Loading
Loading…
Loading…
Tender ID
Tender Value
Refer Docs
EMD Value
₹20 L
Closing Date
4 Mar 2026, 3:00 pmClosed
Single Packet
Normal Tender
No
Itemwise
Lowest to Highest
CONSIGNEE
Not Applicable
Expenditure
General
PT
2 conditions · 1 needing a document upload
Eligibility for offers quoting Specified make as mentioned in description. 1) (i) Offers for acceptable makes mentioned in the tender schedule will only be considered for placing bulk order . (ii) For the acceptable make mentioned in tender: a. In case, the tenderer is the OEM of the acceptable make, tenderer should clearly mention acceptable make offered. b. In case, the tenderer is authorized agent, tenderer shall submit the tender specific authorization. In case, the dealer/distributor of the OEM of the acceptable make, tenderer should upload the current authorization/dealership certificate issued by the OEM. c. In case the tenderer is Sub dealer of the specified OEM, firm should upload the copy authorization letter/attested certificate issued by authorized dealer regarding sub dealership and confirmation that authorized dealer will take the responsibility of genuineness and warranty of spare (of particular make, spare part description and part number) supplied by the sub dealer to Indian Railways. And also firm should provide copy of invoice of their dealer/distributor along with manufacturers test and warranty certificate as a proof of genuineness. Note: The prospective Tenderers seeking developmental order can refer to Para 5.0 & 6.0 of Policy on Procurement of spares for Track Machines towards inclusion of their make in the list.
Restrictions under Rule 144(xi) of GFR-2017: a) I have read the clause regarding Restrictions under Rule 144 (xi) of GFRs.2017 on procurement from a bidder of a country which shares land border with India and as detailed in Tender documents. b) I certify that this bidder is not from such a country or, if from such a country, has been registered with the Competent Authority. c) I hereby certify that this bidder fulfils all requirements in this regard and is eligible to be considered. [wherever, applicable, evidence of valid registration by the competent authority shall be attached]. Note: If the tenderers are not agreeable to above declarations, they have to categorically mention about the disagreement in Techno Commercial Deviation.
51 conditions · 1 needing a document upload
It will be responsibility of suppliers to upload clear/visible documents in support of their claim and no back reference will be made for submission of such documents
Have you kept your offer valid for 180 days
Tender not accompanied with Bid Security declaration will not be evaluated.
a) Firms are advised to supply the material duly embossing/engraving or stenciling with permanent marker the name of manufacturer/supplier and year of manufacture at a place which is preferably visible and shall not get worn out during service. b) If none of the above is possible the same to be marked on packing.
The firm shall attach all the relevant documents as proof of their eligibility while submitting their offer. The offer will be evaluated based on the documents uploaded by the firm in this tender. Firms to note that physical documents will not be accepted after opening the tender. Any document submitted after opening the tender will not be considered while evaluating the firms offer
Have you furnished a performance statement?
For GST conditions, tenderers are requested to refer the General Conditions / Instructions to tenderers
Submission of EMD is mandatory. Exemption and other details will be as per Para 13 of Instructions to Tenderers for e-tender attached with this tender. Firm's seeking exemption from deposition of EMD shall have to attach scanned copy of requisite documentary evidence in support of their claim along with Offer, failing which the Offer will be summarily rejected. (NB:- In two packet bidding system, such documents must be uploaded at the time of techno commercial bid.)
This tender complies with public procurement policy (make in india) order-2017, revised date 16092017., issued by department of Industrial promotion and policy, Ministry of commerce, circulated vide Railway Board letter no. 2015/RS(G)/779/2/Pt.1 dated 25.09.2020 & 2020/ RS(G)/779/2/Pt.1 (E3322671) dtd.20.08.2024.
Have you furnished the clause-wise compliance on technical specifications?
I/We agree to supply the tendered stores at the rates quoted by me/us in accordance with the IRS Conditions of Contract and [or] special and [or] other conditions specified/attached with the tender.
I/We agree to accept General Tender Conditions available at SOUTH CENTRAL RAILWAY STORES DOCUMENTS LINK.
Firms shall submit Performance statement of last 5 years.
Have you read instructions to tenderers, General Tender conditions, Special conditions of contract, IRS conditions of contract attached with the tender?
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Have you furnished the statement of Deviations? (preferably 'NIL')
Have you furnished authorization/dealership certificate issued by OEM as specific authorization? (if manufacturer is not quoting directly) ( Click here to download Format)
Offer should be valid for 180 days
Have you submitted a Bid security declaration as per Tender conditions?
Have you submitted relevant/ valid documents as per Eligibility Criteria?
The bidder shall give self- certification for local content in the quoted item at the time of tendering. However, at the time of execution of the project, for all contracts above INR 10 Crore, the contractor/ supplier shall be required to give local content certification duly certified by cost/ chartered accountant in practice. For cases where it is not possible to provide certification by Cost/Chartered Accountant at the time of execution of project, the supplier shall be permitted to provide the certificate for local content from Cost/Chartered Accountant after completion of the contract, within time limit acceptable to the procuring entity. In case the contractor/ supplier does not meet the stipulated local content requirement and the category of the supplier changes from Class-I to Class-II/ Non-local, a penalty upto 10% of the contract value may be imposed.
All conditions shall be as per tender document.
Tenders submitted online through IREPS only will be considered. All corrigenda to this tender will also be issued online through IREPS and bidders are advised to keep a watch for such corrigenda, if any and quote their bids accordingly.
11 locations · 154 Numbers total
Rate contract for the supply of Hydraulic spares for IR Track machines of Make: Plasser, Bosch Rexroth.
SCR-26-CAP-HDS2
SCR-26-CAP-HDS2
Open - Indigenous
Goods
Unknown (Unspecified Location)
₹0
₹20 L
4 Mar 2026
30 Jan 2026
30 items · 154 Numbers total
Hydraulic pump as per Plasser Part No. 62.05.1000.483 Bosch Rexroth Part No.A4VG2 50EP4D1/32LNZFO2FO1SH Make: Plasser, Bosch Rexroth [ Rate of supply 34 units per Year , Commencement Time Allowed -1 Day ]
| Delivery Location | State | Quantity |
|---|---|---|
| ANYWHERE IN CR | — | 4.00 Numbers |
| ANYWHERE IN ECOR | — | 4.00 Numbers |
| ANYWHERE IN ER | — | 9.00 Numbers |
| ANYWHERE IN NFR | — | 3.00 Numbers |
| ANYWHERE IN SECR | — | 1.00 Numbers |
| ANYWHERE IN SER | — | 1.00 Numbers |
| ANYWHERE IN WR | — | 12.00 Numbers |
| Total | 34 Numbers | |
Hydraulic pump as per Plasser Part No. 62.05.4000.252 Bosch Rexroth Part No. AA10V O45DRF1/31RPSC62K02+ AA10V028DFR1/31RPSC62N00 Make: Plasser, Bosch Rexroth [ Rate of supply 3 units per Year , Commencement Time Allowed -1 Day ]
| Delivery Location | State | Quantity |
|---|---|---|
| ANYWHERE IN WR | — | 3.00 Numbers |
| Total | 3 Numbers | |
Driving Pump as per Plasser Part No. 62.05.1000.332A Bosch Rexroth Part No. A4VG25 0HD3D1/32LNZFO2FOO1 Make: plasser, Bosch Rexroth. [ Rate of supply 6 units per Year , Commencement Time Allowed -1 Day ]
| Delivery Location | State | Quantity |
|---|---|---|
| ANYWHERE IN ER | — | 3.00 Numbers |
| ANYWHERE IN NFR | — | 1.00 Numbers |
| ANYWHERE IN WR | — | 2.00 Numbers |
| Total | 6 Numbers | |
Driving Pump as per Plasser Part No. HY704X180L/EP4/A380BAR Bosch Rexroth Part N o. A4VG180EP4D1/32LNZD02FOO1SH Make: plasser, Bosch Rexroth. [ Rate of supply 23 units per Year , Commencement Time Allowed -1 Day ]
| Delivery Location | State | Quantity |
|---|---|---|
| ANYWHERE IN CR | — | 2.00 Numbers |
| ANYWHERE IN ECR | — | 1.00 Numbers |
| ANYWHERE IN ER | — | 5.00 Numbers |
| ANYWHERE IN NCR | — | 6.00 Numbers |
| ANYWHERE IN NER | — | 1.00 Numbers |
| ANYWHERE IN NFR | — | 2.00 Numbers |
| ANYWHERE IN WR | — | 6.00 Numbers |
| Total | 23 Numbers | |
Driving Motor as per Plasser Part No. HYS909X 160HA1T50/280 BAR Bosch Rexroth Par t No.A6VM160HA1T63WVZ Make: plasser, Bosch Rexroth. [ Rate of supply 24 units per Year , Commencement Time Allowed -1 Day ]
| Delivery Location | State | Quantity |
|---|---|---|
| ANYWHERE IN CR | — | 2.00 Numbers |
| ANYWHERE IN ECR | — | 1.00 Numbers |
| ANYWHERE IN ER | — | 8.00 Numbers |
| ANYWHERE IN WR | — | 13.00 Numbers |
| Total | 24 Numbers | |
Hydraulic Motor for cutting chain for BCM as per Plasser Part No. 62.05.2000.123, Bosc h Rexroth Part No.A6VM250HZ/63W2VZB027B Make: plasser, Bosch Rexroth. [ Rate of supply 3 units per Year , Commencement Time Allowed -1 Day ]
| Delivery Location | State | Quantity |
|---|---|---|
| ANYWHERE IN ECOR | — | 1.00 Numbers |
| ANYWHERE IN ER | — | 1.00 Numbers |
| ANYWHERE IN WR | — | 1.00 Numbers |
| Total | 3 Numbers | |
Hydraulic PUMP for cutting chain for BCM as per Plasser Part No. 62.05.2000.111 Bosc h Rexroth Part No.A2FO250/61LPZB020 Make: plasser, Bosch Rexroth. [ Rate of supply 9 units per Year , Commencement Time Allowed -1 Day ]
| Delivery Location | State | Quantity |
|---|---|---|
| ANYWHERE IN CR | — | 1.00 Numbers |
| ANYWHERE IN ER | — | 4.00 Numbers |
| ANYWHERE IN NFR | — | 2.00 Numbers |
| ANYWHERE IN WR | — | 2.00 Numbers |
| Total | 9 Numbers | |
Cutter chain Pump as per Plasser Part No. HYS704*90R/EP4/A350BAR(SUB) HY704*90R /EP/A350BAR, Bosch Rexroth Part No.A4VG90EP4D1/32RNZFO2F001-SH Make: plasser, Bosch Rexrot h. [ Rate of supply 7 units per Year , Commencement Time Allowed -1 Day ]
| Delivery Location | State | Quantity |
|---|---|---|
| ANYWHERE IN ER | — | 1.00 Numbers |
| ANYWHERE IN SER | — | 2.00 Numbers |
| ANYWHERE IN WR | — | 4.00 Numbers |
| Total | 7 Numbers | |
Hydraulic PUMP as per Plasser Part No. HY709X28L/DFR/S097 Bosch Rexroth Part No.A 10V028DFR31L Make: plasser, Bosch Rexroth. [ Rate of supply 3 units per Year , Commencement Time Allowed -1 Day ]
| Delivery Location | State | Quantity |
|---|---|---|
| ANYWHERE IN WR | — | 3.00 Numbers |
| Total | 3 Numbers | |
Hydraulic PUMP as per Plasser Part No. HY704X125L/EP/A- 210 BAR Make: plasser, Bos ch Rexroth. [ Rate of supply 4 units per Year , Commencement Time Allowed -1 Day ]
| Delivery Location | State | Quantity |
|---|---|---|
| ANYWHERE IN CR | — | 1.00 Numbers |
| ANYWHERE IN ECR | — | 2.00 Numbers |
| ANYWHERE IN WR | — | 1.00 Numbers |
| Total | 4 Numbers | |
Hydraulic PUMP as per Plasser Part No. 62.05.4000.363 Bosch Rexroth Part No.A11VO 60DRS/10RVSC62N00 Make: plasser, Bosch Rexroth. [ Rate of supply 4 units per Year , Commencement Time Allowed -1 Day ]
| Delivery Location | State | Quantity |
|---|---|---|
| ANYWHERE IN ECOR | — | 2.00 Numbers |
| ANYWHERE IN NFR | — | 2.00 Numbers |
| Total | 4 Numbers | |
PUMP as per Plasser Part No. 62.05.1000.374-A Make: plasser, Bosch Rexroth. [ Rate of supply 1 units per Year , Commencement Time Allowed -1 Day ]
| Delivery Location | State | Quantity |
|---|---|---|
| ANYWHERE IN NFR | — | 1.00 Numbers |
| Total | 1 Numbers | |
PUMP as per Plasser Part No. HY709X45L/DFR+28L/DFR/S097 Make: plasser, Bosch Re xroth. [ Rate of supply 1 units per Year , Commencement Time Allowed -1 Day ]
| Delivery Location | State | Quantity |
|---|---|---|
| ANYWHERE IN NFR | — | 2.00 Numbers |
| Total | 2 Numbers | |
PUMP as per Plasser Part No. 62.05.1000.402 B, Make: plasser, Bosch Rexroth. [ Rate of supply 2 units per Year , Commencement Time Allowed -1 Day ]
| Delivery Location | State | Quantity |
|---|---|---|
| ANYWHERE IN NFR | — | 2.00 Numbers |
| Total | 2 Numbers | |
PUMP as per Plasser Part No. HY720X145L/EPGU/21A, Make: plasser, Bosch Rexroth. [ Rate of supply 2 units per Year , Commencement Time Allowed -1 Day ]
| Delivery Location | State | Quantity |
|---|---|---|
| ANYWHERE IN NFR | — | 2.00 Numbers |
| Total | 2 Numbers | |
Hydraulic Pump for Additional Cutter chain as per Plasser Part No. 62.05.2000.112 Mak e: plasser, Bosch Rexroth. [ Rate of supply 1 units per Year , Commencement Time Allowed -1 Day ]
| Delivery Location | State | Quantity |
|---|---|---|
| ANYWHERE IN ECOR | — | 1.00 Numbers |
| Total | 1 Numbers | |
Vibration screen adj Pump as per Plasser Part No. 62-05-3000-572 Make: plasser, Bosc h Rexroth. [ Rate of supply 1 units per Year , Commencement Time Allowed -1 Day ]
| Delivery Location | State | Quantity |
|---|---|---|
| ANYWHERE IN ER | — | 1.00 Numbers |
| Total | 1 Numbers | |
Waste Conveyor & Ballast Distributor Drive Pump as per Plasser Part No. 62.05.4000.2 52 Make: plasser, Bosch Rexroth. [ Rate of supply 1 units per Year , Commencement Time Allowed -1 Day ]
| Delivery Location | State | Quantity |
|---|---|---|
| ANYWHERE IN ECOR | — | 1.00 Numbers |
| Total | 1 Numbers | |
Tripple PUMP as per Plasser Part No. 62.05.4000.296 Make: plasser, Bosch Rexroth. [ Rate of supply 1 units per Year , Commencement Time Allowed -1 Day ]
| Delivery Location | State | Quantity |
|---|---|---|
| ANYWHERE IN ECOR | — | 1.00 Numbers |
| Total | 1 Numbers | |
Hydraulic PUMP Motor as per Plasser Part No. 62.05.4000.254 Bosch Rexroth Part No.A 7VO55HD1/63RVZBO1 Make: plasser, Bosch Rexroth. [ Rate of supply 3 units per Year , Commencement Time Allowed -1 Day ]
| Delivery Location | State | Quantity |
|---|---|---|
| ANYWHERE IN ECOR | — | 3.00 Numbers |
| Total | 3 Numbers | |
Hydraulic Motor as per Plasser Part No.HY935.N16 Make: plasser, Bosch Rexroth. [ Rate of supply 1 units per Year , Commencement Time Allowed -1 Day ]
| Delivery Location | State | Quantity |
|---|---|---|
| ANYWHERE IN ER | — | 1.00 Numbers |
| Total | 1 Numbers | |
PUMP Motor Combination as per Plasser Part No. 62.05.1000.396A. Make: plasser, Bos ch Rexroth. [ Rate of supply 1 units per Year , Commencement Time Allowed -1 Day ]
| Delivery Location | State | Quantity |
|---|---|---|
| ANYWHERE IN ER | — | 1.00 Numbers |
| Total | 1 Numbers | |
Pressure reducing Valve as per Plasser Part No. HY55R-B, Make: plasser, Bosch Rexrot h [ Rate of supply 2 units per Year , Commencement Time Allowed -1 Day ]
| Delivery Location | State | Quantity |
|---|---|---|
| ANYWHERE IN ER | — | 2.00 Numbers |
| Total | 2 Numbers | |
Proportional Valve as per Plasser Part No. HYA16-RPE2-325.DSO728 Make: plasser, Bos ch Rexroth [ Rate of supply 2 units per Year , Commencement Time Allowed -1 Day ]
| Delivery Location | State | Quantity |
|---|---|---|
| ANYWHERE IN ER | — | 2.00 Numbers |
| Total | 2 Numbers | |
Distributor Conveyor Drive Motor as per Plasser Part No. 62.05.4000.34 Make: plasser, Bosch Rexroth [ Rate of supply 2 units per Year , Commencement Time Allowed -1 Day ]
| Delivery Location | State | Quantity |
|---|---|---|
| ANYWHERE IN ER | — | 2.00 Numbers |
| Total | 2 Numbers | |
Hydraulic Motor as per Plasser Part No. 62.05.2000.123 Make: plasser, Bosch Rexroth [ Rate of supply 2 units per Year , Commencement Time Allowed -1 Day ]
| Delivery Location | State | Quantity |
|---|---|---|
| ANYWHERE IN WR | — | 2.00 Numbers |
| Total | 2 Numbers | |
Hydraulic Pump as per Plasser Part No. HY706X78L/DR 150 BAR Make: plasser, Bosch Rexroth [ Rate of supply 4 units per Year , Commencement Time Allowed -1 Day ]
| Delivery Location | State | Quantity |
|---|---|---|
| ANYWHERE IN WR | — | 4.00 Numbers |
| Total | 4 Numbers | |
Variable Pump as per Plasser Part No. HY709X71(65)R/FBD+45R/FB Make: plasser, Bos ch Rexroth [ Rate of supply 4 units per Year , Commencement Time Allowed -1 Day ]
| Delivery Location | State | Quantity |
|---|---|---|
| ANYWHERE IN WR | — | 4.00 Numbers |
| Total | 4 Numbers | |
Pump as per Plasser Part No. HY712X60L/HD1/ D350+60L/HD1/D Make: plasser, Bosch Rexroth [ Rate of supply 1 units per Year , Commencement Time Allowed -1 Day ]
| Delivery Location | State | Quantity |
|---|---|---|
| ANYWHERE IN SWR | — | 1.00 Numbers |
| Total | 1 Numbers | |
Motor as per Plasser Part No. HY910X28/61W-VA B010 Make: plasser, Bosch Rexroth [ Rate of supply 1 units per Year , Commencement Time Allowed -1 Day ]
| Delivery Location | State | Quantity |
|---|---|---|
| ANYWHERE IN SWR | — | 1.00 Numbers |
| Total | 1 Numbers | |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
POP1-1-8.pdf
ATTACHMENT
POP2-9-16.pdf
ATTACHMENT
POP3-23-29.pdf
ATTACHMENT
consigneedetails-hydraulic.pdf
ATTACHMENT
ITC12.2.25.pdf
ATTACHMENT
GTC13.11.2024_1.pdf
ATTACHMENT
HandlingofWarrantyrejections12.11.2024.pdf
ATTACHMENT
on-lineBills.pdf
ATTACHMENT
irsconditions2025.pdf
ATTACHMENT
InstructionsForPlacingSupplyOrders
ATTACHMENT
Arbitration
ATTACHMENT
InstructionsforPlacingSupplyOrdersagainstRateContract-Revised.pdf
ATTACHMENT
AdditionalConditionsofContract-SettlementofDisputes1.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .