Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹34.6 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹36.2 L+₹1.6 L (4.69%)Rejected-Finance H NO 177 GOVINDPURA SATWARI JAMMU CANTT 180003 J K | JAMMU | JAMMU AND KASHMIR | 180003 | L2 | Rejected-Finance Other than L1 | |
| 3 | L3₹36.9 L+₹2.4 L (6.90%)Rejected-Finance | L3 | Rejected-Finance Other than L1 | |
| 4 | L4₹37.8 L+₹3.3 L (9.45%)Rejected-Finance | L4 | Rejected-Finance Other than L1 | |
| 5 | L5₹38.0 L+₹3.4 L (9.85%)Rejected-Finance | L5 | Rejected-Finance Other than L1 |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
22 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Satwari
GE Satwari Jammu
PERIODICAL SERVICES INCLUDING REPAIRS TO ROOFS RAIN WATER PIPES EXTERNAL PLASTER WINDOW GLASS PANES ETC TO JCOS/OR MD ACCN AND OTM ACCNS AT Y STATION UNDER AGE B/R I AT GE SATWARI
2023_MES_600419_1
GEJM-17/2023-24
Open Tender
Civil Works
Item Rate
270 days
GE Satwari
D Class Cat a i
9 documents required · 9 mandatory
₹500
GE Satwari
₹80,000
Yes
12 Aug 2023
2 Jun 2023
24 Jun 2023
2 Jun 2023
22 Jun 2023
17 Jun 2023
Amount
Note :-1. Work will be carried out upto 4th storey of bldgs also as per direction of Engr-in-charge including necessary formwok and scaffolding required as per site conditions & no extra payment shall be made on this account. 2.Contractor should also resolve the day to day problems/ complant related to item no 01 to 162 in piece meal as per requirement and give the feedback to the Engr-in-charge within next 24 hours about the work done and complete site will not be vacated for the same,only requirement basis site for work will be handed over and work will be carried out up to 4th storey
Preparation of old decorated brick /concrete, plastered /un-plastered surfaces of walls, pillars, cornices etc (upto four storey bldgs) by booming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots, rubbing with sand paper and applying one coat of lime white wash on the walls, pillars, cornices etc. complete all as specified and directed.
Preparation of old decorated brick /concrete, plastered /un-plastered surfaces of ceilings, cornices etc by booming down with steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, oil, greasy spots , rubbing with sand paper and applying one coat of white wash on ceiling, complete all as specified and directed.
Preparation of old decorated brick/concrete/ plastered/unplastered surfaces of walls, Pillars, cornices etc by booming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts, trading oil and greasy spots, rubbing with sand paper and applying one coat of oil emulsion distemper on walls, pillars,cornices surface including making good uneven surface/holes with birla wall care putty coloured in same shade where ever required etc. complete all as specified and directed.
Complete removal of existing treatment including washing, rubbing down with sand paper and stopping of distempered and painted surfaces including preparation of old plastered surfaces of walls and applying two coats of distemper oil emulsion over and including one coat of primer over one coats of Birla wall care putty 1 to 2 mm thick on plastered surfaces, preparatory to distempering. complete all as specified and as directed by Engineer-in-charge.
Preparation of old decorated brick/concrete/ plastered/unplastered surfaces of walls, Pillars, cornices etc by booming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts, trading oil and greasy spots, rubbing with sand paper and applying one coat of cement base paint on walls, pillars, cornice etc (upto 4th storey with necessary scaffolding complete all as specified and directed.
Preparation of old decorated brick/concrete/ plastered/unplastered surfaces of walls, Pillars, cornices etc by booming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts, trading oil and greasy spots, rubbing with sand paper and applying two coats of cement base paint on walls, pillars, cornice etc (upto 4th storey with necessary scaffolding complete all as specified and directed.
Complete removal of existing treatment including washing, rubbing down with sand paper and stopping of painted surfaces including preparation of old plastered surfaces of walls, chajjas, fascia, face of columns, beams etc. and applying one coat of weather proof exterior emulsion (APEX) making good uneven surface/holes with Birla wall care putty coloured in same shade where ever required etc (up to 2nd storey with necessary scaffolding) complete all as specified and directed.
Preparation of old painted wooden surfaces having width/girth exceeding 10 cm including necessry putty filling with knife of same colour where required to achieve smooth and even surface and applying one coat of synthetic enamel paint on wood surfaces of any description ( up to 4th storey with necessary scaffolding) complete all as specified and directed
Preparation of old painted steel surfaces having width/girth exceeding 10 cm including necessry rubbing with sand paper or grinding by hand grinder to achieve smooth and even surface and applying one coat of synthetic enamel paint on steel surfaces of any description ( up to 4th storey with necessary scaffolding) complete all as specified and directed
Taking down shutters of any description exc 1.00 Sqm and not exc 2.00 Sqm each as specified & directed.
Taking down shutters of any description exc 2.00 Sqm each all as specified & directed.
Taking down chowkats or frames with shutter (without taking off shutter from the frame) n.exc 1.5 Sqm each including cutting holes for taking out hold fast or dismantling brick work and removing from site all as specified.
Taking down chowkats or frames with shutter (with out taking off shutter from the frame) exc 1.5 sqm & n. exe 4 sqm each incl cutting holes for taking out hold fast or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt.) all as specified and directed By Engr-in-charge.
S & F pressed steel frames made of size 1.25mm thick MS steel for door with one or more rebates incl lugs, hold fast, lock strike plate etc complete of size 105 x 60mm including PCC 1:3:6 as in back fill to chowkats all as spfd.
S & F pressed steel frames made of size 1.25mm thick MS steel for door with one or more rebates incl lugs, hold fast, lock strike plate etc complete of size 125 x 60mm including PCC 1:3:6 as in back fill to chowkats all as spfd.
M&L 35 mm thick 2nd class hard wood, Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply. The size of rail and stile as per IS : 1003 (Part I), complete all as speciied.
S&F 35mm thick 2nd class hard wood glazed and skelton shutters open rebated and prepared to receive gauge etc without sash bar but with lock rail fitted with cut and mitered beads.
M&L Flush shutters, 30 mm thick solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified. Note:- Sampel approved by Engr-in-Charge or GE.
S&F in repair Soild PVC door frame of size 50 mm x 47mm made out of 5 mm plain coloured PVC sheet, reinforced with MS square tube supplying and fixing in opening as per specification and drawing.
S & Fin repair Factory made solid panel PVC door shutter 30 mm thick ( style ) consisting of frame work made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour P.V.C‘ C’ channel having a PVC sheet strip 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheet for top rail lock rail and bottom rail on either side and as gap inserts for top rail; and bottom rail paneling of plain, colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles and rail with suitable PVC sheets beading and jointed together with solvent cement S&F in frame at site as per specification.
Pressed steel cup board frame of MS sheet 1.25 mm thick size of frame 60 x 40 mm with rebate of 20 mm wide and 12 mm deep including PCC 1:2:4 as in filling to back of chowkats , Piano hinges measured separately.
S & F in repair continuous (piano) hinges, heavy duty mild steel, bright finish or electrogalvanised sutable for 30mm thick shutter and fixed, complete all as specified. ( ISI Marked)
S&F in repair Material & labour for 18/19 mm thick MDF board as in shutters/shelves etc exterior grade prelaminated one side with decorative choice lamination and other side balancing white lamination fixed to frame work with leaping (10 to 5 mm thick three side and 20 to 15 mm thick leaping hinge side) around the shutter and fix with screws to etc complete all as specified and directed.
S & F butt hinges of mild steel cold rolled medium weight of size 100mm as specified.
S&F Aluminium anodised, barrel tower bolts size 200 mm of extruded section and fixed complete all as specified. (ISI Marked)
S&F Aluminium handles, cast type, anodised Size-150mm, anodised section and fixed complete all as specified. (ISI Marked)
S&F Aluminium alloy, anodised, sliding door bolt Size- 250 mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed cpmplete all as specified.
S&F aluminium Floor door stopper fixed complete all as specified.
S&F in repair aluminium extruded section body, door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed.
S & F in repair mild steel helical/ordinary rat tail rod pattern door spring 300mm including roller and roller plate complete fixed with welding all as specified.
S&F in repair 25mm outer dia stainless steel decorative drapery rod of thickness 20-22 gauge and with stainless steel brackets near to ends with stainless steel finials for 25mm dia drapery rod at both ends. The drapery rod shall be projecting 150 mm outer side from the clesr opening of doors/windows. ( Including necessary fittings)
Supply and fixing 4.80 mm thick glass sheet ordinary quality Tinted ( approved by Engr-in-Charge/ GE) and glazed in squares, exceeding 0.5 Sqm in each pane.
Supply and fixing 4mm thick aluminium composite panel (coloured sheet) and in additional other accessories for fitting complete all as specified by Engr-in-Charge.
Supply and fixing in repair double action door spring hydraulically regulated (heavy duty) made of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass other parts made of mild steel heavy duty. (ISI Marked)
M&L 12 mm thick toughened hard glass of approved quality as in doors/windows/ partition wall including complete fixing accessories ( lock, Hydraulic door closer, Hinges arrangements, approved by Engr-in-charge/GE) complete all as per manufacturers instruction and as directed by Engr-in-Charge.
S&F steel window 1.25 mm thick Box type (Double Shutter) ERW hollow P section of size 60 mm x 25 mm single rebated comprises glazed & wire gauged skelton shutter ERW sec 50 mm x 20 mm and 1 mm thick with two Nos sash bar of T- section 20 mm x 3 mm complete welded to frame with one vertical mullion of ERW box type T- section of size 60 mm x 25 mm and 1.25 mm thick including cutting holes and making good dismantled portion in PCC 1:2:4 type B-1 four No for each window incl following fitting welded to frame shutter hold fast of 150 mm long of 12 mm x 3 mm FI made to shape 4 No, handle of Z section 20 mm x 25 mm x 100 mm long 1 No per leaf, MS tower bolt 150 mm long 2 No per leaf, Z sec 20 mm x 25 mm, 100 mm long stopper 1 No on per leaf, MS Pintal hinges of size 75 mm x 12 mm 2 No per leaf fabrication, 10 mm Square bar gril, specing of gril 100 mm center to center and fixing arrangement as per drg No CEPZ/TD-324,325/0 ( Note:- Grill measured separately)
S&F steel Ventilator ( N exc 0.70 Sqm) 1.25 mm thick Box type (Double Shutter) ERW hollow P section of size 60 mm x 25 mm single rebated comprises glazed & wire gauged skelton shutter ERW sec 50 mm x 20 mm and 1 mm thick with two Nos sash bar of T- section 20 mm x 3 mm complete welded to frame with one vertical mullion of ERW box type T- section of size 60 mm x 25 mm and 1.25 mm thick including cutting holes and making good dismantled portion in PCC 1:2:4 type B-1 four No for each window incl following fitting welded to frame shutter hold fast of 150 mm long of 12 mm x 3 mm FI made to shape 4 No, handle of Z section 20 mm x 25 mm x 100 mm long 1 No per leaf, MS tower bolt 150 mm long 2 No per leaf, Z sec 20 mm x 25 mm, 100 mm long stopper 1 No on per leaf, MS Pintal hinges of size 75 mm x 12 mm 2 No per leaf fabrication, 10 mm Square bar gril, specing of gril 100 mm center to center and fixing arrangement as per drg No CEPZ/TD-324,325/0 ( Note:- Grill measured separately)
S&F Mild steel works of flat iron, square bar, round bars etc. as in framed work such as grills, guard bars, gratings etc incl bending, cutting and welding as necessary of confirming to Gde Fe 310-0 all as specified.
Hacking out old broken glass (any thickness,size quality or description) from any types of wooden/steel/alum frames or stone concrete or brick surrounds glazed with putty or fixed with beads.
S&F 4 mm thick sheet glass ordinary quality glazing with steel pins,oil putty to steel windows and, beads nails etc to wooden surfaces as in square exc 0.50 sqm in each pane, all as specified.
S&F 4 mm thick figured glass, pin head/frosted type and glazing with oil putty in square n.exc 0.5 sqm in each pane.
S&F Galvanised mild wire cloth. 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with stainless steel wire staples complete all as specified.
S&F in repair Bib tap long body 15 mm bore, standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/20mm- 125gms). Complete all as specified.
S&F in repair Single Lever Basin Mixer without Popup waste with 450mm Long Braided Hoses fancy type complete all as specified.
S&F in repair CP pillar cock with 450mm long braided hose, 15 mm bore fancy type complete all as specified and directed by Engr-in-charge/ GE.
S&F in repair angle valve with wall flange , cast copper alloy, chromium plated fency type screwed for 15 mm iron pipe, complete all as specified.
S&F in repair CP Bib taps,long body, fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for 15 mm brass ferrule and fixed all as specified complete all as specified.
S&F in repair Concealed Stop Cock Heavy Body Casted Cap 15 mm complete all as specified.
S&F in repair Wall Mixer 3-in-1 System with Provision for Both Hand Shower & Overhead Shower Complete with 115mm Long Bend Pipe, Connecting Legs & Wall Flange (Without Hand & Overhead Shower) fancy type complete all as specified.
S&F in repair angular stop cock with wall flange , cast copper alloy, chromium plated fency type screwed with wall flange sutable for 15 mm iron pipe, complete all as specified.
S&F in repair Bib Cock with Wall Flange cast copper alloy, chromium plated fency type screwed with wall flange sutable for iron pipe, 15 mm bore complete all as specified.
S&F in repair Hand Shower 120mm dia Round Shape Multi Flow with Cascade Effect (ABS Body Chrome Plated with Gray Face Plate) with Rubit Cleaning System complete all as specified.
S&F in repair Sink Cock with Swinging Spout (Wall Mounted Model) with Wall Flange complete all as specified.
S&F in repair Cromium plated, minimum 20 mm dia, single towel rail 600mm long complete all as specified.
S&F in repair Cromium plated, towel ring square, complete all as specified.
S&F in repair CP soap dish holder complete all as specified.
S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long with aluminium alloy brackets and guard rail complete all as specified.
S&F in repair Corner Glass Shelf (with Bracket) as per directed by Engr-in-charge.
S&F in repair Overhead Shower 125 mm dia round shape single flow with shower arm , complete all as specified.
S&F in repair Single piece-WC with UF soft close seat cover, Hinges, Fixing Accessories Set and Accessories Set,Cistern fittings, Size: 660 x 365 x 765mm, S Trap-300mm complete all as specified.
S&F in repair Urinal with complete accessories Set, cp waste cuppling, waste pipe, sprader etc. Size: 375 x 390 x 590mm complete all as specified.
S&F in repair Urinal with complete sensor set and accessories, and CP waste cuppling, waste pipe, sprader etc. Size: 360 x 330 x 740mm complete all as specified.
S&F in repair urinal sprader cpmplete all as specified complete.
S&F in repair Urinal partition fixing accessories complete all as specified.
S&F in repair under counter basin with fixing accessories set, size: 560 x 470mm, Oval shape, including CP cuppling and PVC waste pipe complete all as specified.
S&F in repair Wall Hung Basin with Fixing Accessories Set, Size : 510 x 400mm, including cuppling and pvc waste pipe complete all as specified.
S&F in repair full pedestal for WHB complete all as specified.
S&F in repair single flush Cistern with Drainage L-Bend Pipe with Gasket & Installation Kit (Suitable for EWC), complete all as specified.
S&F in repair Vitreous china wash down water closet white colour, Size(520x360x390) with 'S' trap, closed pattern with flat bottom, including seat cover complete all as directed.
Supply and fixing PVC Waste pipe 32mm bore for required length complete with waste coupling.
Supply and fixing PVC Waste pipe, sutable for urinal, 50/40 mm bore for required length complete all as specified.
Supply and Fixing corner entry enclosures with door sliding to both sides in 6mm glass & standard size : (H: 1950 W: 1000 ×1000mm).complete all as specified and as directed.
Supply and fixing in repair stainless steel shower panel, body material chrome palted stainless steel, anti finger print, movable ABS hand shower, brass spout, brass facet body with thermostat mixer, multifunction water diverter for top shower, body jets, spout 40cm stainless steel braided hose, 1.5cm stainless steel double locked flexible hoses and all necessary fittings complete all as specified.
M&L 16 to 18 mm thick Granite black (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, over 15 mm thick CM 1:4 as directed by Engr-in-charge.
M&L Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified.
Demolition of reinforced cement concrete of any discription ground to 4th floors and removing unserviceable material exc 100 mtr as specified.
M&L for Reinforced cement concrete 1:2:4 (20 mm graged aggregate) (nominal mix) as in slabs supported on walls, beams and coloumns and the like slab laid in slops all as specified and directed.
S&F mild steel deformed bars 10 mm dia and over cut to length bent to shape required including cranking hooking ends & binding with and including MS wire (annealed) not ness than 0.9 mm dia etc. all as spfd.
S&F Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified.
M&L for PCC 1:2:4 type B 1 using (20 mm graded aggregate) as in blocks for hold fasts, benching, coping apex stones, bed plates and the like including weathering slightly rounded or chamfered angles and throating all as specified and direct. Note: Form work required for these items included in the unit rate of this item.
S&F in repair Jet Spray (Stainless Steel) with 1 meter PVC Tube complete all as specified.
S&F in repair cromium plated hand shower (health faucet) with 8mm dia 1.20m long flexible tube and wall hook, complete all as specified.
S&F in repair WC Orissa pattern white with integral foot rest 580x 440 mm including L bend, & PCC bedding in 1:2:4 and making good disturbed floor connecting to trap and flush pipe compete all as specified.(Rate of including in taking out and removal of old WC seat unhygienic condition)
S&F in repair PVC connection 15 mm x 450 mm including PVC check nut at both ends screwed for iron pipe of 15 mm bore.
Dismantling/ disconnecting/ demolition of water storage tank of any type or description (RCC/PVC/Bricks etc) and removing from site or refixing in position.
Supply and fixing Rotational moulded polyethylene water storage tanks of 1000 litres capacity, (cylindrical vertical with closed top) with plastic lid cover, triple layered, white, hoisted and fixed in position all as specified in SSR Part-I including PTMT Ball valves high pressure with epoxy coated Aluminium rod & high density plastic ball complete, screwed for iron pipe or brass ferrule and fixed for 20 mm bore pipe, including making connections complete all as specified.
Supply and fixing Rotational moulded polyethylene water storage tanks of 500 litres capacity,(cylindrical vertical with closed top) with plastic lid cover, triple layered, white, hoisted and fixed in position all as specified in SSR Part-I including PTMT Ball valves high pressure with epoxy coated Aluminium rod & high density plastic ball complete, screwed for iron pipe or brass ferrule and fixed for 20 mm bore pipe, including making connections complete all as specified
S&F in repair Stop valves, (sutable for 25mm bore pipe) cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified. (ISI Marked)
S&F in repair Stop valves, (sutable for 20 mm bore pipe) cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified. (ISI Marked)
Supply and fixing in repair float valves high pressure of PTMT with epoxy coated Aluminium rod and high density plastic ball screwed for iron pipe of bore 20mm. ( including necessary fittings) (Min weight 210gm).
Taking down GI tubing of 15 mm dia and connection and incl cleaning for refixing or removel all as spfd.
Taking down GI tubing of 20 mm dia and connection and incl cleaning for refixing or removel all as spfd.
S&F 15 mm dia galvanized pipes medium grade with all fittings and fixed complete wall and ceiling or laid in floors.
S&F 20 mm dia galvanized pipes medium grade with all fittings and fixed complete to wall and ceiling or laid in floors.
Fixing only 20 mm dia tubes, any grade, to walls and ceilings or laying in floors.
S&F in repair stainless steel gratings dia 100 mm openable type incl all necessary fittings such as hinges including embeding in tiles with white cement. .
Taking down CI/PVC pipes 110 mm dia incl all fittings like bend, branch pieces, connectors, heel rest bend etc all as specified and directed.
Taking down CI/PVC pipes 75 mm dia incl all fittings like bend, branch pieces, connectors, heel rest bend etc all as specified and directed.
S&F UPVC (SWR) Type-B, pipes single socketed, 110 mm dia, in any length with rubber ring joints, laid in trenches or in floors complete all as specified.
S&F UPVC (SWR) Type-B pipes single socketed, 110 mm dia, in any length with rubber ring joints, Fix to wall complete all as specified.
S&F UPVC (SWR) Type-B pipes single socketed, 75mm dia, in any length with rubber ring joints, laid in trenches or in floors complete all as specified.
S&F UPVC (SWR) Type-B pipes single socketed, 75mm dia, in any length with rubber ring joints, fix to wall complete all as specified.
S&F UPVC (SWR) Type-B bends, 75 mm any radius complete all as specified.
S&F UPVC (SWR) Type-B bends, 110 mm any radius complete all as specified.
S&F UPVC (SWR) Type-B junction single, 75mm (Single T) equal or unequal complete all as specified.
S&F UPVC (SWR) Type-B junction single, 110 mm (Single T) equal or unequal complete all as specified.
S&F UPVC (SWR) Type-B, floor trap, (75mm diameater for outlet in mm), plain with grating including jointing with solvent cement complete all as specified.
S&F UPVC (SWR) Type-B multi floor trap with grating including jointing with solvent cement (75mm diameater for outlet in mm) complete all as specified.
S&F UPVC (SWR)Type-B gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified.
S&F UPVC (SWR) Type-B vent cowl 75 mm dia complete all as specified.
S&F UPVC (SWR) Type-B reducers 110 mm dia complete all as specified.
S&F UPVC (SWR) Type-B branch piece, 110 mmm bore, single (single Y) equal or unequal cpmplete all as specified.
S&F UPVC (SWR) Type-B branch piece, 75 mmm bore, single (single Y) equal or unequal cpmplete all as specified.
S&F UPVC (SWR) Type-B 'P’ trap 110 mm, complete all as specified.
Demolition of brick work built in cement mortar or cement lime mortar incl all quoins, arches pillars etc and removing unserviceable material exc 100 mtr as specified.
M&L Brick work with subclass 'B' bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified.
Ditto all as per item No 118 above. but as a except brick.
M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified.
Taking down cement plaster of any description on brick or stone walls or from concrete surface incl raking out joints, hacking for key, scrubbing down with water etc all as specified,and removing unserviceable material outside the premises.
M&L for rendering 15 mm thick in CM 1:6 on other than fair face of brick work/ stone wall surfaces finished even and smooth with out using extra cement all as specified.
M&L for rendering 10 mm thick in CM 1:4 on fair face of brick work/ stone wall surfaces finished even and smooth without using extra cement all as specified. ( incl all necessary scaffolding, lifting arrangement for three story building on external surfaces).
Material and labour for rendering 10 mm thick in CM (1:3) as in ceiling finished even and smooth w/o using extra cement.
M&L for repairing of concrete surfaces such as balcony, chajjas, upward or downward facias ,column, pillar, ceiling and similar items with plain cement concrete 1:2:4 type B-0 or rendering 10-15mm thick as per site requirement in CM 1:3 without using extra cement finished even and fair complete all as specified and directed.
M L for preparation of new plastered surfaces of walls, & applying two coats of oil bound distemper over two coat of wall care putty of 1 to 2 mm thick and one coat of primer complete all as specified.
M & L for preparation of new plastered/concrete surfaces of walls, (up to 4th sorey with necessary scaffolding) and applying two coat of cement based paint over one coat of primer complete all as per specified and directed by Engr-in-charge.
M & L for preparation of new wall surface, Pillars, cornices etc by booming down with steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, oil, greasy spots & rubbing with sand paper and and applying one coat of white wash on ceiling.
M & L for preparation of new wall surface Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm.
M&L for applying two coat of synthetic enamel paint over a coat of red oxide primer on new steel surfaces of any description having width/girth exceeding 10 cm including preparation and rubbing with sand paper to make surface even and smooth complete all as specified
M&L for applying two coat of synthetic enamel paint on new wooden surfaces of any description over a coat of pink primer having width/girth exceeding 10 cm complete all as specified including preparation and necessary filling by chalk putty as and where requered to make surface even and smooth.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.
M&L for machine cut kota stone slab flooring 18 to 20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete and include 15mm thick screed bed in CM 1:4. ( sample as approved & kept in GE's sample room)
M&L for Glazed digital ceramic coloured tiles in vertical surface 450x300x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the surface over and included 10 mm thick rendering CM 1:4 all as specified. ( sample as approved & kept in GE's sample room)
M&L Non - skid digital, anti scratch, anti fungus, Ceramic joint less colored tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and set in neat cement slurry and pointed with coloured/white cement to match the surface over 15mm thick screed bed.( sample as approved & kept in GE's sample room).
Ditto all as per item No 135 above but as in verical surfaces skirting over a backing coat of CM 1:4,10 mm thick complete.
M& L Virified Ceramic (double charged) any shade tiles 15 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. using 4 mm spacers set and jointed in neat cement slurry and pointed in white or coloured tile epoxy grout as per the manufacturer specifications to match over 15 mm thick screed bed in C:M 1:4 complete all as specified.
M& L Virified Ceramic (double charged) any shade tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in skirting, dado etc. using 4 mm spacers set and jointed in neat cement slurry and pointed in white or coloured tile epoxy grout as per the manufacturer specifications to match over 10 mm thick screed bed in C:M 1:4 complete all as specified.
Dismantling of ceiling board(Fibre,pulp,,any type of insulation etc) or insulation board / slabs/any thickness including cover fillets
M&L GI frame work for seamless ceiling comprising of frame channels of thickness 0.5 mm (27mm wide and having two flange of 20mm and 30mm) along perimeter of ceiling, Screw fixed to brick wall/Partition with the help of nylon sleeves and screws, at 610mm centers to center and intermediate channels 0.91 mm thickness & 45 mm wide (with two flanges of 15 mm each from the soffit at 1200 mm center to center with ceiling angle (0.5mm thick) of width 25mm x 10 mm fixed to soffit with GI cleat and steel expansion fasteners and then frame ceiling section (0.5mm thick) 80 mm wide having two flange 26 mm each at 600mm center to center including S&F single layer of 12.5 mm tapered edge Gyptone fixed to in then screw fixed to ceiling section with 25 mm Drywall screws at 230 mm centers Screw fixing is done mechanically either with screw drive or drilling machine with suitable attachment finally squared and tapered edge of the boards are to be jointed and finished so as to have a flush look which filling and finishing with jointing compound, joint paper tape.
Supply and fixing in repair GI snap grid frame work (Grid size 605cm x 605cm) for false ceiling consisting of main runner 'T' of size 24mm x 32mm and 0.3mm thick , Secondary runner 'T' of size 24mmx25mm and 0.3mm thick,GI angle 24mmx24mm and 0.4mm thick,Bottom exposed capping of width 24 mm of all T-sections shall be of 0.25mm thick PPGI, hot dipped galvanised steel with zink coating not less than 120gm / Sqm ,ceiling grid system duly suspended by 4mm dia GI wire hanging from existing purlins /roof slab with butterfly clips including Gypsum ceiling tiles of size 595 x 595 x 9 mm laminated with 0.07 mm thick polyvinyl film on the face side and 10 micron metalized polyester film on the back side fixed on GI snap grid including taking down of old us material complete all as specified and directed by Engr-in- Chage.
S&F sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm all as specified and directed by Engineer-in-charge.
Dismantling of CGI/ACC or plain or corrugated steel sheeting, any gauge, thickness, including nanital or similar pattern roof covering.
M&L Pre- painted galvatume aluminum zinc coating (AZ-150 Micron) GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.
M&L Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick ( AZ-150 Micron) of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified
M&L 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc. Fixed with L-type or J-type or cranked hook bolts complete all as specified.
M&L asbestos cement one piece plain angular ridge 6mm thick complete all as specified.
M&L Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel, gusset plates, or flat sections) including distance pieces, cleats etcFe 410 -W (GdeE- 250) qualityA complete all as specified.
M&L Mild steel screw bolt (machine made) dia 16 to 20 mm with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, but length of bolt exc 22.5cm and n exc 30cm long complete all as specified.
Dismantling timber scantlings 40 sq. cm and over in section, in any position ( framed work) complete all as specified.
S&F in repair second class hard wood timber (framed) scantling fixed , wrought, complete all as specified and as directed.
M&L for 15 mm thick plaster in cm 1:4 finished fair and even on RCC roof slab ( upto 4th storey building) incl mixing of integral water proofing compound : Note :- IWPC shall be measured and paid for separately)
Complete removal of existing water proofing treatment of any description incl under layer, taking down of cement plaster / demolition of cement concrete any thickness and removal of debris off the premises including grubbing up of trees and preparation of concrete surfaces by scrubbing down with steel brushes and cleaning with water to remove toremove all loose dirt/dust and applying roof treatment as below:- (i) Applying a coat of bitumen primer membrane 0.4ltr/sqm by the same membrane manufacturer of density at 25 degree C’ 0.87-0.89Kg/Litre and viscosity 70-160 CPS till the surface properly impregnates and insolvent oil primer evaporates completely. (ii) Applying a coat of blown 85/25 graded bitumen confirming to IS 702 @ 1.2 Kg/sqm. (iiI) Applying Polymeric Polypropylene polymer membrane “APP” (Atactic poly propylene polymer ) modified prefabricated five layer 3mm thick not less than 3.6 Kg/Sqm with 160 grams/sqm non woven polyster made at centre core reinforced laid with 75 mm side overlap and 100 overlap in length using butane torch with 10cm over laps which shall be thermo fused by flame cpmplete all as specified.
Applying two coats of aluminium paint over the APP membrane all as specified. All joints and change in direction shall be covered with cement mortar 1:3 mixed with SBR latex @ 200 ml/bag of cement and curved before laying membrane
Demolition of cement concrete (unreinforced) ground floor to 4th floors and pavings n exc 15 cm thickness (below or above ground level ) and removing unserviceable material exc 100 mtr as specified.
Material and labour for Chequered cement concrete tiles 30cm x30cm x 25mm thick, with greay cement and pigment, set, jointed and pointed in neat cement slurry in floors and laid over and including 20mm thick screed bed in CM 1:4 etc complete all as specified and as directed
Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand
M&L for Plain cement concrete (1:3:6), type C-2 (using 40 mm graded crushed stone aggregate) nominal mix, 75 mm thick, as in sub base of floors, finished even and fair complete all as specified and as directed by Engineer-in-charge.
Dismantling boarding, any description, fixed in any position with screws
S&F 5mm thick prelam colour PVC sheet in strips & channel feathered at the edges for fixing on Solid PVC Wall Lining, Insulated PVC Wall Lining, and Solid PVC Partitions incl 5 mm thick PVC sheet fillet width 35 mm inclusive of Solvent Cement and fixing at site.
M/S A TO Z ENGINEERS
M/S MANJIT SINGH AND SONS
AMRIT ENTERPRISES
M/S SINGH CONSTRUCTION AND WORKS
M/S RAJINDER GOODS TRANSPORT CARRIER
M/S Shankardass Devidass
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .