Construction of Library at ward no 30 in Paramakudi Municipality

Earth Work Excavation for Foundation in all soils and sub soils and to full deth as may be directed except in hard rock requiring blasting inclusive of shoring , shuttering bailing out water wherever neccessary refilling the foundation with excavated earth other than sandy soil in layers of not more than 150mm thick layers well rammed and depositing the surplus earth l within thecompound in place as shown by the departmental officers with initial lead and lift, clearing and levelling the site etc complete

Foundation

Plinth beam

PCC in 1:4:8[1cement and 4 sand 8 course aggregate] using with 40mm H.B.G. Jelly including dewatering if found necessary and laid in layersof not more than 15cm thick and compacted etc finishing curing ,cost of materials, conveyance and all other labour charges etc., complete complying with standard specification

Centering for soffits of RCC slabs of plane surfaces like lintels beams etc including strutting 3.00m high using mild steel sheets of size 90cmx 60cmand BG10 stiffened with MS angles of size 25mmx25mmx3mm laid over silver oak [cw] joist of size 10cmx6.5cm[spaced at about 90cm c/c]and supported by casurina props of 10cm to13cm dia[spacedof 75cmc/c of all RCC works , excluding cost of materials and all other labour charges etc., complete complying with standard specification

Column

Plinth beam

Slab and Beam

Providing and laying in position Standardised Concrete Mix M-20 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 325Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of sand, but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers - The Coarse and Fine aggregates to be used should comply with the requiremnents of IS staandards. (No separate payment will be made by the Department for the excess usage of materials)

Upto Basement

Above Basement

Supplying and fabricating and placing in position MS or RTS bar for reinforcement to all RCC works as per the design given including cost of steel and binding wire also in all floors and all other labour charges etc complete complying with standard specification

Brick work in CM 1:5 (one cement & five sand) using II class ground moulded bricks of size 9"X43/8"X 2 3/4" including finishing, curing, etc., complete complying with standard specification

Upto Basement

Above Basement

Supply and fixing of M.S Grills with Doors and Windows with one coat of Red oxide with Primer including all costs such as welding,grinding and fabrication charges, cost and conveyance of all materials to site etc,complete as per standard specification.

Plastering with cement mortar 1:3,10 mm ,thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications (S.I.306)

Plastering with cement mortar (1:5) 12mm ,thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications (S.I.306)

Weathering Course with concrete broken brick jelly 20mm guage in pure slaked lime[no sand to be added[ over roof slab the proportion of brick jelly to lime being 32 to12.5 mm well beated with wooden beats for giving required slope and thickness as directed by the departmental officers. etc mortar and mix with brick jelly including to of finish with red tiles and cement pointing etc complete complying with standard specification.

Finishing the top roof with 1 course of machine Preesed tiles of 20mm thick[average] of approved quality cm 1:3 12mm thick mixed with WPC at 2% by weight of cement used and top pointed with the same mortar including well curing and all other labour charges etc complete complying with standard specification

Paving the floor with Vitrified Marbonite tiles of approved quality and colour of size 600x600x8mm thick of approved make, quality and colour in all floors over a base layer of cement mortar 1:3(one cement three sand) 20mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40kg/m2 laid without any air gap in the tiles neatly and fixing in position as per standard specifications and as directed by the departmental officer. The colour & quality of tiles should be got approved by Municipal Engineer before use on work

Painting two coats with ready mixed Plastic Emulsion Paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification.

Supplying and fixing of 6 way SP DB of 16 A/way with 16Amps DPIC Switch with metel clad of of 500 V with fuse and neutral ( Side handle) on Suitable TW Box PWD Earthing. (SD 149)

Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated unsheathed single core copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessoires with TW switch box and 5A FT switch in flush with wall with 3mm thick hylum sheet cover for making good of the concealed portion with suitable colour for PVC concealed light point / fan point (for electronic regulator) (SD 25)

Light point

Fan point

Wiring with 2x1.5 sq.mm (22/0.30)PVC insulated SC unsheathed Cu. Conductor of 1100V grade in Suitable PVC Rigid Pipe Consealed in Wall and ceiling with PVC accessories in flush with wall with 150nnx100mmx113mm TW switch box with 3 mm thick hylum sheet cover for 5 A 3 pin non inter locking CS Plug with continious earth wire connection of 14 SWG TC wire and making good of the consealed portion with suitable colour for conealed PVC Plug Point SD 37

Supply and fixing of 1200 mm (48") AC ceiling fan complete with stepped electronic 300W regulator with 1 1 meter down rod on the existing clamp.

Supply and fixing of 4' 18W crystal Glass LED Tube Light fitting (Havells/ Equivalent)including all cost and conveyance of labour charges and materilas... etc complete

Supply and Run of 2 of 6 sq.mm. (84/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection by 2.5 sq.mm. PVC insulated SC unsheathed copper wire with painting of suitable colour.SD 431

Provision for GST 18 %