CONSTRUCTION OF OPERATION ROOM FOR VISITING SQNS AT AF STN BKT

Amount

Surface excavation n exc. 30cm deep and averaging 15cm deep and getting out in soft/loose soil complete including disposal of rubbish beyond 50m complete all as specified and directed .

Excavation in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m depth for foundation, laying cables, pipes, etc., and getting out in soft/ loose soil complete all as specified and directed .

M&L for plain cement concrete Type D2 1:4:8 (using 40 mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and directed .

M&L for brick work with fly ash bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 complete all as specified and directed .

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick with excavated soil complete all as specified and directed .

Removing Excavated soils not exc 50 m and depositing where directed at a level not exc1.5 m above the starting point complete all as specified and directed .

M&L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter (rough finished flat surfaces) complete all as specified and directed .

M&L for rough finished flat formwork to sides of pillars, posts, struts, piers, columns and stanchions (rough finished flat surfaces) complete all as specified and directed .

M&L for fair finished flat form work to sides and soffits of floor or roof beams, lintels, cantilevers, shelves including supports etc (fair finished flat surfaces) complete all as specified and directed .

M&L for fair finished flat form work to soffits or suspended floors such as roof slab not exc 200 mm thick horizontal or sloping (fair finished flat surfaces) complete all as specified and directed .

M&L for rough finished flat formwork to fins, louvers, fascia (rough finished flat surfaces) complete all as specified and directed .

M&L for Mild steel TMTbars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing complete all as specified and directed .

M&L for Mild steel TMTbars but 6mm to 8mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing complete all as specified and directed .

Mild steel TMT bars 5 mm to 8 mm dia., cut to length, bent to shape required, in stirrups, spacers and binders and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and directed .

M&L for reinforced Cement Concrete M-25 (using 20 mm graded stone aggregate) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed .

M&L for reinforced Cement Concrete M-25 (using 20 mm graded stone aggregate)as in slabs supported on walls,beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelves and the like complete all as specified and directed .

M&L for reinforced Cement Concrete M-25 (using 20 mm graded stone aggregate) as in chajja complete all as specified and directed .

M&L for reinforced Cement Concrete M-25 (using 20 mm graded stone aggregate) as in Columns, pillars, piers, posts and struts complete all as specified and directed .

Spreading and levelling in layers of soil/earth not exceeding 25 cm thick and well ramming including watering as required complete all as specified and directed .

M & L for hardcore of gauge not exceeding 63 mm of broken stone, deposited, spread and levelled layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and directed .

M&L for 100 mm thick plain cement concrete type D 2, 1:4:8 (using 40 mm graded stone aggregate) in sub base of flooring/ hard standing complete all as specified and directed

M&L rendering 15mm thick in cement mortar (1:4) on brick walls or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed .

M&L 15mm thick rendering in cement mortar (1:6) on brick wall or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed .

M&L 5mm thick rendering in cement mortar (1:3) on fair faces of brick work or concrete surfaces as in ceiling/facia/ chajja with using WPC Compound complete all as specified.(WPC shall be measured and paid separately)

Supply only Integral waterproofing compound

M&L Kota stone slab 18 to 22mm thick in floor laid over and including 20mm thick screed bed in CM (1:6) & jointed in grey cement slurry mixed with pigment to match the shade of slab including rubbing & polishing complete all as specified and directed .

M&L for makrana white marble 20mm thick used as in platform and window cills and strips in kota stone flooring size as required at site laid over and including 20mm thick screed bed in CM (1:6) & jointed in grey cement slurry mixed with pigment to match the shade of slab including rubbing & polishing complete all as specified and directed .

M&L kota stone slab 18-22mm thick in skirting or in vertical surface over and including 10mm thick rendering in CM (1:6) & joint in grey cement with pigment to match the shade of slab including rubbing & polishing complete all as specified and directed .

M&L for preparation of new plastered surfaces of walls and applying two coats of antifungal weather proof paint over a coat of alkali resistant priming paint in camouflage pattern of three or more colors as approved by GE complete all as specified and directed .

M&L for preparation of newly plastered surfaces of walls and applying two coats of distemper oil emulsion over one coat of primer including a thin layer of birla wall care putty not less than 1mm thick complete all as specified and directed .

M&L for preparation of newly plastered surfaces of ceiling and applying two coats of distemper over one coat of primer including a thin layer of birla wall care putty not less than 1mm thick complete all as specified and directed .

M&L for water proofing treatment by providing 90-100 micron thick polymeric water proofing membrane over levelling coarse on oof complete all as mentioned below and as specified : 1. Average 10mm thick plaster in CM 1:3 mixed with polymer based water proofing compound when levelling coarse is still green. 2. After the surface is fully dried, it shall be cleared free from dust and shall be painted with a coat of bituminous primer @ 0.30 litres/Sqm. 3. After primer, the entire roof surface shall be applied with hot blown bitumen grade 85/25 confirming to IS-702 @ 1.2 Kg/Sqm 4. Over hot bitumen, polymeric water proofing membrane consisting of 90 to 100 micron thick central core of HMHDPE film and standard weight not less than 3 Kg/Sqm shall be laid with 100mm side lap/end lap on prepared surfaces as per manufacture’s instruction and strict supervision of manufacturer’s technical representative including as required on vertical surface in parapet. 5. Laying cement concrete tiles of size 25cm x 25cm x 22mm thick over a bedding layer of 20mmthick cement screed in CM 1:4. The cement mortar screed shall be mixed with polymer based liquied water proofing additive @ 5% by weight of cement as per manufacturer's specification/instructions and tiles joints shall be filled with 1:3 cement mortar mixed with crude oil as per SSR 2009 (part-I).

S&F factory made uPVG white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+/ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2mm (+/- 0.2mm) thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories area not exceeding 2.00 sqm each complete as specified and directed. Note: (i) The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. (ii) Net Opening will be measured for payment purpose.

Supply and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension (extruded section profile) 42 x 50 mm (tolerance + 1mm) with wall thickness 2.00mm ( + 0.2mm), corners of the door frame jointed with galvanized brackets and stainless steel screws, joints mitred and plastic welded. The hinge side vertical the frames re-inforced by galvanised MS tube size 19 x19 mm and 1 mm ( + 0.10mm ) wall thickness and 3 Nos. Stainless steel hinges fixed to the frame complete all as specified and directed by the manufacturer and as per directions of Engr-in-charge.

S&F sheet glass 6mm thick toughened glass fixed in UPVC window including all fittings and fixture complete all as specified and directed .

M&L for 75 mm thick PCC 1:3:6 type C-2(using 40 mm graded stone aggregate) as in plinth protection finished even and smooth without using extra cement complete all as specified and directed .

M&L for 100 mm thick Cement concrete type B1, 1:2:4 (using 20 mm graded stone aggregate) in hard standing finishing the surface even & smooth without extra using cement complete all as specified and directed .

M&L forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound grade 'A' complete all as specified.

M&L for Anti-termite treatment to the bottom and sides of excavation at the rate of 5 litres of emulsion per square metre of surface area complete all as specified.

M&L for Anti-termitetreatment to the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as specified.

M&L for Anti-termite treatment to the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and directed .

M&L for Anti-termite treatment to the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall complete all as specified and directed .

S&F 15 mm bore GI tubing medium grade, galvanised with all fitting and fixed complete to walls and ceilings or laid in floors all as specified and directed.

S&F 20 mm bore GI tubing medium grade, galvanised with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed .

Supply and fix Vitreous china wash down water closet pan (pedestal pattern), white including P or S strap, Plastic water closet seat, white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device suitable for EWC (except flushing cistern and flush pipe) complete all as specified and directed

S&F PVC valveless, syphonic action low level flushing cistern of 10 Litres with all internal fittings brackets incl flush pipe and fixing to supply pipe complete all as specified and directed .

S&F Vitreous china wash hand basin white flat back of size 550 x 400mm excluding tap but including brackets/waste coupling complete all as specified and directed .

S&F 15 mm stopcock cast copper alloy, screwed down high pressure chromium plated screwed both ends for iron pipe or for unions and fixed complete all as specified and directed

S&F 15 mm bib taps cast copper alloy, screwed down high pressure chromium plated screwed for iron pipe and fixed complete all as specified and directed .

S&F 15 mm pillar taps cast copper alloy, with capstan head .chromium plated screw down high pressure, with or without lettered HOT or Cold with long shanks and fly-nuts screwed for iron pipes and fixed complete as in repair incl necessary small GI fittings complete all as specified and directed .

S&F PVC connections 15mm size with PTMT nuts of length 450mm long complete all as specified and directed .

S&F for stop valve cast copper alloy,with long shank and cup concealed type, fancy type, chromium plated, high pressure with cruth or butter fly handle, screwed both ends for iron pipe and fixed for 15mm bore complete as specified and directed.

Suply and fix stainless steel sink with drainage board made out of 1.00 mm thick sheet for kitchen with plug washers, waste pipe including bedding in cement mortar on dwarf wall or including cast iron cantiliver brackets connecting union overall size 915 X 460 mm with bowl size 405x355x178mm or 410x357x178mm complete all as specified and directed and as directed

M&L for coloured Vitrified Ceramic tiles 10 mm thick (square/ rectangular) light shade polished, area of each tiles not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match laid over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed

M&L for coloured Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm in wall skirting etc. set and jointed in neat cement slurry and pointed in coloured cement to match laid over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed .

M&L for Non Skid ceramic coloured tiles 7mm to 8mm thick, (square or rectangular) area of each tile exc 0.11 Sqm but n. exc 0.18 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and includingl 15mm thick screed bed in CM 1:6 complete all as specified and directed .

M&L for Glazed ceramic tiles coloured (450x300mm) x 7mm thick, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick backing coat of tiles in CM (1:4) complete all as specified and directed .

Supply and fix in repair Rotational moulded three layered polyethylene water storage tanks (multi layer) 500 Ltrs capacity (Cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed

Supply and fix Soap dish, vitreous China white, of size 160x 160x90mm complete all as specified and directed

Supply and fix 100mm cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed

Supply and fix 100mm cast iron Nahani trap, with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and directed

Supply and fix PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed and as directed.

Supply and fix 75mm cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors complete all as specified and directed and as directed.

Supply and fix 100mm bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and directed and as directed.

Supply and fix swivel shower of PTMT any colour for fixing with 15mm pipe. (Minimum weight 40gms) complete all as specified and directed and as directed.

Supply and fix in repair Brass chromium plated Tubular Towel Rail , 20mm dia, D type, 600mm long between flange fixed with chromium plated brass screws complete all as specified and directed .

M & L for machine pressed precast interlocking paver blocks PU coated (rubber moulding) any shape and size conforming to IS 15658-2006 of 80mm thickness , M-40 Grade, with grey cement and pigment complete all as specified and directed .

M&L for sand filling under floors / in trenches for protection of LT under ground cable or in foundations including watering and consolidation complete all as specified and directed . Note:- Punned thickness shall be measured only)

M&L providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete.

Supply and fix 19 mm dia harrison curtain rails mild steel complete all as specified and directed .

Supply and fix fancy type curtain rod bracket complete all as specified and directed .

M&L for Reinforcement Concrete pipes class type NP3 laid and jointed complete with collars of 150mm bore dia complete all as specified and directed .

Material & Labour for cement concrete 1:4:8 type D2 (using 40mm graded stone aggregate) as bed to drain pipes incl packing under and haunching against the sides of pipes after they are laid and tested for bore of pipe 150mm complete all as specified and directed .

Material & Labour for cement concrete 1:2:4 type B2 (using 40mm graded stone aggregate) as in surface channels and drains etc complete all as specified and directed .

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement including forms/ moulds mitred/stopped ends etc complete all as specified and directed .

M&L for construction of Hume Pipe septic tank designed to carry sewage and sullage water for 10 users including necessary earth work excavation in any type of soil, PCC 1:4:8 in foundation, Vent shaft, connection etc., all as per drawing complete all as specified and directed .

M&L for soakage wells of size 1.8 m dia and 3 m effective depth including excavation in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM 1:4, RCC cover slab in M25 / SFRC cover, interconnecting pipes of RCC/DWC complete as per drawing filled with brick bats of size complete all as specified and directed

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sq mm 4 core

Supply and laying well burnt sub class ‘B’ bricks, locally best available laid in trenches for protection of underground cable complete all as specified and directed .

Supply & laying GI Tube medium grade with all fitting (union, elbow, socket) , flanges,nut & bolts laid in trenches of size 25 mm complete all as specified and directed

Supply & laying GI Tube medium grade with all fitting (union, elbow, socket) , flanges,nut & bolts laid in Floor or wall or ceiling of size 25 mm complete all as specified and directed

M & L for Cutting existing steel 50 mm/25mm GI tubing and screwing for alterations or additions for branch connections of the dia 25 mm including necessary fitting like Tee, nipple etc. complete all as specified and directed

S & F Gun-metal, gate valve of size 25 mm metal globe or gate vaive, with iron wheel head, screwed both ends for GI pipe complete all as specified and directed

Construction of brick masonry Valve chamber of internal dimension 60 cm x 60 cm x 60 cm with PCC (1:3:6) type C2 in foundation and wall with subclass 'B' brick in CM (1:6) including 15 mm thick plastering in CM (1:4) to internal and external portion of exposed area above ground level, including 3 mm thichk MS sheet cover welded around with MS flat iron of size 40 x 6 mm including MS angle iron frame of size 40 x 40 x 6 mm with locking arrangement including painting with two coats of synthetic enamel paint over a coat of red oxide primer including necessary earth work in soft/loose soil, well ramming of soil around the constructed chamber complete all as specified and directed

M&L for Point wiring for one light point controlled by one way 5 Amp 240V switch complete with two single core FRLS PVC insulated unsheathed , 1100 V grade conforming to IS 694 ,1.5 Sqmm (Norminal area) multistranded ,copper conductor cable drawn through in non metallic rigid PVC conduit medium grade , 2 mm thick , minimum 20 mm dia, ISI Marked, and connect accessories, mounting on suface of walls / ceilings /roofs etc in MS sunken box flush in wall of 1.6 mm thick with laminated sheet of suitable size 3 mm thick for mountinf switch,sockets etc including provision of FRLS PVC insulated unsheathed 1.5 Sqmm muiltistranded copper conductor cable as earth connectivity and connecting to common earth dolly complete all as specified and directed .

All as per item No 88 above but one ceiling/exhaust fan point controlled by one way switch SP 5 Amps, 240 V.

All as per item No 88 above but one switch socket outlet 3 Pin, 5 Amps, SP on independent board.

All as per item No 88 above but one switch socket outlet 3 Pin, 5 Amps, SP on same board.

M&L for point wiring complete with multi-stranded copper conductor 2.5 sqmm size 1100 Volt grade FRLS PVC insulated sheathed cable , conforming IS 694 & colour code in conduit system of wiring, drawn in and including medium grade non mettalic PVC conduit not less than 20 mm dia concealed, including cutting chases and making good disturbed surface complete, sunk in pressed steel terminal boxes of required size of not less than 1.6 mm thick factory made and factory painted with top cover 3mm thick plastic laminated sheet fixed with brass screw and washer with all accessories including single core multistrand conductor copper 2.5 sqmm size solid PVC insulated unsheathed cable as earth wire to common earth and connected to earth dolly drawn in same conduit complete all as specified and directed .

S&F switch piano flush type single pole one way 240V , 5 Amps grade complete all as specified and directed .

S&F socket outlet 2 in 1, 3 pin, 5 Amps flush type complete all as specified and directed .

S&F switch piano flush type single pole one way 240V , 15 Amps grade complete all as specified and directed .

S&F Socket outlet 2 in 1, 3 pin, 5 and 15 amp flush type complete all as specified and directed .

Supply and fixing LED light fitting 1x 20W, 4 feet,220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceilingrose complete. Make:- Crompton/Philips/Bajaj/Havells

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed . Make:- Philips/Bajaj/Havells/Crompton

S&F lamp holder, PVC/polycarbonated type with back plate suitable for batten fitting including 9 W LED lamp -01 Nos complete all as specified and directed .

Supply and fix ceiling fan complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed . Make:- Havells/Bajaj/Usha

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers complete all as specified and directed . Make:- Havells/Baja/Usha

M & L for submain wiring with 1100volt grade PVC insulated unsheathed multistranded 02 run of 06 sqmm copper conductor cable confirming to IS 694 FRLS drawn through and including rigid PVC conduit 25 mm dia in Ivory/Grey colour medium grade etc fixed on concealed including provision of 01 run of 6.0 sqmm PVC unsheathed multistranded copper conductor and connected to earth dolly complete all as specified and directed Note :- 02 run of 06 sqmm and 01 run of 6.0 sqm including 01 run of PVC conduit will be measured as one length

M & L for submain wiring with 1100volt grade PVC insulated unsheathed multistranded 02 run of 04 sqmm copper conductor cable confirming to IS 694 FRLS drawn through and including rigid PVC conduit 25 mm dia in Ivory/Grey colour medium grade etc fixed on concealed including provision of 01 run of 4.0 sqmm PVC unsheathed copper conductor multistranded and connected to earth dolly complete all as specified and directed Note :- 02 run of 04 sqmm and 01 run of 4.0 sqm including 01 run of Pvc conduit will be measured as one length complete all as specified and directed .

S&F flush mounting factory made TPN DBs Double door IP-43 protection, with Metal door with neutral bar,Earth Bar and cables ties for cable menagement fully insulated bus bar 4 way, complete all as specified and directed .

S&F flush mounting factory made SPN DBs Double door IP-43 protection, with Metal door with neutral bar,Earth Bar and cables ties for cable menagement fully insulated bus bar 4 way, all as specified and directed.

Supply and fixing 415V 10KA 'C' curve miniature circuit breaker (MCB) of 63 Amp 4 poles and current carrying capacity in the DB complete with connection testing and commissioning.

Supply and fix DP MCB, 240 volts, 40 amps complete all as specified and directed .

Supply and fix MCB single pole 240 volts, 6 to 32 amps, 50HZ, 10 KA. , ‘B’ series complete all as specified and directed .

Supply and fixing of single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 25 Amp complete all as specified and directed .

M&L for earthing complete with galvanized steel earth plate 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25 Mtr deep below normal ground level) with top edge of plate not less than 1.5 Mtr below normal ground level connected to earth lead wire of GI wire 4mm dia by means of nuts/bolts and washers, check nuts and washer of galvanized iron or steel including 15 mm dia GI pipe mediumt grade upto 1.5 mtr below ground level for protection pipe ,excavation and earth work charcole dust, common salt PCC 1:3:6 type C-I using 20 mm stone aggregate for chamber and MS angle iron frame 40x40x3mm and RCC cover 40 mm thick (1:2:4) type BI using 20 mm graded stone aggregate reinforced with 8 mm dia TMT bars @ 75 mm c/c both ways with MS handle 12 mm dia, round ,PGI funnel and wire mesh, 20 mm dia GI pipe light grade for watering all as shown in Plate no 3 of SSR Part I of 2009 and connected to earth test point incl testing complete all as specified and directed . Note :- Cost of earthing strip & GI pipe 15 mm up to 7.5 m shall be included in cost of above item.

S & F ceiling rose 65 x 50mm three terminals complete all as specified and directed .

M/s A S Associates

BAJAJ CONSTRUCTION