Special repairs to bldg. No MES-4 of 122 Inf Bn (TA) Madras at West hill, Calicut under AGE (I) Cannanore.Special repairs to bldg. No MES-4 of 122 Inf Bn (TA) Madras at West hill, Calicut under AGE (I) Cannanore.

Amount

Dismantling single layer Mangalore pattern tiles in roofing including tilting tiles all as specified and directed.

Dismantling of battens for tiles, shingles etc of any size including tilting fillets all as specified and directed.

Dismantling timber scantling 40 sqcm and over in section in any position unframed work all as specified and directed.

Providing, cement concrete (1:2:4) type B0 (using 12.5mm graded stone aggregate) in roof kerbs or mud stops, rounded or chamfered on edges all as specified and directed.

M&L for structural steel work in tubular trusses including special shaped washer, etc, complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade st-240 all as specified and directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as per manufacturers instructions as directed.

S&F Pre- painted galvatume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in ridge/valley gutter/roof covering/cladding to wall, fixed with self tapping screws as per manufacturers instructions as directed.

M&L for preparation of new or old untreated steel surfaces of any description not other wise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified & directed.

Dismantling wall and ceiling boards or insulation boards/slabs/blankets any thickness, including cover fillets all as specified and directed.

M&L for GI framework for seamless false ceiling (size of grid 605mm x 605mm) comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 mm and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exceeding 1.2 m length ) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre, suspended with hangers 6 mm dia (up to 1200 mm length) GI wire of suitable length adjusting level fixed to roof by means of ceiling cleats made out of GI Flat 40x3mm size 60mm long and expansion hold fastner 12.5mm dia, 40mm long complete all as specified and directed

S&F 4 mm thick non asbestos fiber cement building boards fixed to GI frame work as per manufacturers instructions as in ceilings flat or sloping complete all as specified and directed.

M&L for preparation of new non AC ceiling board surfaces with 3mm thick Birla white putty finished the surface even and smooth and applying two coats of oil bound distemper over a coat of primer all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floors and pavings not exceeding 15cm thickness (below or above ground level) and removing debris outside MD land all as directed.

M&L 25mm thick PCC 1:2:4, Type B1 (using 20mm graded stone aggregate) as in flooring and finished fair and even all as specified and directed.

M&L for coloured joint free non-skid rectified ceramic tiles, 7mm to 8mm thick, area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured / white cement to match laid over and including 15mm thick screed bed or bedding layer in cement mortar (1:4) all as specified and directed.

M&L for coloured glazed ceramic tiles 300x200x7mm thick, as in skirting / dado, set and jointed in neat cement slurry and pointed in coloured / white cement to match laid over and including 10 mm thick backing on stone/brick masonry surfaces in cement mortar (1:4) all as specified and directed.

M&L for hard core of guage n.exc 63mm broken stone or boulders, deposited, spread and levelled in layers n.exc 15cm thick watered and rammed to a true surface all as specified and directed

M & L for 100 mm thick plain cement concrete 1:4:8, type D2 using 40mm graded aggregate as in sub floors, sub bases finished even and rough to receive the topping layer all as specified and directed.

M&L for Machine pressed precast concrete interlocking paver block approved colour, design and pattern confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment as in foot path, lawn, drive ways etc made by table vibratory method using PU mould, including 50mm thick compacted bed of fine sand compacting and proper embedding, laying of paver block into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand all as specified.

Taking down chowkats with shutters any description n exc. 1.5 Sqm each (without taking off shutters from the frame) all as directed.

Taking down chowkats with shutters any description exc. 1.5 Sqm but n.exc 4 Sqm each (without taking off shutters from the frame) all as directed.

M&L solid PVC door frame of sizes 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, all as specified and directed.

S&F factory made solid PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain coloured PVC “C” channel having a PVC sheet strip of 20mm width stock inside with solvent cement for stiles and plain colour PVC sheet for top rails, lock rails and bottom rails on either side and as gap insert for top rail & bottom rail on either side and as gap insert for top rail and bottom rail, paneling of plain colour of PVC sheet fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement etc. Details as peer specification and drawings and all as directed.

M&L for mild steel flat iron of size 25 x 3mm for holdfasts for securing new wooden frames and similar articles conforming to Fe-290 Gde-E-165 all as specified and directed.

M&L for PCC 1:2:4, type B1 using 20mm graded stone aggregate for fixing hold fast, coping, bed block etc including necessary form works all as specified and directed.

M&L for second class hardwood, plain, solid straight chowkats & frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints all as specified and directed.

S&F 30mm thick second class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc; (with out sash bars), edges of framing, fitted with cut and mitered beads for securing glass, etc sizes of members of shutters as specified in SSR Part-I, Section 8, Clause 8.24 (a) all as specified and directed.

M&L for second class hardwood, panelled shutter 30mm thick (two panel) with lock rail and panel of 9mm BWP, 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated all as specified and directed.

S&F 4mm thick frosted glass, ordinary quality and glazing with oil putty in squares not exc 0.50 Sqm in each pane all as specified and directed.

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples all as specified and directed.

S&F stainless steel butt hinges medium weight; 100mm size as per IS 21817 fixed with stainless steel screws all as specified.

S&F 200mm long aluminum anodized barrel tower bolts of extruded section fixed with stainless steel screws all as specified.

S&F extruded aluminum alloy anodized handle fabricated type 150mm size fixed with stainless steel screws all as specified.

S&F aluminium anodised sliding door bolts 300mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified and directed

S&F Floor door stopper Overall length of cover plate 150mm of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor etc complete all as directed.

S&F in repairs Harrison rails 25mm dia, anodised aluminium alloy with fixing brackets , stops, rollers etc. all as specified and as directed.

S&F 500 litres capacity rotational moulded polthylene water storage tanks(cylindrical vertical with closed top) of make Sintex/Polycon/Plasto hoisted and fixed in position including taking down unserviceable water tank all as specified in SSR Part I,2009 and directed.

S & F Powder coated aluminium (minimum thickness of powder coating shall be 50 micron) frame work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P.brass/stainless steel screws, all complete as per the directions of Engineer-in-Charge.

S & F Powder coated aluminium (minimum thickness of powder coating shall be 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Cost of fittings shall be measured and paid separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per the directions of Engineer-in-Charge.

S & F anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge.

S&F ball brass valves, high pressure, with polyethylene float and fly nut complete, screwed for iron pipe or brass ferrule of 25 mm bore dia all as specified and directed.

Taking up or down steel tubing and connecting including cleaning for removing to store of sizes upto 25mm bore all as directed.

S&F for 15mm bore UPVC pipes of pressure rating 10 kgf / cm2, fixed complete to walls, ceilings or in floors etc. all as specified and directed.

S&F for 20mm bore UPVC pipes of pressure rating 10 kgf / cm2, fixed to wall/ceiling or on floor all as specified and directed.

S&F for 25mm bore UPVC pipes of pressure rating 10 kgf / cm2, fixed to wall/ceiling or on floor all as specified and directed.

Dismantling of cast iron or RCC drain pipes 75 or 100mm dia, jointed in cement mortar and taking out of trenches or wall all as directed.

Taking down LDPE pipes of any desciption and 32mm dia all as directed.

M&L PVC (SWR) pipe type 'B' 75mm bore single socketed with solvent cement joints laid in trenches or in floors all as specified and directed.

M&L PVC (SWR) pipe type 'B' 75mm bore single socketed with solvent cement joints fixed to wall all as specified and directed.

M&L PVC (SWR) pipe type 'B' 110mm bore single socketed with solvent cement joints laid in trenches or in floors all as specified and directed.

M&L PVC (SWR) pipe type 'B' 110mm bore single socketed with solvent cement joints fixed to wall all as specified and directed.

S&F PVC (SWR) vent cowl, 110mm bore all as specified and directed.

S&F 75 mm bore, PVC (SWR) bend with access door any radius all as specified and directed

S&F 110 mm bore, PVC (SWR) bend with access door any radius all as specified and directed

M&L for 110mm diameter PVC (SWR) branch piece single T equal or unequal including jointing with solvent cement all as specified and directed.

M&L for 110mm diameter PVC (SWR) branch piece single T equal or unequal including jointing with solvent cement all as specified and directed.

M&L PVC (SWR) Gully trap 125/110mm setting and jointing with solvent cement as in repairs complete all as specified and as directed.

S&F grating square 150mm size of PTMT complete all as specified and as directed.

S&F in repair 75mm PVC SWR floor trap plain with grating including jointing with solvent cement complete all as specified and as directed.

Cutting chases for concealing water tubing and making good, in stone or concrete block or slab or walls, cutting not exc 10cm girth complete all as specified and as directed.

S&F in repairs Vitreous China Wash down water closet pan (Pedestal pattern) white, (excluding flushing cistern and flush type) pedestal pan and trap including connection to drain (or outgoing pipe) and to flushing pipe, anti syphonage pipe, etc complete including plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminized hinging device all as specified and directed.

S&F in repairs PVC valveless, syphonic action type flushing cistern low level, 10 Litre capacity, white, with inlet, ball valve, float and handle including low or high density PVC flush pipe all as specified and directed.

S&F mild steel chromium plated Health faucet (ABS body), suitable for 15mm dia pipe with flexible LDPE pipe with jet of 1.25m long on one end and socket joint of 15 mm dia on other end including ABS wall hook complete all as specified and directed.

S&F in repair Vitreous China Wash basin, white, flat back, size 630 x 450 mm, including CI brackets, (but excl. pillar tap) cutting for and pinning in ends of brackets or erecting stand etc complete all as specified and directed.

S&F Stainless steel sinks 1mm thick with plugs, washers and waste; including bedding in cement mortar on to dwarf walls, or including fixing cantilever brackets and connecting union to waste pipe, overall size 495mm x 420mm, bowl size 410 x 330 x 160mm etc complete all as specified and directed.

S&F 15mm pillar taps, fancy type, cast copper alloy with capstan heads, chromium plated , screwed down high pressure ,with or without lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipe and fixed all as specified and directed.

S&F 32mm Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed all as specified and directed.

Supply and fix PVC connecton 60cm long with PTMT nuts for flush tank, wash basin, etc. all as specified and directed

S&F in repairs bib tap 15mm dia, chromium plated, fancy type, cast copper alloy, screwed down, screwed for iron pipe or ferrule and complete all as directed.

S&F in repairs stop cock 15mm bore cast copper alloy, chromium plated, fancy type, screwed both ends for iron pipe or for unions and screwed down, high pressure with long shank & cup complete all as specified and directed

S&F in repairs stop cock 25mm bore cast copper alloy, chromium plated, screwed both ends for iron pipe or for unions and screwed down, high pressure with long shank & cup complete all as specified and directed

S & F in repairs brass chromium plated shower rose 125 mm dia suitable to 15mm bore pipe complete all as specified and as directed.

M & L PTMT Shower arm 15 mm size , 195 mm long with bend of 45 degree with flange, any colour (mininmum weight 40gms) complete all as specified and as directed.

S&F tubular towel rail brass, chromium plated, D type, 60cm long between flanges fixed to wall with wooden plugs with chromium plated brass screws all as specified and directed.

M&L for cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section ) in cement concrete 1:2:4, type B-1, using 20 mm graded stone aggregate, smooth finished, and reforming benching as required, internal dia of pipe in 100 mm all as specified and directed.

S&F in repairs Aluminium Hat pegs, solid body, 125 mm to 175 mm long complete all as specfied and directed.

S & F in repairs Aluminium wardrobe hooks (single) 50mm to 60mm complete all as specified and as directed.

S&F in repairs Soap dish, chromium plated brass, any shape, fixed to wall with plugs and screws complete all as specified and as directed.

S&F PTMT Towel Ring (min. weight 90 gms) fixed with and including CP brass screws and wooden/plastic cleats complete all as specified and as directed.

M & L in repairs for 12mm thick particle board , medium density, flat pressed, three layer with BWR type adhesive, fixed with screws to timber frame work complete all as specified and directed by Engineer-in-Charge

S&F mild steel Continuous (piano) hinges, , bright finish or electrogalvanised with width of flaps (When open) 40 mm fixed with screws to timber frame work complete all as specified and directed by Engineer-in-Charge

S&F in repairs stainless steel plate rack of 1mm thick (for kitchen), of overall size not less than 90cm x 90cm x 20cm of standard pattern/ design and weight not less than 6.50 Kg each all as specified and directed.

S&F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed by Engineer-in-Charge

Taking down cement or cement lime plaster on brick/stone walls or in ceiling surfaces incl racking out joints hacking for key scrubbing down with water etc and removing rubbish outside MD land all as specified and directed.

M&L for rendering 15mm thick in cement mortar (1:6) on stone masonry surfaces, finished even and smooth without using extra cement all as specified and directed .

M&L for rendering 15mm thick in cement mortar (1:4) on stone masonry surfaces, finished even and smooth without using extra cement all as specified and directed .

M & L for preparation of newly plastered surfaces of wall and applying 3mm thick acrylic wall care putty and making the surface smooth and even including sanding each layer to receive next new layer, one coat of wall primer and applying two coats of oil emulsion distemper and all as specified and as directed.

M & L for preparation of newly plastered surfaces of wall and applying two coats of Acrylic Smooth exterior paint of approved shade (1.67 ltr/10 sqm) overapriming coat of exterior primer applied @ 2.20 kg/10 sqm complete all as specified and directed.

M&L preparing new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel painting over a coat of pink primer all as specified and directed.

Demolition of brick or stone / boulder masonry built in cement or cement lime mortar, including all quoins, arches, pillars etc. but excluding ashlar facings, dressed stone work and pre cast concrete articles and removing debris outside MD land all as directed.

M&L for providing pre-cast cement concrete block masonry with solid blocks, exc.10cm in width with PCC (1:3:6), type C1, using 20mm graded stone aggregate and set in cement mortar (1:6) complete all as specified and directed.

M&L for Cutting openings through walls for door, window and other openings or enlarging existing openings, etc., or cutting out defective masonry for underpinning including providing fixing and removing, shoring, cleaning and stacking stone and removing surplus to store and rubbish off the premises old masonry built in cement mortar all as specified and directed.

M&L forming jambs, etc., to openings with stone including cutting, toothings and properly bonding into old work including facing and pointing (if necessary) to match existing work, new work built in cement mortar 1:6 complete all as specified and directed.

M & L for making good under cills (or over arches, lintels and bressummers) including all pinning as necessary built in cement mortar 1:6 complete all as specified and as directed.

M&L Reinforced cement concrete (1:2:4), type B1, (using 20mm graded stone aggregate) nominal mix as in kitchen slab supported on wall all as specified and directed. Note : Reinforcement and form work shall be measured and paid separately.

M & L for formwork to soffits of rough finished surfaces of flat suspended slabs such as cooking platform not exceeding 200mm thick (Horizontal or sloping) complete all as specified and as directed.

M & L for formwork to rough finished surfaces of edges of concrete flats, horizontal or sloping and similar work n.exc 5cm but n exc 10cm wide complete all as specified and as directed.

S&F CRS (TMT) bars 10 mm dia and over as in reinforcement, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia or securing with clips all as specified and directed.

Taking down carefully copper/aluminium point wiring of light, fan, socket or power socket complete, including fittings such as switches, ceiling roses, pendants, regulators, sockets etc. and making good disturbed surfaces of walls, floor ceiling etc. all as directed

M&L Point wiring complete with 1.5 Sq mm single core PVC insulated unsheathed copper conductor FRLSH cable multi stranded 1100 Volt grade drawn through and including non metallic rigid PVC conduit concealed to wall and fixed to ceiling/roof etc with necessary fixing accessories such as bend elbow socket etc with fixing material including terminal box made out of 1.22mm thick MS sheet concealed in wall covered with laminated sheet top cover of 3mm thick cadmium plated screws with cup washer including 1.5Sqmm single core PVC insulated un sheathed copper conductor FRLS cable multi stranded 1100Volt grade as earth continuity conductor green in colour connected to common earth dolly complete all as specified and as directed for One light/fan/bell point controlled by one switch. Note : (a) wiring shall be done by using colour code ie. Red, Yellow, Blue and earth wire shall be green colour. (b) Cutting chases for fixing conduit shall be measured and paid seperately.

All as per item No 101 here in before but for One 3 Pin, 5 Amps socket on same board with other switches all as specified and directed.

All as per item No 101 here in before but for One 3 Pin, 5 Amps switch socket combination on independent board all as specified and directed.

All as per item No. 101 on here in before but for one 3 pin 15 amp switch socket combination on independent board with 2.5Sqmm unsheathed PVC insulated copper conductor FRLSH cable including 2.5 Sqmm PVC insulated copper cable for earth continuity conductor complete all as specified.

Cutting chases on wall of width 30mm and depth 35mm for concealing PVC conduit 20/25mm dia and making good the surface with plastering in cement mortar 1:4 and finish to match the existing surface and treated with existing treatment such as white wash/OBD/cement base paint etc complete all as directed.

All as per item No 105 here in before but width 50mm all as directed.

S & F switch piano flush type, single pole, one way, 5 Amps, 240 volt including connecting up electrically complete all as specified and as directed.

S & F PVC ceiling rose round shape, three terminals, polycarbonate, isolated body including connecting up electrically all as specified and as directed.

S & F switch socket combination, 5pin 5/6 Amps, multipurpose, flush type, non-interlocking type, including connecting up electrically complete all as specified and directed.

S & F switch socket combination, 2 in 1, 5 &15 Amps, multipurpose, flush type, non-interlocking type, including connecting up electrically complete all as specified and directed.

S & F socket 5pin 5/6 Amps, multipurpose, flush type, non-interlocking type, including connecting up electrically complete all as specified and directed.

S & F switch bell push, flush type, 240 Volts, single pole, 5 Amps including connecting up electrically all as specified and directed.

S& F calling bell electric AC 240V, single pole, ding dong type and connecting up electrically all as specified and directed.

Taking down carefully ceiling fan with down rod, complete after disconnecting electrically and depositing to MES store complete all as directed.

M&L for clamps made out of flat iron (duly painted with enamel paint over red oxide primer) of 40 mm x 4 mm duly bolted with double nuts and washer on existing wooden beams of approx size 300 x 200 mm with and inclusive of fan down rod of 0.5 to 1.5 metre length duly fitted on MS clamps with bolts,nuts with safety pin and twin core twisted multistranded copper flexible wire of size 23/0.0076 from ceiling rose to fan complete all as specified and directed

S & F sheet metal enclosure factory made for MCB DB, SPN 8 way with 200 Amps bus bar, 240 Volt, double door type, fixed/flushed on wall including electrically connecting up and taking down old unserviceable DB complete all as specified and directed.

S & F sheet metal enclosure factory made for MCB DB, TPN 4 way with 200 Amps bus bar, 440 Volt, double door type, fixed/flushed on wall including electrically connecting up and taking down old unserviceable DB complete all as specified and directed.

S & F MCB SPN, 240 Volt, 40Amps including electrically connecting up using wiring lugs all as specified and directed.

S & F MCB SP, 240 Volt, 6 to 32Amps including electrically connecting up using wiring lugs all as specified and directed.

S & F MCB TPN, 415 Volt, 10KA, C curve, 16 to 32Amps including electrically connecting up using wiring lugs all as specified and directed.

M & L for earthing complete with galvanized steel earth plate electrode 60cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.5m below normal ground level connected to galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron connected to earthing test point, main DB, panel board, continuous earth lead protected by 15mm bore GI pipe light grade, 20mm bore GI light grade pipe for watering, necessary excavation and earth work in any type of soil, PCC pit, RCC chamber cover with suitable reinforcement complete all as shown on electrical plate No 3 of SSR part-I of 2009 all as specified and directed. Note :- Rate quoted shall deem to include for GI earth and GI pipe lead upto 7.5m length.

Taking down unserviceable fluorescent tube light fittings, S & F LED light fittings 1x20W, 220V AC decorative box type with driver holder including LED tube light with all accessoried internally prewired and including connecting up with twin core twisted copper flexible conductor cable of sutibale size all as directed.

Taking down unserviceable fluorescent tube light fittings, S & F LED light fitting, mirror type, high output diffuser 2 feet, 10W, 220V AC decorative box type with driver holder including LED lamp with all accessoried internally prewired and including connecting up with twin core twisted copper flexible conductor cable of sutibale size all as directed.

S&F in repalacement LED ball type lamp 10watt all as directed.

M&L for sub main wiring with two runs of single core 6 Sq mm copper conductor FRLS cable, PVC insulated, unsheathed multistanded, 1100 V grade drawn through and including non metallic rigid PVC all accessories such as bend,elbow,socket,tee saddles etc fixed concealed to wall / fixed to ceiling etc including 4 Sq mm single core copper conductor FRLS cable PVC insulated, unsheathed multistranded 1100 V grade as earth continuity conductor connected to common earth dolly complete all as specified and directed. Note :- 2 runs of 6 Sq mm and one run of 4sqmm copper cable and one run of PVC conduit will be measured as one length.

Supply and fixing LED street light fittings of 10 watts bulk head luminaries including LED light driver of HAVELLS or CG or Philips and electrically connecting up three core flexible conductor cable of suitable size all as directed.

S&F stepped type electronic fan regulator, flush type, 200W, SP, 230V connecting up electricallyall as specified and directed.

S&F in repalacement lamp holder, PVC/poly carbonate type with back plate suitable for batten fitting all as directed.

S&F ceiling fan of size 1200mm sweep, 230V, SP, AC, BEE three star, min air delivery 210CFM complete with and including down rod, blade connecting up electrically from ceiling rose to fan with 3 core, 0.50 sqmm flexible, copper cable complete all as specified and directed.

LAKSHMI BUILDERS

M-TECH ENGINEERS

JEETH CONSTRUCTION