Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹31 L
EMD Value
₹62,000
Closing Date
13 Sept 2024, 5:30 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Facilities Management Division, Bangalore
HINDUSTAN AERONAUTICS LIMITED Facilities Management Division, Bangalore
Repair Rectification and Assorted Civil Works at Executive Canteen, AS 6 to 9 Substations, HR 89 , GI Store at Aircraft Division, HAL BC.
8596
TENDER NOTICE/NCP/14/24-25
Works
Contract Section Civil-FMD-Bangalore
₹0
₹62,000
13 Sept 2024
4 Jul 2024
4 Jul 2024
13 Sept 2024
Name of the Individual / Firm / Company: * Mandatory
Type of ownership
Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, Contractor registration No etc.,
Address for correspondence:
PAN No.:
Service Tax Registration No
Goods and Service Tax ID No.
Contact details
Please Enter Contact person Name
Pls Enter Mobile No
Registered Contractor
Average annual financial turn over during the last 3 years, ending 31st March 2023 of the previous financial year [ should not be less than 30% of Amount put to tender]
TURN OVER IN Rs.
Pls Enter Turn over in Rupees for all the 3 years
ESI & PF Nos with proof
Remarks if any
Bank(s) details: [Copy of the cheque leaf to be uploaded]
Related Document to be Uploaded to eProcurement Portal (Note Canceled cheque leaf to be uploaded)
Latest Bankers Solvency Certificate from Nationalized/ scheduled Bank issued NOT before 12 months from the last date of Tender submission
Pls Enter Details to 'Name of the Bank' , 'Date of Issue','Value in Rs
Experience of having successfully completed similar works during last 7 years ending last day of previous month. [Latest work experience certificate may be uploaded] (i) THREE similar completed works each costing not less than the amount equal to 40% of the estimated cost. (ii) TWO similar completed works each costing not less than the amount equal to 50% of the estimated cost. (iii) ONE similar completed work each costing not less than the amount equal to 80% of Amount put to the tender.
Type of Work: [ Incase of private works the same shall be supported with TDS certificate]
Please enter Details for Work No 1
Type of Work: [ Incase of private works the same shall be supported with TDS certificate]
Pls Enter Details for Work No II
work done
Type of Work: [ Incase of private works the same shall be supported with TDS certificate]
Pls Enter Details for Work No III
Details of person holding the power of Attorney (If different from contact person)
Related Document to be Uploaded to eProcurement Portal
Pls Enter Details for Person holding Power of Attorney
DECLARATION I
DECLARATION II
Pls Accept the Delaration II
Specification
Demolishing brick work built in cement mortar, manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50metres lead, etc., all complete as directed by Engineer-in-Charge.
Demolishing cement concrete of nominal 1:4:8 or leaner mix manually / by mechanical means including disposal of material within 50metres lead, etc., all complete as directed by Engineer-in-Charge.
Dismantling of old plaster or skirting, raking out joints and cleaning the surrface for plaster including disposal of rubbish to the dumping ground within 50meters lead, etc., all complete as directed by Engineer-in-Charge.
Disposal of moorum / building rubbish / malba / similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead up to 10km for all lifts, etc., all complete as directed by Engineer-in-Charge. Note: Item to be applicable in urban areas having direction for restricted hours for movement / plying of laod carrying motor vehicke of 3.5-Cu m or more, etc., all complete as directed by Engineer-in-Charge.
Earth work in surface excavation in all kinds of soil not exceeding 30cm depth but 1.50m in width as well as 10Sq m on plan inlcuding getting out and disposal of excavated earth up to 50m and lift up to 1.50m, etc., all complete as directed by Engineer-in-Charge.
Filling available earth (excluding rock) in trenches, plinth, sides of foundation, etc., in layers not exceeding 20cm, consolidated each deposited layer by ramming and watering lead up to 50m and foll all lift, etc., all complete as directed by Engineer-in-Charge.
Brick work in Cement mortar 1:4 (1 cement : 4 coarse sand) with common burnt clay F.P.S. (non modular) bricks class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes, etc., all complete as directed by Engineer-in-Charge.
Half brick masonry in Cement mortar 1:3 (1 cement : 3 coarse sand) with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level, etc., all complete as directed by Engineer-in-Charge.
Providing and laying plaster mix 1: 6 ( 1 cement : 6 coarse sand) of 15mm thick plaster on the rough side of single or half brick wall, etc., all complete as directed by Engineer-in-Charge.
Providing and laying in position cement concrete of specified grade(1:4:8 -1 cement :4 manufactured sand derived from Recycled concrete aggregates:8 graded stone aggregates 40mm nominal size recycled aggregates) excluding the cost of centering and shuttering - All work up to plinth level, etc., all complete as directed by Engineer-in-Charge.
Providing and laying cement concrete (1:2:4-1 Cement : 2 coarse sand (zone-III) including manufactured sand derived from Recycled Concrete Aggregate (RCA) upto 25% : 4 graded stone aggregate 20 mm nominal size including Recycled Concrete Aggregate (RCA) upto 25%) in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing, etc., all complete as directed by Engineer-in-Charge.
Steel reinforcement(Thermo-Mechanically Treated bars of grade Fe-500D or more.)for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete up to plinth level, etc., all complete as directed by Engineer-in-Charge.
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, etc., all complete as directed by Engineer-in-Charge.
Centering and shuttering including strutting, propping, etc., and removal of form work for small lintels not exceeding 1.50m clear span, moulding as in cornices, window cills, string course, bands, copings, bed plates, anchor blocks and the like, etc., all complete as directed by Engineer-in-Charge.
Providing and Fixing of alumnium sliding door bolts [300 x 16]mm size, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) tranparent or dyed to required colour or shade with nits and screws, etc., all complete as directed by Engineer-in-Charge.
Providing and Fixing alumnium tower bolts [250 x 10]mm size, ISI marked, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) tranparent or dyed to required colour or shade with nits and screws, etc., all complete as directed by Engineer-in-Charge.
Providing and Fixing alumnium handles 125mm long, ISI marked, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) tranparent or dyed to required colour or shade with nits and screws, etc., all complete as directed by Engineer-in-Charge.
Providing and Fixing alumnium hanging Single rubber floor door stopper, ISI marked, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) tranparent or dyed to required colour or shade with nits and screws, etc., all complete as directed by Engineer-in-Charge.
Providing and fixing bright finished brass 100mm mortice latch and lock ISI marked with six levers and a pair of anodised (anodic coating not less than grade AC 10 )alumnium lever handles of approed quality with necessary screws, etc., all complete as directed by Engineer-in-Charge.
Providing and Fixing alumnium extruded section body tubular type universal hydralic door closer (having brand logo with ISI mark) embosed on the body, door weight up to 36kgs to 80 kg and door width from 701mm to 1000mm) with double speed adjustement with necessary accessories and screws, etc., all complete as directed by Engineer-in-Charge.
Providing and fixing ISI marked oxidised MS door latches of size [300 x 20 x 6]mm conforming to IS 5930 with screws (copper oxidised as per IS 1378), etc., all complete as directed by Engineer-in-Charge.
Providing and applyingwater thinnable cement primer on wall surface having VOC content less than 50 grams/litre, etc., all complete as directed by Engineer-in-Charge.
Providing and applying white cement based wall care putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth, etc., all complete as directed by Engineer-in-Charge.
Wall painting Two coats with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour, etc., all complete as directed by Engineer-in-Charge.
Finishing walls with Premium Acrylic Smooth exterior paint(Two or more coats applied @ 1.43 ltr/ 10 sqm) over existing painted surface cement paint surface) with Silicone additives of required shade, etc., all complete as directed by Engineer-in-Charge.
Painting one or more coats with Aluminium paint of approved brand and manufacture of required colour to give an even shade on old work, etc., all complete as directed by Engineer-in-Charge.
Painting one or more coats with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade on old work, etc., all complete as directed by Engineer-in-Charge.
Providing and Fixing 1mm M.S. Sheet door with frame of [40 x 40 x 6]mm angle iron and 3mm M.S. gusste paltes at the junctions and corners all necessary fittings complte inlcuding applying a priming coat of approved steel primer.A. using M.S. Angles 40x40x6mm for digonal brances, etc., all complete as directed by Engineer-in-Charge.
Removing dry or oil bond distemper ,water proofing cement paint and the like by scrapping ,sand papering and preparing the surface smooth including necessary repairs to scratches, etc., all complete as directed by Engineer-in-Charge.
Distempering one or more coats with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour, etc., all complete as directed by Engineer-in-Charge.
Providing and fixing Powder coated aluminium(min thickness of powder coating 50 microns) work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge. (Glazing, paneling and dash fasteners to be paid for separately)
For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15), etc., all complete as directed by Engineer-in-Charge.
Providing and fixing 12mm thick pre-laminated particle board (decorative lamination on one side and balancing lamination on other side) flat pressed three layer or graded wood particle board confirming to IS:12823 Grade I,type II, in panelling fixed in aluminium doors, windows, shutters and partition frames with C.P. brass/stainless steel screws, etc.,complete as per architectural drawings and directions of Engineer-in-Charge. Pre-laminated particle board with decorative lamination on both sides.
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions, etc., with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-Charge With float glass panes of 5.0 mm thickness (weight not less than 12.50 kg/sqm), etc., all complete as directed by Engineer-in-Charge.
Supplying, fabricating and fixing single skin trapezoidal profiled precoated coloured sheet of approved colour,shape and size for roofing,cladding, flashing, curves, gutters etc., The sheet shall be of 930-1020mm cover width with 28-32mm crest depth at 186-250mm c/c manufactured out of 0.5mm (TCT) total coated thickness high tensile steel plain sheet with aluminum Zinc alloy coating substrate The profile and length of the sheet shall be to suit with site requirement. The steel base material shall have 550Mpa yield strength made out of cold rolled steel and shall be coated with anti corrosive layer of Zinc aluminum alloy coating,Zinc 43.5% and aluminium 55% with minimum 150 gms/m² mass total on both sides.
Supplying and fixing of 2mm thick corrugated polycorbonate sheet of required size or colour including fastening it using No.14-10X20mm (or as per design) galvanized hex-self drilling fasteners of appd. make and quality including neoprene washer connecting with purlins/pre cast RCC beam(purlins).All side & on each crest of sheet for end laps shall be adequate to make the roof leak proof, etc., all complete as directed by Engineer-in-Charge.
Providing and fixing white Vitreous china wash basin size [630 x 450]mm with C.I. brackets, 15 mm C.P. brass pillar tap, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required, etc., all complete as directed by Engineer-in-Charge.
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931, etc., all complete as directed by Engineer-in-Charge.
Providing and fixing P.V.C. waste pipe (Semi regid pipe 32mm dia) for sink or wash basin including P.V.C. waste fittings, etc., all complete as directed by Engineer-in-Charge.
Providing and Fixing 100mm nominal dia circular type PTMT grating of approved quality and colour, etc., all complete as directed by Engineer-in-Charge.
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes, etc., all complete as directed by Engineer-in-Charge.
75mm diameter
110mm diameter
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. For External work
15 mm nominal dia Pipes
20 mm nominal dia Pipes
25 mm nominal dia Pipes
Providing and fixing 18mm thick Granite slab gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels: Granite stone slab colour black, Cherry/Ruby red: & Area of slab over 0.50Sq m, etc., all complete as directed by Engineer-in-Charge.
Extra for providing opening of required size & shape for wash basin/kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges, etc., all complete as directed by Engineer-in-Charge.
Providing and fixing tiled false ceiling of specified materials of size [595 x 595]mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams / sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size [24 x 38]mm made from 0.30mm thick (minimum) sheet, spaced at 1200mm center to center and cross "T" of size [24 x 25]mm made of 0.30mm thick (minimum) sheet, 1200mm long spaced between main "T" at 600mm center to center to form a grid of [1200 x 600]mm and secondary cross "T" of length 600mm and size [24 x 25]mm made of 0.30mm thick (minimum) sheet to be interlocked at middle of the [1200 x 600]mm panel to form grids of [600 x 600]mm and wall angle of size [24 x 24 x 0.30]mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc., Main "T" runners to be suspended from ceiling using GI slotted cleats of size [27 x 37 x 25 x 1.60]mm fixed to ceiling with 12.50mm dia and 50mm long dash fasteners, 4mm GI adjustable rods with galvanised butterfly level clips of size [85 x 30 x 0.80]mm spaced at 1200mm center to center along main T, bottom exposed width of 24mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by EIC.
Finishing with epoxy paint (two or more coats) at all location prepared and applied as per manufacturer's specifications inlcuding appropriate priming coat ,preparation of surface etc all complete on concrete surface, etc., all complete as directed by Engineer-in-Charge.
Providing and fixing Stainless steel A ISI 304 (18/8) kitchen sink with drain board of size [510 x 1040]mm bowl depth 250mm with CI Brackets and stainless steelpugs 40mm including painting of fittings and brackets cutting and making good the walls wherever required, etc., all complete as directed by Engineer-in-Charge.
Rupees Twenty Six Lakh Twenty Six Thousand Five Hundred Sixty Two and Ninety Six Paise Only
Approximate Amount Put to Tender
Rupees Four Lakh Seventy Two Thousand Seven Hundred Eighty One and Thirty Three Paise Only
Rupees Thirty Lakh Ninety Nine Thousand Three Hundred Forty Four and Twenty Nine Paise Only
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
raw.json
RAW_JSON
TN14.pdf
TENDER_DOCUMENT • 2.56 MB
30PQF.xlsm
TENDER_DOCUMENT • 0.03 MB
30PBF.xlsm
TENDER_DOCUMENT • 0.05 MB
30Undertaking.pdf
TENDER_DOCUMENT • 0.55 MB
30Checklist.pdf
TENDER_DOCUMENT • 0.17 MB
TenderDrawing.pdf
TENDER_DOCUMENT • 0.80 MB
30ECSForm.pdf
TENDER_DOCUMENT • 0.46 MB
30TB.pdf
TENDER_DOCUMENT • 2.59 MB
30PQ.pdf
TENDER_DOCUMENT • 0.21 MB
30PB.pdf
TENDER_DOCUMENT • 0.35 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .