demolition of stone slab of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar complete all as specified and as directed.

M&L 18 to 20mm thick granite slab machine cut bedded jointed and pointed with white cement slurry incl cutting & Polishing of type white marble complete all as specified and as directed.

Rounding the edge of granite slab in any given situation all as specified and as directed.

S&F in repairs vitreous China pedestal pattern white,(excluding flushing cistern and flush pipe) including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete all as specified and directed.

S&F in repairs Plastic water closet seat, any colour closed pattern with recessed bottom, & cover & mild steel CP or aluminised hinging device complete all as specified and directed.

S&F in repairs PVC over head tank cover for any capacity

S&F in repair PVC low level cistern 10 Ltr cap PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and flush pvc pipe of low or high density or PVC 32 mm dia for low level cistern.complete all as specified and directed

S & F in repairs health faucet including accessories complete all as specified and directed

S&F in repair Vitreous China Wash basin, white, flat back, size 550 x400mm excluding taps, chain and plug and porcelain stopper and fixing on existing brackets complete all as specified and directed

S&F in repairs PVC connections 15mm dia 600mm long (for cold/hot water connection with brass or PTMT flynuts and washer at both ends all as specified and directed

S&F in repairs 125mm size brass chromium plated shower rose with swivel joints and shower arm complete all as specified and directed.

S&F in repairs flush pipe of polyethylene of low or high density or PVC 32 mm dia, for low / high level flushing cistern all as specified and directed.

S& F for Brass 3 in 1 CP mixer for mixing hot & cold water screwed down for iron pipe bore 15 mm and fixed complete all as specified and directed

S&F in repairs Internal componants part (except PVC body) of PVC Flushing cistern 10 Ltr capacity incl ball valve etc complete (Flush Kit) all as specified and directed.

S&Fin repairs Toilet paper holder of brass CP fixed with brass screws all as specified and directed.

S & F in repairs sink with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs washers and wastes including fixing camber brackets and connecting union to pipe overall size 915 mm x 460mm bowel size 410mm x 330x 160mm complete all as specified and directed.

S & F in repairs Kitchen plate rack made of stainless steel not less than 1mm thick with fixing acessories, overall size 600mm x 750 mm complete all as specified and directed.

S&F in repair rotational moulded polythene water storge tank any colour triple layer (Cylindrical vertical with closed top) hoisted and fixed in position all as specified of 500 ltr capacity including dismantling old water tank and remove from site complete all as specified and directed.

S&F in repairs rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted & fixed in position all as specified in SSR Part I 1000 Ltrs Capacity incl. including dismantling old water tank and remove from site complete all as specified and directed.

Taking up or down 15mm bore PVC tubing/GI steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed

All as per item 39 above but 20mm bore GI/PVC tubing.

All as per item 39 above but 25mm bore GI/PVC tubing.

S & F UPVC pipes pressure rating 10 kg/ sqcm, 25mm bore ISI marked with all fittings and fixed to wall , ceiling or laid in floor complete all as specified and directed.

S & F UPVC pipes pressure rating 10 kg/ sqcm, 20mm bore ISI marked with all fittings and fixed to wall , ceiling or laid in floor complete all as specified and directed.

S & F UPVC pipes pressure rating 10 kg/ sqcm, 15mm bore ISI marked with all fittings and fixed to wall , ceiling or laid in floor complete all as specified and directed.

Supply and fixing in repair PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

Supply and fixed in repairs 15mm bore bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repair 15mm bore cast copper alloy chromium plated angle cock with long shank & cup concealed typecomplete all as specified and directed

Supply and Fixed in repairs 15mm bore Stop valves, cast copper alloy, fancy type, chromium plated with long shank and cup screwed down high pressure , screwed both ends for iron pipe or for unions complete all as specified and directed

Supply and fixed in repairs 15mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plqated, fancy type, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed

S&F in repairs 15 mm dia Bip tap standard PTMT any colour screwed for iron pipe (Min weight 90 gms) all as specified and directed.

Supply and Fixed in repair brass chromium plated tublar towel rail 20mm dia and 60 cm long including brass chromium plated brackets of type 'D' long between falnges complete all as specified and directed.

S&F in repairs Ball valves 20mm bore high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe & fixed. (min. weight 20mm-210 gms) complete all as specified and directed

S&F in repairs Ball valves 25mm bore high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe & fixed. (min. weight 25mm-455gms) complete all as specified and directed

Dismantling cast iron pipes/PVC pipes of any dia and any description including all fittingscomplete all as specified and directed

M & L for PVC (SWR) pipes 110mm single socketed, in any length with rubber ring joints, fixed to walls, complete all as specified and directed

M & L for PVC (SWR) pipes 75 mm single socketed, in any length with rubber ring joints, fixed to walls,complete all as specified and as directed.

S&F in repairs Toilet cabinet mirror of size 450x300mm with all fittings and complete fixed to wall.

S&F in repairs brass, chromium plated soap dish fixed to walls with chromium plated brass screws

S&F in repairs 5-8mm thick acrylic corner shelf of 300mm radius with chromium plated grills and guide bars complete all as specified and directed.

S&F in repairs chromium plated PVC health faucet with 1 mtr PVC tubing covered by CP coated rings completed.

S&F in repair brass chromium plated tubular towel rails 20mm dia D type 60cm long between flanges complete all as specified and directed.

M & L for PVC (SWR) bends 110 mm any radius, complete all as specified and as directed.

M & L for PVC (SWR) bends 75mm any radius, complete all as specified and as directed.

S&F PVC grating square or circular fitting of size 100 mm with hole etc complete all as specified and as directed.

Taking down chowkhats or frame with shutter (without taking off shutter from the frame) exc 1.5 Sqm but not exc 4 Sqm each and removal from site, all as specified & directed.

Taking down shutters of any description exc 1 Sqm but not exc 2 Sqm each and removal from site & directed .

Resecuring and easing & adjusting without taking down shutters of any description exc 1 Sqm and not exc 2 Sqm each including all fittings all as specified and directed.

S&F 2nd class Hard wood plain, solid, straight chowkats and frames wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joint incl tarring complete all as specified and as directed

S&F 2nd class hard wood plain framed panelled shutter 35 mm thick (any number of panel) with panels of timber flat on both sides (feather edged) or of veneered particle board medium density, wood particle board with commercial face veneers of ply wood commercial type all as specified and directed.

S&F 2nd class Hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats all as specified and directed.

S&F flush shutter 30mm thick Solid core construction with Block board and plywood face pannels, commercial type on both sides all as specified and directed.

Taking down PVC chowkats/Frames of area not exc 1.5 Sqm with shutter (without taking off shutters from the frame) each all as specified and directed.

S&F Solid PVC Door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in opening as per specification & drawing all as specified and directed.

S&F Factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tube for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the style & rails with suitable PVC sheet beading, and jointed together with solvent cement,supplying & fixing in the frame at site as per specification and drawing all as specified and directed.

S&F in repairs SS Butt hinges 100 mm , medium weight, cold rolled all as specified and directed.

S&F Extruded Aluminium alloy handle fabricated type, anodised of size 100mm all as specified and directed.

S&F Extruded Aluminium alloy handle fabricated type, anodised of size 150mm all as specified and directed.

S&F Aluminium anodised barrel tower bolt of extruded section of size 100mm all as specified and directed.

S&F Aluminium anodised barrel tower bolt of extruded section of size 150mm all as specified and directed.

S&F MS barrel tower bolts stove enamelled black with bright bolt, 200mm length all as specified and directed.

S&F MS sliding door bolt, plate type stove enemelled black with bright bolt not less than 12mm dia length of bolt 300 mm including a minimum of 6 bolts, nuts and washers all as specified and directed.

S&F in repairs floor door stopper 140 mm long of aluminium alloy body and tongue, anodised with hard drawn steel spring in floors all as specified and directed.

S&F 18/19mm thick plywood, grade, BWP, type BB fixed with screws to timber frame work including wooden beading/ fillets all-round etc., complete all as specified and as directed.

S&F in repairs 18/19 mm thick plywood, grade BWP, type BB fixed in cupboard shelves, partitions etc., including wooden beading/ fillets all-round etc., complete all as specified and as directed.

S&F in repair pre laminated particle board 18/19 mm thick interior grade prelaminated one side with decorative choice lamination and other side balancing white lamination with lipping as in pelmet boxes all as specified and as directed

S&F 18/19 mmm thick colour solid PVC prelaminated board fixed to timber fram work as in cup board shutter/shelves, pelmet box and similar items fixd in repair complete all as specified and directed.

S&F Auto closing hinges 35mm of 0 Crank (KH-001 or 8 Crank (KH-002) openable at 110 degree for kitchen cabinet shutters

S&F Ball bearing runners 45mm Telescopic (KTS-20) full extension load capacity 50 Kgs fixed in repair complete as specified and diected.

S&F Chromium plated stainless steel wire basket (AISI 304 grade) non magnetic multilayer feuba nickel chrome plated for multipurpose utensils continer with (storage basket) pull out type for large utensils size 480x500x150 mm of Grade 304 with necessary fixing clips etc fixed in repair complete all as specified and directed.

S&F Chromium plated stainless steel wire basket (AISI 304 grade) non magnetic multilayer feuba nickel chrome plated for multipurpose utensils continer with (Cup and Saucers Basket)) pull out type,size 380x500x100 mm of Grade 304 with necessary fixing clips etc fixed in repair complete all as specified and directed.

S&F Chromium plated stainless steel wire basket (AISI 304 grade) non magnetic multilayer feuba nickel chrome plated for multipurpose utensils continer with (Plate Basket)) pull out type,size 380x500x100 mm of Grade 304 with necessary fixing clips etc fixed in repair complete all as specified and directed.

S&F Chromium plated stainless steel wire basket (AISI 304 grade) non magnetic multilayer feuba nickel chrome plated for multipurpose utensils continer with ( Cutlery Basket)) pull out type,size 380x500x100 mm of Grade 304 with necessary fixing clips etc fixed in repair complete all as specified and directed.

S&F Chromium plated stainless steel wire basket (AISI 304 grade) non magnetic multilayer feuba nickel chrome plated for multipurpose utensils continer with ( Grain Trolley Basket)) pull out type,size 380x500x100 mm of Grade 304 with necessary fixing clips etc fixed in repair complete all as specified and directed.

S&F Chromium plated stainless steel wire basket (AISI 304 grade) non magnetic multilayer feuba nickel chrome plated for multipurpose utensils continer with ( Bottle Pull out Basket)) pull out type Two self,size 380x500x100 mm of Grade 304 with necessary fixing clips etc fixed in repair complete all as specified and directed.

S&F in repair mortice lock of mild steel vertical type of size 150mm 6 Lever

S&F in repairs door closer, aluminium (extruded section body) hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and weight between 61 to 80kG

S&F continuous piano hinges mild steel bright finish or electrogavanised with flaps 30mm ( when open ) wide complete all as specified.

S&F 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified and directed

S&F in repairs SS class of 20/25mm dia for curtain rod with fixing with bracket stoper rollers etc as in repair.complete all as specified and directed

Hacking out old broken glass from metal frame of any thickness incl punching or drilling out old glazing pin/springs clips and providing and fixing new ones, all as specified and directed

S&F sheet glass 4mm thick ordinary quality & glazing with oil putty in square n.exc 0.5 Sqm in each pane at any height and any story all as specified and directed.

S&F sheet glass 4mm thick frosted quality & glazing with oil putty in square exc 0.5 Sqm in each pane at any height and any story all as specified and directed.

S&F for stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with galvanised wire staples complete all as specified.

S&F in repair for stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with galvanised wire staples complete all as specified.

M&L for preparation of new or previously untreated steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint over a coat of red oxide primer complete all as specified and directed

M&L for preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of Pink primer complete all as specified and directed

S & F in repairs corner galss of 5.5 mm thick sheet glass with stainless steel brakets complete all as specified.

S&F for Powder coated for aluminium Powder coated frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

S&F for Powder coated aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified.

S&F for Powder coated aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, etc. complete all as specified.

S&F for Powder coated aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle all as specified and directed.

S&F in repair aluminium powder coated grills (pattern DG-104) weight of 2.00 to 3.20 Kg/Sqm for windows, ventilators, etc including jointing, cleats etc and fixed with medium screws into walls / frame work etc complete all as specified and as directed

Dismantling floor hearth or wall tiling incl cement mortor bedding (but not backing) removing the rubbish of the premises all as specified and directed

Demolition of PCC floors and pavings exc 15cm thickness ( below or above ground level ) all as specified and directed

M&L PCC 1:2:4, type B1 using 20mm graded stone aggregate 25mm thick as in levelling course with and including using water proofing liquid as per manufacturer recommendations all as specified and directed

M&L Non skid ceramic coloured tiles 6-7 mm thick (square/rectangular) area of each tile exc 0.06sqm but n.exc 0.11Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed plaster in CM 1:6 all as specified and directed.

M & L glazed ceramic coloured tiles of size 300x450x7 mm thick on vertical surface as in dados, skirting etc, set and jointed in neat cement slurry over and including 10mm thick plaster in cement mortar 1:4, pointed with white/ coloured cement to match complete all as specified and directed

M&L non skid ceramic coloured tiles 7 to 8 mm thick (Square/ rectangular ) in floors ,area of each tile exc 0.11 sqm but n.exc. 0.18 sqm set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tiles, over and including 15 mm thick screed plaster in CM 1:6 complete all as specified and directed by Engr In Charge

All as per item No 118 but in vertical surfaces set set and jointed in neat cement slurry over and including 10mm thick plaster in cement mortar 1:4, pointed with white/ coloured cement to match complete all as specified and directed

M&L for vitrified ceramic coloured tiles light shade 10 mm thick (square / rectengular) polished area of each tile n exceeding 0.36 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1 :4 in floors etc complete all as specified and as directed.

All as per item No 120 but in vertical surfaces set set and jointed in neat cement slurry over and including 10mm thick plaster in cement mortar 1:4, pointed with white/ coloured cement to match complete all as specified and directed.

SINI PROMPT

vrk constructions

Varsa Constructions

M R Govinda Reddy and Sons