CERTAIN REPAIRS TO CEILING LIGHTS, BUILDING SECURITY LIGHTS,GATE LIGHTS,BOLLARDS AND OTHER CONNECTED WORKS AT TRAINING WINGS, OFFICERS MESS,GENERAL BENGLOWS UNDER GE (AWC), MHOW

Amount

S&F in replace recess mounted downlight 15 watts 175 mm dia with white powder coated polycarbonate housing and pressure die-cast heat sink having high efficiency with heavy duty driver of lumen out put color off white/yellow all as specified and directed incl taking down carefully old/unsv recessed fittings from POP ceiling.

S&F in replace repairs sleek round surface mounting LED down light 18 Watts with cover frame, 23 V, 50 Hz , 220 mm dia complete with Aluminium die cast body, finish with drop down PC diffuser to deliver low glare illumination with optimised heat sink for efficient heqat dissipation complete incl electronic driver, outer cover all as specified and directed.

S&F in replace recess mounted downlight 6 watts 105 mm dia with white powder coated polycarbonate housing and pressure die-cast heat sink having high efficiency with heavy duty driver

S&F in replace recess mounted spot light with reflector 2 watts 65 mm dia with white powder coated polycarbonate housing and pressure die-cast heat sink having high efficiency with heavy duty driver.

S&F in replace LED bldg security light fitting 30 watts made up of pressure die cast aluminium housing with acylic cover as diffuser with IP-65 and IK-07 protection, THD < 10% , lumen output ≥ 110 lumen per watt complete all as specified and directed.

S&F in replacing post Top lantern LED type 25 watts suitable for mounting in GI post 32 mm to 50 mm size (ballest and SPDs inside lantern base) with suitable bolts/ screws complete incl necessary welding ,threading with tap and dies all as specified and directed at site

S&F in replace GI mounting pipes of building security light fittings of size 32 mm to 40 mm size upto 1.2 mtr length bend into sizes incl mounting clamps , saddles, uit bolt and washers all as specicified and directed.

M&L for flexible wire twisted 23/0076 of size 1.5 sq mm for replacing from ceiling rose to ligth fiitings/ceiling fan/exhaust fans complete all as specified and directed.

S&F in replace 3 core copper flexible cable 2.5 sqmm complete all as specified and directed.

M&L for XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 06 sq. mm 2 core fixed on wall/ceiling by saddling with suitable screws , laying in ground all as specified and directed.

M&L for XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 10 sq. mm 2 core fixed on wall/ceiling by saddling with suitable screws , laying in ground all as specified and directed.

Excavation in trenches not exceding 1.5 meter depth and 1.5 meter in width in loose/ soft soil for laying of cable/errection of pole getting out soil complete all as specified and directed.

Returning filling incl spreading , levelling, watering and well ramming in layers not exceding 25 cm complete all as specified and directed

Removing excavated materials not exceding 50 mtr and depositing where directed at a level not exceding 1.5 mtr above the starting point complete all as specified and directed

Material and Labour for replacing PCC cable cover class LV , flat size 250x150x40 mm size complete all as specified and directed

M&L for replacement of FRP junction box , IP 66 protection three terminal and neutral with one MCB SP 20 A and acrylic cover for MCB protecttion for control of security light from PCC pillar of gates/post top lantern base coping incl making good of PCC and finishing with cement rendering complete all as specified and directed.

M&L for repair/replacing of PCC of post top lantern/FPB/bollards incl necessary form work ,cement mortar work 1:4 for finishing complete incl two coat of distumbering as per approved colour after applying cement primer all as specified and directed

M&L for fixing GI pipe 65 mm bore medium grade of suitable length as directed at site and making standing pole for post top lantern in existing RCC pillar with necessary breaking of RCC pillar top ,cutting Existing GI Pipe 50 mm size , welding with 65 mm GI pipe including fixing FRP looping box at bottom of pillar ,casting of PCC , making good disturbed surface with PCC, cementing, Plastering incl painting all as specified and directed . Note: PCC ,GI pipe 65mm, Necessary excavation and FRP loopng box will be measured and paid seperrately as per relevent item in schedule.

M&L for replacing GI pipe 63 to 65 mm dia medium grade for fixing post top lantern all as specified and directed.

M&L for replacing GI tubings light grade for cable protection 50 mm size complete all as specified and directed.

M&L for surface mounted LED fitting 36 watts, 2 ft x 2 ft fittings suitable for RCC ceiling, lumen out put ≥ 110 lumen/watt ,THD < 10% environmental friendly, new generation,aesthetically designed, ultra modern recess mounting luminaire with high brightness SMD LEDs as light source,incl inbuilt drivers incl making good of disturbed surfaces during installation all as specified and directed.

M&L for LED ceiling fitting 33 to 36 watts, 2 ft x 2 ft fittings suitable for aluminium grid ceiling, lumen out put ≥ 122 lumen/ watt,THD < 10% environmental friendly, new generation, aesthetically designed, ultra modern recess mounting luminaire with high brightness SMD LEDs as light source,incl inbuilt drivers suitable for Grid ceiling complete with atration of aluminium frame work wherever necessary during installation all as specified and directed.

Description same as per Sl. item No. 22 here in above but of 42 to 48 watts.

Supply and fix in repairs Post Top Lantern 25 watts fully aluminium cast body finished with polyurethane paint(with prior treatment) with acrylic window cover .Total length 635 mm and Max breadth 323mm, heritage look ,spigot entry 78mm as per IS 10322 complete incl altration in mounting by welding/threading/placing addl GI socket to place lantern truely vertical in position all as specified and as directed.

Supply and fix in repairs Bollard 20 watts fully aluminium cast body finished with polyurethane paint(with prior treatment) of length 647 mm and circular base dimeter of 139mm and max dimeter of leg of bollard 76 mm surmounted with fully cast aluminium body finished with polyurethane paint with acrylic window. Total length of bollard fittings : 1181mm. Model No MBL-D-002 of Make Mepro electricals/ equivalenet in Crompton/ Bajaj

Supply and fix in repaire Architectural designed aluminium cast extra heavy duty pole mounted post top lantern incl heavy duty leg and boarder deigner base with broader plate 422MMx422MM finished with olyurethane paint ( with all prior treatement ) Diameter of pole leg is approx 76mm. Outer dia for spigot entry 60 mm 03 Nos T shaped bolts with nuts and washers provided for concrete foundation Including 01 No Post top lantern Model No PTL003 and 02 Nos post top lantern model PTL03 along with squre junction made out of aluminium finished with max projection breadth of 880 mm suitable for three Nos post top lantern complete all as specifed and as directed. Mode No of Pole: MCPL 02 and model no of squre junction is CDPB04 of Mepro electricals/ equivalenet in Crompton/ Bajaj

M&L for bollard 09 watts made of extruded aluminium housing for land scaping with better light quality and enhance architectural design IP 65 protection, fixing in PCC foundation with suitable nut bolt and washers complete all as speciied and as directed. Model No BGBOLL6059WLED of Bajaj or equivalent make in Crompton/ Bajaj

M&L for LED Bulk head fitings of wattage 6 to 13 watts designed for modern homes available with premium quality diffuser for glarefree light and easy to install snapfit installer complete including taking down of old CFL/bulb bulk head fitting, making good of surfaces all as specified and directed.

M&L for decorative wall mounted luminare indoor application made out of stainless steel body with acrylic cover with LED bulb 9W , 230V, 50 Hz complete all as specified and directed . Cat NO LHFOAJE1TN1I060 of Havells or equivalent make in Jaguar/Crompton /Philips

M&L for decorative wall light made out of Die cast aluminium for exteriar wall glazing application 12 W , 230V, 50 Hz complete all as specified and directed . Cat No LW33-101-025-30-XX of Wipro or equivalent make in Philips/Crompton/bajaj

M&L for replacing Bay luminare Eco round highbay in PDC housing suitable for industrial application . The luminare has efficeincy of 110 lm/W complete all as specified and directed. Model No TIP-320-80-57-SL-NSG of Crompton make or equivalent in Bajaj/Havells/Philips

Supply and fixing strip light of 25 watts for COB lighting with IP 20 protection LED strip should be included LED driver for every 5 meter role and warrenty should be 2 years from the date of purchase and color temparature should be warm white incl fixing along along POP/wall pannel edges in prestigeous building all as specified and directed. Make: Bajaj Cat ref BPLS 25W STRIP IP65 AM / equivalent make in Philips/Crompton

M&L earthing complete with galvanised steel earth plate electrode of size 600 x 600 x 6 mm thick buried directly in ground in vertical position (earth pit not less than 2.25 m deep below the normal ground level) with top edge of the earth plate not less than 1.5 m below normal ground level, connected to GI earth wire 4 mm dia by means of bolts, nuts, check nuts and washers of , all as shown in electrical plate No. 3 connected to earthing test point and complete all as specified and directed. Note:- The unit rate shall also include for earth work in any type of soil, PCC 1:3:6 type C-1 (using 20 mm grade crushed stone aggregate) earth chamber, RCC 1:1.5:3, type A-1 cover slab, 40 mm thick reinforced with 6 mm dia TMT bar @ 150 mm C/C both ways, 10 mm dia plain bar lifting handle embedded in cover slab, 20 mm bore medium grade GI watering pipe, 15 mm bore GI light grade earth lead protection pipe, funnel, wire mesh, copper lugs, charcoal and common salt in alternate layer etc.

Vinayak Trading House

Auto Traders

Ms Kailash Chandra Babulal