REPLACEMENT/ MAINTENANCE TO INTERNAL WIRING WITH FITTINGS, DBs INCLUDING MCBs AND RENEWAL OF UNSERVICEABLE CONVENTIONAL LIGHTS WITH LED LIGHTS AT SAILORS, DSC MD/ ETC AND REPAIRS TO FLOORS, ROOF, WALLS ETC FOR TEMP BUILDINGS AT ARAKKONAM

Amount

Taking down copper /aluminium point wiring (light, fan, socket or power) complete, including fixtures and fittings such as switches, ceiling roses, pendents, regulators, sockets, light fittings etc., removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of wall, floors, etc., complete all as specified and as directed by Engr-in-charge.

Material and labour for point wiring with 1.5 sqmm single core PVC insulated FRLS unsheathed multi stranded copper conductor wire drawn into existing concealed conduit including provision of 1.5 sqmm single core PVC insulated FRLS unsheathed multi stranded copper conductor as earth wire and cast iron/ pressed steel terminal boxes for mounting switches, sockets, fan regulator etc., with 3mm thick plastic laminated sheet cover complete for the following point wiring complete all as specified and as directed by Engr-in-charge. Make of cable: Plaza /Polycab /Finolex

One light point controlled by one switch

One fan point controlled by one switch

One Exhaust fan point controlled by one switch

One 3 pin socket outlet 5 Amps, same board with cables 1.5 sqmm size

One 3 pin socket outlet 5 Amps, independent board with cables 1.5 Sqmm size

One bell/ buzzer point controlled by one push button with other switches on independent board with cable 1.5 sqmm size

One light point controlled by two 2- way switches, with cable 1.5 Sqmm size

All as per item No.02 here-in-before but one 3 pin socket outlet 5/ 15 Amps, independent board with cables 4 sqmm size. Make: Polycab /Finolex/ Plaza

Material and labour for point wiring with 1.5 sqmm single core PVC insulated FRLS unsheathed multi stranded copper conductor drawn into including PVC concealed (fixed on wall /roof/ ceiling etc.,) conduit of size not less than 20mm dia and including provision of 1.5 sqmm single core PVC insulated FRLS unsheathed multi stranded copper conductor as earth wire and cast iron/ pressed steel terminal boxes for mounting switches, sockets, fan regulator etc., with 3mm thick plastic laminated sheet cover complete for the following complete all as specified and as directed by Engr-in-charge. Make for PVC conduit: SUDHAKAR/ AVON PLAST/ FINOLEX Make for Copper cable: Finolex /Polycab/ Plaza

One light point controlled by one switch.

One fan point controlled by one switch.

One Exhaust fan point controlled by one switch.

One 3 pin socket outlet 5 Amps, indipendent board with cables 1.5 Sqmm size.

One bell/buzzer point controlled by one push button with other switches on indipendent board with cable 1.5 Sqmm size.

One light point controlled by two 2- way switches, with cable 1.5 Sqmm size.

All as per item No.04 here-in-before but one 3 pin socket outlet 5 /15 Amps, independent board with cables 4 sqmm size. Make: Polycab /Finolex /Plaza

Material and labour for point wiring with 1.5 sqmm single core PVC insulated FRLS unsheathed multi stranded copper conductor drawn into including PVC casing and caping /fixed on wall /roof /ceiling etc., of size not less than 20mm including provision of 1.5 sqmm single core PVC insulated FRLS unsheathed multi stranded copper conductor as earth wire and cast iron/ pressed steel terminal boxes for mounting switches, sockets, fan regulator etc., with 3mm thick plastic laminated sheet cover complete for the following complete all as specified and as directed by Engr-in-charge. Make for PVC casing and caping: SUDHAKAR/ AVON PLAST/ PLAZA Make for Copper cable: Finolex/ Polycab /Plaza

One light point controlled by one switch

One 3 pin socket outlet 5 Amps, independent board with cables 1.5 sqmm size

All as per item No.06 here-in-before but one 3 pin socket outlet 5 /15 Amps, independent board with cables 4 sqmm size. Make: Polycab /Finolex /Plaza

Material and labour for sub main wiring for phase and neutral with PVC FRLS insulated unsheathed multi stranded along with earth wire FRLS PVC insulated copper conductor, single core cable in and including surface/ concealed /PVC conduit of appropriate size for the following sizes complete all as specified and as directed by Engr-in-charge. Notes: (i) Cutting chases for concealed wiring shall be measured and paid seperately. (ii) Rates are including taking down old unserviceable. Make for Copper cables: Finolex /Polycab/ Plaza Make of PVC Conduit: SUDHAKAR /FINOLEX /AVON PLAST

2x2.5 sqmm and 1x2.5 sqmm as earth wire

2x4 sqmm and 1x4 sqmm as earth wire

2x6 sqmm and 1x6 sqmm as earth wire

2x10 sqmm and 1x10 sqmm as earth wire

2x16 sqmm and 1x16 sqmm as earth wire

4x10 sqmm and 2x10 sqmm as earth wire

4x16 sqmm and 2x16 sqmm as earth wire

Supply and fix in repair for switch piano, flush type single pole, one way 5 Amp complete all as specified and as directed by Engr-in-charge. Make: Anchor /Cona /Leader

Supply and fix in repair for switch socket combination 2 in 1, 3 pin, 5 Amp flush type complete all as specified and as directed by Engr-in-charge. Make: Anchor /Cona /Leader

Supply and fix in repair for bell push flush type, 5 Amp complete all as specified and as directed by Engr-in-charge. Make: Anchor /Cona /Leader

Supply and fix in repair for switch piano, flush type single pole, two way 5 amp complete all as specified and as directed by Engr-in-charge. Make: Anchor /Cona /Leader

Supply and fix in repair for switch socket combination 2 in 1, 3 pin, 5 and 15 Amp flush type universal complete all as specified and as directed by Engr-in-charge. Make: Anchor /Cona /Leader

Supply and fix in repair for ceiling rose three terminals/ PVC/ polycarbonate, isolated body complete all as specified and as directed by Engr-in-charge. Make: Anchor /Cona /Leader

Supply and fix in repair for lamp holder angular /batten type, PVC/ polycarbonate type with back plate complete all as specified and as directed by Engr-in-charge. Make: Anchor /Cona/ Leader

Supply and fix in repair stepped type electronic fan regulator flush type on the existing laminated sheet etc., complete all as specified and as directed by Engr-in-charge. Make: Anchor /Cona /Leader /Lisha

Supply and fix for high efficiency wall mounted LED batten type not less than 18W 4 ft LED light fitting and including taking down old unserviceable fittings complete all as specified and as directed by Engr-in-charge. Make: Crompton Cat Part No. LDL-20-CDL/ Surya Roshini Ltd Cat Part No. SLE BTN T8 20W/ Philips /Wipro/ Luker Technologies Pvt Ltd

Supply and fix for high efficiency wall mounted LED batten type not less than 9W 2 ft LED light fitting and including taking down old unserviceable fittings complete all as specified and as directed by Engr-in-charge. Make: Crompton Cat Part No. LDL-10-CDL /Surya Roshini Ltd Cat Part No. SLE BTN T8 10W /Philips /Wipro/ Luker Technologies Pvt Ltd

Supply and fix for energy saving not less than 25 Watts LED light fitting, IP66 powder coated pressure die cast aluminium high power street light with heat resistant toughened glass with lens by providing GI pipe medium grade 25mm dia 1.5m in length with suitable size MS clamps two nos made out of 25x3mm FI including two coats of synthetic enamel paint over a coat of red oxide primer, prewired and including connecting up with 3 core flexible copper conductor cable of 1.5 sqmm from ceiling rose to fitting and including taking down old unserviceable damaged complete all as specified and as directed by Engr-in-charge. Make: Crompton Cat Part No. LSTS-25-CDL-M /Surya Roshini Ltd Cat part No. SLE UL 25W IP66 LXN /Philips /Wipro/ Luker Technologies Pvt Ltd

Supply and fix for sheet metal enclosure vertical TPN MCCB DB 4 way double door with spreader terminals, insulating phase barrier and hardware with neccesary arrangements complete all as specified and as directed by Engr-in-charge. Notes: (i) Including taking down old unserviceable DB, MCCB and MCB's. (ii) MCCB and MCBs shall be measured and paid separately under the respective item of schedule. Make: L&T/ Legrand/ Siemens /Schneider /ABB

Supply and fix for sheet metal enclosure vertical TPN MCCB DB 8 way double door with spreader terminals, insulating phase barrier and hardware with neccesary arrangements complete all as specified and as directed by Engr-in-charge. Notes: (i) Including taking down old unserviceable DB, MCCB and MCB's. (ii) MCCB and MCBs shall be measured and paid separately under the respective item of schedule. Make: L&T/ Legrand/ Siemens /Schneider /ABB

Supply and fix for sheet metal enclosure vertical TPN MCCB DB 12 way double door with spreader terminals, insulating phase barrier and hardware with neccesary arrangements complete all as specified and as directed by Engr-in-charge. Notes: (i) Including taking down old unserviceable DB, MCCB and MCB's. (ii) MCCB and MCBs shall be measured and paid separately under the respective item of schedule. Make: L&T/ Legrand/ Siemens /Schneider /ABB

Supply and fix for MCCB 4 pole sheet metal enclosure with double door with spreader terminals, insulating phase barrier and hardware with neccesary arrangements complete all as specified and as directed by Engr-in-charge. Notes: (i) Including taking down old unserviceable DBs and MCCBs. (ii) MCCB shall be measured and paid separately under the respective item of schedule. Make: L&T/ Legrand/ Siemens /Schneider /ABB

Supply and fix for MCB, DB SPN 12 way double door DB with 200 Amps rated copper bus bar in SS enclosure double door type complete all as specified and as directed by Engr-in-charge. Note: MCB SPN/ SP shall be measured and paid under the respective item of the schedule. Make: L&T/ Legrand/ Siemens /Schneider /ABB

Supply and fix for MCB, DB SPN 08 way double door DB with 200 amps rated copper bus bar in SS enclosure double door type complete all as specified and as directed by Engr-in-charge. Note: MCB SPN/ SP shall be measured and paid under the respective item of the schedule. Make: L&T/ Legrand/ Siemens /Schneider /ABB

Supply and fix for MCB, DB SPN 04 way double door DB with 200 amps rated copper bus bar in SS enclosure double door type complete all as specified and as directed by Engr-in-charge. Note: MCB SPN/ SP shall be measured and paid under the respective item of the schedule. Make: L&T/ Legrand/ Siemens /Schneider /ABB

Supply and fix for MCB, DB SPN 02 way in SS enclosure type complete all as specified and as directed by Engr-in-charge. Note: MCB SPN/ SP shall be measured and paid under the respective item of the schedule. Make: L&T/ Legrand/ Siemens /Schneider /ABB

Supply and fix for MCCB 4 Pole, 415 V, adjustable thermal and magnetic setting type 250 Amps with breaking capacity 36KA complete all as specified and as directed by Engr-in-charge. Make: L&T/ Legrand/ Siemens /Schneider /ABB Note: Including taking down old unserviceable

Supply and fix for MCCB 4 Pole, 415 V, adjustable thermal and fixed magnetic setting type 200 Amps with breaking capacity 25 KA complete all as specified and as directed by Engr-in-charge. Make: L&T/ Legrand/ Siemens /Schneider /ABB Note: Including taking down old unserviceable

Supply and fix for MCCB 4 Pole, 415 V, adjustable thermal and fixed magnetic setting type 150 /160 Amps with breaking capacity 25 KA complete all as specified and as directed by Engr-in-charge. Make: L&T/ Legrand/ Siemens /Schneider /ABB Note: Including taking down old unserviceable

Supply and fix for MCCB 4 Pole, 415 V, adjustable thermal and fixed magnetic setting type 125 Amps with breaking capacity 16 KA complete all as specified and as directed by Engr-in-charge. Make: L&T/ Legrand/ Siemens /Schneider /ABB Note: Including taking down old unserviceable

Supply and fix for MCCB 4 Pole, 415 V, adjustable thermal and fixed magnetic setting type 100 Amps with breaking capacity 16 KA complete all as specified and as directed by Engr-in-charge. Make: L&T/ Legrand/ Siemens /Schneider /ABB Note: Including taking down old unserviceable

Supply and fix for MCB TP 415 V, 63 Amps with breaking capacity 10KA 'C' curve complete all as specified and as directed by Engr-in-charge. Make: L&T/ Legrand/ Siemens /Schneider /ABB Note: Including taking down old unserviceable

Supply and fix for MCB TP 415 V, 40 Amps with breaking capacity 10KA 'C' curve complete all as specified and as directed by Engr-in-charge. Make: L&T/ Legrand/ Siemens /Schneider /ABB Note: Including taking down old unserviceable

Supply and fix for MCB SPN 230 V, 40 to 63 Amps with breaking capacity 10KA 'C' curve complete all as specified and as directed by Engr-in-charge. Make: L&T/ Legrand/ Siemens /Schneider /ABB Note: Including taking down old unserviceable

Supply and fix for MCB SP 230 V, 6 to 32 Amps with breaking capacity 10KA 'C' curve complete all as specified and as directed by Engr-in-charge. Make: L&T/ Legrand/ Siemens /Schneider /ABB Note: Including taking down old unserviceable

Supply and fix for sheet metal enclosure single pole and neutral with a two pin and earth plug and socket complete with one SP MCB 20 to 32 Amps complete all as specified and as directed by Engr-in-charge. Make: L&T/ Legrand/ Siemens /Schneider /ABB Note: Including taking down old unserviceable

Material and labour for earthing complete with GI earth plate electrode of size 600x600x6mm thick buried directly in ground vertically to a depth of not less than 2.25m below ground level, with top edge of the earth plate at a depth of not less than 1.5m below ground level connected with and including GI earth wire 4mm dia including alternate 5 layers of charcoal, salt crystal and including 15mm dia GI pipe light grade by means of nuts, bolts, washers and necessary earth work upto 7.5m and connecting to test point, LT switchgear etc., as per site requirement including necessary excavation, earth work in any type of soil, PCC (1:3:6) type C-1 earth chamber, 40mm thick RCC cover with 6mm dia MS bars 10 mm c/c on both ways as reinforcement complete all as shown in elecrical plate No. 3 of SSR Pt- I including testing on completion complete all as specified and as directed by Engr-in-charge. Note: (i) Quoted rate deemed to include necessary earth work PCC chamber, RCC cover, reinforcement, removal of surplus soil, site clearance etc.,

Material and labour for GI pipe 15mm light grade galvanised, with all fitting laid in trenches complete all as specified and as directed by Engr-in-charge.

Supply and fix for PVC insulated copper conductor (flexible), industrial cables PVC sheathed cables, 1100 volts, size of conductor 1.5 sqmm, 1 core complete all as specified and as directed by Engr-in-charge. Make: Finolex/ Plaza/ Polycab

Material and labour for cutting chases on brick walls concrete surfaces not exc 10cm girth and making good in cement mortar 1:3 the existing surface after carryiing out the concealed wiring including necessary finishes complete all as specified and as directed by Engr-in-charge.

Material and labour for aluminium strip 25x3mm with saddles (ebonite insulator) and fixing screws etc., for roof conductors and down conductors above ground upto 20m height including necessary fixing arrangement like scaffolding, ladder etc., and including taking down old unserviceable complete all as specified and as directed by Engr-in-charge.

Material and labour for air termination, single pointed aluminium rod 12mm dia and 300mm long for lightning conductors including taking down old unserviceable complete all as specified and as directed by Engr-in-charge.

Material and labour for test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 Nos. 8mm dia 25mm long hex. head screws including taking down old unserviceable complete all as specified and as directed by Engr-in-charge.

Fixing only aluminium strip with saddles (ebonite insulator) and fixing screws etc., for roof conductors and down conductors above ground upto 20m height including necessary fixing arrangement like scaffolding, ladder etc., complete all as specified and as directed by Engr-in-charge.

Supply and fix for high efficiency 24 watts 2x2 sqft LED light with panel for recesssed /surface mounting dust free installation with high brightness LEDs for glare free homogenous illumination and suitable for ceilling cut out 600x600mm complete all as specified and as directed by Engr-in-charge. Note: Including taking down the existing unserviceable FTL fittings. Make: Crompton Cat Part No. LCTLRNE-24-FO-CDL /Surya Roshini Ltd/ Philips /Wipro/ Luker Technologies Pvt Ltd

Supply and fix for wall mounted LED indoor wall light type not less than 7W (WW) and including taking down old unserviceable fittings complete all as specified and as directed by Engr-in-charge. Make: Luker Technologies Pvt Ltd Cat Part No. LWL 110-1 /Philips/ Surya Roshini Ltd/ Wipro /Crompton

Supply and fix for 230 V, 1200mm fan complete all as specified and as directed by Engr-in-charge. Make: Smart Saver-50 of Orient /Crompton /Bajaj /Usha

Supply and fix in repair for MCB TPN 415 V, 63 Amps with breaking capacity 10KA 'C' curve complete all as specified and as directed by Engr-in-charge. Make: L&T/ Legrand/ Siemens /Schneider /ABB Note: Including taking down old unserviceable.

Supply and fix in repair MCB TPN 415 V, 40 Amps with breaking capacity 10KA 'C' curve complete all as specified and as directed by Engr-in-charge. Make: L&T/ Legrand/ Siemens /Schneider /ABB Note: Including taking down old unserviceable.

Supply and fix in repair of GI metal flush box suitable for mounting modular plate of following modules complete all as specified and as directed by Engr-in-charge. Make: Havells (Crabtree)/ Legrand/ Anchor

3 Module

6 Module

Supply and fix in repair of combined both frame and cover plates fixing on mounting boxes for following modules complete all as specified and as directed by Engr-in-charge. Make: Havells (Crabtree) /Legrand /Anchor

Cover plate with frame, 3 Module

Cover plate with frame, 6 Module

Supply and fix for modular switch one way 5 /6A white active one module complete all as specified and as directed by Engr-in-charge. Make: Havells (Crabtree) /Legrand /Anchor

Supply and fix in repair of modular switch socket combination 16 A, 6 pin 3 module flush type active white two module complete all as specified and as directed by Engr-in-charge. Make: Havells (Crabtree) /Legrand /Anchor

Supply and fix in repair of modular switch socket combination 5 Amp, 5 pin flush type active white two module complete all as specified and as directed by Engr-in-charge. Make: Havells (Crabtree) /Legrand /Anchor

Supply and fix in repair of socket 2M 6A-2 /3 pin combined active white complete all as specified and as directed by Engr-in-charge. Make: Havells (Crabtree) /Legrand /Anchor

Dismantling of asbestos cement (corrugated, semi corrugated, etc.,) sheets in roof coverings complete all as specified and as directed by Engr-in-charge.

Supply and fix for prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed by Engr-in-charge.

Supply and fix for prepainted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering /ridge /cladding to wall, fixed with self tapping screws complete all as specified and as directed by Engr-in-charge.

Demolition of existing roof treatment of brick tiles or terracing tiles, single layer on roofs complete all as specified and as directed by Engr-in-charge.

Material and labour for cutting out cracks to 'V' section in existing roofs or terracing, cleaning out and filling solidly with a hot mixture of bitumen and clean dry sand 1:1 (by weight) complete all as specified and as directed by Engr-in-charge.

Roughening surfaces of old concrete slab by picking sweeping clean and washing down with water to remove dust etc., and applying evenly cement slurry at the rate of 3 Kg/ Sqm over cleaned roof surfaces complete all as specified and as directed by Engr-in-charge.

Material and labour for PCC 1:2:4 type B-0 (Using 12.50mm graded stone aggregate) including mixing of admixture fosroc SP 430 of M/S Fosroc chemical @ 250ml per 50kg of cement over existing roof and in padding concrete to maintain required slope and minimum thickness being 20mm complete all as specified and as directed by Engr-in-charge.

Supply only admixture fosroc SP 430 chemical complete all as specified and as directed by Engr-in-charge.

Material and labour for 5mm thick cement screed in cement mortar 1:4 with water proofing compound at the rate of 3% by weight of cement to have a smooth surface for laying of water proofing membrane complete all as specified and as directed by Engr-in-charge. Note: WPC will be measured and paid separetely.

Supply only integral water proofing compound complete all as specified and as directed by Engr-in-charge.

Material and labour for 3mm thick APP based polymeric membrane minimum weighing 3 kg/ sqm non-woven polyester reinforcement polymeric water proofing membrane (weight not less than 150 gms/sqm) laid on primed surfaces by gas flame torch application and apply one coat of industrial bitumen 85/25 grade at the rate of 1.20 Kg/Sqm over APP memberene complete all as specified and as directed by Engr-in-charge.

Material and labour for applying a coat of bituminous aluminium paint @0.10kg/Sqm as weather proof coat complete all as specified and as directed by Engr-in-charge.

Removing demolised building materials/ debris etc., to a distance exc 250m but not exc 500m and deposited where defence land area complete all as specified and as directed by Engr-in-charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish removed outside the defence land complete all as specified and as directed by Engr-in-charge.

Material and labour for coloured non skid ceramic tiles 7mm thick (square/ rectangular) area of each tile exc 0.11 sqm but not exc 0.18 sqm in floors etc., over 15mm thick screed bed in cement mortar 1:4 set set and jointed in neat cement slurry and pointed in coloured cement complete all as specified and as directed by Engr-in-charge.

Material and labour for coloured glazed ceramic tiles in vertical surface set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick back coat in CM 1:3 complete all as specified and as directed by Engr-in-charge.

Demolition of brick work built in cement mortar including all quoins, arches, pillars etc., complete all as specified and as directed by Engr-in-charge.

Material and labour for old size brickwork with subclass 'B' bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and as directed by Engr-in-charge.

Material and labour for brickwork with subclass 'B' bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and as directed by Engr-in-charge.

Taking down cement plaster on brick wall or concrete surfaces, etc., including racking out joints, hacking for key, scrubbing down with water, etc., complete all as specified and as directed by Engr-in-charge.

Material and labour for rendering 10mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces, finished fair and even complete all as specified and as directed by Engr-in-charge.

Material and labour for roller application of two coats of oil bound distemper on newly plaster wall surfaces including applying 3mm thick birla /JK putty over a coat of primer of surfaces complete all as specified and as directed by the Engr-in-charge.

Material and labour for complete removal of existing treatment on old decorated plastered or unplastered surface walls by scrapping with steel wire brush, washing and cleaning and applying two coats of oil emulsion distemper a layer of wall care putty 3mm thick over a coat of wall primer, at any height of building/ tower complete all as specified and as directed by Engr-in-charge.

Material and labour for 20mm thick granite (of any type) tiles machine cut in skirting /dado, etc., laid over cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and grinding, polishing, including 1:4 of cement mortar 15mm thick screed bedding complete all as specified and as directed by Engr-in-charge.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed by Engr-in-charge.

Supply and fix in repairs wash hand basin vitreous china, white, flat back, size 550x400mm excluding taps, waste, chain and plug and including brackets complete all as specified and as directed by Engr-in-charge.

Supply and fix for 32mm dia waste coupling of PTMT (half or full threaded) minimum weight 32mm 45 gms complete all as specified and as directed by Engr-in-charge.

Supply and fix in repairs 15mm dia pillar taps, cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with or without letterred 'Hot' or 'Cold' with long screwed shanks and flynuts, screwed for iron pipe complete all as specified and as directed by Engr-in-charge.

Supply and fix for 15mm dia stop valve cast copper alloy, chromium plated, fancy type, screwed down, high pressure, screwed down for GI pipe complete all as specified and as directed by Engr-in-charge.

Supply and fix for 15mm dia bib taps, cast copper alloy, chromium plated, fancy type, screwed down, high pressure, screwed down for GI pipe complete all as specified and as directed by Engr-in-charge.

Supply and fix in repair coloured vitreous china wash down water closet pan (pedestal pattern) including vitreous china valveless, syphonic action type, coloured flushing cistern, 10 litres capacity, low level with inlet, ball valve, float and handle including bracket, flush pipe of polyethylene of low or high density of PVC 32 mm dia, for low level cisterns and plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device including jet spray complete all as specified and as directed by Engr-in-charge.

Taking down chowkats or frames of any discription exc 1.5 sqm and not exc 4 sqm each with shutters (without taking off shutter from the frame) complete all as specified and as directed by Engr-in-charge.

Supply and fix for solid PVC door frame of size 50x47mm made out of 5mm plain clour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification complete all as specified and as directed by Engr-in-charge.

Supply and fix in repairs factory made solid panel PVC moulded door shutter, 28 to 30mm thick (styles), with 2, 4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face and 2mm plain colour PVC sheet on back face, supplying and fixing in frame at site as per specification complete all as specified and as directed by Engr-in-charge.

Supply and fix for 100mm size stainless steel butt hinges of medium weight and fixed with screws complete all as specified and as directed by Engr-in-charge.

Supply and fix for 150mm long aluminium anodised barrel tower bolts of extruded section and fixed with screws etc., complete all as specified and as directed by Engr-in-charge.

Supply and fix for 10 litres capacity PVC valveless, syphonic action type flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and as directed by Engr-in-charge.

Supply and fix for tubular towel rail brass chromium plated, 20mm dia 'D' type, 60 cm long between flanges complete all as specified and as directed by Engr-in-charge.

Supply and fix for PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and as directed by Engr-in-charge.

Supply and fix for 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed by Engr-in-charge.

Supply and fix in repair 1000 ltrs capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) triple layer hoisted and fixed in position complete all as specified and as directed by Engr-in-charge.

Supply and fix for 20mm ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (Minimum weight 210 gms) complete all as specified and as directed by Engr-in-charge.

Supply and fix for 20mm dia gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed by Engr-in-charge.

Taking up or down steel tubing and connections of 15mm dia complete all as specified and as directed by Engr-in-charge.

Taking up or down steel tubing and connections of 20mm dia complete all as specified and as directed by Engr-in-charge.

Supply and fix for tubes, ‘medium grade’ galvanized, with all fittings and fixed complete to walls and ceilings or laid in floors of 15mm dia including cutting /chasing in walls etc., complete all as specified and as directed by Engr-in-charge.

Supply and fix for tubes medium grade galvanized with all fittings and fixed to walls or laid in floors of 20mm bore complete all as specified and as directed by Engr-in-charge.

Supply and fix in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement mortor to dwarf wall or cantilever brackets and connecting union to pipe overall size 915x460mm, bowl size 410x330x160mm complete all as specified and as directed by Engr-in-charge.

SIVA ENTERPRISES

SRI VIGNESH BUILDERS

R.P.TRADERS

D.KUMAR

Raju Builders

RD ENTERPRISES

BALA BUILDERS

N SRINIVASAN

C SRINIVASAN