SPECIAL REPAIRS TO ALUMINIUM DOORS WINDOWS BUILDING NO T 50 (MORTUARY) PROVN OF SEPTIC TANK 50 USERS SOAKAGE WELL FALSE CEILING AND PARKING SHED AT MH AGRA UNDER GE (WEST) AGRA

Amount

Excavating in trenches not exc 1.5m wide and not exc 1.5m in depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes etc n.exc. 10sqm on plan and getting out in hard/dense soil complete all as specified and directed.

Removing excavated material (soils) out side the MOD land all as specified and completed.

Returning, filling in, inluding spreading, levelling, watering and well ramming in layers not exc 25cm in hard/dense soil completeall as speceified and directed.

M&L for cement concrete 1:2:4 , type B-1 (using 20 mm graded mechanically crushed stone aggregate) as in benching in manholes, coping plinth courses, bands stopts etc including necessary use & waste of form work complete all as specified and directed.

M&L for PCC (1:4:8) type D-2 (using 40mm graded mechanically crushed stone aggregate) as in foundation of manhole complete all as specified and directed.

M&L for RCC (1:2:4), type B-1 (using 20mm graded mechanically crushed stone aggregate) as in precast slab for covers of manholes including necessary use & waste of form work and placing of manholes cover in position complete all as specified and directed.

M&L for brick work, with sub class 'B' bricks, straight or curved on plan exc 6 m mean radius built in cement mortar 1:4 using old size bricks complete all as specified and directed.

M&L for TMT bars of 10mm dia and over, dia cut to length bent to shape required including cranking bending spirally, hooking ends and binding with mild steel wire not less than 0.9 mm dia(annealed) complete all as specified and directed. (Note - The payment shall be made only after placing of cover on manholes)

M&L for cement plaster 15mm thick on fair faces of brick work in cement mortar (1:4) and finished even and smooth without using extra cement complete all as specified and directed.

M&L for coventional RCC septic tank for 50 users as per TD drawing No. LZ/C-TD/750 Sheet 1/2 & 2/2 dated 21 Mar 2018 (Revised up to 17 Jan 2019) complete all as specified and directed.

M&L for Soakage well of size 1.2m dia x 3M as per TD drawing No. LZ/C-TD/576 Sheet 1/2 & 2/2 dated 16 Jun 1989 complete all as specified and directed.

Supply and laying salt glazed stone ware drain pipes 150 mm dia (internal ) grade 'A' laid in trenches and jointed in cement mortar 1:1 including testing complete all as specified and directed.

M&L for plain cement concrete (1:4:8), type D-2 (using 40 mm graded stone aggregates) as in concrete bed to drain pipes of 150 mm bore laid to falls in trenches in any depth including packing under and haunching against the sides of pipes after the pipes are laid and tested complete all as specified and directed.

Taking down Aluminium chowkats or frame with shutter (Without taking off shutters from the frame) not exc 1.5 Sqm each complete all as specified and directed.

Taking down Aluminium chowkats or frame with shutter (Without taking off shutters from the frame) exc 1.5 Sqm but not exc 4.00 Sqm each complete all as specified and directed.

S&F powder coated (50 micron) aluminium door/window/vetilator frame and side/top hung or sliding shutter complete and fixed with fittings, one or more rebates including jointing cleat, glazing clips, rubber neoprene packing, aluminium snap beading, screws, anodised aluminium fittings etc. complete all as specified. Note: (i) Sheet glass and particle board, hinges, lock, handle, floor spring, hydraulic door closer will be measured and paid separatly (ii) Aluminium door frame with shutters shall be fixed in position in brick wall opening as required according to site conditions including all fastening arrangemennts etc complete all as specified and directed. (iii) The gap shall be sealed externally with Polysulphide sealant and finished flush with the surface

S&F 4.80 mm thick tinted sheet glass with rubber packing & aluminium snap beading complete all as specified and directed. Note: Neoprene beading & aluminium beading included in the item No. (16) above.

S&F 12mm thick prelaminated particle board, exterior grade prelaminated one side with decorative choice lamination & other side balancing white lamination complete fixed with aluminium snap beading in aluminium door complete all as specified & as directed. Note: Note: Aluminium snap beading included in the item No. (16) above.

S&F double action floor spring hydraulically regulated made up to minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless still cover, governing pivot made of brass, other parts made of mild steel heavy duly complete all as specified and directed.

M&L for aluminimum grill with aluminimum anodised or power coated mesh of size 50 mm X 50 mm with squre tube (solid) 6 mm thick complete all as specified.

S&F 150mm size aluminium alloy, anodised handles, cast type complete all as specified and directed.

S&F 100mm size aluminium alloy, anodised handles, cast type complete all as specified and directed.

S&F mortice lock of size 100 mm, 04 levers to existing aluminium door complete all as specified and directed.

Taking down and repair Aluminium door by replacement of screws, bolts and door pivot, spring for proper function and refixing the same complete all as specified and directed.

M&L in repair aluminium grill with aluminium anodised 15 micron, mesh of size 50mmx50mm with square tube (solid) 6mm thick complete all as specified.

S&F in repair 4.80 mm thick tinted sheet glass with rubber packing & anodised snap beading complete all as specified and directed. Note: Note: Aluminium snap beading will be paid under the item No. (16) above.

S & F in repair 4.80 mm thick figured glass, pin headed type and glazing with oil putty in squares not exceeding 0.5 Sq. M in each pane complete all as specified and directed. Note: Note: Aluminium snap beading will be paid in the item No. (16) above.

S&F in repair 12mm thick prelaminated particle board, fixed with aluminium snap beading in aluminium door complete all as specified & as directed. Note: Note: Aluminium snap beading will be paid in the item No. (16) above.

S&F in repair mortice lock of size 100 mm, 04 levers to existing aluminium door complete all as specified and directed.

S&F in repair double action floor spring hydraulically regulated made up to minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duly complete all as specified and directed.

S&F GI frame work for seamless ceilling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15mm each and web of 45mm seuspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasterner with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connection clips across the intermediate channel at 457 mm centre to centre complete all as specified & as directed.

M&L for 6 mm thick non asbestos fibre cement building board fixed in ceiling inserted to GI frame work with screw all as specified and directed.

Excavation in post holes (or similar holes) each n exc. 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering and removing surplus soil to a distance n. exc 50m and making good surface complete all as specified & as directed.

M&L for cement concrete 1:3:6, type C-2 (Using 40 mm graded stoneaggregate) in foundations, filling and mass concrete complete all as specified & as directed.

S&F roof trusses (framed), trussed, purlins, prop, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. confirming Fe-410-W(Gde-E-250) quality-B and painted one shop coat of zinc chromate primer paint (including preparation of surface) at contractors workshop before fabrication complete all as specified & as directed.

S&F for rolled section as joist, channel, angle or tee section, fixed independently, without connection plates, etc (cut to ordinary lengths i.e. within 20 mm of the length indicated) etc conforming to Fe- 410w complete all as specified & as directed.

S&F for plate (plane or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment etc conforming to Fe- 410-w complete all as specified & as directed.

S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified & as directed.

M&L for preparation of new or previously untreated steel surfaces over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified & as directed.

Demolition of brick masonary including all necessary arches, pillars, quions etc built in cement mortar complete all as specified & as directed.

M&L for brick work with sub class ‘B’ bricks old size, straight or curved on plan exc 6 M mean radius, built in CM 1:6 complete all as specified & directed.

Taking down wooden roof trusses, coupled rafters or trussed beams above 4 Mtr upto 8mtrs complete all as specified & as directed.

S&F for rolled section as in main and cross beams, purlins, rafters where connected to common rafter and running rails etc conforming to Fe- 410-w complete all as specified & as directed.

S&F of mild steel screw bolts of diameter of neck 16 to 20 mm (machine made ) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut length of bolt exc 22.5 cm and n exc 30 cm long complete all as specified & as directed.

Dismantling of Asbestos cement (corrugated, semi corrugated, etc.) sheets in roof coverings complete all as specified & as directed.

S&F Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified & as directed.

Taking down chowkhat or frames exc 1.50 Sqm n.exc 4 Sqm (without taking down shutters from the frames) complete all as specified & as directed.

S&F factory made Solid PVC Moulded Door Shutter with Particle Boarde core, 28 to 30 mm thick (stiles), with 2,4 or 6 raised panel design with 2 mm thick Moulded PVC sheet on the front face & 2 mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing including 3 Nos stainless steel hinges , 100mm long , 2 Nos aluminium handle 150mm long , 2 Nos aluminium sliding door bolt 250mm long and 2 Nos aluminium tower bolt 200mm long fixed to each shutter complete.

S&F of factory made wire gauzed PVC door shutter 28 to 30 mm thick (style) consisting of wire gauze in lieu of PVC sheet panel inside stiles and rails and decorative PVC beading of 10mm x 10mm (900) frame made out of MS tubes for top & bottom rails.The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be stretched to tighten firmly. MS frame shall be covered with heat moulded decorative colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and wood grain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, suppling & fixing in the frame at site as per specification & drawing in SSR Part II, including 3 Nos stainless steel hinges, 100mm long, 2 Nos aluminium handle 150mm long and 2 Nos aluminium tower bolt 200mm long fixed to each shutter complete. Make : Rajshree/Sintex

Taking down chowkhat or frames but not exc 1.50 Sqm (without taking down shutters from the frames) complete all as specified & as directed.

S&F factory made UPVC white colour sliding window opening area n exc 2.00 Sqm, three track made of extruded profiles with wall thickness of 2.3mm (+ 0.2 mm). Window profile with hollow section with multi chamber. Frame (88mmx52mm), sliding sash 42mmx67mm). Sliding mesh sash (42mmx57mm), sliding interlock (one vertical length in each shutters) (45.5mmx28mm), glazing bead (24.5mmx16mm) will be mitered cut and fusion welded at all corners including railing of holes for fixing hardware and drainage of water etc, making arrangement for fixing of hardware, EPDM gasket, 1.2+ 0.2mm thick galvanised steel frame (30mmx18mm) 2Nos , sliding sash (30mmx18mm). Sliding mesh sash (26mmx10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mmx100mm long fasteners. Hardware : Touch look of zink alloyed (White powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note - The unit rate quoted by contractor excluding cost of glass and including all other connected accessories. Net opening will be measured for payment purpose)

S&F 3mm thick sheet glass ordinary quality and glaxing with oil putty in square n.exc 0.5 Sqmin each pane complete all as specified & as directed.

S&F pressed steel door frame of size 125x60mm with one or more rebates incl necessary fixing lugs, hinges, lock and strike plate etc complete all as specified & as directed.

M&L for PCC 1:3:6. type C-1 (using 20 mm graded stone aggregate) as in back filling of pressed steel door frames complete all as specified & as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and directed.

M&L for (350mm x 250mm x 7mm / 450mm x 350mm x 7mm thick ) coloured glazed ceramic tiles in vertical surface set and jointed in neat cement slurry and pointed with white or coloured cement mixed with pigments over 15mm thick rendering in CM 1:4 complete all as specified and directed.

Taking down cement plaster on brick or conc surfaces including racking out joints hacking for key, scrubbing down with water etc complete all as specified & as directed.

M&L for 15mm thick rendering in CM 1:6 on any faces of brick or concrete surfaces of walls & finishing the surface even and smooth complete all as specified and directed.

M&L for preparation of new plastered surfaces ansd applying two coats of oil bound distemper over a coat of chalk whiting complete all as specified and directed.

M&L for preparation of wall plastered or unplastered old surfaces and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed.

M&L for washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 White cement: 1/2 coarse sand: 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified (Payment for providing grooves shall be made separately)

Forming grove of uniform size 15 mm wide and 15 mm deeep in the top layer of washed stone grit plaster as per approved pattern using wooden battens nailed to the under layer including removal of wooden battens repair to the edges of panels and finishing the groove complete as per specifications and directed.

M&L for preparation of new plastered or un-plastered surfaces and applying two coats of cement base paint on wall over a coat of priming paint complete all as specified and directed.

M&L for preparation of plastered or unplastered old wall surfaces and applying two coats of cement base paint over a priming coat complete all as specified and directed.

Dismantling wall and ceiling boards (Fiber, pulp, insulation, blankets) any thickness including covered fillets and supporting members fixed with screws complete all as specified and directed.

Demolition of cement concrete in ground floor and pavings n.exc 15cm thick below or above ground level complete all as specified and directed.

M&L for 25mm thick PCC (1:2:4), type B-0 (using 12.50mm graded crushed stone aggregate) as in sub base for laying floor finishes complete all as specified and directed.

M& L for machine cut kota stone slab flooring 20 to 25 mm thick over cement screed 1:4, 15 mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L kota stone slab 20-25 mm thick in riser of steps, skirting, dedo and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L for marble tiles 20 mm thick machine cut in laid over cement screed 1:4, 15mm thick, and jointed with grey cement slurry including cutting and polishing of type Makrana Doogri Adanga complete all as specified and directed.

M&L for PCC1:3:6, 75mm thick, type C-1 (using 20mm graded crushed stone aggregate) as in plinth protection laid in alternate pannels finished even and smooth without using extra cement complete all as specified and directed.

M&L for granite (of any type) slab 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing types complete all as specified and directed.

S&F framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc. complete drilled for fixing of steel sheeting or other covering. Doors, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel, sheeting or other covering running rails and guides) and hanging also fastening and fixing confirming Fe 410 W (Grde-E-250) quality B all as specified and directed.

S&F in repair 18/19 mm thick pre laminated partical board interior grade one side with decorative choice lamination and other side balancing white lamination as in pelmet box, cup board shutter or in narrow width n.exc 15 cm each including fixing 6mm thick teak wood beading on edges & ficed with screw and clip complete all as specified.

S&F in repair 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified and directed.

S&F in repair continous (Piano) hinges 30mm, mild steel, finish or electrogalvanised complete all as specified and directed.

S&F ball catches with 8mm dia steel ball and brass body and striking plate including letting in complete all as specified and directed.

S&F in repair Rotational moulded polyethene water storage tank 1000 ltr capacity, tripple layer, hoisted and fixed in position with threaded and locking system lid incl 20mm dia ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe 20 mm dia (minimum weight - 210 gm) complete all as specified and directed.

Taking up or down 15mm bore steel tubing and connection complete all as specified and directed.

Taking up or down 20mm bore steel tubing and connection complete all as specified and directed.

S&F 15mm bore steel water tubing, medium grade, galvanized including fittings and fixed to walls, ceilings, floors or laid in floors complete all as specified and directed.

S&F 20mm bore steel water tubing medium grade galvanized including fittings and fixed to walls, ceilings, floors or laid in floors complete all as specified and directed.

S&F in repair 20mm dia gun metal, globe or gate valve with wheel head including fixing to steel pipe 20 mm complete all as specified and directed

S&F in repair PVC connection 15mm size with PTMT nuts, 600 mm long complete all as specified and directed

S&F in repair vitreous china wash hand basin, white, flat back size 550x400 mm (bowl type ) excl taps but incl brackets, CP waste coupling, waste pipe, CP grating complete all as specified & directed.

S&F in repair 15mm wash hand basin mixture with long sunk, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and directed.

S & F in repair tubular towel rail brass chromium plated 20 mm dia with brackets type fixed with and including chromium plated brass screws and wooden/plastic cleats complete all as specified and directed.

S&F in repairs 75 mm dia of outlet CI floor trap, with grating including jointing to waste pipe fixed in cement concrete (1:2:4), type B1(using 20 mm graded stone aggregate) complete all as specified and directed.

S&F in repairs soap dish stainless steel, approximate size 160x160x90mm complete all as specified and directed.

S&F in repair 100 mm round PTMT grating with openable flap (Min weight 100 gms) complete all as specified and directed.

S & F in repairs 15 mm bore chromium plated fancy bib (Lab) taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repair 15 mm bore CP two way angle/stop valves, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified & directed.

S & F in repair 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to trench or in floor complete all as specified and directed.

S & F in repair 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to trench or in floor complete all as specified and directed.

S & F 75 mm bore PVC (SWR) bends of any radius complete all as specified & directed.

S&F in 110 mm bore PVC (SWR) tee of any radius complete all as specified & directed.

S&F in repairs PVC (SWR) junction, double equal or unequal 110mm dia complete all as specified and directed.

S & F 110 mm bore PVC (SWR) bends of any radius complete all as specified & directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendents, regulators, sockets, lamp holders, light fitting etc removing materials to store for keeping in safe custody for taking credit or reuse serviceable fittings/fixtures and making good the disturbed surfaces of wall/floors complete all as specified and directed.

M&L for Point wiring in concealed conduit with 1.5 Sqmm PVC insulated flame retardent low smoke (FRLS) single core stranded copper conductor for one light/fan/bell point in and including PVC conduit 19/20 mm dia to be terminated in pressed steel terminal boxes with 3 mm thick bakelite sheet top cover including 1.5 sqmm PVC insulated "Flame Retardent Low Smoke"( FRLS)" single core stranded copper earth continuity conductor controlled by one switch and/or one regulator and making good the disturbed surface complete all as specified and directed. (Wiring shall be made as per colour code in IS for Phase, neutral and earth)

All as per Item No. (102) above but for One socket outlet 5/6 Amps on independent board controlled by one switch.

All as per item no (102) above but for One socket outlet 5/6 Amps controlled by one switch on same board with other switches

All as per item No (102) here in before but for one socket out let 15/16 Amps controlled by one switch on independent board and wiring with 2.5sqmm cable.

S&F switch piano flush type single pole, 5/6 Amps one way, 230 volts, complete all as specified and directed.

S&F switch piano flush type single pole, 15/16 Amps one way, 230 volts, complete all as specified and directed.

S& F socket outlet 5/6 Amps flush type piano 5 pin 230 volts complete all as specified and directed.

S&F socket outlet 15/16 Amps multipurpose 3 pin 230 V complete all as specified and directed.

S&F ceiling rose surface bakelite 62.5 x 25 mm size 3 terminals complete all as specified and directed.

Supply & Fixing lamp holder, insulated body, with back plate suitable for batten fitting complete all as specified and directed.

Supply and fixing LED Bulb 15 watt suitable for lamp holder complete all as specified and directed complete all as specified and directed.

Supply and fixing electronic steping up type ceiling fan regulator suitable to operate at 230 volts, 50 Hz, AC supply complete all as specified and directed..

S&F in replacement sheet metal enclosure with socket plug top, single pole and neutral enclosure with two pin and earth plug and socket complete with one No MCB, SP, 20 Amps, 230 Volts, 10KA 'C' series complete all as specified and directed.

Supply & fix in replacement surface/wall mounting LED batten 20 watt luminaire having polycarbonate housing and integrated electronic driver with mounting accessories complete with lamp holders fixed to wall/ ceiling with fixing accessories and connecting up with & including twin twisted copper flexible wire of size 0.75 sqmm from ceiling rose to fittings complete all as specified & directed. Make:- Havells cat part No-LUMILINEBS20WLED865SPCWH or equivalent Model of Philips/Bajaj/CG as approved by GE.

Supply & fix in replacement, surface/ ceiling mounting type 34 watt LED luminaire PLUTO NEO PENAL 2X2 environmental friendly new generation aesthetically altra modern recess mounting with high brightness SMD LEDs as light source with reflector cover electronic driver, connector block etc with internally prewired fixed to ceiling with fixing accessories and connecting up with & including twin twisted copper flexible wire of size 0.75 sqmm from ceiling rose to fittings complete all as specified & directed. Make:- Havells cat part No- PLUTONEO2X2PLR34WLED857S or equivalent model of make, Philips/Bajaj/ Crompton Greaves as approved.

Supply & fix in replacement, outdoor street light LED 30 watt luminaire white powder coated with extruded grey aluminium housing and robust construction with reflector cover pre anodised and flat white high transmission acrylic cover or toughened glass, natural white type with electronic driver, connector block etc with internally prewired fixed to building with and including 1.20M long bracket made out of 40mm dia light grade GI pipe bent to shape & providing clamps 2 Nos made out of 50 x 6 mm Flat iron/MS clamps & 12mm dia bolts, nuts & washers etc and connecting up with & including twin twisted copper flexible wire from ceiling rose to fittings complete all as specified & directed. Make:- Havells cat part No- SL30WLED757SASYBOPC or equivalent as approved.

Taking down care fully sub main wiring / service connections of any size including batten/ conduit, and making good the disturbed surfaces of wall/ floor complete all as specified and directed.

M&L sub main wiring of two single core PVC insulated unsheathed stranded copper conductor cables of size 4 Sqmm, 1100 volts grade drawn through and including 20mm dia PVC concealed conduit of 1.2 mm wall thickness including all fixing accessories, and 2.5sqmm PVC insulated stranded copper conductor cable as earth wire(green colour) connected to earth dolly and making good the disturbed surface complete all as specified and directed. (Phase-Red, Neutral – black in colour of cable) Note:- Both running cables including earth wire, conduit shall be measured & paid for as single length.

Taking down distribution boards any size any type including MCB TPN/SPN/SP etc and making good the disturbed surfaces complete all as specified and directed.

S&F MCB DB sheet metal enclosure triple pole and neutral 230 V with 200 Amps standard bus bar of suitable size and common neutral link and earth bar all enclosed on standard steel sheet flush mounting type double door factory fabricate complete without MCB and with encosure blank plates for unused way suitable for 4 way double door in wall complete all as specified and directed.

Supply and fix MCB DB sheet metal enclosure factory fabricated double door SPN 4 way with 200 amps rated bus bar 240 volts complete all as specified and directed.

S & F MCB, 63 Amps, TPN, 230 volts,10 KA rupturing capacity 'C, series complete all as specified and directed.

Supply & fix MCB SPN, 40 Amps, 'C' series, 240 volts, 50Hz, 10kA complete all as specified & directed.

S & F MCB 6 to 40 Amps SP, 240 Volt C, series complete all as specified and directed.

M & L earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm size, buried directly in ground (earth pit not less than 2.25 M deep below normal ground level) with top edge of the plate not less than 1.5 M below normal ground level connected to and including galvanised steel earth lead wire of 4 mm dia, including 15 mm bore GI light grade protection pipe upto 1 Mtr above the floor level of the buildings where main switch, DB etc, situated, earth lead wire connected to the earth plate by means of GI bolts, nuts, washers and earth plate surrounded by 150 mm thick alternate layers of charcoal or cock dust mixed with common salt 20 mm bore medium grade GI watering pipe PCC pit in PCC 1:3:6 type C-1 (using 20 mm graded stone aggregate) cover of precast RCC 1:2:4 type B-1(using 20 mm graded stone aggregate) duly reinforced with 8 mm formed or twisted bars @ 100 mm c/c both ways, GI wire mesh, GI sheet funnel necessary excavation in soft/ Looose soil and deposited the surplus soil to a distance not exceeding 50 mtr away from starting point, all as per electrical plate no:3 of SSR part-1 .

Supply laying and testing cable XLPE insulated screened PVC bedded galvanized steel strip or wire armoured electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 25 sqmm 4 core complete all as specified and directed.

Excavation in trenches in soft/loose soil n.exc 1.50M wide and not exc. 1.50M in depth for foundation etc or for shafts, wells, cess pits, manholes etc area n exc. 10 Sqm on plan and n. exc 1.5 in depth and getting out complete all as specified and directed.

Supply & laying reinforced precast concrete cable cover, class LV, type-I, flat, size 250 mm x 150 mm x 40 mm for cable protection complete all as specified & dirrected.

M&L for sand cushioning dry, fine for cable cushioning 8 cm below the cable and 15 cm above duly punned down to 18 cm over all complete all as specified & directed.

Supply and fix 'Medium Grade' galvanised iron tubes with all fittings such as tees bends elbow etc laid in trenches of 25 mm bore complete all as specified and directed.

Excavation in trenches not exc 1.5m width and n. exc 1.5m in depth and getting out for laying of pipes etc in any type of soil complete all as specified and directed.

Removing excavated material n.exc 50m and depositing where directed at a level n. exc 1.5m above starting point complete all as specified and directed.

Attar Singh and Sons

M/s Rahul Kumar Agrawal