CERTAIN REPAIRS AND IMPROVEMENT OFFRS MD ACCN AT KMC UNDER GE (N) SANTACRUZ

Amount

Taking down chowkats or frames with shutter (without taking off shutter from frame) not exceeding 1.5 sqm each including fittings and removing clear off site after credit for the same is recovered by the dept complete all as specified and as directed .

Taking down chowkats or frames with shutter (without taking off shutter from frame) exceeding 1.5 sqm but not exceeding 4 sqm each including fittings and removing clear off site after credit for the same is recovered by the dept complete all as specified and as directed .

Taking down shutter carefully, area exceeding 1.0 sqm but not exceeding 2.0 sqm each including fittings and removing clear off site after credit for the same is recovered by the dept complete all as specified and as directed .

Supply and fix solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with 19mm x 19mm MS square tube EPDM rubber gasket weather seal to be provided through the frame, the profile shall be mitre cut at two corners and jointed by inserted 2mm of 150mm long bracket of 15mm x 15mm MS square tube inside the 19mm x 19mm MS square tube and suitable screwed the door frame shall be fixed to the wall using PVC fasteners. A minimum of 6 Nos screws to be provided for each frame as per specification & drawing on Serial Page No 180 of SSR Part II (pertaining to item No 08095) all as specified and as directed by Engineer-in-Charge. Note: The quoted rates are deemed to be included for cutting holes, providing concrete for hold fast and making good to the disturbed surfaces. Make: M/S Rajshri Plastiwood, Indore/M/S Sintex Industries Ltd/M/S TUFFFLON/M/S Dura Plast Extrusion

Supply and fix factory made solid panel PVC door shutter 30mm thick (style) consisting of frame, made out of M. S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC `C` channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, fixing in the frame at site as per specification & drawing on Serial Page No 176 of SSR Part II (pertaining to item No 08080) complete all as specified and as directed by Engineer-in-Charge. Make: M/S Rajshri Plastiwood, Indore/M/S Sintex Industries Ltd/M/S TUFFFLON/M/S Dura Plast Extrusion

Supply and fix plain solid, straight chowkats, second class hardwood, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints including making good frame in cement concrete complete all as specified and as directed by Engineer-in-Charge.

Supply and fix mild steel work as in hold fast & similar small articles, conforming to Fe-290 Gde-E-165 complete all as specified and as directed by Engineer-in-Charge.

Material and labour for plain cement concrete 1:3:6 type C-1 (using 20mm graded stone aggregate) as in bed plates, concrete block for hold fast etc including necessary form work for fair finished surfaces complete all as specified and as directed by Engineer-in-Charge.

Supply & Fix Factory made single extruded WPC (wood polymer composite) soild door/window/ceosetory windows & other frames/chowkhat of size 65 x 100mm comprising of virgin PVC polymer of K value 58-60 (suspension grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with minter joints after applying PVC solvent cement and screwed with full body threaded star headed ss screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N(face) and 1100 N(edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 n/mm2 and resisitance to spread of flame of class A catgory with properrty of being termite/borer proof water/moisture proof and fire resistant and fixed in position with MS hold fast/lugs/ SS dash fastners of required dia and length complete all as specified as directed by Engineer-in-charge. Note: 1: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. 2. M/S hold fast or SS dash fastners shall be paid for seprately. Make: Rajashri/Giza/Echon/Floresta

Supply & Fix Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. Make: Rajashri/Giza/Echon/Floresta

Supply and fix stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and as directed by Engineer-in-Charge

Supply and fix extruded brass handles, fabricated type, polished, of size 100 mm long complete all as specified and as directed by Engineer-in-Charge. Make : Classic/ Shalimar/ CLIF/ARGET

Supply and fix extruded aluminium alloy handles fabricated types, anodised, of size 150 mm long complete all as specified and as directed by Engineer-in-Charge. Make : Classic/ Shalimar/ CLIF/ARGET

Supply and fix stainless steel butt hinges, medium weight, 100mm size all as specified and directed. Make : Classic/ Shalimar/ CLIF/ARGET

Supply and fix brass barrel tower bolts, with barrel of extruded section and rolled or cast bolts of size 100mm complete all as specified and as directed by Engineer-in-Charge. Make : Classic/ Shalimar/ CLIF/ARGET

Supply and fix aluminium anodised barrel tower bolt of extruded section size 150mm complete all as specified and as directed by Engineer-in-Charge. Make : Classic/ Shalimar/ CLIF/ARGET

Supply and fix brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed of size 300mm, ISI marked complete all as specified and as directed by Engineer-in-Charge. Make : Classic/ Shalimar/ CLIF/ARGET

Supply and fix aluminum anodized sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy of size 300mm, ISI marked complete all as specified and as directed by Engineer-in-Charge. Make : Classic/ Shalimar/ CLIF/ARGET

Supply and fix powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc, aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge. Make : Hindalco/Indal (Indian Al Coy)/Jindal/Associated Profile & Aluminium Ltd/Ajit India Note: (i) Glass panes /wire mesh will be measured & paid separately. (ii) Rubber beading will not be weighed.

Supply and fix Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc, aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge. Make : Hindalco/Indal (Indian Al Coy)/Jindal/Associated Profile & Aluminium Ltd/Ajit India Note: (i) Glass panes /wire mesh will be measured & paid separately. (ii) Rubber beading will not be weighed.

Supply and fix 4.0mm thick sheet glass, ordinary quality, in square exceeding 0.5 Sqm in each pane, fixed in aluminium windows complete all as specified and as directed by Engineer-in-Charge. Make : Modiguard/Atul/Kohinoor/Swastik/Saint Gobain

Supply and fix aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and as directed by Engineer-in-Charge

Supply and fix anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/ pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in- charge. Make: DECOGRILLE of Associated group / Royal Alum grill Pvt Ltd or equivalent make as approved by GE

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish out side MD land complete all as specified and as directed by Engineer-in-Charge.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15cm thickness (below or above ground level) including tiles and removal of debris outside MD land complete all as specified and as directed by Engineer-in-Charge.

Material and labour for 75mm thick Plain Cement Concrete 1:4:8 type D2, using 40mm graded stone aggregate as in sub base of flooring/ hard standing/path and finished even and fair without using extra cement etc complete all as specified and as directed by Engineer-in-Charge

Material and labour for 75mm thick cement concrete (1:3:6) type C1, using 20mm graded stone aggregate as in plinth protection and finishing the surfaces even and smooth without using extra cement, including joints of plinth protection filled with bitumen mastic (1:3) complete all as specified and as directed by Engineer-in-Charge.

Material and labour for non skid coloured ceramic tiles, 7 to 8mm thick (square/rectangular), area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc., set and jointed in neat cement slurry and pointed in coloured cement to match over and including screed bed of 20mm thick in Cement Mortar (1:4) complete all as specified and as directed by Engineer-in-Charge. Make: H R Johnson / Orient Bell Tiles / Kajaria / Somany Tiles Ltd / Nitco tiles / Swastik Tiles / RAK tiles/ Orient bell

Material and labour for light shade, vitrified tiles, 10mm thick (minimum), (square/ rectangular) polished, area of each tile not exceeding 0.36 sqm, in floors etc., set and jointed in neat cement slurry and pointed in coloured cement to match over and including screed bed of 20mm thick in cement mortar 1:4 including scarifying the floor complete all as specified and as directed by Engineer-in-Charge. Make: M/s H R Johnson / M/s Kajaria / M/s Somany Tiles Ltd / M/s Orient bell / M/s RAK tiles

Material and labour for light shade, vitrified tiles, 10mm thick (minimum), (square/ rectangular) polished, area of each tile not exceeding 0.36 sqm, on vertical surfaces etc, set and jointed in neat cement slurry and pointed in coloured cement to match including 15mm thick backing coat in cement mortar 1:4 complete all as specified and as directed by Engineer-in-Charge. Make: M/s H R Johnson / M/s Kajaria / M/s Somany Tiles Ltd / M/s Orient bell / M/s RAK tiles/ Orient bell

Material and labour for glazed coloured ceramic tiles, 1st quality of size 350 x 250 x 7 mm thick or 450 x 350 x 7mm thick (or nearest size) on vertical surface such as skirting, dado, riser/steps etc, set and jointed in neat cement slurry and pointed in colour cement to match including 10mm thick backing coat in Cement Mortar (1:4) etc complete all as specified and as directed by Engineer-in-Charge Make:M/s H R Johnson/M/s Orient Bell Tiles/M/s Kajaria/M/s Somany Tiles Ltd/M/s Nitco tiles/M/s Swastik Tiles / RAK tiles/ Orient bell

Supply and fix mild steel tubing medium grade 15mm, galvanized iron with all fittings such as Tees, elbows, sockets, bends, unions, short pieces, nipples, brass nuts and diminishing pieces complete all as per IS 1239 including fixed to wall / ceiling or laid in floor with suitable size GI clamps including cutting chases in brick walls pinning in if required and making good disturbed surfaces using with cement mortar 1:3 as per existing surfaces including taking down of old GI tubing with fittings complete all as specified and as directed by Engineer-in-Charge. Make: Tata / Jindal / Surya Prakash / Zenith

Supply and fix mild steel tubing medium grade 20mm, galvanized iron with all fittings such as Tees, elbows, sockets, bends, unions, short pieces, nipples, brass nuts and diminishing pieces complete all as per IS 1239 including fixed to wall / ceiling or laid in floor with suitable size GI clamps including cutting chases in brick walls pinning in if required and making good disturbed surfaces using with cement mortar 1:3 as per existing surfaces including taking down of old GI tubing with fittings complete all as specified and as directed by Engineer-in-Charge. Make: Tata / Jindal / Surya Prakash / Zenith

Supply and fix mild steel tubing medium grade 25mm, galvanized iron with all fittings such as Tees, elbows, sockets, bends, unions, short pieces, nipples, brass nuts and diminishing pieces complete all as per IS 1239 including fixed to wall / ceiling or laid in floor with suitable size GI clamps including cutting chases in brick walls pinning in if required and making good disturbed surfaces using with cement mortar 1:3 as per existing surfaces including taking down of old GI tubing with fittings complete all as specified and as directed by Engineer-in-Charge. Make: Tata / Jindal / Surya Prakash / Zenith

Dismantling of 110 mm dia cast iron / PVC pipe including bends/branch pipe jointed in cement mortar and taking out if required complete all as specified and as directed by Engineer-in-Charge

Dismantling of 75 mm dia cast iron / PVC pipe including bends/branch pipe jointed in cement mortar and taking out if required complete all as specified and as directed by Engineer-in-Charge

Supply and fix PVC (SWR), type B, single socketed rain water/soil waste/vent pipes with rubber ring joints, 110mm dia, fixed to walls complete all as specified and as directed by Engineer-in-Charge.. Make: Prince / Supreme / Finolex

Supply and fix PVC (SWR), type B, single socketed rain water/soil waste/vent pipes with rubber ring joints, 75mm dia, fixed to walls complete all as specified and as directed by Engineer-in-Charge.. Make: Prince / Supreme / Finolex

Supply and fix PVC (SWR) bends any radius, 110mm dia. complete all as specified and as directed by Engineer-in-Charge Make : Prince / Supreme / Finolex

Supply and fix PVC (SWR) bends any radius, 75mm dia. complete all as specified and as directed by Engineer-in-Charge Make : Prince / Supreme / Finolex

Supply and fix PVC (SWR) vent cowl 110 mm dia complete all as specified and as directed by Engineer-in-Charge. Make : Prince / Supreme / Finolex

Supply and fix PVC (SWR) vent cowl 75 mm dia complete all as specified and as directed by Engineer-in-Charge Make : Prince / Supreme / Finolex

Supply and fix 32mm dia low density polyethylene pipes (LDPE) of pressure rating @ 6 kgf/ cm2 fixed to wall complete all as specified and as directed by Engineer-in-Charge. Make: Finolex/Prince/Supreme/Astral

Supply and fix in repairs UPVC (SWR) floor trap outlet dia 75mm, plain with gratings including jointing etc complete all as specified and as directed by Engineer-in-Charge. Make : Prince / Finolex / Supreme/Astral

Supply and fix in repairs 15mm bore bib taps, fancy type, chromium plated, cast copper alloy, with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule all as specified and as directed by Engineer-in-Charge. Make : Jaquar/ Marc/ CERA/ Kohler/ Player

Supply and fix in repairs concealed stop valve, cast copper alloy, fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipes or for unions of 15mm bore complete all as specified and directed by Engineer-in-Charge Make : Jaquar/ Marc/ CERA/ Kohler/ Player

Supply and fix in repairs pillar taps fancy type cast copper alloy with capstan head, chromium plated, screwed down high pressure, with or without lettered ‘hot’ or ‘cold’ with long screwed shanks and fly nuts, screwed for iron pipes, 15mm bore complete all as specified and directed by Engineer-in-Charge. Make : Jaquar/ Marc/ CERA/ Kohler/ Player

Supply and fix in repairs tubular towel rail aluminium anodised 20mm dia, 'D' type, 60cm long between flanges fixed to walls with screws complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repair Swivel Shower of PTMT any colour for fixing with 15 mm pipe (Minimum weight 40gms) complete all as specified and as directed by Engineer-in-Charge. Make : Prayag / R.S. Industries (POLYTUF)

Supply and fix in repairs vitreous china wash down, white, water closet pan (pedestal pattern) with 'P' of 'S' trap (of size 465mm x 355mm x 265mm),including plastic seat cover to match with colour of WC, closed pattern with flat bottom & cover and chromium plated mild steel or aluminium anodized hinging device including connecting to trap and flushing pipe, anti-syphonage pipe etc complete all as specified and directed by Engineer-in-Charge. Make : Cera/Hindustan/Parryware/Jaguar/Hindware/Johnson

Supply and fix in repair vitreous china squatting pan Orissa pattern of size 580 x 440mm white with integral foot rest, 'P' or 'S' trap front and back inlet and including connection to trap and to flushing pipe, anti syphonage pipe etc (excluding flushing cistern & flush pipe) all as specified and as directed by Engineer-in-Charge. Make : Cera/Hindustan/Parryware/Jaguar/Hindware/Johnson

Supply and fix in repairs PVC valveless, syphonic action type low level flushing cistern 10 ltr capacity white with inlet ball valve, float and handle including brackets, flush pipe of polyethylene of low or high density or PVC 32mm dia including connection to pipe and fixing of chains and pull or lever complete all as specified and as directed. Make : M/S Johnson Peddar/ Parryware/ RAK Ceramics/ CERA

Supply and fix flush pipe of polyethylene of low or high density or PVC 32 mm dia, for low level cistern complete all as specified and as directed by Engineer-in-Charge. Make: Finolex/Prince/Kisan/Supreme/SFMC

Supply and fix in repairs CI nahani trap 75mm with grating including jointing with waste pipe, fixed in cement concrete 1:2:4 type B1, Complete all as specified and as directed by Engineer-in-Charge. Make : NECO/Sighal iron Foundry/Bengal iron Co/Dhatu Udyog/Kapilansh

Supply & Fix in repairs salt glazed stoneware gully traps, square/rounded mouthed type ' P 'of size 150 x 150mm including CI grating and setting in PCC 1:2:4 type B1 and jointing to drain with CM (1:1) complete all as specified and as directed by Engr-in-Charge

Supply and fix in repair PTMT grating doom over Nahani trap and floor trap of 100mm Dia with waste hole (Minimum weight 25gms) complete all as specified and directed by Engineer-in-Charge. Make : Jaypee/ GMP/ Neta/ Zolota/ Prayag Polymer/ Symet

Supply and fix in repair PVC connection, 15 mm size 450 mm long both end socket fix complete all as specified and as directed by Engineer-in-Charge. Make : Jaypee/GMP/Neta/Zoloto/Prayag/Symet

Supply and fix in repairs vitreous china wash hand basin white flat back size 550 x 400 mm excluding taps, waste chain and plug and porcelain stopper but including CI brackets, cutting for and pinning in ends of brackets or erecting stand including 32mm bore discharge pipe with waste coupling of PTMT etc complete all as specified and as directed by Engineer-in-Charge. Make : CERA/ RAK Ceramics/ Parryware/ Hindware/ Neyveli Ceramics (Neycer)/ Jaquar/ Kajaria (KEROVIT)

Supply and fix in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar to dwarf wall or including fixing cantilever CI brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm including necessary fittings such 40mm coupling waste pipe etc complete all as specified and as directed by Engineer-in-Charge. Make : Prayag/ Nirali/ Bluestar (Silver Shine)

Supply only 32mm, waste fittings, brass chromium plated for glazed ware sink, basins, etc. with long screw shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed by Engineer-in-Charge.

Supply and fix in repairs rotational molded polyethylene water storage tanks 1000 litres capacity with inlet connections, three layer (cylindrical or vertical with closed top) HDPE with ISI marked, hoisted and fixed in position either inside or out side of the building, including fixing accessories and connecting up pipes securing access covers etc complete all as specified and directed by Engineer-in-Charge Make : Sintex / Polycon, Jaipur / Rotex / Infra

Supply and fix in repairs gun metal gate valve, 25mm bore, with iron wheel head, screwed both ends for iron pipes, ISI marked and fixed with suitable size of new union complete all as specified and as directed by Engineer-in-Charge. Make : Leader/Zoloto/Seiko/Sant/GEM

Supply and fix in repairs Ball Valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed of 25mm bore complete all as specified and as directed by Engineer-in-Charge (Minimum weight - 142 gms) Make- Jaypee /GMP / Neta/ Zolota/Prayag Polymer/ Symet

Supply and fix Nipple suitable for HDPE water tank (minimum weight 25mm - 65 gms) 25mm bore dia complete all as specified and directed by Engineer-in-Charge.

Supply and fix 18mm thick prelaminated PVC Ply prelaminated one side with decorative choice lamination and other side plain fixed with screw to PVC celuka ply works all as specified and as directed. Make Rajashri plastiwood, Sintex or equivalent aproved by GE.

Supply and fix 18mm thick PVC plain celuka Ply of any color fix with screw all works all as specified and as directed by Engineer-in-Charge. Make Rajashri plastiwood, Sintex or equivalent aproved by GE.

Supply and fix 12mm thick PVC plain celuka Ply of any color fix with screw all works all as specified and as directed by Engineer-in-Charge. Make Rajashri plastiwood, Sintex or equivalent aproved by GE.

Supply and fix Ball catcher with 8mm dia steel ball and brass body and striking plate including letting in and fixed all as specified and as directed by Engineer-in-Charge.

Supply and fix in repair, corner glass shelf 300mm Cat No- BEA-44 all as specified and as directed by Engineer-in-Charge. Make-Prayag or equivalent as approved by GE

Supply and fix in repair, glass shelf 300mm (with ABS Brackets) Cat No- BEA-49 all as specified and as directed by Engineer-in-Charge. Make-Prayag or equivalent as approved by GE

Supply and fix brass handles, cast type, polished bright, of size 100 mm long complete all as specified and as directed by Engineer-in-Charge. Make : Classic/ Shalimar/ CLIF/ARGET

Supply and fix brass handles, cast type, polished bright, of size 75 mm long complete all as specified and as directed by Engineer-in-Charge. Make : Classic/ Shalimar/ CLIF/ARGET

Supply and fix in repair, Wall mixer with provision for overhead shower with 115mm long bend pipe on upper side, connecting legs & wall flanges all as specified and as directed by Engineer-in-Charge. Make : Jaguar catlogue No. FLR-CHR-5273UPR or equivalent

Supply and fix in repair, health faucet (body cleaner) with 1.0m tube and hook (PVC tube), white/Ivory Cat No- BEA-84 all as specified and as directed by Engineer-in-Charge. Make-Prayag or equivalent as approved by GE

Supply and fix in repairs cabinet mirror 400 x 500mm, PVC, 2mm thick complete all as specified and as directed by Engineer-in-Charge Make- Prayag/Cera

Dismantling wrought iron or mild steel work of any description not otherwise provided for & removing clear off site complete all as specified and as directed by Engineer-in-Charge.

Material and labour for MS framed work such as grills , gratings, etc with ends of bars shouldered and /or riveted or forged into spikes, framed guard bars, framed work of garbage bin, barred iron doors, ladders, framed balusters, walk ways, railings, framework of watertanks and similar work conforming to FE 290 Gde 165 etc. complete all as specified and as directed by Engineer-in-Charge.

Dismantling Asbestos cement (corrugated, semi corrugated, etc.) sheets in roof coverings including ridges & removing clear off site complete all as specified and as directed by Engineer-in-Charge.

Supply and fix Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick as per approved profile of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws or L type or J type or cranked hook bolts or as per manufacture instruction complete all as specified and as directed by Engineer-in-Charge Note- Work to be carried out for height upto 15 mt and above/ factory type bldg/Hanger) Make: JINDAL / INDALCO / HINDALCO / ASSOCIATED Profiles and Aluminium Ltd / ESSAR colour coated sheets/TATA

Material and labour for rolled mild steel sections as in roof trusses (framed), trussed, purlins, crane gantries, rails, and fastenings and heavy bracket framing, (beam, tee, angle, channels or flat sections) including notching, drilling, fitting, riveting and / or welding or connecting with bolts and nuts (including rivets or bolts and nuts) conforming to Fe 410 W Gde E- 250, Quality B complete all as specified and as directed by Engineer-in-Charge.

Material and labour for dismantling of rolling shutter of any size and any description including all connected fittings, gear box, crank handle etc complete all as specified and as directed by Engineer-in-Charge.

Material and labour for 1.25mm thick steel rolling shutters, with ball bearing, gear operated type with bevel gear box and crank handle, safety lever locks mild steel with 4 levers including lock lever housing encasement of MS, duly embedded in floor for rolling shutters, with at least 1 perforated rolling shutters in each, gear operated type with bevel gear box and crank handle, top cover, anchoring rod, hasp and staple and one shop coat of primer, erected in position etc complete all as specified and as directed by Engineer-in-Charge. Make : M/s Swastik Rolling Shutters, Mumbai / M/s Shree Lakshmi Engg Wks, Bangalore / M/s Senthil Rolling Shutters & Engg Co, Chennai / M/s Jayaraj Industries, Chennai

Supply & Fix WPC jallies, 18mm thick, 600mm D including all mouldings and frame complete all as specified and as directed by Engineer-in-Charge.

Material and labour for preparing new steel surfaces of any description, over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed by Engineer-in-Charge. Make: Make : Asian Paints/ Nerolac Paints/ Dulux ( Akzonobel)/ Nippon Paint India Pvt Ltd

Taking down cement plaster of any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc and removing debris outside MD land complete all as specified and as directed by Engineer-in-Charge

Material and labour for rendering 15mm thick plaster in cement mortar (1:4) on external surfaces of the brick, PCC block or concrete surfaces, mixed with and including waterproofing compound as per manufacturer's instructions and finishing the surfaces even and smooth without using extra cement, upto the height of bldg roof including necessary formwork/ scaffolding /ladders and safety belt etc complete all as specified and as directed by Engineer-in-Charge.complete all as specified and as directed by Engineer-in-Charge. Note: waterproofing compound shall be measured and paid separately

Material and labour for 10 mm thick rendering in cement mortar (1:6) on brick/concrete surfaces & finishing the surface even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.

Material and labour for rendering 5mm thick plaster in cement mortar (1:3) on concrete surfaces of ceiling and finishing the surfaces even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.

Material and labour for new plastered wall surface and applying two coats of Acrylic weather proof coat 100% exterior grade paint over one coat of acrylic primer upto a height of bldg roof including formwork/scaffolding/ladders and safety belts with precautions etc complete all as specified and as directed by Engineer-in-Charge. Make : APEX ULTIMA” of Asian Paints/ “WEATHER COAT ALL GUARD” of Berger Paints/"EXCEL TOP GUARD” of Nerolac/ “DULUX WEATHERSHIELD MAX” of ICI India

Material and labour for preparation of newly plastered wall surfaces and applying two coats of oil bound distemper with roller over a coat of alkali resistant wall primer complete all as specified and directed by Engineer in Charge. Make: Asian Paints (Tractor) / Nerolac Paints /Jenson & NIcholson / Shalimar Paints

Material and labour for surface preparation of existing concrete components including grinding/rubbing carefully by grinder without damaging the existing concrete including cleaning the surfaces by blower , removal of external plaster wherever exists. Cost inclusive of transportation, labour conveying debris away from the Defence land, tools and tacklers, lead and lift and clean water thoroughly complete all as specified and directed by Engr-in-Charge.

Material and labour for providing and laying 20 mm thick POLYMER MODIFIED MORTAR over identified R.C.C. members in One layer in proportion as per approved make, blended to a required consistency and applying and finishing by floating, curing after initial setting time, including providing and inserting 10 mm mild steel shear key bars (minimum 3 nos per sqm), wherever required, bonding slurry, etc complete all as specified and as directed by Engineer-in-Charge. Make- Dr FIXIT/ FOSROC/ Krishna Conchem/BASF/Sika as approved by GE.

Material and labour for providing and applying rust cleaner (Re-backler solution) to exposed corroded reinforcement @ 0.20 Litre/Sqm or approved make over prepared reinforcement, including removing concrete all around reinforcement including from behind the reinforcing bars by manual methods such as hammering the rebar, using wire brushes, chiseling, etc. and applying rust removing solution of approved make with cotton waste swab to reinforcements etc complete as directed by Engineer-In-Charge. Make- Dr FIXIT/ FOSROC/ Krishna Conchem/BASF/Sika

Material and labour for providing and applying two coats of anticorrosive epoxy phenolic rebar protective system IPNet RB of Krishna Conchem or equivalent of approved make and quality comprises of resin and hardener mixed as per manufacturer's instructions with minimum 9-10 hours between the coats, sprinkling dry sand when 2nd coat is tacky so as to provide rough finish and ensuring air curing of minimum 10 hours after the top coat before any subsequent treatment etc. including scaffolding etc complete all as specified and as directed by Engineer-in-Charge. Make- Dr FIXIT/ FOSROC/ Krishna Conchem/BASF/Sika as approved by GE Note: (a) New Reinforcement shall be measured and paid separately under respective item. (b) Cost of welding deemed to be inclusive in this item of work. Note for Item No.92 to 95:- (i) The work under Item No. 92 to 95 shall be carried out by authorised applicator only. (ii) Defect liability for these items shall be 5 years from certified date of completion. (iii) Amount of 5% of these items shall be retained during RAR and FB. This amount shall be released after successful completion of Defects liability period as mentioned above. (iv) Non destructive testing shall be got carried out to decide fulfillment of fitness criteria of structure. (v) The test shall be carried out at each discrete location or locations decided by GE.

Material and labour for preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and as directed by Engineer-in-Charge.

Material and labour for washing, rubbing down and stopping of old painted surfaces of wall and applying two coats of Acrylic weather proof coat 100% exterior grade paint over one coat of acrylic primer upto a height of bldg roof including formwork/scaffolding/ladders and safety belts with precautions etc complete all as specified and as directed by Engineer-in-Charge. Make : APEX ULTIMA” of Asian Paints/ “WEATHER COAT ALL GUARD” of Berger Paints/"EXCEL TOP GUARD” of Nerolac/ “DULUX WEATHERSHIELD MAX” of ICI India

Material and labour for washing, rubbing down and stopping of old distempered and painted surfaces of wall and applying two coat of oil bound distemper with roller upto height of the bldg with safety belts/scaffolding etc complete all as specified and directed by Engineer in Charge. Make: Asian Paints (Tractor) / Nerolac Paints /Jenson & Nicholson / Shalimar Paints

Material and labour for washing, rubbing down and stopping of old distempered and painted surfaces of wall and applying one coat of oil bound distemper with roller with scaffolding etc complete all as specified and directed by Engineer in Charge. Make: Asian Paints (Tractor) / Nerolac Paints /Jenson & Nicholson / Shalimar Paints

Note: Deduct Credit for demolished / dismantled material of Rs. (-) 35,704.00 (Minus) as listed in Schedule of Credit. Tenderers will not quote against this item being a tentative amount to be considered to arrive at the 'Contract Sum'

Vishal Builders (BID ID -3282046)