RESERVED FOR SC CATEGORY Providing And Fixing of Mini Himast At Got hospital Ground And Negalur Road Divider

RESERVED FOR SC CATEGORY Providing And Fixing of Mini Himast At Got hospital Ground And Negalur Road Divider

Fabricating, supplying and erection of . ms long hot dip Galvanized Conical hot dip Pole with BSEN 10025 grade S355JO steel plate for shaft, IS 2062 for base plate with door opening arrangements, incl...

LED Flood Light : .Supply of LED floodlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injec...

Fixing halogen/metal halide /SVL/IL/LED floodlight fitting over existing pole / wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires. (P.No.45, I.No.13.5, of S.R. 22-23 ...

Fabricating supplying and mounting MS box made out SWG suitable for floor wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with...

Supplying and fixing angle iron frame work fabricated out of M.S. angle iron. and M.S. Flat.with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint .50x50x...

Supplying and fixing HRC fuse units base on existing switch / panel board. 32 to 63 Amps (P.No.11, I.No.5.9.2, of S.R. 22-23 PWD Ele SR)

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking ca...

Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C. (P.No.14, I.No.5.38 of S.R. 22-23 PWD Ele SR)

Supplying and fixing Microprocessor Based Astronomical timer Switch with using necessary bolts, nuts and washers. (P.No.16, I.No.5.48 of S.R. 22-23 PWD Ele SR)

Supply and fixing of 4pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13947. 60 to 7...

Supply and fixing polished wood board made of not less than 15mm thick plank on both sides of not more than 2 pieces and fixing the same to the wall using tapered inverted wooden plugs screws. 20"x20"...

Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers. 63Amps (P.No.10, I.No.5.7.3 of S.R. 2019-20 PWD Ele)

Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5 to 32/63 Amps three phase 4 wire whole current class-1 Accuracy Energy Meter. (P.No.14, I.No.5.35 of S.R. 22-23 PWD Ele SR)

Supplying of 1.1 KV LT UG cable XLPE or Heat resistant PVC insulated, PVC extruded Inner sheath armoured UG LT cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness in average +5%...

Labour charges for laying of 1.1 KV class UG cable in existing trench GI pipe/ stoneware pipe /on wall / on pole as required. In existing trench/duct. On wall/Structure 6 sqmm to 16 sqmm (P.No.41, I.N...

Digging of trench of 0.6m deep x 0.50 mtr wide refilling the trench to the required ground level and consolidating etc. complete. In soil (Ordinary) (As per Civil SR KSRB 1-2, P-7) (P.No.41, I.No.6.6....

Supply and laying double walled corrugated (DWC) HDPE pipe with necessary connecting sockets /couplings/tees/bends of same materials in existing trench as per IS 14930 part-II suitable for drawing und...

Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40mm dia 2.90mm thick GI pipe 2.5 mtr long buried in a pit . The pit shou...

Supplying and running GI/Copper conductor for grounding and (along with other wires in conduit system of wiring) using necessary suitable size clamps, nails, guttas/spacers etc. 12 SWG GI Wire (P.No.4...

Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and te...

Providing and laying in position plain cement concrete for Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates levelling course for all works in foundation. The granite/trap/basa...

Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub-structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 ...

Supplying, Fitting and Placing TMT Fe 550 Reinforcement in Foundation / Substructure / Superstructure complete as per Drawing and Technical Specifications. Issue Rate:- Ordr No.SEBC:TB:RATE:2022-23/ D...