Constt. of Sanitary complex at MS Khurrwah

Amount

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed:

Random Rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level and curing complete with:(including leading and lifting carriage of material)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size)(Including all leads and lifts carriages of material by MT/HL)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)(Including all leads and lifts carriages of material by MT/HL)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:1½:3 (1 cement :1½ coarse sand: 3 graded stone aggregate 20 mm nominal size) (Including all leads and lifts carriages of material by MT/HL)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level , Thermo-Mechanically Treated bars of grade Fe-500D or more.(Including all leads and lifts carriages of material by MT/HL)

Providing & fixing upto floor five level precast cement concrete string or lacing courses, copings, bed plates, anchor blocks, plain window sills, shelves, louvers, steps, stair cases etc. including hoisting and setting in position with cement mortar 1:3 (1 cement:3 coarse sand) cost of required centring, shuttering and curing complete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) (Including all leads and lifts carriages of material by MT/HL)

Providing form work

Foundation

SUSPENDED SURFACE

Edging

15mm Cement plaster of mix: 1 : 6 ( 1 cement : 6 fine sand)(including leading and lifting carriage of material)

Colour washing such as green blue or buff to give an even shade New work (two or more coats) with a basecoat of white washing with lime.

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50 mm thick with 20mm nominal size stone aggregate.(Including all leads and lifts carriages of material by MT/HL)

Providing and fixing PTMT shelf 440 mm long, 124 mm width and 36 mm height of approved quality and colour, weighing not less than 300 gms

Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :

100 mm inlet and 100 mm outlet

100 mm inlet and 75 mm outlet

Constructing brick masonry chamber for underground C.I. inspection chamber and bend with common burnt clay (non modular) bricks of class designation 7.5 in cement mortar 1:4 ( 1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg ) R.C.C. top slab with 1:1 ½ : 3 mix ( 1 cement : 1 ½ coarse sand : 3 graded stone aggregate 20 mm nominal size),foundation concrete 1:5:10 (1 cement: 5 fine sand: 10 graded stone aggregate 40mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 ( 1 cement : 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design : Inside dimensions 455x610 mm and 45 cm deep for single pipe line?

Providing and laying PVC soilneaste pipe including bed concrete and all round PVC pipe as per stander design 150mm dia(Prince , finolex , superme make of 4kg/cm2 pressure.)

75mm dia.

100mm dia.

150mm dia.

Providing and fixing PVC loose collar(surpreme/ prince make)

75mm dia.

100mm dia.

150mm dia.

Providing and fixing PVC Plan bend (surpreme/ prince make)

75mm dia.

100mm dia.

150mm dia.

Providing and fixing PVC door bend (surpreme/ prince make)

75mm dia.

100mm dia.

150mm dia.

Providing and placing on terrace on all floor levels polythene water storage tank ISI;12701 marked indicating the bis no with cover and suitable locking arrangements and making the necessary holes for inlet, outlet and overflow pipes including fitting and the base port for tanks syntax , electroplast , star , lotus, or equivalent having ISI make .

Providing and fixing Motor pump of ½ HP of sharp ,bajaj,or equivalent make including fittings (complete job)

Providing and fixing soap dish of approved quality

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making the walls etc.: Internal work-Exposed on wall

15 mm dia. nominal bore .

20 mm dia. nominal bore .

Providing and fixing G.I union in G.I pipes including cutting and threading the pipes and making long screws etc. complete (new work) 15mm dia nominal bore

Providing and fixing wash basin with C.I /M.S brackets 15mm C.P bras pillar taps , 32mm C.P bras waste of standard pattern , including Painting of fittings and brackets , cutting and making the good walls wherever . white vitrerous China . size wash basin 630x450mm with pair of 15mm c.p brass pillar tap .(make cera/equivalent)

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipe and fitting.(make cera/equivalent)

Providing and fixing 600x450mm beveled edge mirror of superior glass of approved quality complete with 6mm thick hard board .ground fixed to wooden cleats with C.P bras screws and washer complete

Providing and fixing PTMT grating of approved quality and colour . circular type 125mm nominal dia with 25mm waste hole(make jaquar/cera/equivalent)

Providing and fixing cp bib cock of approved quality 15mm nominal bore complete job (make jaquar/ cera /equivalent) Short nose

Providing and fixing C.P brass angle valve For basin mixer and gyser points of approved make confirming to . 15mm nominal bore complete job .(make jaquar/cera/equivalent)

Providing and fixing 110mm dia. PVC waste water / sewerage pipe of 4 kg pressure per sqm of supreme / prince/ finoeix make prakash surya

Providing and fixing unplasticised PVC connection pipe with brass union 30cm length 15mm nominal bore

Providing and fixing of 600x120x5 mm glass shelf with edges round off supported on aluminium angle frame with cp brass brackets and guard rail complete fixed with 40 mm long screws etc make jaquar/cera

Providing and fixing ball valve ( brass) of approved quality complete high or low pressure with plastic floats

Providing and fixing PTMP towel ring trapezoidal shape 215mm long 200 mm wide with a minimum distance of 37mm from wall face with concealed fittings arrangements of approved quality and colour , weighing not less than 80 gram

Providing and fixing white vitrous china pedestal type water closet ( European type wc pan) with seat and lid ,10 litre low level pipe with PVC flushing cistern including flush type with manually controlled device conforming to IS:7231 with all fittings and fixures, complete including cutting and making good the walls and floors where ever required.(make cera/equivalent)

Making soak pit 2.5 m diameter 3.0 meter deep with 45x45 cm dry brick honey comb shaft with common burnt clay (non modular) bricks of class designation 7.5 bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design

Providing and making CIB of approved size by way of making another layer of 12 mm thick plaster with 1:4 cement mortar on front side outer plastered surface, painting and writings as per the direction of engineer in-charge including supply of materials, carriages all complete. L.M.R.

M/S HANS RAJ GOVT CONTRACTOR