PROVISION OF JAFFERY WALL AT CERTAIN PLACES AND ADDITIONAL 5 15 AMPS SOCKET POINT WIRING AT CEB

Excavation in trenches not exceeding 1.50 m wide and not exceeding 1.50 m deep for foundation, shafts wells cesspit and getting out in any type of soil complete all as specified and directed.

Returning and filling soil in layers not exceeding 25cm thick each layer including spreading leveling watering and well ramming complete all as specified and directed.

Removal of surplus material (soils) to a distance not exc 50 m and deposited where directred at a level not exc 1.50 m above starting point complete all as specified and directed.

M&L Pre-cast PCC 1:3:6 type C1 (using 20 mm graded stone agg) cement concrete block masonry with solid blocks exc. 10cm in width and set in cement mortar 1:6 of any description complete all as specified and as directed.

M&L Cement Concrete Type C2 1:3:6 (using 40 mm graded stone aggregate) as in foundation, fillings, posts and mass,concrete complete all as specified and directed.

M&L Cement concrete 1:2:4 type B1 using 20 mm graded crushed stone aggregate as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed.

M&L 10 mm thick cement plaster in CM 1:6 on fair faces of brick work/concrete etc finished even and smooth without using extra cement complete all as specified and directed.

Material & Labour for applying two or more coats of exterior emulsion weather proof paint including priming coat of exterior primer over new surfaces complete all as specified and as directed.

Supply and fixing 23-24mm thick PVC jallies CNC machine cut as per the approved pattern and density of jallies 600 kg/m3 design as approved by Engr-in-Charge. The PVC Jallies shall be fixed with the help of screw/nut bolt of suitable size and numbers as decided by the Engr-in-Charge. PVC Jallies shall be fixed to the existing steel frame work after replacing of rusted steel including necessary welding work complete all as specified and as directed. Note: MS steel work will be measured and paid seperately

S & F MS angle iron Hand rails, fencing posts, flat iron including embeding in concrete and screwing etc. wind ties for roof including securing bolts, posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc., flat iron fillets (for securing wire mesh etc.) including necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.