SPECIAL REPAIR TO BLDG NO SM-1 2F OTM ACCN AT PATIALA MIL STN.

Amount

Taking down chowkhats or frames (without taking off shutters from the frame) exc 1.5 Sqm and n. exc 4.00 Sqm incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified.

Taking down chowkhats or frames (without taking off shutters from the frame) n. exc 1.5 Sqm incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified.

S&F Spray Docu painted Pressed steel frames made of MS sheet of 1.20 mm thickness for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, hold fast etc., complete all as specified, size 105 x 60mm and incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified and directed.

S&F Spray Docu painted Pressed steel frames made of MS sheet of 1.20 mm thickness for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, hold fast etc., complete all as specified, size 125 x 60mm and incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified and directed.

Cutting holes in brick walls in cement or cement lime mortar for inserting holdfasts and making good dismantled portion with filling cement concrete 1:2:4 Type B-1 and finishing with 10 mm thick cement mortar 1:3, complete all as specified and directed.

Factory made steel window box type using ERW hollow 'P' section comprising double frame for and including gauged and glazed Skeleton shutter jointed internally with flat iron 40x4mm complete including grill of 8mm square bars, fixed horizontally @ 10cm c/c, hinges, handle, tower bolts, stops, lugs etc. all as shown on drawing No. TD-219(c) sheet 1/3 to 3/3 complete all as specified a Note: (i) For the purpose of measurement & payment double shutter with frame shall be considered as one unit. (ii) Unit rate quoted against this item shall also include the iron mongery and grill as shown on drgs. (iii) Glazing, wire mesh & painting shall be measured & paid for separately.

35 mm thick, 2nd class hard wood (Hollock) plain framed panelled, Factory made shutter (Two panels) with lock rail and panel of 9 mm thick BWP commercial ply with & including beading of Ist class HW on outer face of shutter. The size of rail and stiles as per IS-1003 (Part-I) kiln seasoned and chemically pressure treated all as specified

35mm thick gauzed and Skelton shutters, of 2nd class hard wood factory made, open rebated and prepared to receive gauge etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut or mitred beads for securing galvanized wire clothing etc. Size of members of shutters shall be as specified in SSR Part-I, Section 8, Clause 8.20 (a) with & including beading of Ist class HW on outer face of shutter complete all as specified and directed.

Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification and drawing.

Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, supplying & fixing in the frame at site as per manufacturer’s instructions.

100mm size PVC butt hinges all as specified

125mm size PVC handles all as specified and directed

200mm long PVC tower bolt all as specified and directed.

Mild steel barrel tower bolt 200mm long stove enamelled black with bright bolt and fixed complete all as specified and directed.

Mild steel sliding door bolt of size 250mm bolt type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed.

Floor door stopper 150mm long of aluminium alloy body and tongue anodized with hard drawn steel spring fixed in floor all as directed and specified

M & L for MS pressed handles of size 125mm oval type stove enamelled black complete all as specified and directed by Engr-in-Charge.

Mild steel helical door spring of size 300mm including roller and roller plate fixing to iron frame by welding all as directed.

S & F Sheet glass ordinary quality 4 mm thick and glazing with oil putty or fixed with wooden beads in squares not exceeding 0.5 sqm in each pane complete all as specified & as directed.

All as per serial item No 19 here-in-before but 4mm thick frosted glass complete all as specified and directed.

Galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples.

Decorative mild steel curtain rods 25mm dia( powder coated) including fixing brackets & side cups complete fixed in repairs i.e., including taking down the existing unserviceable curtain rods complete all as specified and directed

Preparation of new wood or wood based surfaces and applying two coats of synthetic enamel paint over one coat of pink primer on surfaces exc 10 cm in width or girth, complete all as specified and directed.

Preparation of new steel surfaces of any desctiption over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed..

Dismantling of brick work built in cement mortar incl all quoins, arches, pillar etc, complete all as specified and directed.

Brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6, complete all as specified and directed.

Taking down cement plaster on brick Walls built in cement mortar including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed.

10mm thick cement plastering in cement mortar 1:6 on fair faces of brick work or concrete surfaces finished even & smooth without using extra cement complete all as specified and directed.

Rendering 15mm thick cement plaster in cement mortar 1:4 (mixed with integral liquid water proofing compound of approved make as per manufacturer's instructions) on fair faces of brick work or concrete external surfaces finished even & smooth without using extra cement complete all as specified and directed. Note: - Integral liquid water proofing compound shall be measured and paid for separately against respective item.

Rendering 5mm thick cement plastering in cement mortar 1:3 as on ceiling, chhajjas & other concrete surfaces finished even and smooth without using extra cement, complete all as specified and directed.

Preparation of new plastered or unplastered surfaces of walls and applying two coats of oil distemper over a coat of chalk whiting priming paint complete all as specified and directed

Preparation of old plastered or unplastered surfaces of walls and applying two coats of cement base paint over a coat of alkali resistant cement priming paint complete all as specified and directed

Preparation of new plastered or unplastered surfaces of walls and applying three coats of white wash complete all as specified and directed

All as per serial item no 33 but three coats of white wash on ceiling surfaces.

Preparing old surfaces on ceiling and applying one coat of lime white wash on ceiling complete all as specified and as directed.

Preparing old surfaces on walls by washing ,rubbing down and stopping of distempered or painted surfeces and applying two coats of oil distemper on walls complete all as specified and as directed.

Demolition of cement concrete (un-reinforced) in floors and pavings n. exc 15 cm thickness (below or above ground level).

Non skid ceramic joint free (with rectified edges), Non Skid/ Matt superior finish grade B-II (a), floor tiles 7-8mm thick and area exceeding 0.11 sqm but not exceeding 0.18 sqm, coloured as in flooring etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tile including 15mm thick screed layer in CM 1:4 over and including 25mm thick PCC 1:2:4 type B-1 using 20mm graded stone aggregate finished fair and even complete all as specified and directed.

Coloured glazed ceramic joint free (with rectified edges) glazed economy finish grade B-II (b), tiles of size 600mm x 300mm x 7mm thick ( or any larger size as directed by Engineer incharge) , as in dado / skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tile, laid over and including 10mm thick bedding layers in cement mortar 1:4 complete including taking down existing tiling/cement plaster/ any other type of Skirting / Dado & preparation of surface to receive fresh screed layer complete all as specified and directed

Machine cut mirror polished, kota stone slab (nearest to 58cmx58cm in size), 18mm (+ 2mm) thick as in flooring laid over and including 20 mm thick screed bed or bedding layer in cement mortar 1:4 as base and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing to mirror finish complete all as specified and directed.

50mm thick PCC (1:3:6) type C2 (using 40mm grade aggregate) as in plinth protection, finishing the surfaces even & smooth w/o using extra cement, complete all as specified and directed.

Cement concrete 1:2:4 type B-0 (12.5mm graded agg) as in lintels upto 1.50m clear span, cills , steps, copings , bed blocks, band, shelves/ chajjas, manhole covers etc with slightly rounded or chamferred angles or edges ( precast or casted in situ) as directed by Engineer in charge incl use and waste of form work for rough finished surfaces of concrete complete all as specified and directed.

Mild steel TMT bars 8 mm dia and over as in reinforcement, cut to length, bent to shape required, incl cranking bending spirally for hooping for columns and binding with MS wire (annealed) not less than 0.9 mm dia or securing with clips.

Taking up or down steel tubing 15 mm bore or connection, incl cleaning pipe for checking its serviceability for re-fixing or otherwise for removal from site or to store complete all as directed by Engineer incharge.

Steel water tubing medium grade 15mm bore galvanised with all fittings and fixed to walls and ceiling or laid in floors complete all as specified and directed.

Taking up or down steel tubing 20 mm bore or connection, incl cleaning pipe for checking its serviceability for re-fixing or otherwise for removal from site or to store complete all as directed by Engineer incharge.

Steel water tubing medium grade 20mm bore galvanised with all fittings and fixed to walls and ceiling or laid in floors complete all as specified and directed.

Bib tap cast copper alloy chromium plated, fancy type, with capstain head handle screwed down screwed for iron pipe and fixed fo 15mm bore pipe fixed as in repairs, complete all as specified and directed.

Stop valve, cast copper alloy, screwed down, high pressure, with cutch or butterfly handle, screwed both ends for iron pipes or for union and fixed for 20mm bore as in repair, complete all as specified and directed.

Stop cock fancy type, brass chromium plated with long shank and cup (concealed type) 15 mm bore fixed in repair, complete all as specified and directed.

Angle stop cock fancy type, brass chromium plated with CP cup 15 mm bore fixed in repair, complete all as specified and directed.

Rotational moulded polythene water storage tanks of capacity 500 lit, hoisted and fixed in position including 20mm bore brass ball valve high pressure with polythene float and fly nut incl 32mm dia wash out with plug complete including dismantling of old PVC water tank of capacity 300 / 500 Lit, complete all as specified and directed.

450 mm long PVC connection with brass check nuts for 15mm bore pipes of aproved quality, complete all as specified and directed.

PVC valveless syphonic action type Flushing cistern low level, 10litres capacity, with inlet ball valve and all standard accessories including 32mm dia PVC flush pipe fixed in repair including connections and making good the disturbed surfaces in CM 1:3 complete all as specified and directed.

Vitreous china wash hand basin off white flat back size 550 x 400mm, including 32mm CP brass waste fitting, 32mm PVC waste pipe, cast iron brackets and PCC 1:2:4 type B-I using graded stone aggregate for embedding brackets and making good disturbed surfaces in CM 1:3 complete fixed as in repair, all as specified and directed.

Brass chromium plated shower roses 125mm size with swivel joint including CP arm and wall cap, suitable for 15mm bore concealed pipe complete fixed as in repairs, complete all as directed and specified.

Viterous china squatting pan, 'Orissa' pattern, size 580 x 440mm white, with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and flushing pipe anti syphonage pipe etc fixed as in repair complete all as specified and directed.

Cast iron soil waste and vent pipe of bore 100mm centrifugally cast, ISI marked, in any length with or without ears with run lead joints laid in trenches or in floors fixed in repairs complete all as specified and directed.

All as per serial item no 59 but of bore 75mm, complete all as specified and directed.

Cast iron floor trap with 75mm dia of out let with stainless steel grating incl jointing to waste pipe in run lead, complete all as specified and directed.

Cast iron branch pieces single, (equal or unequal) ordinary or inverted (spigot or socket type) with parallel branches, suitable for 100mm bore pipe, as in repairs, jointed in run lead all as specified and directed.

CI cowl of 75mm dia, complete all as specified and directed.

Salt-glazed stoneware gully traps 150 x 150mm, round mouthed 'P' type with CI grating, setting and jointing to drain in cement mortar 1:1, including cement concrete 1:2:4 type B-1 in bed, surrounds and kerbs, fixed as in repair including making good to disturbed plinth protection with matching to surrounding complete all as specified and directed.

Dismantling of brick tiles or terracing tiles single layers on roofs complete all as specified

Demolition of mud phuska, in roof any thickness including leeping plastering, complete all as specified and directed.

Roughening surfaces of old concrete floor/ roof surfaces by picking, wire brushes or by any other means, sweeping clean and washing down with water to remove dust, etc, complete all as specified and directed.

PCC 1:3:6, type C-0 using 12.5mm graded stone aggregates as in base for OH Tanks, padding over roof incl finishing the surface even and smooth with steel trovel incl all necessary use and waste of form work complete all as specified and directed.

Applying one coat of bituminous primer @ 0.4 Kg per sqm complete all as specified and directed.

Providing and laying 3mm (-0.2/+0.3) thick APP with mineral finish (Atactic Polyproplene Polymer) modified prefabricated five layer, weight not less than 3.6 Kg/sq.m water proofing membrane mineral finished, reinforced with non-woven polyster matt make as approved including of a coat of bitumen primer @ 0.40 ltr/sq.m by the same membrane manufacturer of density 0.87 to 0.89 Kg/Ltr at 25 degree C temperature and viscosity 70 - 160 cps over the coat, 4mm th 5 layered APP membrane mineral finish shall be laid using butane torch and sealling all joints etc after the surface complete as per standard practice as per manufacturers instructions. The vital physical and chemical parameters of the membrane shall be as under - (i) Tensile strength in longitueinal and transverse direction as 600±150/400±150 N/5cms (ii) Tear strength in longitudinal and transverse direction as 300 / 200 N/. Softening point of membrane not less than 145 degree (iii) Penetration @25 C d 15-25mm (iv) Water Tightness 10 kPa (v) The laying of membrane shall be got done through the authorised applicator of manufacturer of membrane only all as specified and directed.

40mm thick brick tiles laid on 15mm thick cement mortar 1:6 and joints grouted flush in CM 1:3 mixed with 5% of crude oil by weight of cement and pointed flush in CM 1:3as a separate operation complete all as specified and as directed.

Supply only liquid water prooing compound

M & L 75 mm thick Cement concrete 1:4:8 type D-2 using 40mm graded crushed stone aggregate as in sub base under floors etc complete all as specified and as directed.

M &L for Rubber moulded Machine pressed precast concrete interlocking paver block(available in different colour for making patterns) any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade with gray cement and pigment laid over 25mm thick sand cushioning complete all as specified and directed.

Taking down carefully copper/aluminum point wiring (light, fan, socket or power) complete with fittings and fixtures such as switches, ceiling roses, pendants, regulators, socket, lamp holders brackets, bulk head fittings etc removing material for taking credit ( credit shall be recovered as per credit Sch attached) and also making good disturbed surfaces of wall, floors etc all as specified and as directed by the Engineer-in-Charge.

M&L for point wiring with 1.50 sqmm in copper conductor cable ( multistrand) FRLS single core PVC insulated cable in and including PVC concealed conduit ( ISI Marked) of heavy duly with all accessories ie PVC gutties etc terminated in sunken/pressed metal flush box and white modular cover plate with frame for mounting of switches /sockets/ fan regulators etc and continuous earth wire 1.5 Sqmm copper cable PVC insulated FRLS controlled by one switch for one light/fan/sockets point/ all as specified and directed by Engr-in-Charge in ceiling Portion surface conduit wiring to be done. Note : i) Eye/bottle thimbles shall be used for connection in switches/sockets & MCB's in DB's without any extra cost ii) Electric rewiring should be done in proper colour coding i.e. Red for phase, Black for neutral and Green for Earth.iii) Neccessary cutting chasing wherever required shall be part of job at no extra cost.

All as per item No 76 above, but for one 3/5 pin socket outlet 5 Amp on the same board with other switches complete all as specified and as directed by the Engineer-in-Charge.

All as per item No 76 above, but for one 3/5 pin socket outlet 5 Amp on independent board complete all as specified and as directed by the Engineer-in-Charge.

All as per serial item No 76 here-in-before , but for one socket outlet 15 Amps on independent board with 2.5 Sqmm copper conductor ( Multi-stranded) PVC insulated and unsheating electric cable 1100 volts (ISI Marked) including PVC insulated and unsheathed electric cable 1100 volts 1.5 Sqmm copper stranded conductor as continuous earth wire connected to common earth dolly complete all as specified and as directed by Engineer-in-Charge.

M&L for Modular Socket 6A/16A - 2/3 pin 2 module type complete all as specified and directed.

M&L for Modular Socket, 6A - 5 pin 2 module type complete all as specified and directed.

M&L for Modular switch 1 way 6A, 1 module, complete all as specified and directed.

M&L for Modular switch 1 way 16A, 1module type, complete all as specified and directed.

M & L for Fan step regulator, 120W - 1 module, complete all as specified and directed.

Material and labour for ceiling rose surface type, 65 mm x 50 mm two to three terminals / PVC / polycarbonate, isolated body fixed on PVC block complete all specified and as directed by the Engineer-in-Charge.

Supply and fixing for sub main wiring two single core PVC insulated and unsheathed cable with 6 Sqmm multi -strand copper conductor drawing in PVC concealed conduit with 4 Sqmm PVC copper conductor cable as in earth wire system ,including taking out old wiring complete all as directed. Note: Neccessary cutting chasing wherever required and making good the disturbed surface shall be part of job at no extra cost.

Supply & fix in replacement of existing unserviceable Sheet metal enclosure with new DB’s suitable for MCBs of single pole and neutral 8 way double door type with 200 amp rated bus bar. Note: i) Connnections of the MCB'S shall be done with appropriate size of brass/Cooper thimble. ii) The DB shall be fiush fixed and making good the disturbed surface shall be part of job at no extra cost.

Supply and fix in replacement of MCB SP up to 6-32 Amp, complete all as specified and directed.

Supply and fix in replacement of MCB SPN 6-32 Amp complete all as specified and directed.

Supply & fix in replacement of existing unserviceable FTL with new techonlgy self blasted LED retrofit tube lamp with thermoplastic body with high lumen 18 w 6500 K suited for installation in existing t5 tubelight including neccessary electric conection with box type batten, complete all as specified and directed.

Material and labour for angular type lamp holder, PVC/ polycarbonate type with back plate suitable for 7 to 18 watts for batten fitting, complete all as specified.

Supply and fix LED Lamp 9W B22 , complete all as specified and directed.

M&L for earthing complete with galvanized steel earth plate electrode 600x600x6mm tthick buried directly in ground(earth plate not less than 2.25 mtr deep below the normal ground level ) with top edge of plate not less than 1.5 mtr below the normal ground level connected to galvanized earth wire 4mm dia by means of nuts bolts,washers,check nuts of iron or steel including test point PCC pits and RCC cover in PCC 1:2:4 (type B-1) including iron angle frme 40*40*6mm. and medium grade GI watering pipe 20mm dia with funnel and wire mesh and 15 mm bore GI pipe light grade proection pipe including excavation and charcoal ,common salt surrounded with 15cm all around the plate all as specified and shown in EP-3 of SSR Part-I

S&F in replacement of existing unserviceable LED building light IP 66 powder coated pressure die cast aluminium compact high power LED fitting 25 watts with heat resistant toughned glass complete with all accessoreis watts complete including GI pipe bracket made out 40 mm dia GI pipe medium grade of 1.20 mtr long and make to shape fixing with 40x6mm size of flat iron clamp, nuts , bolts and washers connection including two coat of aluminium paint over a coat of primer and fixing the fitting on bracket and all the electrical connection, complete all as specified and directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm 2 core, complete all as specified and directed.

Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth for laying of cables including getting out in any kind of soil complete all as specified and directed.

Returning filling in including spreading, levelling, and well ramming, in layers not exceeding 25 cm each layer of any kind of soil, complete all as specified and directed.

Removing surplus excavated material from site not exceeding 50 mtrs from starting point and depositing where directed at level not exceeding 1.5 mtr above the starting point, complete all as specified and directed.

Sand cushioning for cables 8 cm below the cable and 15 cm above the cable all as specified and directed, complete all as specified and directed.

Material and labour for old size brick well burnt, laid flat, for cable protection complete all as specified and directed.

Material and labour for replacement of GI tubing light grade 32 mm bore for passing through cables under the floor ,along the wall or along the pole complete all as specified and directed.

FAVOURITE ENGINEERS

M/S RAJ KUMAR GUPTA

m/s panchmukhi builders

Arneja Builders

Buttar Construction Co.