GE(S) BTD TOKEN NO 55 OF 2022-23 COMPREHENSIVE MAINTENANCE JOINERY SUNKEN PORTION PLUMBING WORK TO JCO/OR MD ACCN TO BLDG NOS P 965 P 951 MP 11 TO MP 26 AND CERTAIN OTHER BLDGS OF KARAM SINGH ENCLAVE AND BANA SINGH ENCLAVE IN AGE BR II UNDER GE (S)

Amount

Taking down chowkhats or frame with shutter (without taking off shutters from the frames) not exceeding 1.5 Sqm each and removal from site complete all as specified and directed.

Supply and fixing factory made PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, all as specified in Preamble 8B. 3.1 of SSR Part -II (2020) and all as shown on drawing of SSR Part-II (2020) including making good the disturbed surface with cement plaster 1:6 and matching the colour of new plaster with existing surface complete all as specified and directed. complete all as specified and directed.

Supply and fixing factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and gap insert for top rail and bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, supplying and fixing in the frame at site all as per instruction and drawing shown for item No 8080 of SSR Part II on Sl Page No 176. complete all as specified and directed.

Supply and Fixing solid PVC Door Frame as in cupboard of size 50mm x 47mm made out of 5mm signle side prelam PVC sheet used instead of plain colour PVC sheet & edges will be painted to match with prelam sheet PVC teinforced with M.S. square tube, suppling & fixing in opening as per specification including making the good the disturbed surface with cement plaster 1:6 and matching the colour of new plaster with existing surface complete all as specified and directed.

Supply and Fixing factory made solid PVC moulded Door Frame shutter as in cupboard (with particle board core), 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick Moulded prelam PVC sheet on the front face & 2mm prelam PVC sheet on back face, supplying & fixing in frame at site as per specification complete all as specified and directed.

Supply and fixing 100mm long (ISI Marked) extruded aluminium anodised butt hinges with galvanised mild steel screws complete all as specified and directed. .

Supply and fixing 150 mm long (ISI marked) aluminium anodised barrel tower bolts of extruded section, complete all as specified and directed. .

Supply and fixing 125 mm long, aluminium anodised handles, cast type, (ISI marked) complete all as specified and directed. .

Taking down chowkats or frames with shutters (without taking off shutters from the frame) exc 1.5 sqm but not exc 4 Sqm each complete all as specified and directed.

Supply and fixing Pressed steel frames of size 125 X 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, (thickness of sheet shall be 1.25mm) and making good the wall with plaster in CM 1:6 complete all as specified and directed.

Supply and fixing for pressed steel frames of size 105 X 60 mm for doors with one or more rebates including necessary fixing lugs hinges, locks strike plate etc, (thickness of sheet shall be 1.25mm) and making good the wall with plaster in CM 1:6 complete all as specified and directed.

Supply and fixing for pressed steel frames of size 75 X 60 mm for Cubboard frames with one or more rebates including necessary fixing lugs hinges, locks strike plate etc(thickness of sheet shall be 1.25mm) and making good the wall with plaster in CM 1:6 complete all as specified and directed.

S & F Factory made steel window box type using ERW bollow 'P' section comprision double frame for and including gauged and glazed skeleton shutter jointed internally with flat iron 40x4mm complete including grill of 8mm square bars, fixed horizontally @ 10cm c/c, hinges, handle, tower bolts, stops, lugs etc.complete all as specified and directed.

Supply and fixing mild steel framed work Framed work such as grills, gate, grantings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe290,Gde-E-165 complete all as specified and as directed

M & L for PCC 1:3:6 type C1 (20mm graded stone aggregates) as in filling back of pressed steel door frames/chowkats and for fixing hold fasts, etc., complete all as specified and directed.

Taking down shutters of any description exceeding 1.0 Sqm but not exceeding 2.0 Sqm each and removal from site complete all as specified and directed.

Supply and fixing 2nd class HW 35mm thick plain framed, panelled shutter (two panel) with lock rail and panel of 9mm thick B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS-1003 (Part I) kiln seasoned and chemically pressure treated complete all as specified and directed.

Supply and fixing 2nd class HW 35mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauge, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing glass, gauze, etc.; sizes of members of shutters as specified in SSR Part I Section 8, Clause 8.24 (a) complete all as specified and directed.

Supply and fixing 19mm thick prelaminated, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

Supply only mild steel Butt Hinges, 100 mm size, medium weight, cold rolled fixed with screws/welding to wooded/steel frames or chowkats, complete all as specified and directed.

Supply and fixing Continuous (piano) hinges, mild steel, bright finish or electrogalvanised (width of flaps 30mm when open) complete all as specified and directed.

Material and Labour for painting to new wood and wood based surfaces of any description, over 10 cm in width or girth, not otherwise described with two coats of synthetic enamel paint over a coat of pink primer including preparation of surfaces complete all as specified and directed.

Supply and fixing MS galvanised mild wire cloth 0.56 mm nominal dia of wire and avarage width of aperture 1.18mm and fixed with tinned tacks to galvanised wire stapple complete all as specified and directed.

Supply and fixing in repairs Mild steel galvanised wire cloth 0.56mm nominal dia of wire and 1.18 mm average width of aperture fixed with tinned tacks or galvanised wire staple, complete all as specified and directed.

Supply and fixing 300mm long mild steel sliding door bolts with hasp and staple, plate type, stove enameled black, with bright bolts not less than 12 mm dia with and including a minimum of 6 bolts and nuts, 4 on bolt plate and 2 on staple plate and fixed, complete all as specified and directed.

Supply and fixing 150 mm long, mild steel barrel tower bolts, stove enamelled black with bright bolts and fixed (ISI marked) complete all as specified and directed.

Supply and fixing 150 mm long, mild steel pressed handles, oval type, stove enamelled black (ISI marked) complete all as specified and directed.

Supply only Neoprene/ EPDM rubber gasket complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/springs clips complete all as specified and directed.

Material and Labour for preparation of new steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide or zinc chrome complete all as specified and directed.

Dismantling existing broken unserviceable PVC tank of capacity 500 Ltrs complete all as specified and directed.

Supply and fixing three layers 500 litre HDPE water storage tanks polyproof. white in colour rotational moulded polyethylene (cylindrical vertical with closed top) hoisted and fixed in position including Supply and fixing of suitable size inlet/outlet arrangement & other accessories 20mm bore ball valve (weight 210 gms Minimum) complete all as specified and directed.

Supply and fixing 20mm bore ( weight 210 gms Minimum) ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of size complete all as specified and as directed.

Supply and fixing in repair 15mm Brass CP wall mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

S & F in repair plastic water closet seat cover, white/ivory colour, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

Supply and fixing in repair PVC connections 15 mm bore, 450 mm length, heavy duty, with PTMT nuts complete all as specified and directed.

Dismantling floor, hearth or wall tiling/terrazzo finish etc including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Material and labour for joint free non-skid coloured ceramic tiles 7-8 mm thick (square / rectangular), area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in white cement with pigment or coloured cement to match the shade of tiles over and including 15 mm thick screed plaster in CM 1:6 complete all as specified and directed. .

Material and Labour for joint free glazed ceramic coloured tiles of approved quality in vertical surfaces 450mmx300 mm x7mm/ 600mm x 300 x 7mm thick set jointed in neat cement slurry/paste and pointed in coloured cement to match with the tiles over and including 10mm thick plaster in CM 1:4 complete all as specified and directed.

Material and Labour for non skid floor tiles, colored, of size 600x600x7mm thick or of size as approved as in floors set and jointed in neat cement slurry and pointed in white cement with pigments to match over and including the provision of 15 mm thick bedding layer in CM 1:6 all as specified and directed.

Description all as per Ser item No 41 above but on vertical surfaces as in skirtings etc on 10mm thick back coat in CM 1:4, complete all as specified and directed.

Demolition of cement concrete (unreinforced) including tiles of any description & terrazo finish, etc. not exceeding 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L in repairs marble work (Udaipur green slabs) not less than 16 mm thick (table rubbed and polished) as in cooking platforms and like in cement mortar (1:4) in pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade including rounding the edges complete all as specified and directed.

Material and labour 75mm thick, cement concrete 1:3:6, type C2 using 40mm graded crushed stone aggregate as in floors, plinth protection, paths, etc and finishing top surfaces even and smooth without using extra cement complete all as specified and directed.

Supply and fixing in repair 15mm bore bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule for complete all as specified and directed.

Supply and fixing in repair 15mm bore pillar taps, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed.

Supply and fixing in repair stop valve for 15 mm bore dia of pipe, cast copper alloy, chromium plated, screwed down, high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for brass ferrule complete all as specified and directed .

Supply and fixing in repair 15 mm bore fancy type chromium plated stop valve cast copper alloy, with long shank & cup (concealed type) with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

Supply and fixing in repair PVC connections 15 mm bore, 450 mm length, heavy duty, with PTMT nuts complete all as specified and directed.

Supply and fixing in repair brass chromium plated shower rose 125 mm size, with swivel joints, including fixing to steel pipe or union, complete all as specified and directed.

Supply and fixing in repair sink with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x460mm bowl size 410mm x330mm x160mm including 40mm dia waste fittings,brass,chromium plated with long screwed and fly- nuts,flange end bedded in red lead cement and other end fixed complete all as specified and directed .

Supply and fixing stainless steel plate rackes of size 900mm x 600mm x 250mm and thickness of SS strip of 1mm fixed on wall etc complete all as specified and directed.

M&L for 32mm dia fancy type PVC coated in wooden finish on MS pipe coloured curtain rod with brackets and knobs at both ends with 6No rings in 1meter length as per site requirement including taking down old existing PVC conduit pipes with accessories complete all as specified and directed. Note:- The cost of brackets and knobs is deemed to be including in the quoted rate. Nothing extra shall be paid on this account.

Taking down or up 15 mm bore galvanised iron tubing/PL-AL-PE pipes and connection complete all as specified and directed.

Taking down or up 20 mm bore galvanised iron tubing /PE-AL-PE pipes and connection complete all as specified and directed.

Supply and fixing 15mm bore GI tubing medium grade with all fittings and fixed to walls & ceilings or laid in floors, complete all as specified and directed. and directed .

Supply and fixing 20mm bore GI tubing medium grade with all fittings and fixed to walls & ceilings or laid in floors, complete all as specified and directed. and directed .

Taking down AC eaves gutters and rainwater pipes (any size and pattern), including all fittings, heads, shoes, bends, swan-necks, etc complete all as specified and directed..

Supply and fixing 110 mm bore PVC (SWR) pipe single socketed in any length with rubber ring joint fixed to walls with MS clamps complete all as specified and directed.

Supply and fixing 110 mm bore, PVC (SWR) fittings such as bends, tee, shoe etc; fixed to PVC pipes,complete all as specified and directed.

Supply and fixing in repair vitreous china (white) squatting pan 'Orissa' pattern, white, size 580 x 440x260 mm, with integral foot rest (excluding flushing cistern and flush pipe) including connection to trap and to flush pipe, anti-syphonic pipe etc including making good to floor and including trap set, in and including lime concrete complete all as specified and directed.

Supply and fixing in repairs 10 litres capacity, PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets including 32 mm dia flush pipe of polyethylene of low or high density of PVC complete all as specified and directed.

Supply and fixing in repair Vitreous china wash hand basin, white, flat back, fancy type, size 550 x 400 mm including cast iron cartilever bracket 32 mm dia brass waste coupling and including PVC waste pipe of 32mm dia, fixing of waste fitting and union complete all as specified and directed. .

Dismantling and disconnecting of existing CI soil vent pipe 100 mm bore fixed to wall,laid in trenches incl all fittings & accessories complete all as specified and directed.

Dismantling and disconnecting of existing CI soil vent pipe 75 mm bore fixed to wall,laid in trenches incl all fittings & accessories complete all as specified and directed.

Supply and fixing cast iron sand cast soil waste and vent pipe 100mm bore with or without ears fixed with chemical cement joints fixed in walls complete all as specified and directed.

Supply and fixing cast iron sand cast soil waste and vent pipe 75mm bore with or without ears fixed with chemical cement joints l fixed in walls complete all as specified and directed.

Supply and fixing 100mm bore C. I. bends (any radius),diminishing pieces or tapers (larger bore measured) with heel rest including oval access door complete all as specified and directed.

Supply and fixing 75mm bore C. I. bends (any radius),diminishing pieces or tapers (larger bore measured) with heel rest including oval access door complete all as specified and directed.

Supply and fixing 100mm bore C. I. branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches including jointing to waste pipe fixed in sement concrete 1:2:4 type B 1 in repair with oval access door bore complete all as specified and directed. and directed

Supply and fixing in repair cast iron floor trap, 75mm dia with grating including jointing to waste pipe fixed in cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate including CP gratting of suitable size complete all as specified and directed.

Taking down cement or cement lime plaster of any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specied and directed.

Material and labour for 15mm thick rendering in CM (1:4) on fair faces of brick work or concrete surfaces and finishing even & smooth but without using extra cement & with using integral water proofing compound complete all as specified and directed.

Supply only of Liquid water proofing compound of approved make complete all as specified and directed.

Material and labour for rendering 15 mm thick in cement mortar in (1:6) on other then fair faces of brick work or concrete surfaces and finishing the surface even & smooth without using extra cement complete all as specified and directed.

Dubbing out average 10mm thick in cement mortar 1:4 on irregular face of ceiling complete all as specified and directed.

M & L for preparation of new plastered surafaces of walls and applying two coats of acrylic distemper over a coat of suitable primer including a layer of 2 to 3mm thick wall putty complete all as specified and directred.

Material and labour for applying three coats of white wash on newly plastered or unplastered ceiling surfaces including preperation of surfaces, complete all as specified and directed.

Material and labour for applying two coats of cement base paint over a coat of primer on newly plastered wall surfaces including cornices & pillasters etc as per manufacturer's specifications & instructions including preparation of surface, complete all as specified and directed.

Preparation of old plastered or unplastered decorated surfaces of walls, chajja etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds, mass, efflorescent salts and trading oil and greasy spouts and applying one coat of cement base paint on walls including cornices etc complete all as specified and directed.

M & L for preparing of plastered or unplastered old decorated surfaces of Ceiling including cornices and pillars etc by brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent, salt, trading oil and greasy spouts and applying two coat of white wash on ceiling including cornices etc complete all as specified and directed.

M&L for preparation old plaster surfaces of wall by brooming down or steel wire brushing or by using mechanical sander and applying two coats of acrylic distemper on walls including a layer of 2 to 3mm thick wall putty complete all as specified and directed.

M&L for preparation old previously treated surface of steel and iton work any description over 10 cm width or girth and applying one coat of synthetic enamal paint on old steel surfaces, complete all as specified and directed.

M&L for preparation old previously treated surface of wood of wood based surfaces 10 cm width or girth and applying one coat of synthetic enamal paint on old decorated wooden surfaces, complete all as specified and directed.

M & L for applying one coat of weather proof exterior emulsion on walls including preparing of old plastered or unplastered old decorated surfaces of walls by brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent, salt, trading oil and greasy spots etc complete all as specified and directed.

Demolition of brick work or stone / boulder masonary, built in cement mortar including all quoins, arches, pillars etc., complete all as specified and directed.

M&L brick work with sub class 'B' old size bricks straight or curved on plan exc 6 m mean radius built in CM 1:6 but except bricks (old serviceable bricks to be used) complete all as specified and directed. Note : The rate includes for cleaning of old bricks.

Disconnecting existing tanks of capacity in liters exc 250 & n exc 500 setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately). complete all as specified and directed.

Cleaning of water tanks exceeding 250 ltr and not exceeding 500 ltr capacity including removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. complete all as specified and directed.

Dismantling / taking down 15 mm dia bib cock/ stop cock/angle cock of any pattern or of any type and re-fixing the same after minor repairs such as replacement of washers etc or re-fixing old serviceable bib cocks/ stop cocks any pattern complete all as specified and directed. and directed. (any major parts such as jumpers brass/ spindles/ caps etc to be measured as supply only and paid for accordingly)

Supply only Jumper brass with rubber or leather washer complete for 15 mm dia bib cock / stop cock brass complete all as specified and directed.

Supply only spindle brass for 15 mm dia CP Bib cock/ pillar cock/ concealed cock of any pattern complete all as specified and directed.

Supply only capstan head / cap of CP bib tap / CP stop cock 15 mm size complete all as specified and directed.

Supply and fixing in repairs bib cock PTMT standard 15 mm dia of any colour high pressure screwed for iron pipe & fixed ( male or female as required) complete all as specified and directed.

Supply and fixing in repair PVC Knob/Handle (as per sample) for 10 ltr capacity PVC low level flushing cistern complete all as specified and directed.

Supply and fixing in repair PVC Syphon Kit (as per sample) for 10 ltr capacity PVC low level flushing cistern complete all as specified and directed.

Supply and fixing in repair complete Veta washer set (as per sample) for 10 ltr capacity PVC low level flushing cistern complete all as directed.

Fixing only in repair low level flushing cistern any capacity after carrying out minor repairs such as stopping of leakage etc. complete all as specified and directed.

Supply and fixing in repair tank nipple of suitable size at required on ground complete all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise specially provided for complete all as specified and directed

M & L for rendering 15mm thick wall plaster in CM 1:4 mixed with water proofing compound complete all as specified and directed

Supply only Integral water proofing compound complete all as specified and directed

M & L for applying two coats of Dr. Fixit pidecrete URP in sunken floor portion of toilets & bathroom, chajja, staircase etc by using URP + cement in the proportion of (1:1.5) and making pedicrete solution and applying by brush etc complete all as specified and directed

M & L for PCC 1:5:10 type E-2 as in filling of sunken floors etc complete all as specified and directed

Note:- All debris obtained from dismintling, demolition and taking down (Exept credited to contractor) shall be desposed off out side MOD land and charges, if any, as incurred in civil area as per their regulator shall be deemed to be including in quoted rates. No extra claim on this account shall be admissble.

Note:- Net contract sum shall be calculated after deduction of Sch of credit.

M/s Manav Builders

FAQIR CHAND

M/S BHAGWATI CONSTRUCTION COMPANY

SHARDA ENTERPRIES

M/s Kamal Constructions

RAMA AUTOS