Repair renovation of Qtr No 11 block D at Channi Himmat Jammu

Amount

Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patches in proper shape raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 metres lead including all carriages and cost of material involved.(1:4) Mix (1 cement : 4 course sand).

Providing and fixing panelled or panelled and glazed shutters for doors, windows, clerestory windows, including ISI marked M S pressed butt hinges bright finished of required size with necessary screws including paneling and glazing all complete as per direction of EIC with deodar wood.(35mm thick)

Providing and fixing 35mm thick wire gauze shutters of deodar wood, using galvanized M.S wire gauze of average width for aperture 1:4mm with wire of dia 0.63mm for doors, windows and clerestory windows including ISI marked bright finished or / and black enameled M.S butt hinges with necessary screws.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade (two or more coats) over and including priming coat with cement primer. Including all carriages and cost of material involved.

Painting with ready mixed synthetic enamel paint of approved brand and manufacture to give an even shade (two or more coats)

Engagement of labour skilled/ unskilled for various dismantling works like tacking of floors, brick work, damaged tiles, etc including stacking of serviceable material as directed by EIC and disposal of unserviceable material up to 50 mtr lead.

Labour

Carpenter

Providing and fixing Ceramic glazed Floor tiles wherever required of size 1'0"x1'0" or above above in floors or as directed by EIC of approved make like NITCO, KAJARIA or equivalent etc. over 12 mm thick bed of cement mortar 1:4 and jointing with grey cement slurry including pointing in white cement mixed with pigment of matching shade complete, including all leads, lifts, costs and carriages of all materials involved.

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS:13753 of minimum thickness 5mm of approved make like NITCO. ORIENT, SOMANY, KAJARIA or equivalent make in all colour, shades except burgundy, bottle green, black of any size as approved by Engineer-in-charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3:3 Kg per Sqm including pointing in white cement mixed with pigment of matching shade complete. including carriage of material.

Providing and fixing Sanitary fittings/ fixtures of approved brand like Jaguar, Parko, Cera or equivalent. (as directed by EIC)

C P Bib cock long nose

C P Bib cock short body

C P Angle valve

C P Grating

Soap case

Wash Basin pedestal with mixture Complete

Sink complete

W. C. one piece (Western) with PVC flushing cistern and all fixtures complete.

Water tanki approved make

Sink Mixer

Providing and fixing of G I / PVC pipes with fittings (external work) complete.

G I Pipe 20mm

PVC Pipe100mm

Providing and fixing of Granite over the kitchen counter 12mm thick bed of cement mortar 1:3 and jointing with grey cement slurry complete Job including costs and carriages of all materials involved and also cost of making moulding or as directed by EIC. (Green/Black Granite).

Making cupboard using waterproof ply 19mm thick all sides and for shelves, 1 mm thick mica all fixtures and fittings complete in all respects including glazing, enameled paint etc and costs and carriages of all materials involved.

Providing / fixing powder coated aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z- sections and other sections of approved make conforming to IS :733 and IS :1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC / neoprene felt etc. aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / paneling, C. P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer in charge (including glazing and paneling)for shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of PVC / neoprene gasket required including all fittings complete.

Deepak Singh