8282/E8

Amount

Demolition of brick work built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

Demolition of Plain cement concrete (un-reinforced) in ground floors and pavings n.exc 15 Cm thickness (below or above ground level) complete all as specified and directed.

Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water complete all as specified and directed.

Dismantling fencing wire mesh any type complete all as specified and as directed.

Demolition of Reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Dismantling stone slab or tiles of any description and thickness laid dry or laid dry and pointed complete all as specifieda nd as directed.

Material and Labour Plain cement concrete 1:3:6 type C2 (using 40 mm graded crushed stone aggregates) as in foundation, filling and mass concrete complete all as specified and as directed.

Material and Labour Plain cement concrete 1:2:4 type B1 (using 20 mm graded crushed stone aggregates) as in surface channel and drain including necessary formwork complete all as specified and as directed.

Material and Labour RCC (1:1.5:3) type A1 (using 20 mm graded crushed stone aggregate) as in coloumn, pillar, pier, posts and struts complete all as specified and directed.

Material and Labour Precast RCC (1:2:4) type B1 (using 20 mm graded crushed stone aggregate) as in cover slabs for manholes / gully traps / drain etc set in cement mortar (1:4) complete including necessary form work complete all as specified and directed . Note: (i) Necessary form work shall deemed to be included in quoted rates. (ii) Reinforcement shall be measured and paid separately under relevant item of these schedule.

Material and Labour Brick work with fly ash bricks of designation 7.5, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed

All as above Item No.12.00 here-in-before but except bricks. Note:- Servicable bricks will be obtained from Item No. 1.00 mentioned here-in-before.

All as above Item No.12.00 here-in-before but half brick thick walls in cement mortar 1:4, straight or curved on plan to any radius.

Material and Labour Plain cement concrete 1:2:4 type B0 (using 12.5 mm graded crushed stone aggregates) as in coping, benching complete all as specified and as directed.

Materials and Labour Use and waste formwork , rough finished flat surfaces of concrete, square or rectangular or polygonal to sides of pillars, posts, struts and piers, columns and stanchions etc complete all as specified and as directed.

Supply only PVC coated MS galvanised Chain link fencing with straining bolts and binding wire complete all as specified and as directed. Note:- Line wires shall be measured and paid separately under relevant items of these schedule.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and as directed.

Supply and fix Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) including taking down old unserviceable barbed wire complete all as specified and as direcetd.

Supply and fix Mild steel work in posts and struts and flat iron in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed.

Material and Labour for Mild steel framed work such as grills, gratings, gates etc., with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bar, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe-410-0 Gde E-250 complete all as specified and directed.

Supply Only Mild steel TMT bars 10mm dia including binding with mild steel wire ( annealed) not less than 0.90mm dia complete.

Supply and Fix Mild steel screw bolts ( Machine made) with hexagonal or square heads at one end and screwed at other end, each screwed end to be fitted with one hexagonal or square nut and one washer, length of bolt n.exc 5 Cm and dia 11mm to 15mm complete all as specified and as directed.

Supply and fix Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed by Engineer-in-Charge.

Supply and fix Mild steel TMT bars 6mm to 8mm dia , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed by Engineer-in-Charge.

Supply and fix Mild steel TMT bars but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed by Engineer-in-Charge.

Materials and Labour 75mm thick plain cement concrete type C2 ( 1:3:6, using 40mm graded crushed stone aggrgates) as in plinth proction finished even and smooth without using extra cement complete all as specified and as direcetd.

Materials and labour 100 mm thick, plain cement concrete 1:2:4, type B-2 (using 40mm graded stone aggregate) as in pavings or path and hardstanding and finished the surface even and smooth without using extra cement complete as specified and directed.

Materials and Labour Pre polished Chequered cement concrete tiles of size 300mm x300mm x25mm thick, with grey cement and no pigment, jointed in neat cemnt slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and as directed.

Materials and labour PCC Kerb stone of size 400x300x125 mm with plain or interlocking joints, jointed and setting in cement mortar 1:6 including demolition of old unserviceable kerb stone complete all as directed by Engineer-in-Charge.

Materials and Labour 60mm thick Machine pressed precast conctete interlocking paver block with grey cement and pigment of any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as specified and as directed including 50mm thick sand filling below paver block complete all as specified and as directed.

Materials and labour Rendering 15 mm thick on fair faces of brick or concrete surfaces in CM 1:4 and surface finished even and smooth without using extra complete all as specified and directed by Engr-in-Charge.

Materials and labour Rendering 15 mm thick on other than fair faces of brick or concrete surfaces in CM 1:4 and surface finished even and smooth without using extra complete all as specified and directed by Engr-in-Charge.

Materials and Labour Cement based paint of any colour / tint , two coats, over a coat of alkali resistant primer on newly plastered external wall surfaces including necessary preparation of surfaces complete all as specified and as directed.

Material and Labour Synthetic enamel paint of any colour / tint, two coats over a coat of red oxide primer on new steel or iron surfaces over 10 Cm width or girth including necessary preparation of surfaces complete all as specified and directed.

Materials and Labour RCC NP2 hume pipe, 450mm bore, laid and jointed complete with collars including taking down old unserviceable RCC hume pipe complete all as directed by engineer-in-Charge.

RANJIT KUMAR HALDER

ESS PEE UDYOG

UJJAL ELECTRIC

SATYAM CONSTRUCTION

SOMANI BUILDERS

S. K. CONSTRUCTION SYNDICATE AND ENGINEERING CO.