Annual repair and Maintenance of submersible pump set from ward No 7 to 12 in Sargur TP Limit

Annual repair and Maintenance of submersible pump set from ward No 7 to 12 in Sargur TP Limit

Rewinding of submersible pumpset with copper winding wires of appropriate guage, as per specifications and / or directions of the departmental officials, including all materials, labour, equipment and...

For all types of submersible pumpsets above 7.0 HP and upto 7.5H.P

Replace the components of submersible pump sets, requiring replacements decided by the departmental officials, with respective make of damaged ones, including all materials, labour, equipments and tes...

The Intermediate piece (IP) with IP leaded bronze brush.

The Oil Seal.and steel bush

The Impeller (Shell moulded with aluminium and bronze.)

The discharge outlet (DO) bearing DO steel brush DO bearing

The steel bearing bush (DO steel bush)

The allen screw

The pump shaft made out of stainless steel counterless ground with key way (upto 8 stages). Extra for Each stage @ Rs.40/-

The pump key (stainless steel)

The pump coupling (stainless steel)

The Non Return Valve (NRV) assembly complete with rubber O ring

The cable guard

The brass filter

The Labour Charges for overhauling of the pump set

Replace the components of motor parts of submersible pump sets, items requiring replacements decided by the departmental officials, with respective make of damaged ones, including all materials, labou...

The ROTOR motor 4 to 5 H.P

The upper flange

The lower flange

upper/ lower housing

The Carbon Housing

The Carbon Housing (Thrust bearing block assembly complete with segment bearing pad.

The Carbon Housing (Top carbond / ferrodo padding)

The Stud and Nuts

The Gun Metal bearing, centrifugally cast Aluminium Bronze bearing bush

The Motor base with pin

The Transportation of pumping machineries

The Re-errection charges of pumping machineries including overhauling and painting

The lifting of submersible pumpset from well.

The Labour charges only for overhauling

Lifting of struck up submersible pump set. Upto 300 ft PWD 2023-24 CSR WS&UGD Page No.142 Item No.12.26 Volume no 5)

Lifting of struck up submersible pump set. Above 300 ft PWD 2023-24 CSR WS&UGD Page No.142 Item No.12.27 Volume no 5)

Labour charges for Lifting of non functioning submersible pump set along with cable and GI pipes (Each length = 6m) for 50 mm PWD 2023-24 CSR WS&UGD Page No.142 Item No.12.24 Volume no 5)

Rewinding of monoblock motor with copper insulaton wire suitable gauge as per ISI specification with all necessary materials and labour,tools and equipments with guarantee period of not less than 12 m...

Cutting and threading G.I. pipes for pump fitting, public fountains with appurtenances., where the length of pipe laid is less than 6 meters PWD 2023-24 CSR WS&UGD Page No.15 Item No.2.2.2 Volume no 5...

Supplying and fixing single phase preventer using necessary wiresover an existing panel board suitable for motor upto 20 HP capacities. PWD 2023-24 CSR ELE Page No.5 Item No.5.3 Volume no 6)

Wiring for lighting/power circuit using one of FRLS PVC insulated1100V grade, multistrand copper wire with low conductor resistancesingle core in open or concealed system of wiring with specified IS69...