SRMO Industrial Area Road at Electronic Complex and Industrial Estate Chambaghat Distt. Solan (HP). SH P/L Paver Blocks from RD-0.00 to RD 100, re-carpeting of existing roads.

Amount

Stone soling prperly handpacked filling interstices with kharnja stone & consolidated properly complete in all repsect.

Providing and laying cement concrete 1:4:8 (1cement:4sand:8graded stone agregate 40mm nominal size ) and curring complete excluding cost of form work in foundation and plinth.

Providing form work with steel plates 3.15mm thick weled with angle iron in frame 30x30x5mm so as to give a fair finish including levelling centering, shuttering strutting and propping etc. With wooden battens and ballies, hight of propping and cenring below supporting floor to ceiling in all heights and removal of the same for in-stu reinforced concrete and plain concrete work in:- a) Beams, cantilevers, girders & lintels, sides & soffits or beams, beam haunchings, cantilvers bressumers and lintels not exceeding 1mtrs in depth.

Providing & laying reinfirced cement concrete work 1:1.5:3 (1cement: 1.5sand: 3 well graded stone aggregate 20mm nominal size) proportionally by weight with 43 grade cement @ 400 kg/cum minimum M-20 grade and curing complete excluding cost of form work and reinforcement for reinforced concrete work in all height as per HPPWD specifications with updated BIS norms. a) Suspending floors roofs landing & shelves and their supports, balconies, beams, girders, bressumers and cantilevers

Providing tor steel reinforcement (Fe 415/ Fe-500 D as per design) for RCC work including bending, binding and placing in postion complete upto all floor levels.

Providing and laying heavy duty precast cement concrete inter locking paver blocks vibro compacted upto M- 30 grade i/c border or kurb block gray or coloured over sub-base of concrete with 25mm thick average thickness of cement mortar 1:4 (1cement:4sand) laid over and jointed with neat cement slurry mixed with pigment to match the shade of blocks i/c curring rubbing & polishing complete (sub base concrete floor to be paid for separately) bedding sand thickness 25mm as per MoRD specifications (clause- 1504) average 28 days strength of 8 blocks as 30 MPa & strenght of indivisual block not less than 26 Mpa (Clause 1504). 80mm thick

Water Bound Macadam Grading 2:- Providing laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 2 as per technical specification clause 405 including carriage of material within all leads and lifts (63 to 45mm).

Water Bound Macadam Grading 3:- Providing laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 3 as per technical specification clause 405 including carriage of material within all leads and lifts( 53 to 22.4mm).

Providing and applying primer coat with bitumen emulsion (SS-1) on the prepared surface of granular base i/c cleaning of road surface and spraying primer at the rate of 0.70-1.00 kg/sqm using mechanical means as per technical specification clause 502 SS-1 @ 0.70-1.00Kg/sqm.

Providing and applying Tack coat with bitumen emulsion (RS-1) using emulsion distributor at the rate 0.30-0.35 kg/sqm on the prepared non bituminous surface cleaned with Hydraulic broom as per technical specification clause 503

Bituminous Macadam:- Providing and laying bituminous macadam with hot mix plant using crushed aggregates of grading premixed with bituminous binder, transported to site upto all leads laid over a previously prepared surface with paver finisher to the require grade and alignment and rolled to achieve the desired compaction as per technical specification. (Bituminous s-90) @ 72.43 kg/cum.

Bituninous Concrete:- Providing laying and rolling 30mm thick bituminous concrete with 100-120 T PH batch type hot mix plant providing an average output of 75 tonnes per hour crushed aggregates of grading premixed with bituminous binder, @ 5.40 to 5.60% of mix and fillar, transporting the hot mix to working site laying with a hydrostatic paver finisher with sensor control to the rquired grade & alignment, rolling with smooth wheeled vibratory and tender roller to achive the desired compaction as per MORTH specifcations clause No.508 complete in all respect. using VG-10/S-90 bituminous binder type-B (by mechanical means).