Improvement of black spots and installation of warning sign boards at accident prone places and urban roads

Retro-reflectorised Traffic sign as per IRC-67-2012 Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67-2012 made of high intensity grade sheeting type-IV vide clause 801.3, fixed over aluminium sheeting 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. The Retro reflective sheeting shall be tested for a certificate fo having the sheeting tested for coefficient of retro reflection, daytime colour and luminance, shrinkage, flexibility, liner remova, adhesion, impact resistance, specular floss adn fungus resistance, 3 years outdoor weathering and its having passed these tests shall be obtained from International / Government Laboratory/Institute by the manufacturer of the sheeting and in case the certificate is obtained from international condition, it should be obtained from Indian conditon within 3 years of launching of product by the manufacture in abroad, Alternatively, a certificate conforming to ASTM specification (D 4956-09) on artificial accelerated weathering requirements from a reputed laboratory in India can be accepted provisionally. In such a situation, the Employer/Client, if so dedires, could seek for a performance guarentee which be released after receipt of certificate meeting the requirement of three years outdoor weathering of the sheeting as per IRC 67-2012. Legends, letters, numerals and borders etc should be as per MoRTH specification No-801.3.7. Proof of the same in form of government report shall be uploaded while quoting tender. (As per LKO SOR SI No-18, P-57) 60 cm Circular with diffinitation plate (20cm X 60cm) Speed limit (Excluding cost of GST).

60 cm equilateral triangle with definition plate (20cm X 60cm) (Excluding cost of GST).

45X90 cm (Left/Right) Two Way (Excluding cost of GST).

60 mm x 45 mm rectangular with diffinitation plate (20cm X 60cm). (Excluding cost of GST).

Stop Sign (Excluding cost of GST).

TRAFFIC SIGNS - SINGLE CHEVRON (SIGN BOARD) Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC:67 mad of high intensity grade sheeting vide clause 801.3, fixed cover aluminium shting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to th ground by means of properly designed foundation with M-15 grade cement conc. 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. (Excluding cost of GST).

Providing and applying tack coat with bitumen VG-10 using bitumen pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous surface cleaned with mechanical broom. For Speed table (Excluding cost of GST).

Providing and laying dense graded bituminous macadam with higher capacity batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 505 complete in all respects.complete in all respects. For Speed table (Excluding cost of GST).

Providing and laying bituminous concrete with higher capacity batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 percent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORT&H specification clause No. 507 For Speed table (Excluding cost of GST).