Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹1.6 CrAWARDED | ₹1.6 Cr | AWARDED |
Tender Value
₹1.6 Cr
EMD Value
₹2.5 L
Closing Date
3 Jan 2026, 9:30 pmClosed
Karnataka Slum Development Board
Repairing of Electrical works and Providing LT Feeder Pillar box,Meter Panel Board and Street Lights to the Housing Layout Constructed Under JNNURM-BSUP Scheme at Sy.no. 53 of Sadaramangala in Bangalore City.
KSDB/2025-26/EL/WORK_INDENT370
KSDB/2025-26/EL/WORK_INDENT370
Open
Electrical
Two Tender Document System(Two Cover)
KSDB Bengaluru Division No ONE
₹4,110
₹2.5 L
26 Dec 2025
26 Dec 2025
6 Jan 2026
3 Jan 2026
31 Dec 2025
Repairing of Electrical works and Providing LT Feeder Pillar box,Meter Panel Board and Street Lights to the Housing Layout Constructed Under JNNURM-BSUP Scheme at Sy.no. 53 of Sadaramangala in Bangalore City.
Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers. 16A. A) 16 Amps for Each House. For Panel Box. Complete as per Specificatio...
do above 32 Amps for Panel Box
Earthing: Providing and fixing and wiring earth electrode for grounding circuits IC cutouts and other equipments on the meter board in the pit. The pits should be filled up with equal proportion of sa...
Fabricating supplying and mounting MS box made out 16 SWG suitable for floor/wall mounting ,fully weather proof with provision for better heat dissipation, provided with hinged front cover,equipped wi...
Supplying.........A rated 3 phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mountedonphenolic/ FRP/ DMC insulator whi...
Supplying and fixing regular MCB distribution boards on wall/ Woodboard/ flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/ 3p...
Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of O...
Supplying, fixing and wiring 0 to 600V 96x96mm AC Voltmeter on existing panel/wood board.. Complete as per Specifications and directions of Engineer in Charge
Supplying, fixing and wiring rotary selector switch suitable for Ammeter . Complete as per Specifications and directions of Engineer in Charge
Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of O...
Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...
Supplying and fixing hylum plastic sheet 3mm thick with necessary nitches for fixing switches, regulators etc.,and fixing on existing wood or metal box using N. F. screws. Complete as per Specificatio...
Wiring for lighting/ power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified I...
Supplying and fixing angle iron frame work fabricated out of M.S.angle iron..and M.S.Flat......with bolts,washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint.
do above 75 x 75 x 6 mm
Supplying of on load change over switches 4poles, AC-23A Duty, 415V,50Hz, AC Supply. With all accessories.(SM Enclosure Sheet Metal Execution). 100A. Complete as per Specifications and directions of E...
1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975. 50 Sqmm...
Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff. LT Cable. 35 to 95 Sqmm. Complete as per Specifications and dir...
Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights...
Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after
watering with a lead upto 50 m, and lift upto 1.5...
Providing M-Sand : Supplying and filling in plinth, foundations / UG cable work with approved M-sand including watering, ramming, consolidating and dressing. The rate includes the cost of material, la...
Cable Covering Tile 125x250x40 mm. Complete as per Specifications and directions of Engineer in Charge
Spreading and forming with sand all round the cable to a depth of 75 mm and width of 500 mm. (Does not include cost of sand). Complete as per Specifications and directions of Engineer in Charge
Supply and Installation / Fixing / Provision of Outdoor type Thermoplastic Modular Panel enclosure with transparent Polycarbonate Lid, shock proof, IP65 (Weather Proof), rust proof, dust proof, water ...
Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polyc...
Supplying and Fixing of........mm dia class A GI pipe bracket upto 2mtr long bent at suitable angle and fixing to this bracket street light fitting of all capacities to GI or GI or rail or RCC pole / ...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
Fixing halogen/metal halide /SVL/IL/LED floodlight fitting over existing pole / wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires. Complete as per Specifications and ...
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .