Supply and installation of phase wire and CCMS panel.

Supply and fixing of following LT Supporting accessories with nut bolt & Clamps made out as per standard Discom's specifications with two coats of Red oxide and two coats of Aluminium paint etc. as required. All as per pre approved by Engineer in-charge.For additional technical parameters of product / work refer Annexure 'A' attached with this BSR (a) LT cross arm 600 mm long with clamp

Supply and fixing of LT porcelain shackle insulator as per IS:1443 1979 and as per Discom's standard specifications, suitable for working voltage 1100 volts including all accessories like GI Hardware fittings confirming to IS:7935/1975 (latest amended) Nut, Bolt etc. as required. All as per pre approved by Engineer in-charge.For additional technical parameters of product / work refer Annexure 'A' attached with this BSR (b) 100mm x 110mm

Supply and fixing of LT porcelain pin insulator as per IS 1445- 1997 and as per Discom's standard specifications,suitable for working voltage 1100 volts including all accessories like MS Forged GI LT Pin confirming to IS:7935/1975 (latest amended) Nut, Bolt etc. as required. All as per pre approved by Engineer in charge.For additional technical parameters of product / work refer Annexure 'A' attached with this BSR 100 mm x 70 mm

Supplying and drawing of XLPE insulated LT Aerial bunched Aluminium conductor cable confirming to IS 14255/1995 and IS 398 (Pt-4)/ 1994 and as per Discom Specs. on existing cross arms through I hook with all necessary T&P required including binding and twisting etc. complete in all respect as required. All as per pre approved by Engineer in-charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR . (b) 1 X 25 sq. mm. + 1X25 sq. mm. (insulated)

SITC of IK 10 & IP65 3 phase 440V 50Hz, 7.5kw capacity centralized control and monitoring system panel (CCMS) made of fire retardent SMC steel material having lock system suitable for schedule on/off of Led & garden lights having following provision: Dedicated control & metering unit. pre programmed on/off schedule& remote on/off operation in case of bad weather/emergency/maintenance. Bypass faciltiy per phase. Data capture of Energy consumption & other electrical data in real time & at pre deterimned interval. RTC controller should be type tested in NABL approved lab & should be compitable with communication module 2G/4G which transmit data wirelessley and recorded to dedicated server or on cloud based architecture and aslo give command for schedule on/off of cluster of lights. Latiching relay/Bi-stable switch/isolation device should conferming to IEC-61- 36/61037 & contactor also conferming to relevant IEC/IS standard13779.MCB conferming to IEC-62053/62054. With included Controller also have functional specification is for A) Lux sensor & Astronomical Clock mode :- 1)For switching ON---- < 60 lux for >30 sec or Twilight Duskwhichever is later 2)For switching OFF--->10 lux for >30 sec OR twilight Dawn whichever is carlier and B) for time schedule mode For switching ON/OFF---Time selected by user *Controller should connected to separate lithium battery to provide back up of minimum 8 hours in case of power outage.*unit should be supported by web/app based software package with detail information dashboard. *pole mounting/surface mounting stand. *inclusive of 2 year server & website hosting charges. Comprehensive on-site warranty of above Central Control & Monitoring System (CCMS)- Street Light Controller including SIM card or any other maintenance charges for 2 years.

Providing & Laying P.V.C. / XLPE insulated & P.V.C. sheathed Arrmoured Aluminium cable confirming to IS:1554 P-I / IS :7098 P - I of 1.1 KV with H4- Grade electrolytic aluminium conductor confirming to IS 8130 of purity >99.6 %, round / flat strip armouring of cables, Inner / outer sheath confirming to IS:5831 in existing RCC / Hume / Stoneware / PVC pipe/ open duct/cable trench / Cable tray(with cable tie) including testing etc. as required of following size. OEM must have it's own in house NABL accrediated Laboratory for testing procedure as per IS:10810.For additional technical parameters of product / work refer Annexure 'A' attached with this BSR 16.0 Sq. mm 4 CORE