PROVN OF SIX TOILETS AND FOUR BATHROOMS WITH SEWAGE TANK AND OVERHEAD WATER TANK AT J AND B SUB AREA UNDER

Amount

Boring holes 300 mm dia of pile, 4 m deep in soil for Single under reamed piles and getting out and disposal of soil to a distance of n.exc 50m complete all as specified and directed.

Excavation in trenches not exc. 1.50 m wide and not exc. 1.50 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exc. 10 Sqm on plan and getting out in soft / loose soil complete all as specified and directed.

Surface dressing not exc. 15 cm deep as in soft / loose soil complete all as specified and directed.

M&L for sand filling under floors or in foundation laid in layers n. exc 15 cm thick spread ,levelled and rammed including watering and consolidation as required complete all as specified and directed.

M & L for PCC 1:4:8, type D-2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.

M & L for brick work with sub class ‘B’ old size bricks straight or curved on plan exc. 6.00 m mean radius built in cement mortar 1:4 complete all as specified and directed.

M&L Brick work with sub class "B" bricks, straight or curved on plan to any radius in half brick thick wall in CM (1:4) complete all as specified & directed.

M & L for 40mm thick damp proof coarse of cement concrete 1:2:4 type B-0 (using 12.50 mm graded stone aggregate) to horizontal or vertical surface including necessary form work complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick in each layer as in soil complete all as specified and directed.

Removing surplus excavated material (SOIL) to distance not exc. 50 m and depositing where directed at a level not exc. 1.50 m above the starting point complete all as specified and directed.

M & L for Hardcore of gauge exc. 63 mm but not exc. 100 mm, deposited, spread and leveled in layers not exc. 15 cm thick, watered and rammed to a true surface using broken bricks complete all as specified and directed.

M & L for providing reinforced cement concrete M-25 (Design Mix) using 20 mm graded stone aggregate as in foundation including rafts, footing, foundation beams, plinth beams, bases for columns, basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M & L for providing reinforced cement concrete M-25 (Design Mix) using 20 mm graded stone aggregate as in columns, pillars, piers, posps and struts complete all as specified and directed.

M & L for providing reinforced cement concrete M-25 (Design Mix) using 20 mm graded stone aggregate as in beams, cantilevers, bressummers, lintels over 1.5 m sapn and like complete all as specified and directed.

M & L for providing reinforced cement concrete M-25 (Design Mix) using 20 mm graded stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and like complete all as specified and directed.

M & L for providing reinforced cement concrete M-25 (Design Mix) using 20 mm graded stone aggregate as in Chajjas and like complete all as specified and directed.

Use and waste of formwork to sides of concrete foundation, footing, bases of columns, raft & raft beams, sides and soffits (if any) of foundation and plinth beams; and similar works; in rough finished flat surface of concrete complete all as specified and directed.

Use and waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions in rough finished surface of concrete complete all as specified and directed.

Use & waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs etc. also splayes between floors and beams in rough finished flat surface of concrete complete all as specified and directed.

Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar works not exc. 200 mm thick horizontal or slopping in rough finished flat surface of concrete complete all as specified and directed.

Use and waste of formwork to chullah hoods, chajjas, troughs and similar items including edges in rough finished flat surface of concrete complete all as specified and directed.

Use and waste of formwork to edges of concrete flats, sides of RCC slab, RCC / PCC bends in walls or similar work thickness exc. 10 cm and not exc. 20 cm in rough finished surfaces of concrete complete all as specified and directed.

M & L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

~Ditto~ all as per item No 23 above but 6 to 8 mm dia, for spacers or for distribution bar

~Ditto~ all as per item No 23 above but 5 mm over upto and including 10 mm dia in stirrups.

M & L for rendering 15 mm thick in cement mortar 1:4, in two layers (1st layer 10 mm thick rendering coat and 2nd layer 5 mm thick finishing coat) on brick work or concrete surfaces, second layer (finishing coat) mixed with liquid water proofing compound @ 200 ml / 50 Kg bag of cement as per manufacturer's instructions and finished the surfaces even and fair without using extra cementcomplete all as specified and directed. Note : Liquid WPC will be measured and paid separately.

Supply only liquid water proofing compound complete all as specified.

M & L for 15 mm thick rendering on fair faces of brick /concrete surfaces of wall in CM (1:6), finished even and smooth without using extra cement complete all as specified and directed.

M & L for 10 mm thick rendering on fair faces of brick /concrete surfaces of ceiling / chjja in CM (1:3), finished even and smooth without using extra cement complete all as specified and directed.

M&L for prepartion new plastered surface of wall and applying two coat of cement base paint a coat of cement primer complete all as specified & directed.

M&L for Prepration of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified & directed.

M&L for Prepration of new plastered surfaces of wall and applying three coats of white wash complete all as specified & directed.

M&L for prepartion new steel or iron surfaces of any description,not otherwise decribed, exc 10 cm width or girth and applying two coat of synthetic enameled paint over a coat of red oxide primer complete all as specified & directed.

M & L for 75 mm thick cement concrete1:3:6 type C-2 using 40 mm graded stone aggregate as in plinth protection laid to slop of 1:12, finished surface even and fair without using extra cement with and including all necessary form work to divide the area in panels, finishing exposed edges fair or rounding or chamfering where directed and providing 6 mm thick joints through out the thickness of plinth protection duly filled with mastic filling (one part of hot bitumen 85/25 and three part of fine sand by weight) complete all as specified and directed.

M&L 75 mm thick Cement concrete Type C2, 1:3:6 using 40 mm graded aggregate as in sub base floor finished evevn & fair complete all as specified and directed.

M&L 25 mm thick PCC 1:2:4 type B1 (20mm graded stone aggregate) as in floor and finished rough to recive the floor tiles etc. complete all as specified and directed.

S&F Steel ventilator with top hung shutter including, hinges, peg stay, completev all as spd and as directed

S&F Mild steel framed works such as grills,gratings,etc, with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; etc conforming to Fe 290 Gde -E-165. complete all as specified and directed

S & F solid PVC door frame of size (50 mm x 47 mm) made out of 5 mm plain colour PVC sheet reinforced with M.S square tube supplying & fixing in opening as per specified & drawing complete all as specified and directed.

S&F shower rose chromium plated with swivel joints of size 125mm cast copper alloy CP, fancy type with CP neck 9" long made to shape complete all as specified and as directed.

S & F 30 mm thick (style thickness) factory made solid panel PVC shutter consisting of frame made out of mild steel tubes for top and bottom rails, mild steel frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles and rails with suitable PVC sheets beading and joined together with solvent cement as per specification and drawing given on MES schedule Part – II (2010) complete all as specified and directed.

S & F of hold fast for door ckowkats and other similar small steel article conforming to Fe – 290 Gde E -- 165 complete all as specified and directed.

M & L for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate for insertion of hold fast including necessary formwork etc. complete all as specified and directed.

S&F 4 mm thick sheet glass, ordinary quality, and glazing with oil putty in square n exc 0.50 sqm in each pane, complete all as specified and directed.

S&F, Aluminium hinges (ISI marked), medium weight of size 100 mm complete all as directed

S&F 150 mm long aluminum anodised barrel tower bolts of extruded section as specified.

S & F aluminium handle, cast type anodised 150 mm long

M&L for non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc. set and joining in neat cement slurry and pointed in coloured cement to match with shade of tiles , including laid over 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed .

M&L for glazed ceramic coloured tiles (Digital pattern) of size 300x450mmx 6 to 7 mm thick as on walls set and jointing in neat slurry and pointing in coloured cement to match the shade of tiles including 10 mm thick rendering in cement mortar (1:4) complete all as specified and directed.

M & L for Water proofing treatment on "Non approachable / non accessible roof" surface (Horizontal & Vertical surfaces) in following sequence through manufacturer / authorized applicator of the manufacturer all as specified and directed complete

(i) Properly cleaning & drying the concrete surfaces.

(ii) Applying a coat of oxidised bitumen based solvent primer @ 0.3 Kg / Sqm.

(iii) Applying evenly a tack coat of industrial bitumen 85/25 grade @ 1.2 kg/ Sqm incl cleaning surfaces.

(iv) Laying unrolled over the bitumen coated surface, polymeric water proofing membrane Hyperplas standard wt not less than 3kg /Sqm with 100 mm over laps shall be sealed by flame as per manufacturers instruction.

(v) Applying a coat of bituminous aluminium paint @ 100 gm/ Sqm over & incl a coat of hot air blown grade bitumen of grade 85/25 @ 1.2 kg/ sqm duly sanded over polymeric membrane.

M&L for screed bed 15 mm thick in cement mortar 1:4 on concrete surfaces with liquid water proofing compound @ 200 ml/50 kg per bag of cement or as per manufacturar instruction finished even and smooth without using extra cement over roof slab complete all as specified and directed. NOTE: water proofing compound shall be measured and paid seperately

S&F 15mm dia tubes, 'medium grade' galvanised, with all fittings and fixed complete to walls and ceilings or laid in trench / floors complete all as specified and as directed.

~Ditto~ all as per item No 52 above but 20 mm bore

~Ditto~ all as per item No 52 above but 25 mm bore

Supply and fixed Vitreous China wash basin white flat back size 450x300 mm including bracket, cutting for and pinning the ends of brackets or erecting stands also including brass chromium plated waste coupling 32mm dia,PVC flexible wastepipe of adequate length and dia and PVC connection 15mm size 450 mm length with brass CP nuts on both sides, complete all as specified.

S&F pillar taps cast copper alloy with capstan head chromium plated screwed down, high pressure with or without lettered ‘Hot’ or ‘Cold’ with long screw shank and fly nut screwed for iron pipe of 15 mm bore complete all as specified.

S & F 15 mm dia bib taps chromium plated, long body, cast copper alloy fancy type with capstan head screwed down, screwed for iron pipe or for brass ferrule complete.

S &F 15 mm dia stop valve chromium plated cast copper alloy screwed down high pressure(concealed type) long shank and cup with capstan head screwed both ends for iron pipe or for union complete.

S & F 15 mm dia angle cock chromium plated cast copper alloy fancy type screwed down high pressure with capstan head screwed both ends for iron pipe or for union complete

S &F 15 mm dia stop valve chromium plated cast copper alloy screwed down high pressure long shank and cup with capstan head screwed both ends for iron pipe or for union complete.

S&F Gun-metal, globe or gate valves 20 mm, with iron wheel head, screwed both ends for iron pipe etc complete all as specified and directed.

S&F water closet white vitreous china ware Orissa pattern of size 580x440mm with integral foot rest ‘P’ or ‘S’ trap front or back inlet incl provision of PCC bedding type B1, 1:2:4 ( 20 mm graded aggregate) and connection pipes ( excluding flushing cistern but including flushing pipe 32 mm dia MS chromium plated)

S&F PVC valve less, syphonic action type flushing cistern of 10 ltr capacity, low level with inlet, ball valve, float and handle including brackets incl PVC connection 600 mm long with CP brass nuts on both sides complete all as specified and as directed.

S&F Vitreous china half stall urinal size 345X 320 x 560 mm ,white ,with grating and union for discharge pipe including PVC waste pipe and CP urinal spreader complete all as specified and directed.

M&L polished granite tiles 18-20mm thick machine cut , bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone incl grinding and polishing and incl 15mm thick screed bed CM 1:4 all as specified complete.

S&F 1000 ltrs capacity rotational moulded polythene water storage tanks (cylindrical vedrtical with colsed top) hoisted and fixed in position all as specified in SSR Part-I. complete all as specified and directed.

S&F ball valves high pressure of brass with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed of 20 mmdia (min weight-210 gms) complete all as specified and directed.

S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed on wall surface of any description complete as specified and directed.

~Ditto~ all as per item No 69 above but 75 mm bore

S&F PVC(SWR) bend 75 mm dia of any radius with access door etc fixed to PVC pipe complete all as specified and directed

S & F 75 mm bore PVC (SWR) Vent cowl complete all as specified and directed

M&L PVC (SWR) floor trap, plain with grating including jointing with solvent cement, 75 mm dia. outlet complete all as specified and as directed.

M & L for plain cement concrete 1:3:6 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.

M & L for plain cement concrete 1:2:4 (using 25 mm graded stone aggregate) as in surface channel or drain or benching in manhole complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement including forms, moulds, mitered / stopped ends etc. complete all as specified and directed.

Excavation over areas not exceeding 1.50 m deep and getting out in soft / loose soil complete all as specified and directed.

Excavation over areas exceeding 1.50 m deep but not exceeding 3.0 m and getting out in soft / loose soil complete all as specified and directed.

M & L for 12 mm thick rendering in cement mortar 1:3 on fair faces of brick work or concrete surfaces and finishing the surface even and fair complete all as specified and directed.

M & L for 150 mm bore salt glazed stoneware (SGSW) drain pipes grade 'A' laid in trenches and jointed in cement sand mortar 1:1 with spun yarn complete all as specified and directed.

M & L for 100 mm bore asbestos cement pipes as in vent pipe fixed to wall with clamp complete all as specified and directed.

M & L for 150 mm bore Reinforced cement concrete drain pipes NP-3 laid in trenches and jointed in cement sand mortar 1:1 with spun yarn complete all as specified and directed.

M & L for cement concrete 1:3:6 type C-2, using 40 mm graded stone aggregate as in bed to drain pipes of 150 mm bore including packing under and haunching against the sides of pipe after they are laid and tested complete all as specified and directed.

M & L for Point wiring with in repair PVC insulated PVC unsheathed electric FRLS cable 1100V grade single core having multi stranded copper conductor of size 1.5 Sqmm nominal cross sectional area in & including non metallic rigid PVC conduit ISI marked medium grade not less than 20mm dia with all conduit accessories in concilled wiring system by cutting of wall and making good disturbed surface of wall (cutting except on ceiling for fan point only, on ceiling PVC conduit surface will be used) & 1.5 sqmm green PVC insulated unsheathed copper conductor as a earth wire connected to earth dolly by providing lugs excluding MS boxes for mounting switches, sockets, fan regulators etc for one light/fan point controlled by one switch complete all as specified and as directed .

~Ditto~ all as per item No 84 above but One 5 pin 5 Amps switch socket out let point on the same board with other switches

~Ditto~ all as per item No 84 above but using pvc insulated unsheathed 2.5 sqmm cross sectional area cable for phase /neutral & for earth 1.5 Sq mm green PVC insulated cable for 15 amps socket point on independent board controlled by one switch.

Supply and fixing switch piano flush button single pole one way 5 amps, 230 Volts complete all as specified and as directed.

Supply and fixing switch piano flush button single pole one way 15 amps, 240 Volts complete all as specified and as directed.

S & F socket outlet flush type multipurpose 2 in 1, 5 pin 5 Amps 240 volts complete all as specified & directed.

S & F socket outlet flush type multipurpose 2 in 1, 3&5 pin 15 Amps 240 volts complete all as specified & directed.

Supply and fixing energy efficient exhaust fan of 230 mm sweep made of metal body ventil air - DS type complete with louver with bolts nuts and washers size of the bolt 15 cm long 12mm dia embedded in the wall including provision of PVC flexible copper cable of size 23/0.0076 two core from ceiling rose to exhaust fan for connection complete all as specified and directed. (Note : Cost of suitable opening in wall for fixing exhaust fan is deemed to be included in overall rate quoted).

Supply and fixing LED bulk head 10 watt fittings environmental friendly ultra modern energy saving surface mounted decorataive bulk head fitting with driver and prewired and necessary electric connection with PVC insulated twin twisted flexible copper wire of size 0.75 Sqmm complete all as specified and as directed. Make: Havell's Cat No: HEXAFT10WLED857 SSYMBOPC or equivalent model of Bajaj/CG.

S&F in LED tube light fitting batten type single tube 1x 18/20 watt 230 volt wall/ ceiling mounted luminaire industrial type made of sheet metal box type suitable for T- 8 tube complete with electric electronic driver and bipin holder including one no tube 18/20 watt fixed with wall/ceiling incl fittings accessories and connecting with all accessories internally pre wired and incl connecting up with twin core twisted flexible copper conductor cable suitable size all as specified. Make- Bajaj/Surya/ Havells / Crompton Greaves.

Supply and fixing ceiling rose surface bakelite 63.5mm dia three terminal, fixied complete all as specified and as directed.

S&F lamp holder insulated body with back plate for batten/ angular fitting complete all as specified & directed.

Supply and fix LED Lamp 7/8 watt complete all as specified and directed.

Supply and fixing Sheet metal enclosure for 8 way Distribution Boards (DB’s), double door, single pole and neutral with 200 amps rated bus bar, IP-20 protection suitable for fixing MCB"S/lsolators complete all as specified and as directed. Make : Legrand/Schneider/Siemens

Supply and fixing MCB SP 240 volts 5 to 32 Amps, 10 KA breaking capacity, 'C' type including connection complete all as specified and directed by Engr-In-Charge. Make : Legrand/Schneider/Siemens.

Supply and fixing MCB SPN 5 to 32 amps 10 KA, C-series including connection complete all as specified and directed. Make : Legrand/Schneider/Siemens.

Supply, laying, jointing & testing in trenches or passing through pipe, 1100 volts grade, XLPE insulated,FRLS screened, PVC bedded, galvanized steel strip or wire armoured LT electric power under ground cables, heavy duty with aluminium conductor of cross sectional area 10 sqmm 2 core with all fixing & connecting accessories such as Alluminium cable lugs, cable gland, nut, bolts, washer etc complete as specified and as directed. (Make:Havells/Polycab/KEI/MESCAB) (NOTE: Earthwork & Excavation, GI pipe brick protection etc shall be measured and paid separately under relevant items of this BoQ ).

Supply and lay dry river sand filling for under ground cable protection with a layer of 8cm deep before laying and 15cm covering above the top edge of cable after laying complete all as specified and as directed.

M & L for old size sub class ‘B’ bricks, laid in trenches as cable covers / protection complete all as specified and directed.

M&L for 40 mm bore steel tubing light grade ISI marked for protection of cable including necessary joints and fixed with MS clamp as required complete all as specified and as directed. Make: Tata/Jindal/Bansal

S & F 25 mm dia of bore brass ferrules (or connecting screws) screwed both end complete all as specified and directed

M/S SHOBHA CONSTRUCTIONS

HARINANDAN RAI SONS