Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
Tender Value
₹5 L
EMD Value
₹5,000
Closing Date
22 Nov 2024, 3:00 pmClosed
BDO,ARANTHANGI
PT UNION OFFICE , ARANTHANGI
Construction of Co-location of CSC with Panchayat Bhawan at Silattur in Silattur Panchayat
2024_RDTN_503188_1
RRGSA 2024-25 SILATTUR
Open Tender
Civil Works - Buildings
Item Rate
180 days
ARANTHANGI
Please refer Tender documents.
2 documents required · 2 mandatory
₹0
₹5,000
22 Nov 2024
21 Nov 2024
22 Nov 2024
21 Nov 2024
22 Nov 2024
21 Nov 2024
Amount
Construction of Co-location of CSC with Panchayat Bhawan at Silattur in Silattur Panchayat
Earth work excavation in all classes of soil such as hard stiff clay hard red earth, earth murrams gravel stoney earth, earth mixed with fair size boulders as per SS 20B for foundation.etc., complete
Filling with course gravel including cost and conveyance to work site including all labour charges for filling etc complete
Filling with M.sand including cost and conveyance of all materials to work side and all labour charges etc complete
Cement Concrete 1:4:8 mix using 40mm ISS HBG metal including cost and conveyance to work site including all labour charges for filling etc complete
R.C.C. 1:11/2:3 mix using 20mm ISS HBG metal including cost and conveyance to work site including all labour charges for filling etc complete
Brick work in cm1:5 mix using country bricks of size 8 3/4" x 4 1/4" x 2 3/4" including cost and conveyance of all materials of all materials to site and labour charges etc. complete
Supplying and Fabrication of steel for RCC works including all cost of cutting bending and tying of steels and kept ready for concrete in position etc.,
Supplying and errecting centring for sides and soffits of all RCC works including cost and conveyance of all materials to site and labour charges etc. complete
Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothy with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. The Surface shall then be allowed to dry for atleast 48 hours. It shall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface. Any unevenness shall be made good by applying 1st coat of putty mixed with water on the entire surface including filling up the undulations and applying 2nd coat of putty after 6 hours of 1st coat of putty and then sand papering (waterproof abrasive sheet) the same after it is dry and finishing the surface smoothly, etc., complete complying with standard specifications and as directed by the Departmental Officers. [ The rates are inclusive of hire charges for grinding machine with wheel, cost of sand paper (waterproof abrasive sheet), cost of putty blade, labour charges for grinding the joints and sand papering, two coat of putty, scrapping the putty area to level the surface smooth, etc., complete]. The Putty shoule be got approved by the Executive Engineer before use on work.
Special ceiling plastering and finishing the exposed surface of all RCC items of work such as slabs, beams, sunshades, facia, canopy slab, staircase waist slab, landing slab etc., with Cement Mortar 1:3 (One Cement and Three M.Sand) 10mm thick including hacking the surfaces, providing cement mortar nosing etc.,complete
Plastering with Cement Mortar 1:5 (One cement and Five M.Sand), 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers.
Weathering Course Concrete to 80 mm thickness (average) using 20mm size Brick jelly with slacked lime in the proportion 32:12:50 (No sand to be used) including cost and conveyance of all materials to work site and all labour charges etc., complete.
Finishing with one layer of Pressed Tiles of size 20 cm x 20cm x 20mm embedded in Cement Mortor 1:3 mix mixed with Water Proofing compound and pointed with same mixed mortor to full depth of tiles etc., complete.
Paving the floor with best quality Vertified Tiles of size 600 x 600 x 8mm of approved colour, shade and quality laid in cement mortar 1:3 (one cement and three crushed stone M.Sand) 20mm thick in all floors and the top pointed with the white cement mixed same colour pigments etc., complete complying with standard specification.
Cost and supply of steel door of size 1.20 x 2.10 m including cost and conveyance of materials to work site and all labour charges etc.complete.
Cost and supply of steel Window of size 1.20 x 1.30 m including cost and conveyance of all materials and all labour charges etc., complete.
Supplying and painting the walls with two coats of oil bound distemper over one coat of water based cement primer including cost for distemper, primer, cleaning and scrapping the walls, rendering the walls smooth with necessary putty, brushes, scaffolding arrangements, labour charges, etc., as per standard specification. (The colour and shade of the distemper shall be got approved by the Executive Engineer before use of work).
Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification.
Painting Two coats of new iron works such as steel doors, windows, , window bars, balustrades, etc, with best approved first quality of synthetic enamel paint of approved colour over the existing priming coats, etc., complete
Wiring with 2 x 1.50 sqm ( 22/0.3 ) PVC insulated unsheathed single core Copper Conductor of 1100 v Grade in suitable PVC Rigid Pipe on wall and ceiling with PVC accesseries with TW Switch box with 5 A F . T . Switch with painting of suitable colour for Light Point and Fan Point
Wiring with 2x1.50 sqm PVC insulated unsheated Sc.alu Cable of conductor of 1100V grade insulated for open plug point .
supply and fixing of 1200mm sweep AC ceiling fan complete with stepped electronic regulator with 300mm down rod on the existing clamp SD 106
Supply and fixing of 4'-18W LED tube with fitting inclusive of all charges M1211
Supply and fixing of water tight Bulk Head fitting with guard (Philips / Bajaj / Crompton / Klite) suitable for incandencent lamp and 15W bulb (SD N0.83)
Supply and fixing run off 2x1.50sqm PVC insulated Sc . Un sheated Sc conductor of 1100 v grade on 7/20 GI Bearer wire for Service Main
Supplying and fixing cuddapah slab for cupboard shelf
Supplying and fixing PVC Rain water down fall pipes of following dia meter etc., complete.
GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}
R. GANESAN (BID ID -1190712)
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .