Renovation and Transformation of Kanaklal Baruah Auditorium at Assam State Museum Guwahati-01

Amount

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :Of area beyond 3 sq. metres

Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in-Charge.

Hacking of CC flooring including cleaning for surface etc. complete as per direction of the Engineer-in-Charge.

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead for For thickness of tiles 10 mm to 25 mm

Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead.

Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of: in G.S. Sheet roofing

Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead.

Dismantling cement asbestos or other hard board ceiling or partition walls including stacking of serviceable materials and disposal of unserviceable materials within 50 metres lead

Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking within 50 metres lead : Up to 10 mm thick

Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge.

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.

Providing and injecting chemical emulsion for Preconstructional antitermite treatment and creating a chemical barrier under and alround the column pitswall trenches basement excavation top surface if plinth filling junction of wall and floor along the external perimer of binding expansion joints,surroundings of pipes and conduit etc. omplete(Plinth area of the building at ground floor only shall be easuredas per I.S. 6313 (Part II 1981) Aldrine emulsifiable concentrate or any other approved material such as Hepthachlor or chlordance will be used. The rate shall include material and application with below proportion of chemical emulsion :-(1) Treatment for Masonary & foundatiion 5 Liters per Sq.m.(2) Back fill in immediate contract with foundation 7.5 Litres per Sq.M.(3) Treatment of Top surface of plinth filling 5 Litres per Sq.M.(4) Treatment of soil along External Perimerter of Building 7.50 Litres per Sq.M.(5) Treatment of soil under Apron Along extrnal Perimeter 5 litres per sq.M

Supplying chemical emulsion in sealed containers including delivery as specified. Chlorpyriphos/ Lindane emulsifiable concentrate of 20%

Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) :(1) Along external wall where the apron is not provided using chemical emulsion @ 7.5 litres / sqm of the vertical surface ofthe substructure to a depth of 300mm including excavation channel along the wall & rodding etc. complete: With Chlorpyriphos/ Lindane E.C. 20% with 1%concentration

Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor: With Chlorpyriphos/Lindane E.C. 20% with 1% concentration

Treatment of existing masonry using chemical emulsion @ one litre per hole at 300 mm interval including drilling holes at 45 degree and plugging them with cement mortar 1:2 (1 cement : 2 coarse sand) to the full depth of the hole : With Chlorpyriphos/Lindane E.C. 20% with 1% concentration

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in Cement mortar 1:4 (1 cement : 4 coarse sand)

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand)

Providing and laying in position ready mixed or site batched design mix cement concrete for plain cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana/Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering and finishing as per direction of the engineer-in-charge; for the following grades of concrete. All works upto plinth level Concrete of M15 grade with minimum cement content of 240 kg /cum

Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 12.5mm nominal size derived from natural sources)With F.P.S.(non modular) bricks

Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.

Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)

Reinforcement steel @2% vol of concrete Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.

Providing 15 mm cement plaster on the rough side of single or half brick wall of mix in 1:4 (1 cement: 4 fine sand)

Providing and laying vitrified floor tiles in different sizes (thickness to be pecified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm

Marble stone flooring with 18 mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with : Black Zebra or as specified type.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives. New work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm.

Wooden Flooring : 25 mm wooden planking, tongued and grooved in flooring, including fixing with iron screws complete with :Second class teak wood

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIScertification marks)

Providing and fixing mineral fibre false ceiling tiles at all heights of size 595X595mm of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflectance ? 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7)in true horizontal level suspended on interlocking T-Grid of hot dipped all round galvanized iron section of 0.33 mm thick(galvanized @120 gsm) comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item (galvanised@80gsm) 50 mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main ‘T’. The system should rest on periphery walls /partitions with the help of GI perimeter wall angle of size24x24X3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings and as per directions of the engineer-in-charge. With 16 mm thick beveled tegular mineral fibre false ceiling tile (NRC 0.55 to 0.6

Providing, fabricating and fixing plain/curved panelling on RCC/Masonry /plaster surfaces using standard anodized extruded aluminium box sections of approved quality and make, fixed firmly to the floor at base and adjacent wall/partition/ceiling complete including the following specifications: The exposed panels between the top panel and bottom panel of the plywood shall be finished by fixing 21mm thick ARMSTRONG ‘SOUND SOAK’ Acoustical wall panelling (2200mm x 600mmx21mm thick) approved make and shade, fixing as per manufacturer’s specifications and design with additional hardware, fittings, fixing etc all complete as per manufacturers specifications and Note: a. The panelling area will be measured from floor to the false ceiling level including the skirting. Rate should be inclusive of the framing, raceways, skirting, wire carrier, plywood, laminate, Armstrong ‘Sound soak’ wall panelling(2200x600x21mm)labour, etc all complete b. All exposed aluminium sections shall be powder coated (60 microns) of approved shade and colour as directed.

Designing, fabricating, testing, installing and fixing in position 60 mm thick acoustic fire door with seasoned Hardwood frame (size 100x75mm with rebate of required size . Shutter to be made using frame of 34x100mm section of chemically treated seasoned wood. All wood work shall be treated as termite free. 12 mm thick commercial plywood of Approved make with 01 mm thick lamination with suitable adhesive of approved make and shade shall be fixed over and cavity shall be filled with acoustic and fire insulation material of 3mm thick MLV Sheet of min. 1700 Kg/m3 density and rockwool fire insulation material of 60 Kg/m3 density. Periphery of shutter to be covered with 12mm thick teak wood lipping matching to shade of door shutter. Weather seal to be fixed on frame of door to fill the gap of shutter and wooden frame (chowkhat). Dropdown seal to be fixed in shutter to block gap with floor when door is closed. The cost shall Includes all Hardware fittings like Heavy duty SS hinges of suitable size, Handles, Tower bolts, door closers, locking arrangement and panic bar of Approved brand and manufacture. Make : Global Fire/ Navair/ Absound Overseas/Saint gobain

Seating Supply and installation of PUSH BACK CHAIR with auto tip up cushion,PPCP-Injection molded Housing cushion and Backrest with All sheet metal parts of powder coated / or zinc passivated,Integral Skin Armrest/PPCP /Wooden, finished with approved fabric and color having 3mm lamination on fabric having FR grade material confirms to IS 15061 For horizontal Burning test. Frame of ERW Round Tube / IS :3074 - 2005,it should have Cushion Frame - 19 dia 1.2mm thick,it should have Back Rest - 16 dia 1.63 mm thick, SIZE – L823 X W470(for 22” ctc width),it should have S Spring Wire Dia – 2.9 POLYURETHANE FOAMS: it should have Density: 50 + 5 Kg/M3 / JIS K 6401 or better,it should have Constant Compression Set: (Max. 13Percentage) JIS K 6401,it should have Cushion – L490 X W430X Height 125 (at Front) 80 (at Rear) ,it should have Back Rest – L 750X W480 X Height 110(at Front) 60 (at Rear) , Remark – dimension tolerance + 10 mm SPRING: it should have Auto Tip-up – Torsion Spring ,it should have Spring Steel IS : 4454 -1981 GRADE 2 (part I) WING COMPONENT: it should have For Push Back mechanism – tension Spring / Spring Steel, it should have IS : 4454 - 1981 GRADE 2,it should have HRPO Sheet Metal / IS : 1079 - 1994 or better,it should have Wing frame “C” Channel, Channel 2MM Thick X 60mm Width or better, it should have Rectangular Tube IS:4923-1985 50X25X1.63MM THK or better, Remark – dimension tolerance + 2 mm BACK and CUSHION HOUSING: it should have Material: PPCP (Injection Molded),it should have Back Rest - IS:10951-1984 PPCP BLACK 2.3mm thick SIZE – 457WX755L or better,it should have Cushion - IS:10951 - 1984 PPCP BLACK 2.3mm thick SIZE – W435X552 or better, Remark – dimension tolerance + 2 mm ARM REST: it should have 8 Arm-rest, it should have Solid Wood SLIDER MECHNAISM: it should have mechnaism of Foldable Type SIZE L425X80X15,it should have Sliding mechanism Will have travel of max 60mm forward,it should have Roller and ball cage mechanism for sliding,it should have Size – channel 33X210MM 2MM Thick or better, it should have change for continual improvement of the mechanism, Remark – dimension tolerance + 2 mm SEAT DIMENSIONS: it should have Cushion Height – 450 +10,it should have Back Rest Height – 1030 +10,it should have After Push Back Dimension – 920 +10, it should have Normal Dimension – 750 +10, it should have After Push Back Dimension with Open Tablet 1000mm +10, Remark – dimension tolerance + 10 mm INSTALLATION HARWARE: it should have RCC Flooring 4 Inch - Anchor Fastener M8X100mmL,it should have Sleve Dia 14mmWith 30mmL (4 Nos),it should have Wooden Flooring 2 Inch - Coach Bolt for M8X40/50 (4Nos) TABLET MECHANISM: it should have Mechanism: Combination of solid square bar with sheet metal plate, it should have Writing Pad - MDF Bord 12mm Thik Black Colour,it should have Tablet Assembly - Foldeble Type (can be folded inside the wing assembly when not in use), Tablet - Inclined 12 + 2° (Degree) From the Floor will be allowed. APPROVED MAKE - WIRPO-SYMPHONY ,GODREJ - MODEL GLAMOUR , FEATHERLITE - VENUS 6604 WD , HERMAN MILLAR Vendor has to approve the Make and Model with Project Incharge ,Vendor has to install 1 Demo unit of chair at Auditorium

Podium Table- made out of IS-710 waterproof ply with solid surface finish with malamine coating with all required hardware and cutout for AV as required,Custom Design complete with podium light, side extendable laptop resting drawer, should have facility to fix 21.5 ” touch Panel / Writing Panel with connection of small PC. With Front design ,logo with back light illumination. Make :Custom

Providing and fixing machine tuffed loop pile high low scroll nylon carpet effective pile height 6mm, total pile weight not less than 850 gm/sqm. secondary backing action back 55 gms/sqm. In rolls of 3.66 mtr. width as per size, shade, design and direction of Engineer-in-charge and as per manufacturer's specifications. The sample may be approved by the Engineer-in-charge before start of the work. The surface area will be measured for payment. The carpet to be bakced with 6mm thick PU underlay. Approved make: Absound floor, Heritage, CCIL.

Providing and fixing 19mm thick both side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand boxes,shelves,racks,almirah,cupboard and drawer etc. including necessary nails,screws etc. complete as per direction of Engineer-incharge.

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite stone slab all colour and texture except black, Cherry/Ruby red

Providing and fixing of moisture proof PVC self adhesive wall paper of approved design

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) 30 mm th

Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Two track two panels sliding window made of (small series) frame 52 x 44 mm &sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 1.75 sqm)

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured).

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc.

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :200x10 mm

Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. Upto 5mm depth and 5 mm width

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.

Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete , Triple strip vertical type

Providing and fixing brass curtain rods of wall thickness 1.25 mm with two brass brackets fixed with brass screws and wooden plugs etc. wherever necessary complete. 25 mm diameter.

Supply and installation of natural sand stone wall cladding of approved design and shade complete with installation accessories , adhesive, filler material, scafolding etc

Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying :(a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours.(b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours.The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.

Providing and applying fibre reinforced elastomeric liquid water proofing membrane with resilient acrylic polymers having Sun Reflectivity Index (SRI) of 105 on top of concrete roof in three coats @10.76 litre/ 10 sqm. One coat of self-priming of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1) and two coats of undiluted elastomeric waterproofing liquid (dry film thickness of complete application/system not less than 500 microns). The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete in all respect as per the direction of Engineer-in-Charge.

Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying:(a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm.(b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm.(c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound@ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around.(d) fourth and final layer of brick tiling with cement mortar (which will be paid for separately. For the purpose of measurement the entire treated surface will be measured.

Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cuttingto size and shape wherever required. 1.00 mm thick with zinc coating not less than 275 gm/m²

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes

Supply and installation of sound proof glass partition of laminated hollow core sandwich glass of 8 mm thickness

Supply and installation of brass Door handle of approved design

Supply and Installation of 4 lever locking system complete with all accessories

Supply and installation of Brass Aldrop of approved make and design complete with necessary screws , nuts etc

Supply and installation of 18" Brass tower bolt of approved make and design

Supply and installation of 8" Brass tower bolt of approved make and design

Supply and installation of door handle with integrated lock of approved make and design

Supply and installation of brass mortise door handle without lock of approved make

Suppply and installation of toilet door handle

Supply and installation of radium wayfinding tape

Supply and installation of MS framework for video wall installation finished with powder coating as per approved shade

Polishing of stage furniture with Varnishing with varnish of approved brand and manufacture Two or more coats of glue sizing with copal varnish overan under coat of flatting varnish

Supply of wheelchair of approved make and design

Supply and installation of brass channel lining at edge of the stage complete with bending , screwing polishing etc.

Supplying and fitting 4.5Kg Capacity CO2 type fire extinguisher with labour as directed by the department.

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlleddevice (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap

Providing & fixing chrome plated brass battery based infrared sensor operated pillar cock, having foam flow technology.

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe 40 mm dia

Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge.

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 453x357 mm

Providing and fixing soil, waste and vent pipes : 100 mm dia Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms

Providing and fixing brass bib cock of approved quality : 15 mm nominal bore of approved make and design

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 18.7.2 20 mm nominal dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 18.9.9 100 mm nominal dia Pipes

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with piano type switch, phenolic laminated sheet, suitable size MS box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group C

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

2 X 4 sq. mm + 1 X 4 sq. mm earth wire

4 X 10 sq. mm + 2 X 6 sq. mm earth wire

Installation ,Testing, Commissioning of wall bracket /ceiling fittings of all sizes and shapes containing upto two GLS/CFL/LED lamps per fitting, complete with all accessories including connections etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providng and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings).

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providng and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings).

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 16 way, Double door

Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.

Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.

Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. Upto 450 mm sweep

Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) 8 way (4 + 24), Double door

Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. 100 A,30KA,FPMCCB

125 A,36KA,FPMCCB

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole

Triple pole and neutral

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.

Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required.

Supply , installation testing and comissioning of ceiling mounted 12 watt LED downlight as required (Rate as per analysis enclosed)

Supply, installation testing and commissioning of wall mounted LED Ball OUTDOOR Wall up Down light Waterproof Lamp Back finish (Warm White) as required (Rate as per analysis enclosed)

Supplying of Stair Air (Dust resistant shade), 1250 mm Ceiling Fan as required (Rate as per analysis enclosed)

Supplying of 450mm sweep , 1400 rpm heavy duty exhaust fan as required (Rate as per analysis enclosed)

Supply, installation testing and commissioning of LED strip light as required (Rate as per analysis enclosed)

Supply and installation of single sided EXIT with RIGHT ARROW SSD sineage with built in 2 hrs battery back up EXIT with RIGHT as required ((Rate as per analysis enclosed)

Supply, installation, testing and commissioning of 3 W LED footlight as required (Rate as per analysis enclosed)

Supply, installation of of 5KVA , 90-300V Mainline Digital Voltage Stabilizer complete with all connection as required (Rate as per analysis enclosed)

Supply, nstallation of Inverter & Battery Combo, 1100 Sine Wave Inverter, RC-25000 200 Ah Tall Tubular Battery with Trolley complete with all connection as equired (Rate as per analysis enclosed)

Supplyand installation of cover light complete with plexiglass cover including connection as required (Rate as per analysis enclosed)

Supplying of LED Batten Light fixtures complete with all accessoriews as required (Rate as per analysis enclosed)

Supplying of 300 mm AC Exhaust Fans as required (Rate as per analysis enclosed)

Supplying of 1200 mm Sweep AC Ceiling fan, Energy Saving Models as required (Rate as per analysis enclosed)

Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required. 3 run of cable

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 25 mm

Supply and installation of CAT 6 mounting cord (1 Meter)

Supply and installation of CAT 6 mounting cord (2 Meter)

Supply and installation of CAT 6 Single I/O with face plate and back box

Supply and installation of CAT 6 Dual I/O with face plate and back box

Supply and installation of 24 port Jack Panel (Fully Loaded)

Supply and installation of I/O Termination and fixing

Supply and installation of G.I. Junction Box (150mm x 150mm) with cover

Supply and installation of Jack panel termination

Supply of Access point and Rack panel fixing and dressing

Supply and installation of Encoder with recording and streaming with 1 HDMI and 1 Audio Input and 1 Nos Ethernet port at output with Ethernet support The device should have a USB or a network storage capability with multicast and unicast streaming

Supply and installation of Supply and installation of 8 channel wireless VHF microphone system

Supply and installation of Hdbaset Transmitter :twisted pair transmitter for HDMI and Controls (RS232/IR).,Make : Kramer/Extron/Crestron/AMX/Lightware

Supply and installation of Hdbaset Receiver :twisted pair receivers for HDMI and Controls (RS232/IR). Make : Kramer/Extron/Crestron/AMX/Lightware

Supply and installation of Multiformat Presentation Switcher/Scaler : 16X16 Modular Multi–Format Digital Matrix SwitcherMax.minimum 6 HDMI inputs, 4 Twisted pair input with HDbaseT compatibility, Should have 8 Output on matrix format with 6 HDMI output and 8 Twisted pair output with HDbaseT, with Digital and analog audio output, Data Rate — 10.2Gbps (3.4Gbps per graphics channel) ,Mix Input/Output Modules,Control — RS–232, Ethernet and IR Size — Standard 19" (4U). Rack "ears" included. Audio — E.Make :Kramer/Extron/Crestron/AMX/Lightware

Supply and installation of Active Wall Plate : Wall plate with Twisted pair/ HD BaseT Transmitter with 2x1 AV switcher Should have Auto switching along with 1 HDMI and 1 VGA, 1 x Audio inputs Output: 1x Twisted pair/ HDbaseT output supporting audio, video, controls and power for 70mtrs or more distance.Make :Kramer/Extron/Crestron/Lightware/AMX

Supply and installation of Floor Box-it should have Audio XLR x 1 Connectivity ,Power 5/15 A X 1,LAN X 1 Make: Custom

Supply and installation of 1.8 Mtr HDMI Highspeed flexible Cable.Make: Kramer/Extron/Crestron/Lightware/AMX

Supply and installation of 1.8 Mtr Highspeed ultraslim HDMI Cable.Make: Kramer/Extron/Crestron/Lightware/AMX

Supply and installation of 1.8 Mtr 15 Pin HD and 3.5 MM Stereo audio cable Make: Kramer/Extron/Crestron/Lightware/AMX

Supply and installation of 7.6 Mtr HDMI Highspeed flexible Cable.Make: Kramer/Extron/Crestron/Lightware/AMX or equivallent

Supply and installation of Various types of A/V connectors - Lumpsump

Supply and installation of Supply ,installation,Testing and comissioning of LAN switch and connection

Supply and installation of corded wall mounted intercom

Supplying, installation, testing & commissioning of heat detector operating at 54ºC/57ºC with rate of rise cum fixed temperature (dual thermistor) type with mounting base complete with all connection etc. as required.

Supplying, installation, testing & commissioning of smoke detector with builtin LED and mounting base complete with all connections etc. as required.

Supplying, installation, testing & commissioning of manual call boxes of MS construction in surface/recess with stainless steel chain & hammer assembly complete with glass and push button etc. as required.

Supplying, installation, testing & commissioning fire alarm sounder with facility to make announcement, mounted in M.S. box (16 SWG) with hinged cover plate & suitable for operation with amplifier i/c line matching transformer etc. complete as required.

Supplying, installation, testing & commissioning of intelligent analog addressable photothermal detector complete with mounting base complete as required.

Supplying, installation, testing & commissioning of addressable beam detector with short circuit isolator (inbuilt or seperate) complete with emitter and receiver including connections with remote test features etc complete as required.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

Supply and installation of podium Interactive Screen: 12.3 '' interactive display with annotation software,wireless pen,fingure touch,annotation with Whiteboard. Make : Wacom/Crestron/Kramer/Lightware/Extron/ microsoft

Lobby Display (Interactive and Digital Signage ) Digital Singage-H.265, True 4K,dual video decode,advanced HTML5 player with expanded I/O package. Make : Brightsign/Kramer/Crestron/Extron

Stage Monitor: Multi-position Floor monitor with 3 X 2.25" Mid-high drivers and single 5.25" woofer gives articulated array configuration 120 X 60 degree coverage; Frequency response 70Hz- 16 kHz; Senstivity 91 dB SPL; Max SPL 111 Db SPL; power handling 100W@ 8 ohm; Internal passive crossover network does not require active equalization; Rear bumper prevents unwanted movement; Drivers enclosed in Molded textured polyethylene material with powder coated steel grille.Make : Make:Bose/LAcoustic/ MeyerSound

Speaker(Green Room Speakers): A full range speaker with freq response 95Hz to 17kHz; Nominal dispresion of 170H X 160V; Cont power: 16W @ 8 Ohms; sensitivity 84dB SPL; Max SPL 96dB SPL ;inbuilt drivers with polypropylene encloser with powder coated steel grille.(Green Room)Make:Bose/L-Acoustic/MeyerSound

Supply and installation of Video Wall system of 4K display quality with P3 configuration complete with all accessories, connectors etc

Connector Type (2) XLR/TRS Combo Jack, (1) 3.5 mm Input, and (1) XLR link Output Coverage (Nominal -6 dB) H 90° Coverage (Nominal -6 dB) V 60° Depth 15.08" (383mm) Family ZLX Frequency Range (-10 dB) 42 Hz - 20 kHz Frequency Response (-3 dB) 55 Hz - 18 kHz Grill 18 Gauge Steel with Black Powder Coat Height 26.97" (685mm) HF Transducer DH-1K LF Transducer EVS-15L, 380 mm (15 in) Woofer Max. SPL/1m (calc) 127dB Maximum SPL 127dB Power Rating 1000W Powered or Passive Powered Speaker Type Full-Range Width 16.65" (423mm) Woofer Size 12inch

Specifications Antennas - Flexible TNC 1/2 Wave Audio Frequency Response - 80 Hz - 18kHz +/- 2dB Battery Life - 14 hours with (2) AA alkalines typical Case Material - Metal Connector Type - 1/4 inch unbalanced, 3-pin XLR balanced Controls - on/off, Set, Up, Down, Sync Distortion - (@ 1 kHz, 40 kHz deviation) less than 1.0, 0.4 typical % Diversity - True Antenna Dynamic Range - Greater than 95 dB Element - PL22 Cardioid Dynamic Power Supply - 12 VDC, 500mA max Receiver Type - Synthesized PLL Agile UHF RF Frequency Range - 16 MHz RF Output - 8 mW typical RF Sensitivity - (12 dB SINAD) less than 1.0 uV Signal-to-Noise Ratio - (A-weighted) greater than 100 dB Squelch - Tone code plus Amplitude

Audio Frequency Response 80 Hz - 16,000 Hz Case Material Die cast zinc Connector Type 3-pin XLR MORE SPECIFICATIONS Element Dynamic Impedance, Low-Z balanced 600Ω Mic Type Handheld Open Circuit Voltage 2.2mV/Pascal Polar Pattern Supercardioid Power Requirement Passive Wired/Wireless Wired

Audio Frequency Response 50 Hz - 16,000 Hz Case Material Die cast zinc Connector Type 3-pin XLR MORE SPECIFICATIONS Dynamic Range 107dB Element Condenser (self-biased) Family PL Series Finish Textured Satin Black Impedance, Low-Z balanced 200Ω Maximum SPL (1% THD) 132dB Mic Type Instrument Open Circuit Voltage 6mV/Pascal Polar Pattern Cardioid Power Requirement 11 to 52 VDC Wired/Wireless Wired

Type: Table/Floor Stand Height: 350-530 mm Base Dia: 150 mm

Type: Floor Stand Height: 920-1500 mm Base Dia: 230 mm

Dual Capsule Design with four polar patterns: Omnidirectional, Cardioid, Supercardioid, and Hypercardioid. Thread or flange mount Cable can exit from the side or through the bottom of the gooseneck Switchable high pass filter Consistent on-axis response.

16 mono channels 16 internal time-delay effects Neutrik mic XLR and Neutrik 1/4 inch jacks Channel insert Super wide gain "DuoPre" mic line input 3 band EQ with MusiQ 4 auxes Illuminated mute Sound image pan Illuminated PFL & peak warning indicator ALPS 100mm faders 4 stereo channels with 2-band EQ and inputs for extra sources Stereo returns & playback All inputs with level control 12 bar meters Mono/stereo function on auxes 1 & 2 Monitor output section Alt stereo output source Configurable USB stereo audio in/out Rack ears available

Customized cable, connectors, installation and SPL & Acoustic Calibration and Training.

Power System: Continuous – 400 W ( 335 W LF + 65 W HF), Peak – 800 W (670 W LF + 130 W HF) Maximum SPL @ 1m: 118 dB Continuous / 121 dB Peak Coverage ( HxV ): 70° H x 70° V Spherical horn Transducer Low: 12” Coax / 2” voice coil Transducer High: 1” Neodymium Driver / 1” voice coil Protection: Low – High analog limiter Electronic Protections: Modeller with 16 Preset / Line Volume/ Clipping LED indicator / ground switch Input Level: Line +4 dB Input Impedance: 30 kΩ Balanced / 15 kΩ Unbalanced Input Connector: Combo Jack with XLR / TRS External Control: Volume control / Power on with green LED/ clip limiter with red LED/ ground lift Power Supply: AC – 220 / 240 V or AC – 110 / 120 Volt, with switching power mode.

Wiring and Installation charges

Customized Furniture for Equipments and Control room etc

10th Gen Intel® Core™ i7-10700 (16 MB cache, 16 cores, 16 threads, 4.0 GHz to 4.80 GHz Turbo) with 24 inch dual monitor, HDMI port , UPS , Blu Ray Player and all required accessories with 80TB External HDD complete with Keyboard Dell Entry Keyboard KB216 Black (QWERTY), Ports 4 USB 3.2 Gen 1 Type-A,4 USB 2.0 Type-A 1 Combo Audio Jack,1 Line out,1 VGA port 1 HDMI out,1 RJ-45 Optical Drive Tray load DVD Drive (Reads and Writes to DVD/CD) Slots 1 full-height Gen 3 PCIe x16 slot 2 full-height PCIex1 slot 1 M.2 2230 slot for WiFi and Bluetooth card 1 M.2 2230/2280 slot for solid-state drive or Intel Optane 2 SATA slots for 3.5-inch HDD, 2.5-inch HDD/SSD

Nuendo12 (Full version) Audio workstation with 8 analog out 192 KHz Sound card and Control Room Equipments A/V and multimedia creatives, today’s post-production professionals trust Steinberg Nuendo’s cutting edge tools for their audio needs. Nuendo 12 beefs up the software's essential tools with smoother workflows, expanded Dolby Atmos tools, Apple M-series support, and more automated editing features for small tasks that used to eat away at your precious time. With time-saving features like these, professionals can save their bandwidth for the big picture tasks that matter most. Whether you’re building the next blockbuster film, producing TV content, or masterminding the game industry’s next indie darling, Nuendo 12 is here make the best possible version of your vision a reality

Dolby Digital Cinema Processor CP750 p with installation and all accessories. Eight-Channel Digital Input (4 × AES/EBU) for Digital Cinema Server. Includes support for Dolby Surround 7.1; provides access to hearing-impaired (HI) and visually impaired-narrative (VI-N) tracks when provided on 7/8. Two Digital Pair Inputs (1 × AES/EBU each. Connects alternative content sources (for example, preshow server or satellite receiver). Toslink Digital Input. Connects alternative content sources that output optical digital audio. Eight-Channel Analog Input. Connects an existing film sound processor for hybrid installations or retrofits. USB Connector. Allows easy setup of your system from a PC. Ethernet Connector For connection with the Dolby Show Manager network; allows monitoring, control, or upgrades anywhere on the network for glitch-free shows

Supply and installation of video conferencing facility complete with full HD camera, microphone, cabling etc of cisco, logitek

Supplying and installation of theatre lighting system of approved make complete with Halogen profile light, Halogen Fresnel light,Halogen Planoconvex spot light,Sealed Beam Light , complete with colour frame . yoke, suitable clamp, safety chain & sockets, Reflector, Lens, Wall Mounting, Moving head , Electronic Dimmer with Dual DMX signals input and can work simultaneously, Cross connecting panel for interchanging the light circuits with the dimmers as desired DMX light Control Console suitable for controlling dimmers. GI pipe track, truss , bracket etc painted black hanged from the slab by means of MS flat to act as lighting and Frill bars and support for slotted cable tray

Supplying and installation of motorized stage curtain complete with all accessories, tracks, brackets etc

Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 volts, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 amps tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB’s (but without MCB’s and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) 4 way (4 + 12), Double door

Providing and fixing following rating and breaking capacity MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. 125 A 36 KA, FPMCCB

100 A 30 KA, FPMCCB

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single Pole

Triple Pole and neutral

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required 4 X 10 sq. mm + 2 X 6 sq. mm earth wire

Supply of Air Cooled Ductable Package Air Conditioners Unit to operate from 415+- 10% volt , 50 Hz , 3 phase power supply and consisting of hermitically sealed Variable speed inverter scroll compressor and Compiatble of R410A as refrigerant. The indoor unit will consist of evaporator coil,evaporator fan,expansion valve/capillary, etc complete in all respect.The outdoor unit will consist of compressor ,condensing coil & condensing fan etc. complete in all respect. Both the indoor & outdoor unit will be connected using refrigerant piping &control cabling. Capacity-8.5TR Inverter Machines

Ducting work including required insulation, piping and all other related works (@30% of AC work)

J.J.Associates

M/S CDS BUSINESS ASSOCIATE