REPAIR/ REPLACEMENT OF SEWAGE LINE COMPOUND WALL HARDSTANDING AND FENCING AND CERTAIN REPAIR TO INTERNAL FOOT PATH AT JAMSHEDPUR MIL STN UNDER AGE B/R-I GE RANCHI

Amount

Demolition of plain cement concrete in ground floor and paving not exceeding 15cm thickness below or above ground level including removal of same to exceeding 1 Km but not exceeding 1.5 Km complete all as specified and directed.

M&L for cement concrete (1:3:6) type C-2 (using 40mm graded stone aggregate) as in lean concrete for foundation in drain,manholes etc complete all as specified and directed.

M&L for forming fair finished drain or channel n.exc 30 Cm inner girth in cement concrete using extra cement including forms moulds mitered stopped ends etc complete.

Cutting into existing manholes for connecting new drains,making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section in )cement concrete(1:2:4) type B-1 smooth finished, and reforming benching as required for 150mm dia of pipe.

Demolition of brick work built in cement mortar, complete all as directed by EIC.

M&L Brick work with sub class `B` bricks straight or curved on plan exc 6 m mean radious built in CM (1:6) Complete all as specified and directed.

M&L for brick work with sub class ‘B’ bricks straight or curved on plan to any radius in half brick wall built in CM (1:4) Complete all as specified and directed.

M&L for rendering 15 mm thick on fair faces of bricks/concrete surface in cement mortar (1:6) on wall finishing the surfaces even and smooth without using extra cement.

M&L for rendering 15 mm thick on fair faces of bricks/concrete surface in cement mortar (1:4) on wall finishing the surfaces even and smooth without using extra cement.

Supply only integral water proofing compound (Make : Impermo, Water Seal, Acco proof) (WPC will be used as per manufacture instructions).

Excavation in trenches not exc 1.5 mtr wide and not exc. 1.5 mtr deep for foundation in soft/loose soil & getting out.

Demolition and breaking up drain pipes SGSW/RCC pipe set in cement mortar of internal dia 100 mm completes all as directed by EIC.

Description all as per item No 12 above but 150mm dia, complete all as directed by EIC.

Description all as per item No12 above but 200mm dia, complete all as directed by EIC.

M/L for PCC (1:3:6) type C-2 as in concrete bed to drain pipe including packing under and haunching against the sides of pipe after they are laid and tested for internal dia of pipe 100 mm complete all as specified and directed by EIC.

Description all as per item No 15 here-in-before but for 150mm dia of pipe complete.

Description all as per item No 15 but for 200mm dia of pipe complete.

M&L for 100 mm dia of reinforced concrete pipe ,class NP2 ,laid and jointed complete with collars as specified and directed.

Description all as per item No 18 but 150mm dia pipe.

Description all as per item No 18 but 200mm dia pipe.

Demoltion of RCC in any description and in any position complete all as specified and directed by Engr-in-Charge.

M&L for pre-cast RCC (1:2:4) type B-1 using 20 mm graded stone aggregate as in cover slab etc set in CM (1:4) complete including necessary from work.

S&F 10mm dia and over TMT bars cut to length bend to shape as required including crancking ends and binding with MS wire (amealed) not less than 0.9 mm dia complete all as specified and directed.

S&F 6 mm to 8 mm dia TMT bar cut to length bent to shape required including cranking ends and binding with MS wire (annealed) not less than 0.9 mm dia complete .

S&F 10 mm dia and over MS round bar cut to length bent to shape required for manhole cover handle or rungs or like all and over as directed at site.

Returning filling in trenches including spreading leveling and well ramming with water complete n.exc 25 cm thick in each layer in soft/loose soil.

Removing exavated soild n.exc 50 mtr and depositing where directed at a leve n. exc 1.5 mtr above the starting point.

M&L cleaning of sewage line, SWG/CI pipe or RCC pipe vertically/horizontally of dia 100 mm to 200 mm by rodding well flushing by using sufficient water and making it to clear for easy flow of sewage from WC, gully trap, Nahani trap up to the first manhole and from manhole to manholes including desludging and make it the proper functional to entire satisfaction of Engineer-in-Charge and removing the sludge, silt etc to a distance n.exc 500 m and burying it in pits and covered with earth and spreading lime @ 1 Kg per Sqm of covered area complete all as specified and directed at site.

Dewatring /Desludging of septic tank/soak well /soak pit and Manhole by manually or mechanically and removing muddy soil sludge etc . The removal of sludge to a distance not exceeding 250 metre and burried in the same pit.

Dismantling posts or struts (wood steel or RCC) any section, including taking out embedded portion (post embedded in concrete) and making good disturbed ground.

Excavation in post holes( or similar holes) each n exc 0.5cum each getting out, returning, filling in and ramming earth or broken rubble mixed with earh around , in layers n exc 25cm, watering and removing surplus soil to a distance n exc 50m and making good surfaces in soft/ loose soil.

S&F mild steel posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc, flat iron fillets (for securing wire mesh etc) including and all necessary drilling, bolting and riveting etc and similar work conforming to Fe-290 or Gde E-165

S&F MS screw bolts (machine made) with hexagonal or square heads at one end and screwed with the other end each screwed end to be fitted with washers and one hexagonal or square nut n. exc 5 cm long of diameter of shanks 11 to 15 mm.

Dismantling fencing wire mesh,any type, complete all as specified and directed by EIC.

S&F for 3 mm Dia GI wire 100 x 100 mm mesh,(chain link fencing) made up into mattresses, or cages lapped wired and laid in position including closing and binded and tied with RCC posts properly complete all as directed at site.

S&F in repair of GI barbed wire 2 strands 3 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails, straining bolts including sewing or tying with GI wire all as shown on drgs. (Each line wire to be measured) complete all as directed at site.

M&L for prepration of new steel surface not other wise described over 10 cm width or girth and applying two coat of synthetic enamel paint over one coat of red oxide

M&L applying two coat of black japan paints over one coat of red oxide primer on steel surfaces n.exe 10cm in width or girth including preparation of surfaces complete all as specified.

S&F PVC (SWR) pipes 110 mm single socketed in any length with rubberring joints, laid in trenches or in floors

Description all as per item No 40 above but 75mm bore

S&F PVC (SWR) pipes 75 mm single socketed in any length with rubberring joints fixed to wall complete.

S&F PVC bends any radius 110 mm dia

Description all as per item No 43 above but 75mm bore

M & L PCC 1:2:4 type B-1 using 20 mm graded store aggregate as in coping/channel and base including use and waste of form work where necessary complete all as specified and as directed.

M&L for 100 mm PCC(1:3:6) type C-2 using 40mm graded stone aggregate as in sub base complete all as specified and directed.

Forming construction/expansion joints 40 mm deep x 10mm wide ,filled with Grade 'A' sealing compound complete all as specified & directed by Engr -in charge.

Dismantling wrought iron or mild steel work of any description not otherwise privided for complete all as directed.

M & L Framed work as in doors or gates of angle or other section with gusset plates, rails,braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete Fe-410- W (Gde- E-250) quality- B incl structural steel is painted one shop coat of zinc chromate primer paint (including preparation of surface) at Contractor’s workshop before fabrication

Demolition of cement concrete of any description and in any position complete .

M &L cement concrete 1:4:8 type D-2, 75 mm thick as in sub base floors complete all as specified and directed.

M&L for 20mm thick Screed bed or bedding layer in cement mortar 1:6 for laying of floor tiles complete all as specified and as directed.

M&L coloured glazed chequered cement concrete tiles with grey cement and no pigment 30cm x 30 cm x 25mm thick set jointed and pointed in neat cement slurry in floors complete all as specified and directed.

M/S JAI MATA DEE CONTRUCTION CO. (BID ID -3166550)

M/S SWASTIK HI-TECH BUILDERS PVT LTD (BID ID -3168543)