SPECIAL REPAIR AND REPLACEMENT OF DETERIORATED LT CABLES LT PANELS DBS SUBMAIN WIRING INTERNAL WIRING LIGHTINGS AT MAIN FOYER AND DINING HALL AT WNC (O) MESS AND OTHER SANCTIONED WORK AT NOFRA AREA UNDER GE(NW) NOFRA COLABA MUMBAI

Amount

Material and Labour for Duct of suitable size, made out of 18 Guage GI Sheet in appropriate shape from blower motor to exhaust point complete all as specified and directed by Engineer - in - Charge.

Supply and Fix Canvas for connection between duct and motor extaust near exhaust point made out of heavy duty, heat resistance material complete all as specified and directed by Engineer -in - Charge.

Supply and Fix induction motor for Exhaust Blower with 1400 RMP and 7.5 HP capacity, 3 Phase, 4 Pole, Squirrel Cage, Foot Mounted complete all as specified and directed by Engineer - in - Charge.

Supply and Fix induction motor for Exhaust Blower with 1400 RMP and 5.0 HP capacity, 3 Phase, 4 Pole, Squirrel Cage, Foot Mounted complete all as specified and directed by Engineer - in - Charge.

S & F DOL Starter for TE motors upto the capacity of 7.5 HP complete all as specfied and directed by Engineer in Charge.

M & L for Addn alteration in AHU Body complete as per exisitng and all as specified and directed by Engineer - in - Charge.

Taking up/out old U/S XLPE insulated screened. PVC bedded, galvanized steel strip or wire armored, electric power cable (heavy duty) 1100 Volts grade with stranded aluminium conductor including taking up Old concrete cable cover from trenches/walls/ceiling/poles etc any size all as specified and directed.

Excavation in trenches not exc 1.5 mtr wide and not exc 1.5 mtr in depth for foundation, laying of UG Electric cable / staying of steel tubular pole etc. and getting out in soft and loose soil, complete all as specified and as directed.

M & L for Cutting existing road surface or hard standing 0.30 mtr depth using latest technology for laying of pipes/ cables and making good distrubed surface to match with existing complete with PCC all as specifed and directed by Engineer - in - Charge.

Removing the excavated material/ soil not exc 50m out of MD land complete all as specified and directed .

Returning & filling in, including spreading, levelling, watering & well ramming in layers not exc 25 cm as in soil complete all as specified & directed .

Material and labour for dry clean river sand for cushioning of cable in trenches for cable protection including spreading, leveling and hand punning complete all as specified in SSR Part-I and as directed. [Note :- Only compacted thickness of sand will be measured and paid.]

Supplying and laying un-reinforced precast concrete cable cover, class LV Type I, flat, size 250 mm x 150 mm x 40 mm. laid in trenches complete all as specified and directed.

Supply and laying in repair PVC insulated XLPE, armoured LT cable, 1100 Volts grade with aluminium conductor of size 3.5 core 35 Sqmm laid in trenches / through pipe /ducts or fixed on wall etc complete all connections to LT panel with proper size glands & lugs all as specified & directed.

Supply and laying in repair PVC insulated XLPE, armoured LT cable, 1100 Volts grade with aluminium conductor of size 3.5 core 95 Sqmm laid in trenches/through pipe /ducts or fixed on wall etc complete all connections to LT panel with proper size glands & lugs all as specified & directed.

Supply and laying in repair PVC insulated XLPE, armoured LT cable, 1100 Volts grade with aluminium conductor of size 3.5 core 185 Sqmm laid in trenches/through pipe /ducts or fixed on wall etc complete all connections to LT panel with proper size glands & lugs all as specified & directed.

Supply and laying in repair PVC insulated XLPE, armoured LT cable, 1100 Volts grade with aluminium conductor of size 3.5 core 300 Sqmm laid in trenches/through pipe /ducts or fixed on wall etc complete all connections to LT panel with proper size glands & lugs all as specified & directed.

Supply and laying XLPE cable insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) with aluminium conductor 11000 volts, earthed, grade with cross sectional area 185 Sqmm 3 core laid in trenches/through pipe /ducts or fixed on wall etc complete all connections to HT panel with proper size glands & lugs complete all as specified and directed by Engineer-in-Charge.

Dismantling carefully and shifting of Transformer 500KVA indoor type and all as directed.

Material and labour for Cable jointing kit for 11 KV (Earthed) grade cable for indoor termination heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 120 sqmm to 185 sqmm complete all as specified and directed by Engr- in- charge.

Supply, install, testing and commissioning of LT Feeder Pillar CPRI Approved mounted on angle iron frame 40x40x5 mm grouted on floor,cubical outdoor type, with both side opening Minimum size 1100x900x600 mm or suitable fixing of all breakers and controls, for 415V, 3 phase, made of 3 mm thick CRCA sheet weather, vermin proof factroy fabricated, CPRI approved, front open hinged door with locking arrangement powder coated, individual compartment for MCCBs and 800 Amps rated bus bar, top and bottom cable entry including disconnecting cable connections Panel and fixing/connecting in new insalled panel with provisions of thimble/lugs and necessary farmework and PCC foundation including shifting of existing of LT Panel if any making arrengement for fixing of panel and making good to disturbed surface as directed comprising of the following :-

(a) MCCB 400 Amps, 36 KA, FP - 02 Nos Make: Legrand Cat Part No. 4220 35 of model DPX3 630 or equivalent make as specified in list of Make.

(b) MCCB 250 Amps, 36 KA FP - 01 Nos Make: Legrand Cat Part No. 4202 49 of model DPX3 250 or equivalent make as specified in list of Make.

(c) MCCB 200 Amps, 36 KA FP - 04 Nos Make: Legrand Cat Part No. 4202 48 of model DPX3 250 or equivalent make as specified in list of Make.

(d) MCCB 160 Amps, 36 KA, FP - 03 Nos Make: Legrand Cat Part No. 4200 97 of model DPX3 160 or equivalent make as specified in list of Make.

(e) MCCB 100 Amps, 36 KA, FP - 03 Nos Make: Legrand Cat Part No. 4200 96 of model DPX3 160 or equivalent make as specified in list of Make.

(g) Aluminium bus bar 800 Amps for phase & 800 Amps for neutral complete with bus bar insulator,nuts & bolts complete.

(h) Power panel wiring between bus bar to MCCB of different capacity with PVC insulated multistranded copper cable , single core ,1100 volts grade of appropriate size complete with copper lugs.

Supply, install, testing and commissioning of LT Feeder Pillar CPRI Approved mounted on angle iron frame 40x40x5 mm grouted on floor,cubical outdoor type, with both side opening Minimum size 1100x900x600 mm or suitable fixing of all breakers and controls for 415V, 3 phase, made of 3 mm thick CRCA sheet weather, vermin proof factroy fabricated, CPRI approved, front open hinged door with locking arrangement powder coated, individual compartment for MCCBs and 800 Amps rated bus bar, top and bottom cable entry including disconnecting cable connections Panel and fixing/connecting in new insalled panel with provisions of thimble/lugs and necessary farmework and PCC foundation including shifting of existing of LT Panel if any making arrengement for fixing of panel and making good to disturbed surface as directed comprising of the following :-

(a) ON Load LT Changeover , 4 POLE, 250 Amps- 01 No.

(d) MCCB 250 Amps, 36 KA FP - 02 Nos Make: Legrand Cat Part No. 4202 49 of model DPX3 250 or equivalent make as specified in list of Make.

(e) MCCB 200 Amps, 36 KA FP - 03 Nos Make: Legrand Cat Part No. 4202 48 of model DPX3 250 or equivalent make as specified in list of Make.

(f) MCCB 160 Amps, 36 KA, FP - 03 Nos Make: Legrand Cat Part No. 4200 97 of model DPX3 160 or equivalent make as specified in list of Make.

(h) Aluminium bus bar 600 Amps for phase & 400 Amps for neutral complete with bus bar insulator,nuts & bolts complete.

(j) Power panel wiring between bus bar to MCCB of different capacity with PVC insulated multistranded copper cable , single core ,1100 volts grade of appropriate size complete with copper lugs.

Taking down old unserviceable submain cable of any size and capacity and finishing wall surfaces.

Supply and fix submain wiring in repair with two single core FRLS unsheathed 1100 volts grade cable with stranded copper conductor of size 4 Sqmm in and including PVC casing caping not less than 25mm width, ISI marked including 1 single core cable with stranded copper conductor of size 4 sqmm (green colour) for earthing. [Note :- (i) Two runs of 4Sqmm cable, 1 run of PVC casing & caping and 1 run of 4 Sqmm cable shall be measured as 1 RM. (ii) Each submain wiring shall run in seperate PVC casing caping]

Supply and fix in repair submain wiring two single core 6 Sqmm for sub main witing with copper conductor multistranded PVC insulated and unsheathed 1100Volts grade in and including PVC casing capping / conduit not less than 25mm dia with fixing accessories including one run of 6.0 Sqmm copper conductor. [Note :- (i) Two runs of 06 Sqmm cable, one run of 6.0 Sqmm earth cable and one run of PVC casing Capping /conduit shall be measured as one running meter. (ii) Each submain wiring shall run in seperate PVC casing caping/conduit.]

Supply and fix submain wiring in repair 2 single core FRLS unsheathed 1100 volts grade cable with stranded copper conductor of size 10 Sqmm in and including PVC casing caping / conduit not less than 25mm dia including 1 single core cable with stranded copper conductor of size 10 sqmm (green colour) for earthing. [Note :- (i) Two runs of 10 Sqmm cable, 1 run of PVC casing caping/ conduit and 1 run of 10 Sqmm cable shall be measured as 1 RM. (ii) Each submain wiring shall run in seperate PVC casing caping / conduit.]

Supply and fix sheet metal enclosure 12 way Double door type having protection IP-54, with 200 Amps rated bus bar connecting with existing wiring circuits by providing copper pin terminals of suitable size complete all as directed of comprising of the following :- (a) MCB SPN 63 Amps, 240 Volts - 01 No. (b) MCB SP 6-32 Amps, 240 Volts -10No.

Supply and fix in repair MCB, DB, SPN 8 way double door with protection type IP-54 with 200 Amps rated bus bar connecting with existing wiring circuits by providing copper pin terminals of suitable size complete all as directed, as approved comprising following :- (a) MCB SPN 40 Amps 240 Volts-01 No (C Series). (b) MCB SP 6- 32 Amps 240 Volts-06No (C Series).

Supply and fix single phase sheet metal powder coated double door distribution board 4 way comprising with following :- (a) MCB SPN 40Amps 240Volts, 10KA - 1 No ('B' Series) (b) MCB SP 6 - 32Amps 240Volts - 02No ('B' Series).

Supply and fix in repairs sheet metal enclosure 2 way without bus bar with MCB comprising following. (a) Isolator DP 63 Amps Breaking capacity 10 KA.-12No (C series).

Supply & fix in repair MCB DB, TPN 8 way vertical type, 415 V with 200 Amps rated bus bar and double door connecting with existing wiring circuits by providing copper pin terminals of suitable size complete all as directed, comprising of the following : - (a) MCCB 3 Pole, 415 V fixed type, 160 Amps with breaking capacity 25 KA-01 Nos (incoming). (b) MCB TP 63 Amps, 10KA - 06 Nos (C Series) (Outgoing). (c) MCB SP 40 Amps, 10KA - 06 Nos (C Series) (Outgoing).

Taking down carefully aluminium point wiring (light, fan, socket or power) complete, (fittings such as switches, ceiling roses, pendants, regulators sockets etc to be measured separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified.

Material and Labour for point wiring complete with 1.5 sqmm single core multistranded FRLS PVC insulated unsheathed copper conductors 1100 volts grade drawn through and including PVC non-metallic casing and caping of size not less than 25mm width, ISI marked with accessories fixed on wall/ceiling/truss etc with PVC non metallic ISI marked terminal boxes/ modular Cover plate concealed in wall including one FRLS PVC insulated & sheathed multistranded green colour copper conductor 1.5 sqmm as earth continuity conductor connected to common earth as earth dolly for :-

(a) One light point controlled by one switch SP one way.

(b) One ceiling fan point controlled with one 5A switch

(c) One exhaust fan point controlled with one 5A switch

(d) One 3 pin socket outlet 5Amps on independant board.

(e) One 3 pin socket outlet 5Amps on same board with other switches.

(f) One bell point controlled by one bell push 5 Amps.

Material and Labour for point wiring complete with 4 sqmm single core multistranded FRLS PVC insulated unsheathed copper conductors 1100 volts grade drawn through and including PVC non-metallic casing and caping of size not less than 25mm width, ISI marked with accessories fixed on wall/ceiling/truss etc with PVC non metallic ISI marked terminal boxes / modular Cover plate concealed in wall including one FRLS PVC insulated & unsheathed multistranded green colour copper conductor 4 sqmm as earth continuity conductor connected to common earth as earth dolly.

Supply and fix in repair Modular Switch, 6Amp, One way, 1 module.

Supply and fix in repair Modular blank plate, One way, 1 module.

Supply and fix in repair Modular Switch, 16Amp, One way, 1 module.

Supply and fix in repair Modular type bell push , 6Amp, 1 module.

Supply and fix in repair Bell electric AC 230Volt single pole musical type with ISI mark.

Supply and fix in repair Modular type, electronic fan regulator (5 step), 450 Watts, 230 volts, 2 module.

Supply and fix in repair ceiling rose surface bakelite with ISI mark, flush type with ISI mark three terminals complete all as specified.

Supply and fix in repair Modular Socket oulet, 6 Amps, 2/3 pin combined, 2 module.

Supply and fix in repair Modular Socket oulet, 6/16 Amps, 2/3 pin combined, 2 module.

M & L required for filling wall cavity & cutting chases in cement mortar 1:3 not exc 10 cm in girth to ends or edges including taking down existing metal or wooden sinking box & making good to wall surface for concealed modular metal flush box or concealed conduit wiring, etc.

Supply and fix in repair Modular white cover plate with Frame 1 Module.

Supply and fix in repair Modular white cover plate with Frame 2 Module.

Supply and fix in repair Modular white cover plate with Frame 3 Module.

Supply and fix in repair Modular white cover plate with Frame 4 Module.

Supply and fix in repair Modular white cover plate with Frame 6 Module.

Supply and fix in repair Modular white cover plate with Frame 8 Module.

Supply and fix in repair Modular white cover plate with Frame 12 Module.

Supply and fix in repair Modular metal flush box 1 module.

Supply and fix in repair Modular metal flush box 2 module.

Supply and fix in repair Modular metal flush box 3 module.

Supply and fix in repair Modular metal flush box 4 module.

Supply and fix in repair Modular metal flush box 6 module.

Supply and fix in repair Modular metal flush box 8 module.

Supply and fix in repair Modular metal flush box 12 module.

Supply and fix in repair Linear Aluminium Baten LED T/L 20W Aluminium Extruded Chanel Powder Coated with opaque diffuser for glare free light complete with accessories internally prewired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified.

Supply and fix in repair Linear Aluminium Baten LED T/L 10W Aluminium Extruded Chanel Powder Coated with opaque diffuser for glare free light complete with accessories internally prewired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified.

Supply and fix in repair LED lamp suitable for 14 watts, 240 volts, single phase, 50 Hzs, Lumen 1450 AC supply.

Material and Labour in repair for Lamp holder, PVC /Polycarbonate type with cord grip cap suitable for pendant fittings complete all as directed by Engineer-in-Charge.

Supply and fix in repair Plug and Socket enclosure, in sheet metal enclosure with MCB, SP 20 Amps 240 Volts complete with metal clad socket for window type air conditioners.

Supply and fixing Recess Mounting LED panel, 2'x2', 28 Watt capacity, environmentlal friendly, new generation, ashthetically designed ultra modern, fully diffused, white powder coated, with polymer diffuser complete with acessories suitable for Armstrong/Grid Ceiling all as specified and directed . Make- CAT Part No. PLUTONEO2x2PLR28WLED840S of Havells or equivalent make as specified in list of Make.

Supply and fixing Recess Mounting LED panel, 2'x2', 34 Watt capacity, environmentlal friendly, new generation, ashthetically designed ultra modern, fully diffused, white powder coated, with polymer diffuser complete with acessories suitable for Armstrong/Grid Ceiling all as specified and directed . CAT Part No. PLUTONEO2x2PLR34WLED857S of Havells or equivalent make as specified in list of Make.

Supply and fixing Surface Mounting LED panel, 4'x1', 42 Watt capacity, environmentlal friendly, new generation, ashthetically designed ultra modern, fully diffused, white powder coated, with polymer diffuser complete with acessories suitable for surface all as specified and directed . Make- CAT Part No. PLUTOSURFACE4x1PLS42WLED857S of Havells or equivalent make as specified in list of Make.

Supply and fixing Recess Mounting LED panel, 4'x1', 36 Watt capacity, environmentlal friendly, new generation, ashthetically designed ultra modern, fully diffused, white powder coated, with polymer diffuser complete with acessories suitable for Armstrong/Grid Ceiling all as specified and directed .Make- CAT Part No. PLUTONEO4x1PLR36WLED840S of Havells or equivalent make as specified in list of Make.

Supply and fixing Recess Mounting LED down lighter with pressure die cast aluminium heat sink and PC diffuser 24 Watt capacity, environmentlal friendly, new generation, ashthetically designed ultra modern, fully diffused, white powder coated complete with integrated driver incl all acessories suitable for Armstrong/Grid Ceiling all as specified and directed .Make- CAT Part No. INTEGRANEODLR 24W LED 830/840S of Havells or equivalent make as specified in list of Make.

Supply and fixing Recess Mounting LED drop down lighter 100lm/watt, with pressure die cast optimised heat sink 25 Watt capacity, round profile, environmentlal friendly, new generation, ashthetically designed ultra modern, fully diffused, white powder coated complete with sepeartd driver incl all acessories suitable for Armstrong/Grid Ceiling all as specified and directed .Make- CAT Part No. ENDURAHODLR 25W LED 830/840S of Havells or equivalent make as specified in list of Make.

Supply and fixing hydroblast Marine 5050 LED Deck Lightining Beveled Downward pitch technology, Black casing,warm white colour LED compatible with Hydoblast controllers with necessary arrangement for connecting the lights including terminal/junction boxes, ceiling roses for connection of lights complete all as specified and directed by Engineer-in-charge.

M&L for Earthing with galvanised steel earth plate electrode 60 x 60 cm x 6 mm thick, burried directely in ground (earth pit not less than 2.5 mtr deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to galvanised iron strip 32 x 6 mm with the help of bolts, nuts, check nuts and washers of galvanised iron or steel, including necessary excavation, PCC 1:3:6 type D2 and PCC cover 1:2:4 type B1 weatering arrangement with GI pipe funnel, jali, complete all as specified and shown in electrical plate No.3 including connection to the earthing test point and testing on completion.

Material and Labour for point wiring complete with 2.5 sqmm single core multistranded FRLS PVC insulated unsheathed copper conductors 1100 volts grade drawn through and including PVC non-metallic conduit size not less than 25mm width, ISI marked with accessories fixed on wall/ceiling/truss etc with PVC non metallic ISI marked terminal boxes / modular Cover plate concealed in wall including one FRLS PVC insulated & unsheathed multistranded green colour copper conductor 4 sqmm as earth continuity conductor connected to common earth as earth dolly.

Taking down Ceiling / Exhaust/Wall Mounted fan of any size, sealing cable end, dismantling blades carefully and removing fan and blades to MES E/M Store for safe custody and refixing after painting and minor servicing all as directed by Engr-in- charge.

Supply and fixing LED lights fitting 1x 18W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

Taking down MCB DB of any type, single phase including disconnection of all circuits complete with MCBs etc.

Taking down cement plaster or cement lime plaster of any description on brick or stone walls etc incl raking out joints hacking for key scrubbing down with water etc complete all as specified.

M&L for Rendering 15 mm thick cement plaster in cement mortar 1:6 on fair faces of brick work or concrete surfaces complete all as specified and directed.

M&L for Rendering 10 mm thick cement plaster in cement mortar 1:4 on fair faces of brick work or concrete surfaces complete all as specified and directed.

M&L for Preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of priming paints plaster all as specified.

M&L for Preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of priming paints plaster all as specified.

M&L for Preparation of old plastered surfaces of walls and applying one coat of cement base paint on walls complete all as specified.

Dismantling floor hearth or wall tiling including cement mortar bedding removing serviceble tiles to store and rubbish off the permises.

M & L for Non-Skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.06sqm but not exceeding 0.11 sqm over & including 15mm thick Screed bed or bedding layer in CM 1:6 for laying floor finishes, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed by the Engineer-in-Charge.

M&L for Glazed white ceramic tiles of size 300x200x 6 to 7mm laid on vertical surface such as dado/skirting over cement mortar backing coat, set jointed in neat cement slurry and pointed in white or coloured cement including 10mm thick bedding layer in CM 1:4, complete all as specified and as directed.

Dismantling of plain or corrugated steel sheeting ,of any gauge ,thickness , including Nainital or similar pattern roof coverings all as specified.

Dismantling structural steel work including doors , gates but excluding framed truss etc. complete all as specified.

S&F curvature type pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/clading to wall, fixed with self tapping screws as per existing shed profile complete all as specified.

S&F MS framed work as in door and gates of angle or other section with gusset plates, rails , braces etc indluding drilling, welding complete all as directed by Engineer-in-Charge.

Demolition of brick work or stone/boulder masonry build in cement mortar including all quions/archers etc completed all as specified and directed.

M&L for Brickwork with subclass `B' bricks, straight or curved on plan exc 6m mean radius, built in CM(1:4) all as specified and directed by Engr-in-Charge.

S&F vitrous china squatting pan 'Orrisa Pattern' size 580x440mm white with integral foot rest including connecting and necessary provision of lime concret complete all as specified and directed by Engr-in-Charge.

S&F in repair wash hand basin vitreous china white flat back or angle type of size 580mmx450mm including waste chain and plug and porcelain stopper, waste pipe, a pair of brackets or errecting stand etc. complete all as specified and directed.

Disconnecting existing tanks of capacity exc. 500 litres and not exc. 1000litres , setting aside ( or lowering if required ) for repairs , cleaning , etc. and hoisting if required reconnecting and refixing in position complete all as specified.

S &F Rotational moulded polyethylene water storage tanks 1000 litres capacity ( cylindrical vertical with closed top ) hoisted and fixed in position all as specified in SSR Part I and as directed by Engr In Charge.

Supply, installation, commissioning,Hi wall split inverter air conditioner electric driven single phase comprising indoor and out door units of capacity 1.5 TR complete with cordless remote control unit rating of ISEER-5 & above. Compressor type, rotary, refrigerant including copper pipes with insulation, copper armoured cables for connection of indoor and out door unit upto 6 mtrs length and PVC drain pipe of size 15mm upto 6 mtrs complete all as specified and as directed. [Note :- Copper pipe with insulation upto 6 mtr including cable for connections and drain pipe upto 10 mtr are inclusive of rate quoted.]

S&F DB 04 way Double door SPN type having protection IP-42, with 200 Amps rated bus bar connecting with existing wiring circuits by providing copper pin terminals of suitable size complete all as directed.

S & F MCB SPN 32 Amps, 10 KA ratingcomplete all as specified and directed.

S & F MCB SP 06-32 Amps, 10 KA rating complete all as specified and directed.

S&F Plug and Socket enclosure, in sheet metal enclosure with MCB, SP 20 Amps 240 Volts complete with metal clad socket for window type air conditioners

Supply and fix copper tubing for suction line and for liquid discharge line duly insulated with suitable insulation material including maiking hole in wall for passing through and making good disturbed surface complete.

S&F PVC drain pipe with necessary saddles of 25mm size to be used outlet drain complete all as specified and directed

ORIENT ELECTRIC CO

SHRI SAI ENTERPRISES

S S ENTERPRISES

H R Enterprises