PROVISION OF DEF OTM ACCN AT LULLANAGAR PUNE

Amount

SCH 'A' PART-I: BUILDING/STRUCTURES Note: This schedule is not pre-priced by MES and the rate indicated as "Rs 0.00" under Col 6 signifies this fact only

Construction of Block of Single Living Accommodation for 05 JCOs all as shown on drawings and as specified.

Construction of Block of Scooter Parking shed (for 05 Nos Scooters) all as shown on drawings and as specified.

Construction of Block of JCO's Mess for 58 JCOs with compound wall and wicket gate all as shown on drawings and as specified.

Construction of Block of Single Living Accomodation for 15 Hav & 110 ORs with Adm Office Accommodation all as shown on drawings and as specified.

Construction of Block of Covered Parking of Scooter shed all as shown on drawings and as specified.

Construction of Block of ORs Institute all as shown on drawings and as specified.

Construction of Block of Storage Accomodation all as shown on drawings and as specified.

Construction of Garbage Bin all as shown in drawing No. CEPZ/97/TD/4 sheet 1/1 and as specified.

Construction of Septic tank for 50 users complete all as shown on drawing No. CEPZ/88/TD/17M sheet 1/4 to 4/4 and as specified.

Construction of Septic tank for 200 users complete all as shown on drawing No. CEPZ/88/TD/17M sheet 1/4 to 4/4 and as specified.

Construction of Soakage well of size 2.40 metre dia and 3.0 metre depth complete all as shown on drawing No. CEPZ/2019/TD/03 sheet 1/2 & 2/2 and as specified.

Construction of Soakage well of size 3.0 metre dia and 4.50 metre depth complete all as shown on drawing No. CEPZ/2019/TD/03 sheet 1/2 & 2/2 and as specified.

Total amount of Sch ‘A’ Part II (Internal Water supply)

Total amount of Sch ‘A’ Part III (Internal Electrification)

Total amount of Sch 'A' Part-IV (Road)

Total amount of Sch ‘A’ Part V (Retaining walls)

Total amount of Sch ‘A’ Part VI (Area drainage)

Total amount of Sch ‘A’ Part VII (Sewage Disposal)

Total amount of Sch 'A' Part-VIII (External Water Supply)

Total amount of Sch 'A' Part-IX (External Electrification)

Total amount of Sch 'A' Part-X (Site clearance, excavation and earthwork)

NOTE: Schedule ‘A’ Part II to X items which are not Prepriced by MES, Bidders shall insert their rate in Column-6 only and the Estimated rate indicated as "0.0" are for that purpose.

SCHEDULE 'A' PART-XI (MISC B/R AND E/M WORKS)

Supply , installing, testing and commissioning of electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostat, NRV, connection piece etc. , including hot and cold water connection SS wire braided flexible pipes and suitable 3 pin plug top 15 A capacity, complete all as specified and directed.

Supply and Fix 20 watt LED tube light fitting, 4 feet long, with extruded Polycarbonate housing and robust construction LED lighting fixture with high lumen output, environmental friendly, energy efficient, fixed on PVC square boxes for mounting the fittings and electrically connecting with three single core 23/0.0076 PVC insulated multi stranded copper flexible cable from ceiling rose to light fitting (connector of lamp fitting) and one for earthing complete all as specified and directed. (Make : Havells Cat No LHEXBLP7PN1W020/ BENLO Cat No BLO4BAT20WT5/ Halonix Cat No HLB-08-20-CW-IP/ Wipro Cat No LL20-221-XXX-65 NE3).

Supply and fix Surface mounted 9/10 watts LED tube light fitting, 2 feet long with extruded Polycarbonate housing with square batten LED lighting fixture with high lumen output, environmental friendly, energy efficient. fixed on PVC square boxes for mounting the fittings and electrically connecting with three single core 23/0.0076 PVC insulated multi stranded copper flexible cable from ceiling rose to light fitting (connector of lamp fitting) and one for earthing complete all as specified and directed. (Make : Havells Cat No LHEXBLP7IN1W009/ BENLO Cat No BLO4BAT10WT5/ Halonix Cat No HLB-07-10-CW-IP / Wipro Cat No LL20-111-XXX-65 NE3).

S&F Decorative wall mounting fitting, in LT opal glass with nickel finish suitable for 6 W / 7 W/ 9 W/ LED lamp working on 240 volts, 50 Hz AC including LED bulb of capacity 9 watt complete all as specified and directed. (Make : Jaquar Cat Part No: JNL-CHR-WL SL55004E27/ /Havells Cat part No: LHFOAJEITZ11060 / Halonix Cat No: HLWB-05-B22)

S&F LED light fitting 2' x 2, 36 Watt, 230 Volts AC, surface type with high efficiency PMMA diffuser soft glare free light complete with driver, holders and LED luminaire suitable for fixing on roof / ceiling and connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and directed. (Make: Bajaj Cat Part No. BZSSQL36L LED WH GX / Havells Cat Part No. PLANOSURZXZPLS36WLED857S0720 or equivalent in makes as per Appendix 'C').

S&F LED light fitting mirror type with high output diffuser 2 feet 1 x 10 Watt, 230 Volts AC, decorative type with driver holder including LED lamp and connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and directed.

S&F LED light fitting, out door building security light of 35 Watt 240 Volts with high pressure die cast aluminium housing and heat resistant cover with driver, lamp bracket, impact and corrosion resistance including thermal management in multiple optics complete with IP 65/ 66 protection including bracket made of 32 mm dia GI tube light grade of 1 m length, bent to shape required including 2 Nos of flat iron brackets duly welded with nuts, bolts and washers etc., including electric connection with 3 core flexible copper conductor cable of appropriate size from ceiling rose to the fixture complete all as specified and directed.

S&F Ceiling fan complete with fan blades, down rod, electronic regulator and accessories, 230 Volts, 1200 mm sweep, minimum air delivery 210 CFM with service value 6.00 BEE five star rated with brushless direct current motor (BLDC), complete and connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and directed.

S&F Ceiling fan complete with fan blades, down rod, electronic regulator and accessories, 230 Volts, 1400 mm sweep, minimum air delivery 245 CFM with service value 6.00 BEE five star rated with brushless direct current motor (BLDC), complete and connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and directed.

S&F Exhaust fan made from sturdy Engineering plastic, AC single phase, 230 Volts, 50 Hz, 1200 RPM, 250 mm sweep with blades, frame, louvers and shutter including connecting with and including three core flexible copper cable of required length of size 23/0.0076 from ceiling rose/ connector to fan terminal, fixing the fan with suitable size of nuts, bolts, washers complete all as specified and directed.

S&F Exhaust fan, steel body heavy duty, AC 230 Volts, single phase, 380 mm sweep with blades, frame, louvers and shutter including connecting with and including three core flexible copper cable of required length of size 23/0.0076 from ceiling rose/ connector to fan terminal, fixing the fan with suitable size of nuts, bolts, washers complete all as specified and directed.

S&F Factory made MCB DB VTPN 12 way, double door load line, powder coated IP 43 Protection with provision for 4 Pole MCCB 125 Amps as incomer and MCB SP/ TP as outgoing, 415 V AC, surface / flush mounting made with CRCA sheet steel, with and including insulated vertical phase bus bars, neutral bars with shrouds, earth bars, sticking saddles, cement spill protector, colour coded interconnecting wire set, cable ties, blanking plates and circuit identification labels, fixed in wall including providing copper lugs / thimbles duly crimbles duly crimped for connection, complete all as specified and directed. (Make: L&T Model-DBVTL012DD or equivalent in makes specified in Appendix 'C').

M&L Painting lines, dashes, arrows, letters etc. on road /pavement, any shape and size or 2.5 mm thick road marking strips etc. using hot thermoplastic material confirming to BS:8262-1989 using fully/ semi-automatic application machine fitted with profile shoe heater and driven by experienced operator in white or golden yellow colour including preparation of surfaces complete all as specified and directed.

S&F Cat eye solar reflective type white / green / yellow of metal body and of size 100 mm x 100 mm x 20 mm with PAMA stripers reflector of model No. DA 972.0 fixed with and including MS studs of suitable size all as specified and directed. (Makes - Siddhi Vinayak Enterprises / Road Safety Mark / Dark Eye / Alaxius / 3M / Greenlite).

Supply, installation, testing and commissioning weather, dust and vermin proof, outdoor type, floor mounted, CPRI Approved LT Feeder pillar box, factory fabricated, totally enclosed, front & rear opening doors type, suitable for 415 Volts, 3 phase, 4 wire, 50 Hz AC supply, IP-54 class protection, made out of 3.15 mm thick CRCA sheet metal outer and 2.0 mm thick for inner compartments conforming to IS: 8623, panel shall be of suitable size for housing bus bars, LT switchgears and measuring instruments and duly powder coated after seven tank process on both sides, frame made out of MS angle iron frame made out of 50x50x6 mm cut to size, welded, bent to shape, cubical fabricated truly to box type, hinged panel board opening handles, locking arrangements, provided with sufficient circular holes at the bottom sheet for entry of plated cable glands and aluminium lugs suitable for incoming and outgoing cables, provided with PVC rubber bushes to spare holes, including internal wiring in the panel with PVC insulated multi stranded copper conductor cable 1100 volts grade IS 694 marked or PVC sleeved copper strips of appropriate sizes but not less than 4.00 Sqmm, including provision of PCC platform and grouting panel legs in PCC block so that the bottom of panel shall be at minimum 60 cm above ground level, all accessires prewired complete with danger notice board with and including the following controls and accessories:-

(a) Aluminium bus bar 300 Amp capacity for Phase-R-Y-B and 200 Amps for neutral mounted on epoxy based insulator installed with coloured sleeves - 01 Set (3 Phase and 1 neutral)

(b) Incoming - 4 Pole MCCB 160 Amp, 50 Hz, 415 volt with rupturing capacity 25 KA with adjustable thermal and magnetic settings (overload and short circuit protection) including connection, Ics = 100 % Icu - 01 No

(c) Outgoing- (i) MCCB, 4 Pole, 40 Amp with thermal release range, Ics = 100 % Icu, 415 V, 50 Hz with breaking capacity 16 KA - 02 Nos.

(ii) MCCB, 4 Pole, 100 Amp with thermal release range, Ics = 100 % Icu, 415 V, 50 Hz with breaking capacity 16 KA - 02 Nos (01 No standby)

(v) LED Phase indicating lamp (Red, Yellow Blue) - 01 Set.

(d) Panel wiring with suitable capacity of copper conductor cables of 1100 V grade.

(e) PCC foundation 1:3:6 type C-1 of suitable size as directed by Engineer-in-Charge.

NOTES:

(i) Panel shall be manufactured by the reputed manufacturer who is possession of type test certificate by CPRI not older than ten years.

(ii) Rate quoted shall be inclusive of complete excavation and earthwork in any kind of soil as per site requirement.

Supply, installation, testing and commissioning of 20 KVAR Automatic inteligent power factor corrector (APFC) capacitor bank LT Panel suitable for 3 phase 4 wire 415 volts 50 Hz system AC supply to improve PF to unit automatically step wise capacitor panel floor mounted, outdoor type, powder coated, weather, dust and vermin proof, factory fabricated as modular in construction, totally enclosed, front openable door type, IP-54 class protection, made out of 3.15 mm thick CRCA sheet metal outer and 1.60 mm thick for inner compartments conforming to IS: 8623, panel shall be of suitable size for housing instruments, frame made out of MS angle iron frame made out of 40 x 40 x 6 mm cut to size, welded, bent to shape, cubical fabricated truly to box type, hinged panel board opening handles, locking arrangements, provided with sufficient circular holes at the bottom sheet for entry of plated cable glands and aluminium lugs suitable for incoming and outgoing cables, provided with PVC rubber bushes to spare holes, including internal wiring in the panel with PVC insulated multi stranded copper conductor cable 1100 volts grade IS 694 marked or PVC sleeved copper strips of appropriate sizes but not less than 2.50 Sqmm, including provision of PCC platform and grouting panel legs in PCC block so that the bottom of panel shall be at minimum 45 cm above ground level and 45 cm embedded in concrete, all accessories prewired complete and including the following controls and accessories:-

(b) Naturally air cooled MPP double dielectric heavy duty 440 volts LV 50 HZ shunt power capacitor conforming to IS - 13340 and 13341 and IEC - 831 - 1 ISI marked designed on ambient temperature 10 degree to 50 degree Celsius delta connections complete with metal base enclosure copper wire connections for banking complete of GE POWER EPCOS/MAHER make with watt loss not more than 5 watt /KVAR complete no of stepping combinations of 2 + 3 + 5 + 5 + 5 KVAR each or as directed by Engineer-in-Charge.

(c) Incoming MCCB, 3 Pole and neutral, 63 Amp, Ics = 100 % Icu, 415 V, 50 Hz with breaking capacity 16 KA - 01 No

(d) Aluminium bus bar 100 Amp capacity for Phase-R-Y-B and 100 Amps for neutral mounted on epoxy coated insulator installed with nuts, bolts and washers - 01 Set (3 Phase and 1 neutral)

(f) Each bank shall be protected with HRC fuses of sultable

(g) Panel wiring with suitable capacity of copper conductor cables of 1100 V grade with necessary lugs, thimbles, glands - 01 Job.

(h) PCC foundation 1:3:6 type C-1 of suitable size as directed by Engineer-in-Charge.

NOTES:

(i) Panel shall be manufactured by the reputed manufacturer who is possession of type test certificate by CPRI not older than ten years.

(ii) Rate quoted shall be inclusive of complete excavation and earthwork in any kind of soil as per site requirement.

Horizon Construction

United Sales Corporation

Sharda Infratech

surendra infrastructure pvt ltd

Beejay Associates Contracts Pvt Ltd