REPAIRS TO JOINERY AND CONNECTED CIVIL WORKS AT KANPUR

Amount

Taking down cement plaster from brick or stone walls etc including raking out joints, hacking for key scrubbing down with water etc complete all as specified and directed.

M&L for 15 mm thick rendering in cement mortar 1:4 on fair faces of concrete or brick surface finished even and smooth without using extra cement complete all as specified and directed.

M&L for 15 mm thick rendering in cement mortar 1:6 on fair faces of concrete or brick surface finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying three coats of white wash complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying two coats of cement based paint over and including a coat of primer complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper over and including a coat of primer over a coat of putty as per manufacturer instructions complete all as specified and directed.

Dismantling of floor hearth or wall tiling including cement mortar bedding (but not backing) and clearing rubbish off the premises complete all as specified and directed.

M&L for glazed ceramic coloured tiles 300mmx450mmx6 to 7 mm thick on vertical surfaces such as skirting/dado set and jointed in neat cement slurry and pointed in colour cement to match the shade of tile over and including 10mm thick rendering in CM (1:4) completed all as specified and directed.

M&L for 7 to 8 mm thick non skid ceramic coloured tiles (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm as in floors etc, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match with shade of tiles over and including 15 mm thick screed bed in CM (1:4) complete all as specified and directed.

Taking down chowkhats or frames with shutter (without taking off shutters from the frame) area n.exc. 1.50 Sqm each complete all as specified and directed.

Taking down chowkhats or frames with shutter exc 1.5 Sqm but not exceeding 4 Sqm each (without taking off shutters from the frames) complete all as specified and directed.

Taking down shutter of any description n.exc 1 sqm each complete all as specified and directed.

Taking down shutter of any description of area exc 1 Sqm but not exc 2 Sqm each complete all as specified and directed.

M&L second class hard wood as in plain, solid, straight chowkhats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

S&F for 35 mm thick second class hardwood, factory made, glazed and skeleton shutter, open rebated and prepared to receive glass, gauge etc (without sash bar) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, gauge etc ; size of members of shutter as specified in SSR Part-I Section 8 clause 8.24 (a) and fixed to chowkhats complete all as specified and directed.

S&F 35mm thick second class hardwood Plain framed, panelled shutter (two panel) with lock rail and panel of 9mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part-1), kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F of 32 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

M&L for preparation of new surfaces of wood of any description not otherwise described over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Dismantling of boarding, any description fixed in any position with nails complete all as specified and directed.

S&F 19/20mm thick prelaminated Particle board, exterior grade prelaminated both sides with decorative choice lamination, fixed with nails/screw to timber frame work including liping work with teak wood beading 6mm thick as in Cup Board (CB) shutter, writing table and book shelf complete all as specified and directed.

S&F of 200 mm long barrel tower bolt aluminum anodized of extruded section complete all as specified and directed.

S &F 125 mm long aluminium anodised barral tower bolt of extruded section complete all as specified and directed.

S&F 300 mm long aluminum anodized sliding door bolt with hasp and staple and fixing clips of sheets, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminum alloy and fixed complete all as specified and directed.

S & F 100 mm butt hinges medium weight cold rolled mild steel ISI marked and fixed with mild steel wood screws complete all as specified and directed.

S&F 100 mm size Butt hinges, extruded aluminium alloy with galvanised mild steel pin, anodised and fixed, type C-21, complete all as specified and directed.

S&F 200 mm long, mild steel door spring including roller and roller plate complete and all as specified and directed.

S&F 150mm size extruded aluminium handle fabricated type anodised complete all as specified and directed.

S & F 125 mm size extruded aluminium handles fabricated type anodised complete all as specified and directed.

M&L factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Penelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed with copper screws to the styles & rails with suitable PVC sheet beading and joined together with solvent cement supplying & fixing in the frame at site complete all as specified and directed.

M&L Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supplying & fixing with copper screws in opening as per specification & drawing, including making good the damage wall with plaster or concrete, complete all as specified and directed.

M&L for preparation of new steel or iron surfaces of any description exceeding 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of zinc chrome red oxide primer complete all as specified and directed.

S&F framed work such as grills, grating etc. with ends of bars shouldered and or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

S&F factory made steel tubular window with side hung shutters including box type hinges with steel handle and steel peg stay complete with glazing bars dovetailed or welded complete all as specified and directed as per Drg No. LZ/C-TD/130 sheet 1/4 to 4/4.

S&F factory made steel tubular window with side hung shutter including box type hinges with steel handle and steel peg stay complete without glazing bars dovetailed or welded completed all as specified and directed as per Drg No. LZ/CTD/130 sheet 1/4 to 4/4.

S&F factory made steel tubular ventilators with top hung shutter including hinges, steel peg stay complete all as specified and directed as per Drg No. LZ/CTD/130 Sheet 1/4 to 4/4.

S & F 3mm thick sheet glass ordinary quality and glazing with oil putty in square n.exc. 0.5 Sqm in each pane complete all as specified and directed.

S &F 3mm thick figured glass pin head type and glazing with oil putty in squares n.exc 0.5 sqm in each pane complete all as specified and directed.

Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F galvanized mild steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.50 mm and fixed with tinned tacks or galvanized wire staples complete all as specified and directed.

S&F in repair galvanized mild steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.50 mm and fixed with tinned tacks or galvanized wire staples complete all as specified and directed.

M&L for framed work as in door or gates of angle or other section with gusset plates, rails, braces etc complete drilled for fixing of steel sheeting or other covering. Doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging also fastening and fixing complete all as specified and as directed.

S&F continuous (piano) hinges, brass bright finish or electro galvanised width of flaps (when open) in 30 mm complete all as specified and as directed.

S&F hasp & staple safety type of aluminium anodized with mild steel hinge pin including bolt to hinge plate and fixed with screw 125 mm size complete all as specified & directed.

S&F in repairs 25mm dia powder coated aluminium conduit as in curtain rod and fixed to and including 02 Nos of brackets complete all as specified and directed.

S&F in repairs fancy type PVC lattu suitable for 25mm dia curtain rod complete all as specified and as directed.

M&L for 2nd class HW plain fillets, square, rectangular or triangular in section clean sawn secured with nails or brads, sectional area exc 3 sqcm but not exc 6 Sqcm, complete all as specified nd directed.

Cutting holes in brick walls built in cement mortar for inserting hold fasts and making goods of dismantled portion in CM 1:3 or cement concrete 1:2:4 type B-1(using 20 mm graded stone aggregate) as required exc half brick wall but not exc full brick wall complete all as specified and directed.

S&F of 40x5mm rubber beading strip in bottom of door shutter etc complete all as specified and directed.

S&F of mild steel flat iron as in hold fasts etc, conforming to Fe-290 Gde-E-165 complete all as specified and as directed.

S&F 75mm long aluminium anodised extruded type door stopper of double legged with rubber shoe in bottom complete all as specified and directed.

S&F in repair 75mm long aluminium anodised extruded type door stopper of double legged with rubber shoe in bottom complete all as specified and directed.

Welding in repairs not exceeding 2.50 cm in length, thickness of metal to be welded not exc 6mm. complete all as specified and directed.

Welding in repairs exceeding 2.50 cm but not exceeding 5 cm in length, thickness of metal to be welded exc 6mm but not exceeding 9mm complete all as specified and directed.

S&F in repair 100mm M.S butt hinges with MS frame work by spot welding including necessary arrangement and handling of welding machine upto third floor of Bldg complete all as specified directed.

S&F in repair 75 mm M.S butt hinges with MS frame work by spot welding including necessary arrangement and handling of welding machine upto third floor of Bldgs complete all as directed.

S&F in repair mild steel 200mm long, mild steel door spring including roller and roller plate with MS frame work by spot welding including necessary arrangement and handling of welding machine upto third floor of bldg on wooden chowkhat by MS wooden screws complete all as specified and directed.

S&F in repair aluminium handles cast type, anodised of 125 mm size complete all as specified and directed.

S&F in repair aluminium, anodised barrel tower bolts of extruded section of 200 mm long complete all as specified and directed.

S&F in repair aluminium, anodised barrel tower bolt of extruded section of 150 mm long complete all as specified and directed.

S&F in repair aluminium, anodised barrel tower bolt of extruded section of 100 mm long complete all as specified and directed.

S&F in repair mortice lock 4 levers of mild steel of size 100 mm fixed to existing aluminium door including adjustment complete all as specified and directed.

S&F in repairs double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

S&F in repair door closer hydraulically regulated (aluminium die cast body) designation No. 3 universal type suitable for door shutter of 851 to 1000 mm width and of weight between 61 to 80 Kg complete all as specified and directed.

M&L for repairs to cup board including easing of CB shutters tightening of hinges or handles/knobs, hasp and stapple etc complete all as specified and directed.

M&L for repair to aluminum door shutter of any description including taking down and refixing with necessary adjustment/replacement to door spring/door closer/glass panes 5.50mm thick/12mm thick prelaminated particle board, aluminum rubber beading complete all as specified and directed. Note : Door spring/door closer/glass panes 5.50mm thick/12mm thick prelaminated particle board shall be measured and paid separately under respective items.

M&L for easing of door/window shutters of any size/any number of panels for easy closing/opening tightening of hinges or changing the position of hinges adjustments of tower bolts, sliding bolts etc complete all as specified and directed.

S&F in repair powder coated Aluminium door partly glazed (using 5mm thick glass) and partly panelled or fully Glazed (using 12mm thick both side prelaminated board ) door with bottom rail of section 114x44.5x1.5mm thick and middle and top rail and style of section 84x44.45x1.5mm thick including 125mm dia circular aluminium handle tower bolt, mortice lock of brass size 65mm vertical type with four levers, door stopper double leg, rubber beading and door spring, hinges (three Nos each side) etc and aluminium frame of section 100x44.45x2.00mm thick complete all as specified and directed.

S&F in repair anodised Aluminium door partly glazed (using 5mm thick glass) and partly panelled (using 12mm thick both side prelaminated board ) door with bottom rail of section 114x44.5x1.5mm thick and middle and top rail and style of section 84x44.45x1.5mm thick including 125mm dia circular aluminium handle tower bolt, mortice lock of brass size 65mm vertical type with four levers, door stopper double leg, rubber beading and door spring, hinges (three Nos each side) etc and aluminium frame of section 100x44.45x2.00mm thick complete all as specified and directed.

S&F in repair Aluminium anodised window and ventilator shutters, sliding type with two track without sash bars, aluminum section of size 40mmx20mmx1.5 mm fixed in aluminium anodised frame of section size 63.5mmx35.18mmx2mm including necessary jointing cleats, glazing clips, aluminium anodised snap beading, screws, aluminium beading, PVC packing, aluminium anodised fittings & fixtures with and including glavanised mild steel wire cloth 0.36 mm nominal dia of wire & average width of aperature 1.50 mm and fixed with tinned tacks or galvanised wire staples and necessary fittings & fixtures including powder coating of thickness n.exc 50 micron on all aluminum section, complete all as specified and directed.

S&F in repair Aluminium anodised window shutter, sliding type of size 40mmx20mmx1.5mm in section fixed in aluminum anodised frame of section size 63.5mmx35.18mmx2mm including necessary jointing cleats, glazing clips, aluminium anodised snap beading, screws, aluminium beading, PVC packing, aluminium anodised fittings & fixtures with and including 4.80 mm thick tinted glass with necessary beading/packing and necessary fittings & fixtures, complete all as specified and directed.

S&F aluminium chequered grills as on aluminium window, weight n.exc 0.50 Kg/sqm and fixed complete all as specified and directed.

M&L for overhauling of rolling shutter of size not exceeding 8 Sqm, without taking down from position, by applying grease for trouble free operation complete all as specified and directed.

Description all as per srl item no 72 above but area exc. 8 Sqm and not exceeding 12 Sqm complete all as specified and directed.

Description all as per srl item no 72 above but area exc. 12 Sqm and not exceeding 20 Sqm complete all as specified and directed.

Description all as per srl item no 72 above but area exc. 20 Sqm and not exceeding 26 Sqm complete all as specified and directed.

Taking down and refixing of rolling shutter at same location in trouble free operational condition of size not exceeding 8 Sqm complete all as specified and directed.

Description all as per srl item no 76 above but area exc. 8 Sqm and not exceeding 12 Sqm complete all as specified and directed.

Description all as per srl item no 76 above but area exc. 12 Sqm and not exceeding 20 Sqm complete all as specified and directed.

Description all as per srl item no 76 above but area exc. 20 Sqm and not exceeding 26 Sqm complete all as specified and directed.

S&F in repairs mild steel worm wheel and gear wheel fitted to suspension shaft of the rolling shutter and connecting rod respectively (excluding suspension shaft and connecting rod) complete all as specified and directed.

S&F in repairs Bevel gear with handle fitted to connecting rod (excluding connecting rod) complete all as specified and directed.

S&F in repairs 25mm dia connecting rod fitted to gear wheel and bevel gear complete all as specified and directed.

S&F in repairs mild steel lath section in single piece 1.20 mm thick with inter locking curls at both edges complete all as specified and directed.

Description all as per srl item No. 83 above but 0.9 mm thick complete all as specified and directed.

S&F in repairs Mild steel clips riveted at either ends and fitted on ends of lath section complete all as specified and directed.

S&F in repairs Mild steel cranked handle suitable for gear operated type rolling shutter complete all as specified and directed.

S&F in repairs Cast iron ball bearing for rolling shutter complete all as specified and directed.

S&F Mild steel sheet 1.00 mm thick as hood cover of any shape with flat iron stiffeners at both edges and fixed to the bracket plate complete all as specified and directed.

S&F in repairs safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and directed.

M& L for steel rolling shutters 1.25 mm thickness of laths without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer erected in position as indicated complete push pull or manual type complete all as specified and directed.

Taking down shutter of any description of area exceeding 2 Sqm but not exceeding 4 Sqm each complete all as specified and directed.

S&F in repair 5.5mm thick glass size exc. 0.5 sqm each panes fixed on aluminium door shutter with and including aluminium beading, rubber gasket etc. complete all as specified and directed.

S&F in repair 12mm thick prelaminated particle board both side with decorative choice laminations fixed on aluminium door shutter without including aluminium beading, rubber gasket etc. complete all as specified and directed.

S&F in repair mild steel spring of size suitable for existing rolling shutter complete all as specified and directed.

S & F in repair 3mm thick sheet glass ordinary quality and glazing with oil putty in square n.exc. 0.5 Sqm in each pane complete all as specified and directed.

S & F in repair 3mm thick figured glass pin head type and glazing with oil putty in squares n.exc 0.5 sqm in each pane complete all as specified and directed.

M/S MAA TARA TREATMENT PROJECT

JOG CONSTRUCTION

murty construction company

ARORA BROTHERS