REPAIR AND MAINTENANCE TO BOUNDARY WALL, FENCINGS AND GATES IN AIR FIELD AREA UNDER GE (AF) TECH AREA, AT AF STATION AGRA

Amount

Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars,etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed

Demolition of cement concrete (reinforcement cut as required to facilitate demolition) of any description in any position not otherwise specifically provided for complete all as specified and as directed

M&L for brick work built in CM (1:4) with sub class 'B' bricks straight or curved on plan exc 6m mean radius complete all as specified and as directed.

All as per item No 3.00 above but with old brick obtained from demolition under item No.1 above complete all as specified and as directed

Taking down cement plaster in cement or cement lime mortar on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc, including removal of debries out side MD land complete all as specified and as directed

M&L for rendering 15mm thick in CM (1:6) on fair faces of brick works or concrete surface finished even & smooth without using extra cement complete all as specified and as directed

Use & waste form work to sides of pillars, posts and columns for rough finished surface of concrete complete all as specified and as directed

M&L for RCC 1:2:4, type B1, using 20 mm graded stone aggregate as in columns, pillars, piers, posts and struts & similar RCC works complete all as specified and as directed.

M&L for steel reinforcement of TMT bars (Fe-500 Grade) 10 mm dia and over cut to length and bent to shape required including cranking bending spirally, hooking end and binding with mild steel wire ( annealed ) not less than 0.9 mm dia or securing with clips complete all as specified and as directed

M&L for steel reinforcement of TMT bars (Fe-500 Grade) 6 to 8 mm dia as in stirrups cut to length and bent to shape required including cranking bending spirally for hooping for columns hooking end and binding with mild steel wire ( annealed ) not less than 0.9mm dia or securing with clips complete all as specified and as directed

M&L for preparation of old plastered wall surfaces and applying two coats of cement base paint complete all as specified and as directed.

M&L for preparation of newly plastered wall surfaces and applying two coats of cement base paint complete all as specified and as directed.

M&L for dismantling wrought iron or mild steel work of any description not otherwise provided for boundary wall or fencing complete all as specified and as directed.

Dismantling of fencing, wire mesh etc of any size and description complete all as specified and as directed

M&L for Excavating in post holes (or similar holes) each n. exc 0.5 cum getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n. exc 50m and making good surface in soft/loose soil complete all as specified and as directed

M&L for PCC 1:4:8 type D-2 ( using 40mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and as directed

Demolition of cement concrete in ground floor and paving n. exc. 15 cm thickness (below or above ground level) complete all as specified and as directed.

M&L for providing cement concrete type B-2, 1:2:4 (using 40mm graded crushed stone aggregate) as in foundation, filling and mass concrete complete all as specified and as directed

M&L for mild steel work as in posts or struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc flat iron, equal angles, fillets and the likes (for securing wire mesh etc) including all necessary bolting or riveting and spot welding etc and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed

S&F in repair Galvanised, 2 strand, steel barbed wire 2.24 mm dia, barbed with 2 mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins, etc complete all as specified and as directed (each line of wire to be measured)

S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other to be fitted with washers and one hexagonal or square nuts, n. exc 5cm long , diameter of neck 5 to 10mm complete all as specified and as directed

Supply only chain link fencing mild steel galvanised fencing any size and type (size of mesh and dia of wire as directed by Engr-in-charge) complete all as specified and as directed

Fixing only chain link fencing including line wires, any mesh, size and type to any of standards, rails, straining bolts, etc including provision of binding wire complete all as specified and as directed.

S& F in repair CONSEC ZAL super razor punched barb tape (SRPBT) aluminium base helix coil with and including necessary GI fixing clips for securing concertina coil 1050 mm dia (in stretched position) hot dip galvanized steel wire coated with CLR anti corrosive paint, making complete all as specified and as directed with following specifications :- (i) Dia of coil (unstretched) - 1050 mm (ii) No of circles - 51 turns per coil (iii) Stretched length of each coil - 8 RM (iv) Central core wire - Made from 3.15mm dia GI -HTSS wire as per IS-4454 galvanized as per IS-2629 (v) Razor PUNCHED STRIP - Razor punched strip is CONSEC-ZAL steel comprising of aluminium base with Zinc alloy @ 150 gm/sqm confirming to ASTM A-792/12-792M with additional primer treatment of Epoxy/POLYURETHANE & final print top coat of caulified green shade (BSL 139) by hot dipping process

S&F Mild steel round bars 10mm dia and over as in strengthening bars for chain link fencing conforming to Fe-290 Gde E-165 complete all as specified and as directed.

Dismantling structural steel work including doors, gates framed trusses etc. complete all as specified and as directed.

S&F mild steel framed work such as grills gratings / cattle trap etc with ends of bars shouldered and / or riveted or forged into spiked framed guard bars barred iron doors ladders framed blasters walkways railings framework of water tanks and similar work conforming to Fe 290 Grade E-165 complete all as specified and as directed

M&L for preparation of new steel surfaces of any description over 10cm width or girth, not otherwise described and apply two coat of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed

M&L for preparation of new steel surfaces of any description not exc 10 cm width or girth, not otherwise described and apply two coat of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed

M/S SUMESH FURNITURE

deva engineers

SAROJ CONSTRUCTIONS

M/s Singh Electric Co

Rakesh kumar

HARI BUILDERS

PATIRAM CONSTRUCTION

M/s M S Sharma and Co.