REPAIRS TO FENCING , FLOORING, PATH, HARDSTANDING , SWT AND CERTAIN MISC WORKS AT AF STN UDHAMPUR

Amount

Demolition of cement concrete as in ground floor & paving n exc 15cm thick below or above GL complete all as specified and as directed by Engineer-in-Charge..

M&L for PCC 1:4:8 type D-2 75 mm thick (using 40mm graded aggregate) as in sub base layer, complete all as specified and as directed by Engineer-in-Charge.

M&L for cement concrete type B-0 1:2:4 using 12.5mm graded aggragate as in lintle up to 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs stones, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and as directed by Engineer-in-Charge.

Dismantling of machine pressed concrete interlocking paver block tiles of any description or thickness in floors, aprons etc laid dry or laid dry and ponted complete all as specified and as directed by Engineer-in-Charge.

M&L for Coloured machine pressed / vibro mechanically floated glossy finish interlocking Paver Block any shape and size conforming to IS 15658-2006 of 60 mm thickness, M-40 grade, with topping of cement mixed with imported pigment complete all as specified and as directed by Engineer-in-Charge.. (Make: ULTRA / MODERN / RUCHI / ISI Marked). NOTE:- Colour and shape shall be approved by GE.

All as per item no 05 above but except tiles complete all as specified and as directed by Engineer-in-Charge.

M&L for Coloured machine pressed / vibro mechanically floated glossy finish interlocking Paver Block any shape and size conforming to IS 15658-2006 of 80 mm thickness, M-40 grade, with topping of cement mixed with imported pigment complete all as specified and as directed by Engineer-in-Charge. (Make: ULTRA / MODERN / RUCHI / ISI Marked). NOTE:- Colour and shape shall be approved by GE.

All as per item no 07 above but except tiles complete all as specified and as directed by Engineer-in-Charge.

M&L for sand cushioning 50mm thick under floor or in foundation including watering and consolidation, complete all as specified and as directed by Engineer-in-Charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and as directed by Engineer-in-Charge.

M&L for Cement concrete type B-1, 1:2:4 (20 mm graded aggregate) 25mm thickness as in floor for laying tiles, complete all as specified and as directed by Engineer-in-Charge.

M&L for Outdoor Endura Floor tiles of size 300x300mm thickness not less than 10mm set, jointed and pointed in neat cement slurry in floor,laid over and incl 15mm thick cement screed base in CM 1:4, complete all as specified and as directed by Engineer-in-Charge.

M&L for fixed in repair Chequered cement concrete tiles of size 25cm x 25cm x 20 mm thick (with grey cement and colour pigments) set, jointed and pointed in neat cement slurry in floor, laid over and incl 15mm thick cement screed base in CM 1:4, complete all as specified and as directed by Engineer-in-Charge.

M&L for PCC 1:2:4 type B-1 using 20mm graded aggregate as in lintels up to 1.50m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railing up to 60cm in height, copings kneelers, apex stones and mass concrete incl necessary form work, complete all as specified and as directed by Engineer-in-Charge.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground post embedded in natural ground, complete all as specified and as directed by Engineer-in-Charge.

Dismantling fencing wire mesh, any type complete all as specified and as directed by Engineer-in-Charge.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and as directed by Engineer-in-Charge.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground post embedded in cement concrete complete all as specified and as directed by Engineer-in-Charge.

Excavation in post holes( or similar holes) each n exc 0.5 cum , getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm in any type of soil,complete all as specified and as directed by Engineer-in-Charge.

M&L for PCC 1:3:6 Type C-2 (using 40mm graded Agg) as in foundations, filling and mass concrete, complete all as specified and as directed by Engineer-in-Charge.

S&F rolled mild steel in joist, channel, angle or tee sections, fixed independently, without connecting plates, etc (Cut to ordinary lengths ) and fixing complete with Fe 410 W (Gde E-250) quality A grade complete all as specified and as directed by Engineer-in-Charge.

Fixing only rolled mild steel in joist, channel, angle or tee sections, fixed independently, without connecting plates, etc (Cut to ordinary lengths) and fixing, complete all as specified and as directed by Engineer-in-Charge.

S&F MS bands, straps, supports or stays for rainwater, ventilating pipes, including bolts if reqd, hooks (stay), hook and pintle hinges, large hasp and staples, clamps, hold fasts, wall ties, plain angle cleats for securing purlins to wood trusses or rafters and similar small articles confirming to Fe-290 Gde E-165, complete all as specified and as directed by Engineer-in-Charge.

Fixing only MS bands, straps, supports or stays for rainwater, ventilating pipes, including bolts if reqd, hooks(stay), hook and pintle hinges, large hasp and staples, clamps, hold fasts, wall ties, plain angle cleats for securing purlins to wood trusses or rafters and similar small articles confirming to Fe-290 Gde E-165, complete all as specified and as directed by Engineer-in-Charge.

M&L for Mild steel round bars 10mm dia and over , cut to length, bent to shape reqd, including cranking, bending for tieing of chain link fencing of Gd.I, IS-432 (Part-I), complete all as specified and as directed by Engineer-in-Charge.

Fixing only mild steel round bars 10mm dia and over , cut to length, bent to shape reqd, including cranking, bending for tieing of chain link fencing, complete all as specified and as directed by Engineer-in-Charge.

Supply only Chain link MS galvanisd fencing, any size or type complete all as specified and as directed by Engineer-in-Charge.

S&F MS screw bolt machine made with hexagonal or square head at one end screw the other end, each screw end to be fitted with washer and hexagonal or square nut length of bolt exc 12mm long dia of diameter of neck not exc 20mm, complete all as specified and as directed by Engineer-in-Charge.

M&L for Preparation of new steel iron surfaces of any descripotion over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primercomplete all as specified and as directed by Engineer-in-Charge.

Restraining, resecuring including making good staples etc fixing only galvanised. 2 strand, steel Barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails , including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and as directed by Engineer-in-Charge.

S&F in repair galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and as directed by Engineer-in-Charge.

Demolition of brick work, stone/boulder masonry built in cement mortarcomplete all as specified and as directed by Engineer-in-Charge.

M&L for brick work with sub class B bricks straight or curved on plan exc 6m radius in CM 1:6 complete all as specified and as directed by Engineer-in-Charge.

ditto item no 33 above but except bricks, complete all as specified and as directed by Engineer-in-Charge.

Taking down cement plaster on brick or stone walls etc. including raking out joints hacking for keys scrubbing down with water etc complete all as specified and as directed by Engineer-in-Charge.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished with even and smooth w/o using extra cement, complete all as specified and as directed by Engineer-in-Charge.

M&L for Preparing of newly plastered surfaces of walls and applying two coat of cement base paint in camouflage pattern over a coat of cement base primer, complete all as specified and as directed by Engineer-in-Charge.

M&L for applying two coats of Acrylic Exterior Emulsion paint camouflage pattern on newly plastered surfaces of walls and preparation of walls, complete all as specified and as directed by Engineer-in-Charge.

Repair to exisiting rolling shutter by greasing of size exc. 4.00 Sqm but n exc. 7.5 Sqm each including opening top cover, removing spring etc and supply and fixing new spring, greasing the anchoring rod, refixing the top cover etc complete making the rolling shutter duly functional, complete all as specified and as directed by Engineer-in-Charge.

Repair to exisiting rolling shutter by greasing of size exc. 8 Sqm but n exc. 15 Sqm each including opening top cover, removing spring etc and supply and fixing new spring, greasing the anchoring rod, refixing the top cover etc complete making the rolling shutter duly functional,complete all as specified and as directed by Engineer-in-Charge.

Repair to existing mild steel gate of size n exc. 2.00m wide and n exc. 3.00m height including oiling, greasing, change of pintle hinges, brackets, bearing system, welding complete and make gate smooth functioning in all respect including taking down and refixing if required complete all as specified and as directed by Engineer-in-Charge.

Repair to existing mild steel gate of size n exc. 5.00m wide and n exc. 4.00m height including oiling, greasing, change of pintle hinges, brackets, bearing system, welding complete and make gate smooth functioning in all respect including taking down and refixing if required complete all as specified and as directed by Engineer-in-Charge.

Repair to existing mild steel gate of size n exc. 8.00m wide and n exc. 4.00m height including oiling, greasing, change of pintle hinges, brackets, bearing system, welding complete and make gate smooth functioning in all respect including taking down and refixing if requiredcomplete all as specified and as directed by Engineer-in-Charge.

Dewatering the static water tank completely and cleaning of static water tank from bottom, wall by steel wire brush including removal of all vegetation, mud & leaves etc of capacity 15000 gallons, complete all as specified and as directed by Engineer-in-Charge.

Dewatering the static water tank completely and cleaning of static water tank from bottom, wall by steel wire brush including removal of all vegetation, mud & leaves etc of capacity 25000 gallons, complete all as specified and as directed by Engineer-in-Charge.

S&F in repair Welded steel wire fabric (weight n exc 4.00 Kg per sqm metre) fixed to wood or steel members, complete all as specified and as directed by Engineer-in-Charge.

M&L for preparation of old surfaces of existing wall surfaces and applying two coats of white wash on wall surfaces of static water tank, complete all as specified and as directed by Engineer-in-Charge.

Dismantling Wrought Iron or Mild Steel works of any description not otherwise provided for, complete all as specified and as directed by Engineer-in-Charge.

S&F MS Hand rails, half round or other steel section, for doors, balusters, nosing to steps including embedding in concrete and screwing etc. wind ties for roof including securing bolts, complete all as specified and as directed.

S&F steel work in tubular trusses incl special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St-240, complete all as specified and as directed.

S&F rolled mild steel in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting platesand similar works and fixing complete Fe-410W (Gde E 250 quality A) complete all as specified and as directed.

Dismantling plain or corrugated steel sheets, asbestos cement (corrugated, semi corrugated) etc sheets and any type or any description of roof covering, complete all as specified.

S&F Pre-painted galvalume aluminium zinc coatingn GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall fixed with self tapping screws as complete all as specified and as directed.

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel 0.50mm thick of any colour having tensile strength of 550mm as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and as directed by Engineer-in-Charge.

SHIVAE CONSTRUCTION

RAMAN CONSTRUCTION CO

ASIA BUILDER

ANIKET TRADERS

TARUN BUILDERS