Repair incl replacement to various internal electrification works of various bldgs at Khalsar and other units under GE Partapur

Amount

Taking down carefully damaged copper/aluminum point wiring (light/fan/socket or power) complete including fixture and fittings such as switches, ceiling roses, cassing & capping, pendants, sockets, light fitting etc and making good disturbed surfaces of wall/roof complete all as specified and directed by Engr-in-Charge.

Taking down of existing sub main wiring any size complete all as specified and directed by Engr-in-Charge.

Taking down distribution boards, MCB DB/MCB of any type and removing from site complete all as specified and directed by Engr-in-Charge.

M&L Point wiring with 1.5 Sqmm (nominal area) copper conductor FRLS cable (multi-stranded) PVC insulated and unsheathed electric cable 1100 volts drawn through PVC casing and caping of suitable size (as per conductor run) with all fittings and accessories and including PVC insulated unsheathed electric cable 1100 volts 1.5 Sqmm (multi-stranded) copper conductor single core (green colour) as continuous earth wire connected to common earth dolly including 50mm deep box made out of 2nd class hard wood board of suitable size and shape and other boxes for mounting light fittings etc covered with 3mm thick plastic laminated Hylum ISI marked for following complete all as specified and directed by Engr-in-Charge. Note:- Screw used for fixing TW baords, casing and caping ceiling rose, square blocks etc should be nickel cadmium screws.

All as per item No 4 above but for one 3/5 pin switch-socket outlet, 5 Amps on the same board complete all as specified and directed by Engr-in-Charge.

All as per item No 4 above but for one 3/5 pin switch-socket outlet, 5 Amps on the independent board complete all as specified and directed by Engr-in-Charge.

All as per item No 4 above but for one call bell point controlled by one bell push on indepedent board complete all as specified and directed by Engr-in-Charge.

All as per item No 4 here-in-before but for one 15 Amp 6 pin switch socket outlet, independent, with 4 Sqmm single core stranded copper conductor along with 2.5 Sqmm continuous PVC insulated unsheathed stranded copper conductor cable for earth continuity wire, complete all as specified and directed by Engr-in-Charge.

Taking down existing wiring and material and labour for point wiring as per item No 4 here-in-before but and through existing PVC conduit/casing capping of any size/shape after opening of existing junction box cover and making good the disturbed surface of wall etc complete all as specified and directed by Engr-in-Charge. Note: Rate for taking down of existing wiring is included in the quoted rates.

M & L for sub main wiring with two single core PVC insulated un-sheathed cable with multi-stranded copper conductor (FRLSH) of 6 Sqmm and drawing through 25 mm dia PVC casing caping as per requirement with necessary fittings including earthing cable of PVC insulated un-sheathed stranded copper conductor of size 4 Sqmm (Nominal area), Single core (FRLSH), as earth continuity wire all as specified and as directed. Note: Two run cable and one run earth continuity conductor shall be measured as single run.

Supply and fixing switch piano, flush button, single pole, one way 5 Amp, 240 Volts, complete all as specified and directed by Engr-in-Charge.

Supply and fixing lamp holder, PVC/polycarbonate type with back plate straight or angular suitable for batten fitting, complete all as specified and directed by Engr-in-Charge.

S&F Ceiling rose surface backelite ISI marked with 3 terminal, single pole 240 V, single pole (65x50mm) surface type, complete all as specified and dirted by the Engr-in-Charge.

Supply and fixing switch socket combination 2-in-1, 5 pin, 5 Amps 240 Volts, flush type controlled by one switch, complete all as specified and dirted by the Engr-in-Charge.

S & F switch socket combination switch socket combination 3 pin 16 A, 240 V flush type complete all as specified and dirted by the Engr-in-Charge.

S & F bell push switch push button type single pole one way 6 Amps 240 Volts. complete all as specified and dirted by the Engr-in-Charge. (Make: Anchor/Plaza).

S & F in bell ding dong 230 volts complete all as specified and dirted by the Engr-in-Charge. Make: Anchor/Plaza or equivalent.

S&F decorative ultra slim square profile linear LED lighting LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient 20 W LED, 4 ft long, 220 Volt and connecting to ceiling rose with three core twisted flexible copper cable of suitable size along with flexible pipe complete all as specified and dirted by the Engr-in-Charge. Make: Havells Cat No LHEXAQP7PN1W020 or equivalent model of SYSKA/Crompton

S & F decorative ultra slim square profile linear LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient 9 W LED, 2 ft long, 220 V and connecting to ceiling rose with three core twisted flexible copper cable of suitable size along with flexible pipe complete all as specified and dirted by the Engr-in-Charge. Make: Havells Cat No LHEXBLP7IN1W009 equivalent model of SYSKA/CG

S&F Energy saving new generation 10 W LED IP 65 bulkhead luminaire with opal diffuser: Make Havells cat No:LHEXCFP7PN5W006 or equivalent model of Syska/CG

S & F energy efficient while colour surface mounted LED 36 luminaire suitable for 2x2 grid ceiling in combination with profiled and flat diffuser flexible copper cable of suitable size along with flexible pipe complete all as specified and dirted by the Engr-in-Charge. Make: Havells Cat No STRATO2X2PLR36WLED840M or equivalent model of SYSKA/CG

S & F in repair switch piano, flush button, single pole, one way 5 Amp, 240 Volts complete all as specified and dirted by the Engr-in-Charge.

S & F in repair lamp holder, PVC/polycarbonate type with back plate straight or angular suitable for batten fittings complete all as specified and dirted by the Engr-in-Charge.

S & F in repair ceiling rose, surface bakalite 3 terminal, single pole 240 Volts, single pole (65x50mm) surface type, complete all as specified and dirted by the Engr-in-Charge.

S & F in repair socket outlet 2-in-1, 5 pin, 5 Apms 240 Volts, flush type controlled by one switch, complete all as specified and dirted by the Engr-in-Charge.

S & F in repair switch socket combination Switch socket combination 3 pin 16 A, 240 Volts flush type complete all as specified and dirted by the Engr-in-Charge.

S&F in repair decorative ultra slim square profile linear LED lighting LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient 20 W LED, 4 ft long, 220 Volt and connecting to ceiling rose with three core twisted flexible copper cable of suitable size along with flexible pipe complete all as specified and dirted by the Engr-in-Charge. Make: Havells Cat No LHEXAQP7PN1W020 or equivalent model of SYSKA/Crompton

S & F decorative ultra slim square profile linear LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient 9 W LED, 2 ft long, 220 V and connecting to ceiling rose with three core twisted flexible copper cable of suitable size along with flexible pipe complete all as specified and dirted by the Engr-in-Charge. Make: Havells Cat No LHEXBLP7IN1W009 equivalent model of SYSKA/CG

S&F Energy saving new generation 10 W LED IP 65 bulkhead luminaire with opal diffuser: Make Havells cat No:LHEXCFP7PN5W006 or equivalent model of Syska/CG

S & F energy efficient while colour surface mounted LED 36 luminaire suitable for 2x2 grid ceiling in combination with profiled and flat diffuser flexible copper cable of suitable size along with flexible pipe complete all as specified and dirted by the Engr-in-Charge. Make: Havells Cat No STRATO2X2PLR36WLED840M or equivalent model of SYSKA/CG

S & F in repair PVC rectangular block for mounting of switches, socket with 3 mm thick plastic laminated sheet cover of size 200x150x50mm complete all as specified and dirted by the Engr-in-Charge.

S & F sheet metal enclosure for double door MCB DBs, phosphatised, powder coated, single Pole & Neutral (SPN), suitable for 12 way, 240 volts, IP 43 & IK 09 fixed on wall with din rail, neutral and earth bar, in proper position complete all as specified and dirted by the Engr-in-Charge. Make: Legrand Cat No:607721 or equivalent L&T/ABB.

S & F sheet metal enclosure for double door MCB DBs, phosphatised, powder coated, single Pole & Neutral (SPN), suitable for 8 way, 240 volts, IP 43 & IK 09 fixed on wall with din rail, neutral and earth bar, in proper position complete all as specified and dirted by the Engr-in-Charge. Make: Legrand Cat No:607721 or equivalent L&T/ABB.

S & F MCB Single Pole (SP) of capacity 6 Amps to 32 Amps, 240 Volts AC, breaking capacity 10 KA, C Series, fixed in proper position complete all as specified and dirted by the Engr-in-Charge. Make: Legrand Cat No:408587 or equivalent L&T/ABB.

S & F MCB Single Pole (SPN) of capacity 63 Amps, 240 Volts AC, breaking capacity 10 KA, C Series, fixed in proper position complete all as specified and dirted by the Engr-in-Charge. Make: Legrand Cat No:408518 or equivalent L&T/ABB.

S & F MCB Single Pole (SPN) of capacity 40 Amps, 240 Volts AC, breaking capacity 10 KA, C Series, fixed in proper position complete all as specified and dirted by the Engr-in-Charge. Make: Legrand or equivalent L&T/ABB.

S & F MCB Single Pole (TPN) of capacity 63 Amps, 240 Volts AC, breaking capacity 10 KA, C Series, fixed in proper position complete all as specified and dirted by the Engr-in-Charge. Make: Legrand or equivalent L&T/ABB.

Dismantling/Opening of Exhaust fan any make upto 450mm completely, taking out burnt copper winding from stater, cleaning of slots and rewinding the same with supper enameled copper winding wire including all materials such as insulating varnish, inslating papers etc, same gauge, cleaning of bearing, greasing and oiling refitting the same testing complete all as specified and dirted by the Engr-in-Charge.

14. M&L for earthing complete with galvanized steel earth plate electrode 600mm x 600mm x 6mm thick burried directly in ground not less than 2.25m deep below normal ground level (with the top edge of the plate not less than 1.50 m below the normal ground level) connected to GI earth wire 4 mm by means of GI bolts, nuts, check nuts and washers of GI all as shown in electrical plate No.3 of SSR Part-I connected to earthing test point with and including necessary excavation and earth work in any strata PCC pit 1:3:6 type C-1, 50 mm thick Pre-Cast RCC (1:2:4) type B-I cover slab (reinforced with 8 mm dia TMT bar@15cm C/C both way and suitable handle of 10mm dia round bar), including providing charcoal or coke and common salt in alternate layers of 15cm compacted thickness all round the earth electrode, with funnel and 20 mm bore galvanized iron watering pipe (light grade), wire mesh, aluminium lugs, complete in all respect, GI earth wire protected by 15 mm bore (medium grade) galvanized iron pipe and other end connected with main switch board or Earthing test point as directed, including necessary earth work and disposal of soil to a distance not exceeding 50 metre and necessary testing on completion complete all as specified and as directed by Engineer-in-Charge.

Deduct Schedule of Credit of Rs (-) 45245.00 (Minus) as listed in Schedule 'A' Part-II. Contract Sum shall be arrived after deducting the credit amount. Note :- Tenderers will not quote against this item being a firm amount.

M/S GHULAM HAIDER

M/S ASGAR ALI TIMBER SHOP

M/S LIBE & CO