Construction of compound wall to Park and providing water supply facilities to Beema Rao Nagar Toilet block in Kottucherry Commune (II Call).

Amount

Earth work in excavation by mechanical ans (Hydraulic excavator)/manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms , lift upto 1.5m, including getting out the excavated soil and disposal of surplus excavated soil as directed , within a lead of 50m -All kinds of soil.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering.- All work upto plinth level -1:5:10 (1 cement:5coarse sand : 10 graded stone aggregate 40mm nominal size)

Brick work with FPS bricks of class designation 35 in foundation and plinth in cement mortar 1:4 (1 cement : 4 coarse sand

Brick work with FPS bricks of class designation 35 in superstructure above plinth level upto floor V level in all shapes and sizes in cement mortar 1:6 (1 cement : 6 coarse sand)

12 mm cement plaster of mix - 1:5 (1 cement : 5 fine sand)

Supplying and fixing of steel grill work of m.s. angles,flats,squares and pipes including cost of welding charges, fixingin position in masonry walls with cement concrete 1:2:4 (1 cement : 2 course sand :4 graded stone aggregate 12.5mm nnominal size) including one coat of priming coat etc. complete

Providing and fixing on wall face unplasticised rigid PVC rain water pipes conforming to IS : 13592 type A including jointing with seal ring conforming to IS : 5382 leaving 10mm gap for thermal expansion, (i) single socketed pipes. 110mm diameter.

Providing and fixing on wall face unplasticised- PVC moulded fittings / accessories for unplasticised rigid PVC rain water pipes conforming to IS : 13592 type A including jointing with seal ring conforming to IS : 5382 leaving 10mm gap for thermal expansion. Single Tee with out door 110X110X110mm

Providing and fixing on wall face unplasticised- PVC moulded fittings /accessories for unplasticised rigid PVC rain water pipes conforming to IS : 13592 type A including jointing with seal ring conforming to IS : 5382 leaving 10mm gap for thermal expansion. Bend 87.5deg. 110mm bend.

Supplying fixing and commisioning of Suguna/ Texmo /Sharp 1 HP monoblock pumpset slow speed single phase motor. The rate include the cost of pumpset , pumpset fixing in position and test run etc. complete .

Providing and fixing ball valve (brass) of approved quality complete. high or low pressure with plastic floats - 25 mm nominal bore

Providing and fixing brass bib cock of approved quality - 15 mm nominal bore

Providing and fixing of 65mm Godrej Navtal lock of 6 levers etc complete

Providing and fixing factory made P.V.C. door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet mitred at corners and joined with 2nos.of 150mm long brackets of 15x15mm M.S.square tube, the vertical door profiles to be reinforced with 19x19mm M.S.square tube of 19 gauge,EPDM rubber gasket weather seal to be provided through out the rame.The door frame to be fixed to the wall using M.S.screws of 65/100mm size complete as per manufacturers specification .

Providing and fixing to existing door frames - 30mm thick factory made solid panel PVC door shutter consisting of frame made out of M.S.tubes of 19 gauge thickness and size of 19mm x 19mm for stiles, top & bottom rails . M.S.frame shall have a coat of steel primers of approved make and manufacture M.S.frame covered with 5mm thick heat moulded PVC 'C channel of size 30mm thickness, 110mm width out of which 90mm shall be flat and 20mm shall be tapered in 45 drgree angle on either side forming stiles; and 5mm thick , 110mm wide PVC sheet out of which 90mm shall be flat and 20mm shall be tapered on the inner side to form top and bottom rail and 130mm wide PVC sheet out of which 90mm shall be flat and 20mm shall be tapered on both sides to form lock rail.Top bottom and lock rails shall be provided either side of the panel. 10mm(5mmx 2) thick , 20mm wide cross PVC sheet shall be provided as gap insert for top rail & bottom rail. Panelling of 5mm thick PVC sheet to be fitted in the M.S.frame welded/sealed to the stiles & rails with 7mm (5mm + 2mm) thick x 15mm wide PVC sheet bending on inner side , and joined together with solvent cement adhesive An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the 'C channel using PVC solvent adhesive etc.complete manafactures specification & drawing .

Finishing walls with water proofing cement paint of required shade - New work. (Two or more coats applied @ 3.84 kg/10 sqm)

Finishing walls with water proofing cement paint of required shade - Old work (one or more coats applied @ 2.20 kg/10 sqm) over priming coat of primer applied @ 0.80 litres/10 sqm complete including cost of priming coat.

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade - Two or more coats on new work.Applying priming coat with ready mixedpink or grey primer of approved brand and manufacture on wood work (hard and soft wood)

Supplying and drawing of 1.5 sqmm. FR PVC insulated, copper conductor, single core cable in the existing surface/recessed, PVC/steel conduit/PVC casing and capping as required.Make: Finolex/Polycab:-

Supplying and drawing of 2.5 sqmm. FR PVC insulated, copper conductor, single core cable in the existing surface/recessed, PVC/steel conduit/PVC casing and capping as required. Make: Finolex/Polycab:-

Supplying and fixing S.P 1 way 5/6amps piano/flush type switch on the existing switch box/cover including connections etc. as required. Make: Kundan/ Anchor/ Vinay

Supplying and fixing S.P 1 way 15/16amps piano/flush type switch on the existing switch box/cover including connections etc. as required. Make: Kundan/ Anchor/ Vinay:-

Supplying and fixing 3 pin 15/16amps piano/flush type socket outlet on the existing switch box/cover including connections etc. as required. Make: Kundan /Anchor /Vinay:-

Supplying and fixing 10 amps Kit Kat Fuse on the existing switch box/cover including connections etc. as required.Make:Kundan/Anchor/Vinay:-

Supplying and fixing 3 plate, 5 amp.ceiling rose on the existing junction box/wooden block including connections etc. as required. Make: Kundan/ Anchor/ Vinay:-

Supplying and fixing jumbo type Batten/Angle Holder including connections etc. as required .Make: Kundan/Anchor/Vinay:-

Supplying and fixing of 20A single phase DP main switch with Keycard Switch on the existing modular plate and switch box including connections but excluding modular plate as required.Make: MK :-

Supplying and fixing tube light fitting with copper choke.

Bulk head fitting aluminium alloy body heat resistant prismatic glass cover with specially designed gasket (GLS 100W type). Make: Philips/Bajaj

SWAMINATHAN S