Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹45.6 LAccepted-AOC | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹51.0 L+₹5.4 L (11.9%)Rejected-Finance NO 9 LAKSHMI NIVAS SOMASHETTAHALLI CHIKKABANAVARA POST BANGALORE 560 090 | BENGALURU URBAN | KARNATAKA | 560090 | L2 | Rejected-Finance Being not L1 | |
| 3 | L3₹56.3 L+₹10.7 L (23.5%)Rejected-Finance | L3 | Rejected-Finance Being not L1 | |
| 4 | L4₹58.2 L+₹12.6 L (27.5%)Rejected-Finance | L4 | Rejected-Finance Being not L1 | |
| 5 | L5₹58.2 L+₹12.6 L (27.7%)Rejected-Finance 15 MOULYA NMH LAYOUT 1ST STAGE CHIKKA BANAVARA POST BENGALURU 560 090 | BENGALURU URBAN | KARNATAKA | 560090 | L5 | Rejected-Finance Being not L1 |
Tender Value
₹56.8 L
EMD Value
₹1.1 L
Closing Date
11 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Neeraj Mehrotra, IDSE, CWE
Commander Works Engineers AF South Gangamma Circle Opp Guard Room 410 AFS Jalahalli Bangalore 560013
ADDN / ALTRN / IMPROVEMENT TO DSC MESS AND LIVING IN ACCN AT AF STN CHIMNEY HILLS
2022_MES_568204_1
82112/E8
Open Tender
Civil Works
Item Rate
180 days
AGE (I) (AF) Chimney Hills
As per tender documents
7 documents required · 7 mandatory
₹1,000
AGE (I) (AF) Chimney Hills
₹1.1 L
11 Mar 2023
9 Dec 2022
13 Jan 2023
9 Dec 2022
11 Jan 2023
6 Jan 2023
9 Dec 2022 - 20 Dec 2022
Amount
Demolition of concrete in ground floor and pavings not exc 15cm thickness (below above ground level) complete.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises.
Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed.
M&L for 75mm thick PCC 1:3:6 type C2 using 40mm graded stone aggregate as in plinth protection laid in panels, concrete finished even and fair to receive floor finishes all as specified and directed.
M&L screed bed or bedding layer of mortar 20mm thick in CM 1:6 for laying floor finishes complete all as specified and as directed
M&L for rendering 10mm thick in CM 1:4 on wall finished even and fair to receive wall tiles complete all as specified and as directed.
M&L for rubbing and polishing on machine cut kota stone slab flooring complete all as specified and directed
M&L for Glazed coloured ceramic tiles in vertical surfaces of size 350x250x6mm to 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match
M&L Non Skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but n;exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.
M&L Non Skid coloured ceramic tiles 7 to 8mm thick (squate/rectangular) area of each tile exceeding 0.18 Sqm but n;exc 0.38 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.
M&L Chequered cement concrete tiles with grey cement and pigment of size 20cm x 20cm x 25mm thick set and jointed in neat cement slurry in floors complete all as specified and as directed
M&L for 18-20mm thick Granite (on any type) work (table rubbed and polished ) in steps, jambs Pillars, window cills, cooking platforms and like in over and including 20mm thick cement screed 1:6 including pointing in white cemet (1:2) using marble dust wih admixture of pigment to match with shade complete all as specified and directed
Taking down chowkhats or frames with shutters of any decription n'exc 1.5 sqm each incl fittings and fixtures complete all as specified and as directed
Taking down chowkhats or frames with shutters of any decription exceeding 1.5 sqm but n'exc 4.0sqm each incl fittings and fixtures complete all as specified and as directed
Taking down shutters of any description ecx 1 sqm but n. exc 2.0 sqm each and and refixing in the same opening after necessary easing etc complete all as specified and directed
S&F for Pressed steel frames for doors with one or more rebates of size 125x60mm including necessary fixing lugs, hinges , lock strike plates, etc complete all as specified and directed
S&F for Pressed steel frames for doors with one or more rebates of size 105x60mm including necessary fixing lugs, hinges , lock strike plates, etc complete all as specified and directed
M&L Forming jambs with CM 1:6 to openings ( to foregoing item) including cutting, toothing and properly bonding into old work also facing, jointing and pointing to match existing work complete all as specified and directed
M&L for Cement concrete 1:2:4 type B0 using 12.5mm graded stone aggregate incl weathering slightly rounded or chamfered angles and throating as directed
S&F for Solid PVC door frame of size 50mmx47mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube, in opening as per specifications and drawing complete all as specified and as directed.
S&F for factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the M. S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the frame at site complete all as specified and as directed.
S&F 35mm thick factory made shutter of plain framed with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS :1003 (Part-I) kiln seasoned and chemically pressure treated
S&F Second class hard wood glazed and skelton door shutters, open rebated and prepared to receive glass guaze with sash bars divided into squares with plain chamfered mittered and rebated sash bars any numbers of 35mm thick shutters complete all as specified and directed.
S&F mild steel butt hinges 100mm long, medium weight cold rolled
S&F 200mm long Aluminium, anodised, barrel tower bolts of extruded section and fixed
S&F 150mm long Aluminium anodised barrel tower bolts of extruded section and fixed
S&F 150mm long extruded Aluminium alloy handles , fabricated type , anodised
S&F 300mm long Aliuminium alloy, anodised sliding door bolt, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section of cast-aluminium alloy and fixed.
S&F 140mm long floor door stopper of aluminium alloy body and tongue, anodised,with hard drawn steel spring, fixed in floor
M&L for droppery rod with Aluminium, tubular rail 20mm dia as in curtain rails, with fixing brackets, stops, rollers etc . Note brackets will be measured and paid seperately.
M&L for Aluminium anodised bracket powder coated or approved make for fixing dropery rod fixed in repairs
S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples.
S&F in repairs stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples.
M&L for Preparation of new surfaces of steel over 10cm width or girth and applying two coats of synlthetic enamel paint over a coat of red oxide primer complete.
M&L for preparation of wood or wood based material on any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed
S&F 18-19mm thick prelaminated plywood, grade 1 (with BW R resin) on both faces (outer face with choice colour and inner face with white colour) fixed to timber frame work as in kitchen cabinets and cupboards complete all as specified and directed.
M&L PVC edge banding tep 0.45mm thick 22mm width matching shade to lamination fixed with PVC fix adhesive to ply board veneered complete all as specified and as directed
S&F Stainless steel handles 100mm size for kitchen cabinet shutters
S&F Auto closing hinges 35mm of 0 crank (KH-001) or B crank (KH-002) openable at 110 degree for kitchen cabinet shutters.
Hacking out old broken glass ( any thicknes, size, qualityor description) from wodden/ metal frame including punching or drilling out old glazing pins/spring clips and providing new ones complete..
S&F 4mm thick sheet glass ordinary quality and glazing with oil putty in square n. exc 0.5sqm in each pane complete all as specified and directed
All as item No 41 here-in-before but ground or obscured or frosted on one side complete.
S&F Stainless steel sink, 1.00mm thick for kitchen or laboratory, with plug, waste pipe, washers, including cantilever cast iron brackets, connecting union etc.,overall size 800x800x300mm complete all as specified and as directed.
S&F in repair for vitreous china squatting pan, 'Orissa" pattern size 580x440mm white with integral foot rests (excluding flushing cistern and flush pipe) water closet (squatt pattern) complete including provision concrete bedding complete
S&F for vitreous china semi-pedestal pattern (Anglo-Indian type) (with wash down water closet ) pedestal pattern complete.
S&F for water closet seat, black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete.
S&F 10ltr PVC Valveless, syphonic action type, flushing cistern, low level, white with inlet, ball valve, float and handle inclusing brackets complete.
S&F in repair for vitreous china wash basin, angle back,size 550x400mm white, excluding taps, waste, chain and plug and porcelain stopper but including brackets or erecting stand but exclusive of fixing of supply and waste pipe complete.
S&F in repair PVC connection pipe 15mm dia with PTMT nuts of length 450mm
S&F in repair 15mm bore fancy type CP stop valves, with long shunk and cup cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, scsrewed both ends for iron pipe or for unions and fixed complete
S&F in repair 15mm bore long body CP bib taps cast copper alloy with crutch or butterfly handle, screwed for iron pipe or for brass ferrule and fixed complete.
S&F in repair 15mm bore Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete
S&F 15mm bore Two in One (Two way tap) Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete
S&F in repair Grating square 150 mm size of PTMT with waste hole of PTMT. (Minimum weight 100gms)
S&Fin repair Hand shower (Health faucet ) with 8mm dia 1 mtr long flexible tube and wall hook complete all as specified and directed.
S&F in repair Chromium plated shower roses of 125mm size with or without swivel joints, any size, including fixing to steel pipe or union complete
S&F 75m dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete
S&F in repair Vitreous China urinals, half stall (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brassscrews, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete.
Taking down 15mm bore steel tubing and connections including cleaning for re-fixing or removal to store complete.
Taking down 20mm bore steel tubing and connections including cleaning for re-fixing or removal to store complete.
S&F 15mm bore 'Medium grade' tubes, galvanised, with all fittiang and fixed complete to walls and ceilings or laid in floors all as specified and as directed.
All as item No here-in before but 20mm bore complete all as specified and directed
S&F 25mm dia Gunmetal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete.
Dismantling exc 250 n.exc 500 ltr capacity water tanks
Dismantling exc 500 n.exc 1000 ltr capacity water tanks
S &F rotational moulded polythene water storage tank, Three layered with antimicrobial coating 500ltr capacity (culinderical vertical with closed top ) hoisted and fixed in position and connecting the inlet and out let pipe etc complete all as specified and as directed.
S &F rotational moulded polythene water storage tank, Three layered with antimicrobial coating 1000ltr capacity (culinderical vertical with closed top ) hoisted and fixed in position and connecting the inlet and out let pipe etc complete all as specified and as directed.
Preparation of old decorated surfaces of wall and applying one coat of white wash on walls complete.
All as per item No 69 here-in before but on ceiling surfaces.
Preparation of old decorated surfaces of wall and applying two coats of cement base paint complete.
Preparation of old existing wood or wood based surfaces over 10cm width or girth and applying one coat of synthetic enamel paint complete.
Preparation of old treated surfaces of steel over 10Cm width or girth and applying one coat of synlthetic enamel paint complete.
M&L surface excavation in hard/dense soil n exc 30cm deep and averaging 15cm deep and getting out complete all as specified and as directed.
M&L 100mm thick PCC 1:4:8 type D2 using 40mm graded stone aggregate as in sub base including necessary form work complete all as specified and as directed.
M&L 75mm thick PCC 1:3:6 type C2 using 40mm graded stone aggregate as in floor finishes including necessary form work complete all as specified and as directed.
Excavating over areas, n exc 1.5 m deep and getting out in hard and dense soil complete.
M&L for PCC 1:3:6 type C-2 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specified.
M&L PCC 1:3:6 type C1 using 20mm graded stone aggregate as in coping including necessary form work complete all as specified and as directed.
M&L for walling of random rubble masonry, un coursed well bonded, bedded and solidly hearted built in CM 1:6 complete all as specified and as directed.
M&L for walling of squared rubble regular coursed well bonded, bedded and solidly hearted built in CM 1:6 complete all as specified and as directed.
M&L keyed pointing in CM 1:3 to random rubble or polygonal rubble masonry uncoursed or brought upto courses all as specified and as directed.
S&F 110mm dia PVC (SWR) pipes as in weep holes with including aluminium wire mesh one side pipe complete all as speficied and as directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not ex 25cm thick complete
Removing excavated material (soils) to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5m above the starting point, complete.
Excavating in post holes in hard/dense soil (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and directed.
M&L for cement concrete 1:2:4 type B2 using 40mm graded stone aggregate as in post holes complete all as specified and directed
S&F Compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc.Fe-410-W(Gde E-250)quality B complete all as specified and as directed.
S&F Rolled sections as in main and cross beams, hip and jack rafters; purlins, channels where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plate Fe-410-W(Gde E-250)quality B complete all as specified and directed.
Dismantiling of plain or corrugated steel sheeting, any gauge thickness including Nanital or similar pattern complete
S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and as directed.
S&F Plain, Aluminium sheeting, Alloy 31000 H4 0.56mm thick in ridges, hips, valley gutter, drip and straight flashing (length and girth as fixed) complete all as specified and directed.
S&F steel window/ventilators with side hung shutters incl box type hinges, with steel handle and steel peg stay complete with glazing bars, dovetailed or welded incl painting with one shop coat of red oxide primer all as specified and directed.
S&F steel window/ventilators with side hung shutters incl box type hinges, with steel handle and steel peg stay complete without glazing bars, dovetailed or welded incl painting with one shop coat of red oxide primer all as specified and directed.
S&F MS framedwork such as grills, gratings etc with ends of bars shouldered and/or rivited or forged in spikes, framed guard bars, barred iron doors, ledders framed balsters walk ways railings frame work of water tanks and similar work confirming to Fe-290, Gde-E-165 complete all as specified and as directed.
Pre-cast cement concrete 1:3:6 type C1 usnig 20mm graded crushed stone aggregate block masonry with solid blocks, exc. 10 cm in width and setting in mortar 1:6, complete
M&L Rendering 15mm thick CM 1:4 on stone masonry surfaces or surface other than fair face of brick work or concrete surfaces mixing integral water proofing compound @ 3% by weight of cement finshed even without using extra cement all as speciied and as directed
M&L Rendering 10mm thick CM 1:6 on fair faces of brick work or concrete surfaces of cement finshed even and smooth without using extra cement all as speciied and as directed .
M&L for prep of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of primer complete all as specified and as directed
M&L for prep of newly plstered surfaces of walls and applying two coats of Oil bound distemper over a coat of primer complete all as specified
M&L for 6mm thick PVC ceiling panel for fixing in 600mm x 600mm grid complete all as specified and directed.
S&F Stainless steel cold rolled ceiling grid 0.23-0.4mm thick frame work for false ceiling (Size of grid 595 x 595mm) all as specified and directed.
M&L for Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs or steel sections by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified
Demolition of cement concrete tiles, brick tiles or terracing tiles any description , single layer on roof including removal of existing water proofing membrane complete all as specified and as directed.
Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc
M&L for Brushing neat cement slurry with 3.0kg of cement per sq. metre complete all as specified and as directed.
M&L 50mm thick PCC 1:2:4 type B1(20mm graded stone aggregate) as in roof treatement complete all as specified and as directed.
M&L for 10mm thick cement plaster on concrete surface in CM 1:4 mixed with water proofing compound , finished the surface even and smooth with out using extra cement complete all as specified and directed.
Supply only integral water proofing compound
M&L for applying oil bound biltumen primer @0.20Kg/Sqm and providing 4mm thick APP modified water proofing membrane weighing not less than 4.0kg/Sqm reinforced with non woven polyester matt weighing not less than 160gm/Sqm having softening point not less than 150 degree centigrade, having tensile strength of 650N/5cm in longitudinal and transverse directions respectively of the reinforcement, tearing strength of 180N by torch on application including min 10cm side over lap & 15cm end laps and over the membrane finishing with solor reflective Bituminous aluminum paint @0.1kg/Sqm complete all as specified and as directed. Note The work shall be carried out only through manufacturer or their authorised applicator and a written gurantee for work shall be submitted by the contractor.
Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position exc 250 and n.exc 500 complete
All as per item No 111 here-in before but exc 500 and n.exc 1000 complete all as specified and directed.
Removing debris & excavated material , demolished concrete of any description out of defence land to a distance exceeding 1.50 km and not exceeding 5 km and depositing where directed. complete.
S&F in repairs 300mm, MS ordinary rat rail rod pattern springs including roller and roller plate complete.
M&L for Reinforced cement concrete type B1 1:2:4 (Noninal mix) (20mm graded aggregate) in Slabs supported on walls, lintels and in shelves and the like complete
Mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete
S& F Ball bearing runners 450mm telescopic (KTS-20) full extension load capacity 50Kgs complete all as specified and directed.
Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, all as specified and direcetd by engineer in charge .
M & L for Point wiring with 1.5 sqmm single core PVC insulated FRLS cable 1100 volts grade with copper conductor drawn in and incl with multi stranded copper conductor drawn through and including suitable size Non metalic regid PVC conduit and all conduit accessories (concealed) and including provision of 1.5 sqmm PVC insulated copper cable FRLS as earth continuity conductor fabricated branded Modular PVC Surface box concealed in walls with suitable Modular plate with outer cover with suitable screws for housing switches socket outlets fan regulators etc. all as specified and as directed for the following:-
(a) One light/Ceiling fan/ EF/Wall Fan controlled by one, one way switch
(b) One three pin socket outlet 5 Amp controlled by one, one way switch on independent board
All as per item No 118 herein before but with 2.5 sqmm and 2.5 sqmm as earth conductor on independent board for 15 Amp Socket.
All as per item No 118 herein before but with 4 sqmm and 4 sqmm as earth conductor on independent board for 15 Amp Socket for Geyser.
Supply and fix Modular switch 1 way 6A, 1 module with any one of Light/fan Marking/Indicator all as specified and directed by engineer in charge . .
Supply and fix Modular switch 1 way 16A, 1 module with indicator all as specified and directed by engineer in charge.
Supply and fix Modular Socket, 6A - 2/3 pin combined 2 module all as specified and directed by engineer in charge.
Supply and fix Modular Socket 6A/16A - 2/3 pin combined 2 module.all as specified and directed by engineer in charge.
S & F Modular Fan step regulator, ISI Marked 100W - 2 module.all as specified and directed by engineer in charge.
Supply and fix ceiling rose, ISI Marked, 3 Phase / PVC/ Polycarbonate, isolated body.
Supply and fixing LED lights fitting 1x 20 W, 220V,Lumen efficacy 110 Lumen / watt ,Total Lumen 2200 ,6500 K,Cool day light, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed by engineer in charge.
Supply and fixing LED lights fitting 1x 10W, 220V, Lumen efficacy 110 Lumen / watt ,Total Lumen 1100,6500 K,Cool day light ,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed by engineer in charge.
Supply and fix Single pole and neutral enclosure witha two pin and earth plug and socket complete with one single pole 20 Amp MCB all as specified and directed by engineer in charge.
S&F in replacement SPN distribution boards protection class IP-43 double door suitable for mounting MCB with Min 100 Amps rating bus bar SPN 08 way all as specified and directed by engineer in charge.
S&F in replacement SPN distribution boards protection class IP-43 double door suitable for mounting MCB with Min 100 Amps rating bus bar SPN 12 way all as specified and directed by engineer in charge.
S&F in Replacement distribution boards protection class IP-43 double door suitable for mounting MCB with suitable rating bus bar TPN 8 way all as specified and directed by engineer in charge.
Supply and fixing 415V 10KA 'B' curve miniature circuit breaker (MCB) of Four poles and current carrying capacity 63 Amp to 100Amps in the DB complete with connection testing and commissioning.
Supply and fixing 6 to 32 amp rating 240V, 10KA 'B' curve miniature circuit breaker (MCB) of Single pole and current carrying capacity in the MCB DB complete with connection testing and commissioning Note :- The rating of MCB for light / Power point will be decided by Engr-in-Charge based on the number of points in each circuit.
All as per item No 134 herein before but 'B' curve MCB of SPN 40 Amp
Supply and Fix RCCB, DP, 40 Amps AC type in accordance with IS:12640-1 and IEC-6100-1, suitable for 240 Volts, 50 Hz with 10 KA short circuit withstand capacity.
Removing of Ceiling Fan upto 1400 mm from site, Carrying to workshop and servicing, greasing/oiling parts including replacing cotter pin rubber ring shackle, check nut, bush/bearing of suitable sizes including re-assembling,Spray painting fixing in position and testing complete. all as specified and directed by engineer in charge.
Removing of Exhaust Fan upto 450 mm from site, Carrying to workshop and servicing, greasing/oiling parts including replacing cotter pin rubber ring shackle, check nut, bush/bearing of suitable sizes including re-assembling,Spray painting fixing in position and testing complete all as specified and directed by engineer in charge.
Supply and fixing LED street light fitting 35 Watt 230 V AC,Lumen efficacy 100 Lumen /Watt,Total Lumens 3500 , outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 66 protection complete all as specified and directed by engineer in charge.
M&L Submain Wiring alongwith earth wire with FRLS ,PVC insulated copper conductor, single core cable in surface as required 2 x 10 Sqmm + 1 x 10 Sqmm earth wire with PVC Conduit 32 mm dia all as specified and directed by engineer in charge .
M&L Submain Wiring alongwith earth wire with FRLS ,PVC insulated copper conductor, single core cable in surface as required 2 x 6 Sqmm + 1 x 6 Sqmm earth wire with PVC onduits 25 mm dia all as specified and directed by engineer in charge .
M&L Submain Wiring alongwith earth wire with FRLS , PVC insulated copper conductor, single core cable in surface as required 2 x 4 Sqmm + 1 x 4 Sqmm earth wire with PVC Conduit 25 mm dia all as specified and directed by engineer in charge .
Supply, laying and testing cable XLPE Insulated ,Armoured, PVC bedded, galvanized steel strip , electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16.0 sq mm 4 core including taking down old cable all as specified and directed by engineer in charge.
Excavation in trenches not exc 1.5 m wide and not exc 1.5 min depth for laying of UG cable and getting out in hard soil all as specified and directed by engineer in charge.
Returning, filling, including spreading, levelling, watering and well ramming in layers not exc 25 cm thick in any type of exacavated soil all as specified and directed by engineer in charge.
Removing excavated material to a distance not exc 50 m and deposited where as directed at a level not exc 1.5 m above the starting point all as specified and directed by engineer in charge.
Supply and laying bricks of size 230 mm x 115 mm x 70 mm, sub class 'B' laid dry flat perpendicular to axis of cable for protecting complete all as specified and directed.
Supply and Spread Natural Riddled soil in trenches for cushioning and covering to cable complete all as specified and directed by engineer in charge.
Supply and laying High density polyethylene pipes(HDPE) of 32 mm dia pressure rating 6 kgf/cm2 laid in trenches and fixed on poles all as specified and directed.
M&L in repair earthing complete with galvanised steel pipe electrode of size 40 mm bore,medium grade,2.5 meter length, burried directly in ground in bore 350 mm dia verticalIy to a depth not less 3.2 meter below ground level with top edge of the pipe not less than 60 cm below normal ground level connected to galvanised earth lead wire 4.0mm dia by means with bolts, nuts check nuts and washers protected by Gl light grade pipe of size 15 mm dia and connecting up with the DB as the case may be upto a maximum distance of 7.5m away from the earth electrode including test point junction, excavation, earthwork, PCC Chamber, RCC Cover(Yellow painted) with handle , watering pipe 20mm dia GI Medium grade with funnel and wire mesh, Charcoal dust , salt,Mild steel Earth marker with earthing result ,date all as per plate no.2 of SSR 1991 and as directed by Engineer in charge.Note:-Boring charges are included in the above quoted rates .
S& F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required : hooks (Stay), heavy, for large gates, hook and pintle hinges and similar small articles confirming to Fe-290 Gde-E-165 all as specified and directed.
LAKSHMI CONSTRUCTIONS
VARGHESECHACKO AND CO
S CHANDRASHEKAR (SREE BUILDERS)
Moulya Builders
SHREE JAGANNATH CONSTRUCTION
chowdeshwariconstructionco
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .