SPECIAL REPAIR TO BLDG NO P 19 1 to 12 OF TIPPU VIHAR AT KALUCHAK UNDER GE KALUCHAK

Amount

B&R PORTION:- Taking down chowkats or frame with shutters (without taking off shutters from the frames) area not exceeding 1.5 Sqm each, complete all as specified & directed.

Taking down chowkhats or frames (without taking off shutters from the frame) area exceeding 1.5 Sqm but not exceeding 4 sqm each complete all as specified & directed.

Taking down shutter of any description area exceeding 1 Sqm and not exceeding 2 sqm each complete all as specified & directed .

Pressed steel frames (factory made) made out of 1.25 mm thick black MS sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete size of frame 105x60mm including bottom of each chowkat to be welded with 2 Nos 25x25x3mm thick flat iron projecting 10 cm on either side, including one shop coat of red oxide zinc crome primer etc. Complete all as specified and directed.

Pressed steel frames (factory made) made out of 1.25 mm thick black MS sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete size of frame 125x60mm including bottom of each chowkat to be welded with 2 Nos 25x25x3mm thick flat iron projecting 10 cm on either side, including one shop coat of red oxide zinc crome primer etc. Complete all as specified and directed.

Plain Cement Concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregate as in back filling of pressed door frames, complete all as specified.

Plain framed panelled shutters factory made 35mm thick of 2nd class hard wood rail and style (two panel) with lock rail and panel of 9mm B.W.P commercial ply or 12 mm thick veneered particle board with commerciel venering on both faces. the size of rail and style as per IS:1003 (part I) kiln seasoned and chemically pressure treated, complete all as specified.

2nd class hard wood, 35 mm thick, glazed and skeleton shutter, divided into square, with plain, chamfered or rounded mitered and rebated sash bars, any number of panels, prepared to receive glass, gauge etc. edges of frames chamfered or rounded, fitted with cut and mitered beads for securing glass etc. size of members as specified in SSR Part I clause 8.24 (a) kiln seasoned and chemically pressure treated complete all as specified & directed.

Box type steel windows comprised of tubular frame and shutters made out of 1.25 mm thick MS sheet tube factory made with double side shutters wire gauged shutter & glass glazed shutter (wire cloth and glass panes will be measured and paid seperately) with side hung shutters with MS handles and MS peg stay dovetailed or welded incl 02 Nos, MS Tower bolts 150 mm long for each leaf and 10 mm square bar grill / guard bars at spacing as shown on Drg welded to MS flat iron frame work ,including other fittings ,hinges ,MS handles ,tarred hold fasts ,PCC blocks for hold fasts etc all as shown on Drg No CEPZ/TD -354/09 sheet 1/3 to 3/3 including one coat of red oxide zinc primer, complete all as specified and directed by Engr-in-charge.

Steel ventilator with top hung shutter including hinges, steel peg stay, lugs as in hold fast with locking arrangements, complete all as specified.

Solid PVC door frame of size 50mm x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, suppling & fixing in opening as per specification & drawing all as specfied and directed.

Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with moulded plain colour PVC C channel having a PVC strip of 20 mm width stuck in side with solvent cement for style and plain colour PVC sheet for top rail, lock rail and bottom rail on either side as in gap insert for top rail, bottom rail panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement suppling and fixing in the frame at site as per specification and drawing complet all as specified and directed.

Solid PVC door frame of size 50mm x47mm made out of 5mm wood grain printed PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with printed sheet all as specfied and directed.

All as per Srl item No 12 as above but wood grain printed PVC sheet used instead of Plain colour PVC sheet & 5mm thick x15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm (90degree ) used instead of exposed portion of PVC sheet beading as per specification and drawing, complete all as specified and directed.

Butt hinges, medium weight, cold rolled mild steel, 100 mm size, complete all as specified & directed.

Butt hinges, medium weight, cold rolled mild steel, 75 mm size, complete all as specified & directed.

Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed 300mm long, complete all as specified.

150 mm long aluminium anodised barrel tower bolt of extruted section ISI marked complete all as specified and directed.

100 mm long aluminium anodised barrel tower bolt of extruted section ISI marked complete all as specified and directed.

150 mm long extruded Aluminium handles, fabricated type, anodised complete all as specified.

100 mm long extruded Aluminium handles, fabricated type, anodised complete all as specified.

75 mm hasp and staple safety type, with mild steel pin, aluminuium anodised including bolt to hinge plate and fixed with screws, complete all as specified and directed.

Mild steel Helical door spring 150mm size including roller and roller plate complete all as specified fixed with screws or welding as required, complete all as specified.

Galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised wire staple, complete all as specified.

Hacking out old broken glass, (any thickness, size, quality or description) from wooden/ steel frames or stone, concrete or brick surrounds,glazed with putty or fixed with beads complete all as specified & directed.

3mm thick sheet glass, ordinary quality, glazed with oil putty or wooden beads, in square n exc. 0.5 Sqm each pane, complete all as specified.

3mm thick figured glass, pin head type and glazing with oil putty or wooden beads in square n.exc 0.5 sqm each complete all as specified & directed.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc; and cutting chases for concealed water tubing ,etc., and making good, cutting not exc 20 cm girth in brick walls, complete all as specified.

Taking up or down steel tubing of 15mm bore pipe and connection laid in trenches or floors or fixed to walls and including cleaning for refixing or removal to store with all fittings, complete all as specified and directed.

Fixing only old steel galvanised tubing of 15 mm bore, with and including all fittings in new or old position as in walls, ceiling, floors etc complete all as specified.

Galvanized steel water tubing, 15 mm bore, medium grade, with all fittings , fixed complete to walls, ceilings or laid in floors complete all as specified & directed.

Taking up or down steel tubing of 20mm bore pipe and connection laid in trenches or floors or fixed to walls and including cleaning for refixing or removal to store with all fittings, complete all as specified and directed.

Fixing only old steel galvanized tubing of 20mm bore, with and including all fittings in new or old position as in walls, ceiling, floors etc,complete all as specified & directed.

Steel water tubing of 20 mm bore ‘medium grade’ galvanized with all fittings like socket, union, elbow, bend, tees etc fixed to walls and ceilings or laid in floors, complete all as specified.

Dismantling water tanks of any description exc 500 and not exc1000 litre capacity and removing from site complete all as specified & directed.

Rotational moulded polyethylene water storage tanks, tripple layered (cylindrical vertical with closed top ) hoisted and fixed in position, including over flow and drain out pipe complete of 1000 litre capacity , all as specified in SSR Part-I complete all as specified & directed.

Ball brass valve, high pressure, with polythene float and fly nut complete screwed for iron pipe or brass ferrule and fixed complete of 20 mm bore dia complete all as specified & directed.

15 mm dia bib tap, cast copper alloy, Chromium plated screwed for iron pipes with crutch or butterfly handle fixed in repairs, complete all as specified.

Stop valve cast copper alloy, screwed down high pressure with capstan head, screwed both ends for 20 mm bore iron pipe or for unions and fixed in repairs, complete all as specified and directed.

Stop valve cast copper alloy, screwed down high pressure with capstan head, screwed both ends for 15 mm bore iron pipe or for unions and fixed in repairs, complete all as specified and directed.

Brass chromium plated shower rose 125mm size, with swivel joints fixing repairs to steel pipe or union of 15 mm bore, complete all as specified and directed.

Vitreous china squatting pan 'Orissa pattern, size 580x440 mm white, with integral foot rest and P or S trap and connection to flushing pipe, anti-syphonage pipe complete including provision of cement concrete bedding and making good to floor as existing, fixed in repairs, complete all specified in SSR part I complete all as specified and directed.

Cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in mass filling in sunken slab of toilets, complete all as specified.

Rendering 10mm thick plaster in cement sand mortar 1:4 on brick wall and concrete surface mixed with & liquid integral water proofing compound as per manufacturer's instructions all as directed by Engr-in-charge. (WPC shall be measured and paid seperately)

Supply only liquid water proofing compound complete all as specified & directed.

Vitreous china wash hand basin, white, flat back, size450 x 300 mm excluding taps, waste, chain & plug and porcelain stopper but including brass chromium plated waste coupling, and waste pipe PVC 32mm dia including cutting for and pinning in ends of brackets or erecting stand etc, complete all as specified.

15mm dia CP pillar tap, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot or Cold' with long screwed shanks and fly-nuts, screwed for iron pipe, complete all as specified and directed.

PVC valve less symphonic action type flushing cistern 10ltr capacity , low level white with inlet ball valve float and handle including brackets, 32mm dia PVC flush pipe, complete all as specified and directed.

Brass CP towel rail 20mm dia 'D' type 60 cm long between flanges complete all as specified and directed.

Soap dish, brass chromium plated type fixed to plugs with chromium plated brass screws, complete all as specified and directed.

PVC connection 15mm size with PTMT nuts on both ends of length 450mm fixed, complete all as specified.

Stainless steel sink with drainage board 1 mm thick with plug, washer & waste, incl bedding cement mortar, overall size 915 X 460 mm, bowl size 410 X 330 X 160 mm fixed in repair complete all as specified & directed.

Kitchen plate rack of stainless steel of size "30x31x10" inches complete all as specified and directed. Make:-Prayag cat part No-P-346 or Equivalent cat part of make as specified in Appx 'F' here in after.

Dismantling CI pipes incl fittings of different bore of pipes ( 75mm to 100mm), complete all as specified.

Cast iron soil waste and vent pipe 100mm bore in any length with or without ears with cement joints laid in trenches or in floor fixed in repair to wall and floor complete all as specified & directed.

Cast iron soil waste and vent pipe 75mm bore in any length with or without ears with cement joints laid in trenches or in floor fixes to wall and floor complete all as specified & directed.

CI bends 75mm dia ,diminishing pieces or tapers with oval access door plates fixed in repair complete all as specified & directed.

CI bends 100mm dia ,diminishing pieces or tapers with oval access door plates fixed in repair complete all as specified & directed.

75 mm Cast iron floor trap with stainless steel grating including jointing to waste pipe fixed in plain cement concrete 1:2:4, type B1using 20mm graded stone aggregate, fixed in repair, complete all as specified and directed.

Cast iron vent cowl 75 mm, fixed in repair, complete all as specified and directed.

Demolition of brick work or stone/ boulder masonary built in cement mortar including all quoins arches pillars etc complete all as specified & directed.

Brick work in cement mortar 1: 4, using sub class ‘B’ bricks, straight or curved on plan exc. 6m mean radius complete all as specified & directed.

Demolition of cement concrete (unreinforced) in ground floors and paving n exc. 15 cm. thickness, below or above ground level complete all as specified & directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc including brushing with neat cement slurry with 3.0 Kg of cement per Sqm complete all as specified & directed.

Non skid ceramic coloured tiles 7 to 8mm thick area of each tile exceeding 0.18 sqm but not exc 0.38 sqm, (square size) in floors etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including 15mm thick screed bed in CM 1:4, complete all as specified and directed.

Machine cut Kota stone slab flooring not less than 19mm thick (size of stone shall not less than 55cmx55cm), 75mm wide white marble border alround, laid over & including 15 mm thick screed base in CM 1:6, jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, grinding and polishing to yield mirror finish with machine, complete all as specified.

Machine cut Kota stone slab not less than 19mm thick as in riser of steps, skirting, dado and pillar laid over & including 15 mm thick screed base in CM 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, grinding and polishing to yield mirror finish with machine, complete all as specified.

75 mm thick cement concrete (1:2:4), type C-2 using 40mm graded crushed stone aggregate as in plinth protection and laid in alternate bays complete and finished the even & smooth without using extra cement and providings joints through out the thickness of plinth protection filled with mastic filling comprising one part of 01 bitumen 85/25 grade and three part of sand by weight all as specified and directed

Dismantling floor, hearth, or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

Non skid ceramic coloured tiles 7 to 8mm thick ( Square or rectangular) area of each tile exeeding 0.06 Sqm but not exceeding 0.11 sqm as in floors laid over & including 15 mm thick screed bed in CM 1:6, set and jointed in neat cement slurry and pointed with white or coloured cement to match the shade of floor, complete all as specified.

Glazed ceramic plain / printed tile 300x450x6 mm thick on vertical surface as in Dado. Skirting etc (coloured tile) fixed over & including 10 mm thick plaster in CM 1:4 set and jointed with neat cement slurry and pointed with white or coloured cement to match the tiles, complete all as specified.

Factory made coloured precast designer tile of size 300mm x 300mm x 20mm in different colour and pattern (compressive strength not less than 250 Kg/Sqm) as approved by GE, set in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over & including 15mm thick screed bed or bedding layer of cement mortar 1:6, complete all as specified and as directed.

Galvanised mild steel wire cloth 0.63 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanised wire staple, fixed in repair, complete all as specified and directed.

20 mm thick granite black marble (of any type) work (table rubbed & polished) in steps, jambs, pillars, window-cills cooking platforms & like including pointing into white cement (1:2) using marble dust with admixture of pigment to match shade of granite laid over and including Screed bed or bedding layer of mortar 15mm thick for laying floor in CM 1:4 finished even & rough to receive top layer, complete all as specified and directed.

Taking down cement plaster on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc complete all as specified & directed.

Rendering 10 mm thick plaster in cement mortar 1: 3 on concrete surfaces as in ceilings finished even and smooth without using extra cement, complete all as specified.

Rendering 15 mm thick plaster in cement mortar 1: 6 on fair faces of brick work or concrete surfaces, finished even and smooth with out using extra cement, complete all as specified & directed.

Rendering 15 mm thick plaster in CM 1:4 on fair faces of brick work or concrete surfaces & finished the surfaces even and smooth without using extra cement, complete all as specified and directed.

Preparation of newly plastered surfaces and applying two coats of white wash on ceilings, complete all as specified.

Applying two coats of cement base paint on walls including preparation of new plastered or un-plastered surfaces of wall, complete all as specified.

Complete removal of existing treatment applying two coats of cement base paint on walls including preparation of old plastered or un-plastered surfaces of wall complete all as specified & directed.

Preparation of newly plastered surface of wall and applying two coat of oil bound distemper, white or tinted shade with and including wall care putty 3mm thick over plastered surface of wall, complete all as specified.

Complete removal of existing treatment, rubbing down and stopping of distempered white wash or any type of treatment and applying two coats of oil bound distemper over a coat of primer on old plastered surface with and including wall care putty 3mm thick over plastered surface of wall, complete all as specified.

Preparing surface of new wood and wood based material of any description, not otherwise described over 10 cm width or girth, and treated with two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Preparing surface of new or previously untreated steel surfaces of any description, not otherwise described over 10 cm width or girth, and treated with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Preparation of old painted wooden surfaces of any description not otherwise described, over 10cm width or girth and applying two coat of synthetic enamel paint, complete all as specified.

Preparation of old painted or new primed steel surfaces of any description not otherwise described, over 10cm width or girth and applying two coat of synthetic enamel paint, complete all as specified.

PTMT outer frame grating 125mm dia including embedding in tiles with white cement (Minimum weight 40 gms ) complete all as specified & directed.

Curtain/drapery rod 20 mm dia Aluminium fancy type complete with clamps, ring, ball shaped knobs at both end, all golden colour as approved,complete all as specified & directed.

Taking down cement plaster and decayed concrete of any description, upto tripple storey of building, from roof projection, chajja etc and making good the decayed portion with cement mortar 1 :3 mixed with water proofing compound as per manufacturers instruction or PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) including necessary form work and finally finished the surface with 15mm thick cement plaster in CM 1:3 and applying two coats of exterior paint, complete all as specified and directed.

Complete removal of existing water proofing treatment of any description and preparation of old concrete surface by picking sweeping, cleaning the entire roof surface thoroughly to remove all loose particles, dust/dirt particles etc and removal of debris off the premises, complete all as specified.

Brushing with neat cement slurry @ 3 Kg per Sqm, complete all as specified.

PCC 1:2:4 type B-0 using 12.5 mm graded crushed stone aggregate as in roof padding including prepration of surface and mix with water proofing compound and finished even and fair without using extra cement, complete all as specified and directed. (Note : WPC will measured and paid separately as supply only).

Complete removal of the existing roof treatment any nos of layers taken out membrane, PCC Padding/roof, tiles etc including grabbing up of tree roots , roughing and prepration surfaces of old concrete floor by picking , scrubbing down with steel brushes, sweeping, cleaning and washing down with water to remove dust etc. and applying the following Roof treatment complete all as specified and directed. (a)Applying 1st course of 15 mm thick screed bed with cement mortar 1:4 over old concrete surface (b)Applying 2nd course of bitumenous primer @ 0.4 kg/Square Metre conforming to IS-3384 over screed bed . (c)Applying 3rd course of a coat of bonding material with blown type bitumen of grade 85/25 heating to working temperature of 180 centigrade and applied @ 1.2 kg/Square Metre. (d)Applying 4th course of APP (Atactic Polypropylene) modified polymeric 3mm thick, weight not less than 3.6 kg/Square Metre with 160 Grams/Square Metre non woven polyster made at center core reinforced laid with 75 mm side overlap and 100 mm overlap. The membrane shall be laid with LPG torch and overlap sealed and finished neat . (e)Applying 5th course of a coat of bonding material with blown type bitumen of grade 85/25 heating to a working temperature of 180 centigrade and applied @ 1.2 kg/Square Metre .

Sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60cm long complete all as specified & directed.

Cabinet mirror of PVC moulded size 16" x 16" with napkin rail in ivory colour complete all as specified and directed.

E&M PORTION:- Taking down carefully unsv aluminium / copper conductor point wiring (light, fan, light socket, power socket) complete fitting such as swithes, sockets, lamp holder, utility light fitting, fan regulator etc and removing materials from sites and making good distrubed surface of walls and roofs complete all as specified and as directed.

Taking down carefully unsv main switch / DBs alongwith MCBs / wooden board / connected fittings & fixtures any type and making good distrubed surface of walls and roofs to match the existing surface, complete all as specified and as directed.

Point wiring with 1.5 Sqmm single core multi stranded copper conductor FRLS insulated and unsheathed heavy duty cable in colour code including contineous earth wire with cable of size 1.5 sqmm copper conductor flexible FRLS insulated drawn in and including concealed PVC rigid conduit medium grade ISI marked terminated into CI/pressed steel terminal boxes including 3.00mm thick hylam brand IS-2036 marked, laminated sheet cover for mounting switches, sockets, fan regulators etc for one light/fan/bell point controlled by one, one way switch including cutting chases and making good to disturbed surfaces of wall / ceiling / floor including treating with existing finishes, complete all as specified and as directed.

Description all as per srl item No-100 here in before but for one 3 pin socket outlet 6 amp independent complete all as specified.

All as per item No.100 above but for 3 pin 5 Amps on same board with cable 1.5Sqmm size, all as specified and directed

Description all as per srl item No 100 here in before but for one 3 pin socket outlet 15 Amp independent with cable of size 2.5 Sqmm for main wiring and 2.5 sqmm as in continuous earth wire.

Description all as per srl item No 100 here in before but for one light point controlled by two way switchs, complete all as specified.

Switch piano flush type 6 Amp single pole two way, (ISI marked), complete all as specified.

Switch piano flush type 6 Amp single pole one way, (ISI marked), complete all as specified.

Bell push piano flush type 6 Amp, (ISI marked), complete all as specified.

Musical door bell, 230 volts AC supply all as specified and directed by Engineer-in-Charge.

Switch socket multipurpose combination 2 in 1, 3 pin, 5 and 15 Amp flush type universal,complete all as specifed.

Switch socket multipurpose combination 2 in 1, 2 pin & 3 pin, 6 Amp flush type universal,complete all as specifed.

Socket multipurpose combination 2 in 1, 2 pin & 3 pin, 6 Amp flush type universal,complete all as specifed.

Ceiling rose (ISI Marked) 3 terminals PVC/poly carbonate, insulated body, compete all as specified.

Lamp holder PVC/Polycarbonate type with back plate suitable for batten fittings with and including inverter LED lamp 6500 K, 900 Im in white colour of 9 Watt base cap B-22 with polycarbonate diffuser and aluminium heat sink, complete all as specified and directed.

Fan regulator two module 80 W, stepped type (electronic ) flush type for 1200/1400mm sweep AC ceiling fan, complete all as specified. .

Tube light fitting integrated type slim 20 Watt efficancy 125 lumens / watt, extruded aluminium housing, PC diffuser complete with housing with all accessories pre wired and making connection with three core copper flexible cable of size 23/0.0076 from ceiling rose to light fitting, complete all as specified and directed. Make:-Crompton Model Bright Linea Cat Part No CCS-100-20-65-HL2-DP-NWH or Equivalent cat part of make as specified in Appx 'F' here in after.

MCCB 415 volts 4 Pole, rating 125 Amps,having short circuit and over load protection, breaking capacity 16 KA fixed thermal type, complete all as specified. Make: Legrand Cat Part No 4200 15 or Equivalent cat part of make as specified in Appx 'F' here in after.

Vertical distribution board TPN IP 43-'IK 09 with bus bars neutral links blanking plates double door suitable for FP MCCB as incommer and out going SP/TP MCBs 4 ways complete all as specified and directed. Make:-Legrand Cat part No :-5077 45 or equivalent cat part of make as specified in Appx "B" here in after. Note:- MCCBs and MCBs shall be measured and paid separately

Sheet metal enclosure factory made (Double door) for DBs, single pole and neutral, 240 volts, 8 way with 200Amps rated bus bar fixed on walls, including connecting both incoming and outgoing cable termination with proper taping, lagging testing and commissioning, complete all as specified. Make:- Legrand cat part No-5076 21 or Equivalent cat part of make as specified in Appx 'F' here in after.

MCB single pole and neutral 40 amps 240 volts 10 KA 'C' series all as specified. Make:- Legrand Cat Part No 4086 18 or Equivalent cat part of make as specified in Appx 'F' here in after.

MCB single pole 6 to 32 amps 240 volts 10 KA 'C' series all as specified. Make:- Legrand cat part No-4085 87 to 4085 95 or Equivalent cat part of make as specified in Appx 'F' here in after.

Supply and laying or fixing or passing through pipe 1100 volts grade heavy duty electric cable with XLPE insulated screened PVC bedded aluminium stranded conductor served with inner sheathing of PVC tape armoured with galvanised steel wire or tape and over all PVC sheathed of size 35 Sqmm x 3.5 core, complete all as specified.

GI pipemedimum grade 40 mm bore for cable protection fixed on poles or laid in trenches, under floor, ducts, road crossing etc with fixing clamps, nuts bolts, washer of requrered size if required, complete all as specified.

Sub main wiring with single core cable 2x 6 sq mm FRLS insulated unsheathed stranded copper conductor cable 1100 Volts grade including 20mm concealed PVC rigid conduit medium grade alongwith 1x 4 Sq mm FRLS insulated unsheathed copper conductor cable as earth wire connected with main earth dolly including chesing, cutting & making good to match with the existing surface with & including taking down old unsv sub main wiring of any type, complete all as specified and directed. Note:-2 wire of 6sqmm,1 wire 4sqmm and one run of pvc conduit shall be measured as one unit.

Earthing complete with galvanised mild steel earth plate electrode of size 600x600x6mm thick burried directly in ground earth (in vertical) earth pit not less than 2.25 mtr deep below normal ground level with top edge of the earth plate not less than 1.5 mtr below ground level connected to galvanised iron or earth lead wire 4mm dia (8 SWG) by means of nut, bolt, check nuts and washer of galvanised iron including PCC pit in PCC 1:2:4 type B-1 pre-cast RCC cover slab using reinfocement with XPM weighing not less than 1.87 kg/Sqm with suitable handle made of 12mm round bar, including necessary excavation and earth work in any type of soil, 20mm dia medium grade galvanised steel tube for watering with one end fixed with cast iron funnel and wire mesh, 15mm dia bore light grade galvanised steel tubing upto 7.5 m length for drawing earth lead wire protection pipe, common salt, charcoal, etc complete all as shown in electrical plate No 3 of SSR Part-I and testing on completion. Note:- Rate for earth lead wire & protection pipe upto 7.5mtr length are inclussive in this item & no extra payment shall be admissible for the same.

Excavation in trenches in any type of soil not exceeding 1.5m wide and n.exc 1.5 mtr in depth for laying of under ground electric cable and getting out complete all as specified.

Returning filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25cm thick in any type of soil complete all as specified.

Removing excavated surplus materials to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point, complete all as specified.

Dry river sand cushioning to UG cable 8 cm thick before laying and 15cm thick after laying complete all as specified and directed. Note:- 1.Dry fine sand of best available quality shall be used. 2.Punned thickness shall be made and paid.

Supply and laying sub class `B` bricks laid dry flat transversely along the length of cable with width equal to the length of bricks over sand cushioning as protection cover of cable laid, complete all as specified and directed.

Taking down of electronic meter from existing position and depositing electronic meter in MES store yard of AGE E/M and refixing the same after completion of work, complete all as specified & directed.

Making space by necessary grouting in wall under stair case for fixing of TPN DB in recessed position including necessary frame work with wooden door suitable for TPN DB with proper locking arrangement, complete all as specified & directed.

LED security light luminnare 60 Watt made up of pressure die cast aluminium housing with toughned glass and high power LEDs with secondary optics lencrs with IP66 protection including 10KV SPD efficancy 110LM/W, complete with hosing with all accessories pre wired and making connection with three core copper flexible cable of 1.5 Sqmm size to light fitting to be mounted on and including GI bracket made of 40 mm bore medium grade pipe made to shape of length 1.2 metre fixed with two set MS clamp 40 X6 mm nut bolt & washer for fixing security light fittingcomplete all as specified and directed. Make:-Crompton Greaves Cat Part No LSTP-60-CDL-M or Equivalent cat part of make as specified in Appx 'F' here in after.

Taking down of ceiling fan ,dismantling blades and depositing Fan and blades in MES store yard of AGE E/M and refixing the same after completion of work, complete all as specified & directed.

M/s Sekinder Paul Sharma

Hare krishna engineering const.

M/S A TO Z ENGINEERS

MOHINDRA ENTERPRISES

Tawi Constructions

NARESH KUMAR AND COMPANY

M/S Vishwakarma Builders

Dee Ess Construction Co