Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹1,120Accepted-Finance | 1 | Accepted-Finance Quoted L1 rate for BOQ item sl no 3 | |
| 2 | 1₹75,590Accepted-Finance KISHOR NAGAR 4 146 ITI ROAD ALIGARH ALIGARH UTTAR PRADESH 202001 | ALIGARH | UTTAR PRADESH | 202001 | 1 | Accepted-Finance Quoted L1 rate for BOQ item sl no 1,2, 4 to 11 | |
| 3 | Rejected-Technical | - | Rejected-Technical Not Submitted documents as per PQC |
Tender Value
₹68,682
EMD Value
₹1,400
Closing Date
10 Dec 2020, 2:00 pmClosed
SE,MMC,HTPS
SE,MMC,HTPS,KASIMPUR, ALIGARH-202127
Procurement of rubber gasket and rubber spider for Overhauling of unit no 9 of DTPS
2020_RVUNL_531579_1
SET-109/MMC/EPD/CTPS/HTPS/2020
Open Tender
Miscellaneous
Fixed-rate
30 days
HTPS, KASIMPUR
AS PER TENDER DOCUMENT
2 documents required · 2 mandatory
₹118
SAO,CFA BO,HTPS,KASIMPUR
₹1,400
23 Mar 2021
21 Nov 2020
11 Dec 2020
21 Nov 2020
10 Dec 2020
21 Nov 2020
21 Nov 2020 - 10 Dec 2020
Rubber spider (love joy coupling), material PU,ID 28mm
Rubber spider (love joy coupling), material PU,ID-24mm
Rubber spider (love joy coupling) ,material PU,ID-19mm
Rubber Gasket for 200 NB pipe sleeve joint coupling : OD : 250mm, ID: 222 mm, Width: 30mm, Wedge shaped thickness 14mm to 04mm circular lining in the inner portion of the gasket ( as per sample ) Heat resistant up to 300 deg.C Material Silicon Rubber
Rubber Gasket for 250 NB pipe sleeve joint coupling : OD : 310mm, ID: 274 mm, Width: 33mm, Wedge shaped thickness 14mm to 04mm circular lining in the inner portion of the gasket ( as per sample ) Heat resistant up to 300 deg. C Material Silicon Rubber
Plain Rubber Gasket for 250 NB pipe coupling: OD: 320mm, ID: 250mm, Thk: 5mm Heat Resistance up to 300deg. C Material Silicon Rubber
Plain Rubber Gasket for 200 NB pipe coupling: OD: 270mm, ID: 200mm, Thk: 5mm Heat Resistance upto 300deg. C Material Silicon Rubber
Circular Rubber Gasket for Poke Hole of ESP Hopper: OD: 220mm, Id: 100mm, Thk: 05mm ( as per sample ) Heat resistant up to 300 deg. C Material Silicon Rubber
Rectangular Rubber Gasket for bottom plate of 200NB Branch Isolation Valve: LxB: 410x100mm, Thk: 05mm, No. of Holes in the gasket: 10 Nos., 08 Nos. holes of dia. 12mm and 02 Nos. holes of dia. 30mm.( as per sample ) Heat resistant upto 300 deg.C Material Silicon Rubber
Rectangular Rubber Gasket for bottom plate of 250NB Branch Isolation Valve: LxB: 430x100mm, Thk: 05mm, No. of Holes in the gasket: 10 Nos., 08 Nos. holes of dia. 12mm and 02 Nos. holes of dia. 30mm.( as per sample ) Heat resistant upto 300 deg.C Material Silicon Rubber
Neoprene Rubber Flat Rubber Ring OD:310mm,ID: 290MM,Thickness:10 mm Width :40 mm
HEX HD SCREW M6X16 MOC-HT,Grade not less than 8.8, make-LPS/TVS/UNBRAKO
HEX HD SCREW M 10X25 WITH NUT AND WASHER MOC-HT,Grade not less than 8.8, make-LPS/TVS/UNBRAKO
HEX HD SCREW M20X80 , WITH NUT AND WASHER MOC-HT,Grade not less than 8.8, make-LPS/TVS/UNBRAKO
HEX HD SCREW M20X70 MOC-HT,Grade not less than 8.8, make-LPS/TVS/UNBRAKO
HEX HD SCREW M 12X30 MOC-HT,Grade not less than 8.8, make-LPS/TVS/UNBRAKO
HEX NUT M20 MOC-HT,Grade not less than 8.8, make-LPS/TVS/UNBRAKO
SCREW CAP SOC M20X75 MOC-HT,Grade not less than 8.8, make-LPS/TVS/UNBRAKO
SCREW CAP SOC M20X60 MOC-HT,Grade not less than 8.8, make-LPS/TVS/UNBRAKO
HEX SCREW M 10X70 MOC-HT,Grade not less than 8.8, make-LPS/TVS/UNBRAKO
SOC HD CAP SCREW M24X90 MOC-HT,Grade not less than 8.8, make-LPS/TVS/UNBRAKO
SOC HD CAP SCREW M22X90 MOC-HT,Grade not less than 8.8, make-LPS/TVS/UNBRAKO
HEX HD HT BOLT (HALF THREADED) M18X100 MOC-HT,Grade not less than 8.8, make-LPS/TVS/UNBRAKO
HEX HD HT BOLT( HALF THREADED) M20X100 with nut and washer MOC-HT,Grade not less than 8.8, make-LPS/TVS/UNBRAKO
SCREW HEX M33X90 MOC-HT,Grade not less than 8.8, make-LPS/TVS/UNBRAKO
SCREW HEX M36X100 MOC-HT,Grade not less than 8.8, make-LPS/TVS/UNBRAKO
SCREW HEX M36X180 MOC-HT,Grade not less than 8.8, make-LPS/TVS/UNBRAKO
SOC HD CAP SCREW M12X40 with nut and washer MOC-HT,Grade not less than 8.8, make-LPS/TVS/UNBRAKO
SCREW HEX M36X110 MOC-HT,Grade not less than 8.8,60 make-LPS/TVS/UNBRAKO
SPRING WASHER DIA 36 MOC-HT,Grade not less than 8.8, make-LPS/TVS/UNBRAKO
HEX HDM 12X120 MOC-HT,Grade not less than 8.8, make-LPS/TVS/UNBRAKO
BOLTS, HALF FINE THREADED (1MM PITCH) M18X100 with nut and washer MOC-HT,Grade not less than 8.8, make-LPS/TVS/UNBRAKO
SCREW HEX P M 16X50 with nut and washer MOC-HT,Grade not less than 8.8, make-LPS/TVS/UNBRAKO
HT HEX HEAD BOLT with nut and washer M16X80 MOC-HT,Grade not less than 8.8, make-LPS/TVS/UNBRAKO
HT HEX HEAD BOLT with nut and washer M12X40 MOC-HT,Grade not less than 8.8, make-LPS/TVS/UNBRAKO
HT HEX HEAD BOLT with nut and washer M12X120 MOC-HT,Grade not less than 8.8, make-LPS/TVS/UNBRAKO
HT HEX HEAD BOLT with nut and washer M10X80 MOC-HT,Grade not less than 8.8, make-LPS/TVS/UNBRAKO
HT HEX HEAD BOLT with nut and washer M16X60 MOC-HT,Grade not less than 8.8,
SS NUT M16 MOC-HT,Grade not less than 8.8, make-LPS/TVS/UNBRAKO
Allen Bolt, quarter thread M10X200 required for clamping cylinder head Make- TVS/Unbrako
HT Coupling Bolts, with bush and nut, size M16X80 required for apron gear box Make- TVS/Unbrako
HT Hex Bolt, 10.9 Grade, Half Threaded along with Nylock nut M16X70 required for clamping pad, section gear and cylinder guard Make- TVS/Unbrako
Hex Nylock nuts M-16 required for section gear Make- TVS/Unbrako
HT 8.9 Grade bolts, Half Threaded along with matching nuts M24X120 required for apron foundation bolt Make- TVS/Unbrako
HT 8.9 Grade bolts, Half Threaded(1 mm pitch) along with matching nuts M24X80 required for apron gear box coupling Make- TVS/Unbrako
HT 8.9 Grade Bolts, Full threaded along with matching nuts M10X70 required for tippler stand Make- TVS/Unbrako
HT 8.9 Grade bolts, Half threaded along with matching nuts M16X100 required for support of rubber pad Make- TVS/Unbrako
HT 8.9 Grade bolts, Half threaded along with matching nuts M16X40 required for servo motor of tippling Make- TVS/Unbrako
HT 10.9 Grade bolts, Half Threaded(1 mm pitch) along with matching nuts M40X320 required for main housing of tippler Make- TVS/Unbrako
HT 10.9 Grade bolts, Half Threaded(1 mm pitch) along with matching nuts M30X150 required for coupler of SAC boom and rack & pinion Make- TVS/Unbrako
HT 10.9 Grade bolts, Half Threaded(1 mm pitch) along with matching nuts M24X200 required for SAC rail fixing Make- TVS/Unbrako
HT 10.9 Grade bolts, Half Threaded(1 mm pitch) along with matching nuts M30X200 required for apron hausing base Make- TVS/Unbrako
HT 8.9 Grade bolts, Half Threaded(1 mm pitch) along with matching nuts M20X70 required for guide roller fixing Make- TVS/Unbrako
HT 8.9 Grade bolts, Half Threaded(1 mm pitch) along with matching nuts M20X180 required for apron hausing Make- TVS/Unbrako
HT 8.9 Grade bolts, Half Threaded(1 mm pitch) along with matching nuts M20X130 required for apron foundation Make- TVS/Unbrako
HT 10.9 Grade bolts, Half Threaded(1 mm pitch) along with matching nuts M24X130 required for apron foundation Make- TVS/Unbrako
HT 8.9 Grade bolts, Half Threaded(1 mm pitch) along with matching nuts M24X100 required for tippler support beam Make- TVS/Unbrako
HT 8.9 Grade bolts, Half Threaded(1 mm pitch) along with matching nuts M24X70 required for rack pinion of side arm charger and plateform locking Make- TVS/Unbrako
SHAHJAHAN ENGINEERING WORKS
Indian Machine Tools
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .