CA NO GE/C-78/2020-21 REPAIRS TO EXTERNAL FASCIAS ROOFS CHAJJAS BALCONY PLINTH PROTECTION RAILINGS INCLUDING PREVENTION OF LEAKAGE/SEEPAGE JOINERY PLASTERING FLOORING PLUMBING AND INTERNAL PERIODICAL SERVICES IN MD ACCN OF NPC DS SHOPPING

Amount

Demolition of brick work built in cement mortar in any description and position, complete all as specified and directed by Edngineer-in-Charge.

M & L for brick work with sub class 'B' bricks old size bricks straight or curved on plan exe 6m mean radius built in CM 1:4 complete all as specified and directed by Edngineer-in-Charge.

S & F MS framed work such as grills, gratings etc with ends of bars shouldered and or riveted, framed guard bars, barred iron doors, ladders, frame work of water trough, railings,cooler stand and similar work to conforming to Fe -290-0 including Preparation of new steel and iron surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of redoxide primer, including dismentalling of existing rasted/broken grills complete all as specified and directed by Edngineer-in-Charge. upto six storey height.

M & L Cement concrete 1:2:4 type B0 (using 12.5 mm graded stone aggregate) as in coping hard fsts blooks roof kerbs or mud stops etc including weathering slightly rounded or chamfered edges, finished even and smooth without using extra cement including form work , complete all as specified and directed by Edngineer-in-Charge.

M & L for 15mm thick rendering in cement mortar 1:4 on fair face of brick walls/ concrete surfaces & finished even and smooth without using extra cement including taking down existing plaster in any position complete all as specified and directed by Edngineer-in-Charge.

M&L for preparing of newly plastered surface and applying two coat of building grade bitumen 85/25 @ 1.2Kg/Sqm in each layer on roof surfaces complete all as specified and directed by Edngineer-in-Charge.

Cuting shrubs wild growth/tree not exc 30 cm girth and removing complete vegetation growth from walls including taking out roots from roof/brick work and making good the disturbed surface with PCC 1:2:4 type B0 and disposing the rubbish from site (MOD land) for a block of eleven flats of six storey height, complete all as specified.

S&F of 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed complete to walls, ceilings or in floors with suitable clamps/bracket including taking down old PVC/CI pipes and necessary cutting through RCC roof and brick work etc (above six storey height) and making good complete all as specified and directed by Edngineer-in-Charge.

S&F of 110mm dia PVC (SWR) bends any radius with solvent joints, complete all as specified and directed by Edngineer-in-Charge.

S & F in repair chicken wire mesh standard thickness and aperture all as specified and directed by Engineer-in-charge.

M&L water proof treatment to RCC roof slab by providing 50 mm average thickness PCC 1:2:4 incorporting CONPLAST WL (water prooof compound) in the proportion as directed by the manufacturer and apply on damp PCC surface, first coat of Brush Bond RFX and again apply second coat of Brush Bond RFX after drying of first coat (average 1 - 1.5 mm thickness) and on completion, provide 25 mm thick PCC 1:2:4 mix (4 parts of 10mm nominal coarse aggregate, 2 parts of fine aggregate & 01 part of cement) cement concrete screed and then finsh the top sufurace even and smooth without using extra cement . The compete roof shall be tested by ponding of water for 24 Hrs complete all as directed at site. Note :- Brush bond RFX liquid, powder and conplast WL shall be of FOSROC or equivalent in Star/Pidilite.

Taking up or down 20 mm GI tubing medium grade with all fittings and connections incl cleaning for refixing or removal to store complete all as specified and directed by Edngineer-in-Charge.

All as per item no.15 here-in-before but dia of GI pipe is 15mm complete all as specified and directed by Edngineer-in-Charge..

S&F 20mm dia GI tubing medium grade with all fittings and connections fixed to wall or ceiling or laid on floor etc incl cutting chasing where required complete all as specified and directed by Edngineer-in-Charge.

All as per item no.17 here-in-before but dia of GI pipe is 15mm complete all as specified and directed by Edngineer-in-Charge..

Refixing old steel tubing of 20mm dia and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified and directed by Edngineer-in-Charge.

Refixing old steel tubing of 15mm dia and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified and directed by Edngineer-in-Charge.

Disconnecting existing tanks of exc 500 ltr and n exc 1000 ltr capacity, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position complete all as specified and directed by Edngineer-in-Charge..

Cleaning and removing all scale and dirt, etc, from tanks of 1000 ltr capacity and from mouths of circulating pipes, etc complete all as specified and directed by Edngineer-in-Charge..

S&F 1000 ltr capacity rotational moulded polyethylene water storage tanks triple layer (cylindrical vertical with closed top) hoisted and fixed in position with 20mm Ball brass valves,high pressure,with polythene float and flynut complete, screwed for iron pipe or brass ferrule Minimum wt 20mm-210grm and s&f in repair 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed incl Dismantling of PVC water tanks of exc 500 litres and n.exc 1000 litres capacity of any condition or type incl complete all as specified and directed by Edngineer-in-Charge.

M& L for cement concrete 1:3:6 type C2 (using 40 mm graded stone aggregate) as in plinth protection 75 mm thick laid in bays and surfaces finished even and fair, including filling the joints with bitumen mastic including demolition of existing surface all as specified and disposing to debries etc all as directed by Engr-in-Charge.

M& L for Chequered cement concrete colour tiles 30 cm x 30 cm x 25mm thick, set, jointed and pointed in near cement slurry in floors including 15mm thick screed bed in floor in C M 1:6 including cement concrete 1:2:4 type B 1 (20mm graded stone aggregate) as in levelling course 25mm thick including demolition of existing flooring/hardstanding all as specified and disposing to debries etc all as directed by Engr-in-Charge. Make Unistones/ Nitco/ Ultra Tiles.

M&L Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing mirror polished over 20mm thick screed bed in CM 1:4 incl demolition of existing flooring/steps/jambs etc all as specified and as directed.

M & L Machine pressed precast concrete rubber moulded interlocking coloured paver block any shape and size confirming to IS 15658-2006 of 60mm thickness M-40 Grade including cement concrete 1:4:8 type D2 (40mm graded stone aggregate) as in sub base 75mm thick and 25 mm thick sand cushioning including demolition of existing flooring/hardstanding all as specified and disposing to debries etc all as directed by Engr-in-Charge. Make Unistones/ Nitco/ Ultra Tiles.

Providing precast cement concrete 1:2:4 type B1 using 12.50mm graded aggregate, set in cm 1:4 louvres and jallies, 40mm thick (measured solid), including all mouldings but excluding frame including demolition of existing RCC jali all as specified and disposing of debries etc as directed by Engr-in-Charge.

Taking down & refixing shutters of any description exc 1 sqm but n.exc 2 sqm each after easing and repair for adjustments etc., complete all as specified and directed by Edngineer-in-Charge.

Taking down shutter not exc 1 sqm each of any description complete all as specified and directed by Edngineer-in-Charge.

Taking down shutter exc 1 sqm but n.exc 2 sqm each of any complete all as specified and directed by Edngineer-in-Charge.

Taking down chowkats or frames not exc. 1.5 sqm each (with shutter without taking off shutter) complete all as specified and directed by Edngineer-in-Charge.

Taking down chowkats or frames exc 1.5 sqm but n.exc 4 sqm each (with shutter without taking off shutter) complete all as specified.

M&L second class hard wood plain, solid, straight, chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints including treating the back of chowkhat with two coat of black japan/bituminiuos paint complete all as specified and directed by Edngineer-in-Charge.

S& F 35 mm thick flush shutters (factory made) solid core construction, with block board core and plywood face panel, commercial type on both sides. Flush shutters shall have teak wood edging as specified in IS (incl two nos 150 mm long extruded aluminium tower bolts, three nos 100mm long medium weight MS butt hinges, two nos 150 mm long extruded aluminium handles, one door stopper140mm long extruded aluminium and one no 300 mm long Aluminum Sliding door bolts and two coats synthetic enamel paint along with one coat of pink primer), complete all as specified and directed by Edngineer-in-Charge.. Note :- Rate quoted are deemed to be inclusive of fixture and fittings mentioned to each door shutter and painting.

S&F 35mm thick 2nd class Hard wood rail & style (factory made) plain, framed, paneled shutter with lock rail & panel of 12mm veneered particle board with commercial veneering on both sides (incl two nos 150 mm long extruded aluminium tower bolts, three nos 100mm long medium weight MS butt hinges, two nos 150 mm long extruded aluminium handles, one door stopper140mm long extruded aluminium and one no 300 mm long Aluminum Sliding door bolts and two coats synthetic enamel paint along with one coat of pink primer), complete all as specified and directed. The size of rail & style as per IS :1003 (Part I), Kiln seasoned & chemicals pressure treated, complete all as specified and directed Note :- Rate quoted are deemed to be inclussive of fixture and fittings mentioned to each door shutter and painting.

M&L for 35 mm thick 2nd class hard wood glazed and Skelton door shutter, factory made, open rebated and prepared to receive glass/gauge etc. (without sash bar) edge of frames plain, chamfered or rounded, fitted with cut & mitered beads for securing glass/gauge etc size of member as specified in SSR Part I Section 8 clause 8.24(a) and fixed to chowkat(incl two nos 150 mm long extruded aluminium tower bolts, three nos 100mm long medium weight MS butt hinges, two nos 150 mm long extruded aluminium handles, one stopper and one no 300 mm long Aluminum Sliding door boltsand two coats synthetic enamel paint along with one coat of pink primer) complete all as specified and directed by Edngineer-in-Charge. Note :- Rate quoted are deemed to be inclussive of fixture and fittings mentioned to each door shutter and painting .

S& F 30mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.24 (b); supplied and fitted to chowkats (incl two nos 100 mm long extruded aluminium tower bolts, two nos 75mm long medium weight MS butt hinges, 01 nos 125 mm long extruded aluminium handles and two coats synthetic enamel paint along with one coat of pink primer) all as specified and directed. Note :- Rate quoted are deemed to be inclussive of fixture and fittings mentioned to each door shutter and painting

S&F solid PVC door frame (Factory made) of size 50mm x 47 mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, Supply & Fixing in opening, complete all as per specification and as per drawing on Sl page 150 of SSR (Part II)

S&F factory made solid PVC moulded door shutter 28 to 30 mm thick(stile) with 2, 4 or 6 raised pannel design with two mm thick moulded PVC sheet on the front face and 2mm plain colour PVC sheet on back face in frame with particle board core as per specification and drawing complete.

S&F butt hinges medium weight, cold rolled mild steel and fixed size of hinge 100mm complete all as specified and directed by Edngineer-in-Charge.

S&F butt hinges medium weight, cold rolled mild steel and fixed size of hinge 75mm complete all as specified and directed by Edngineer-in-Charge.

S & F 300mm size aluminium alloy, anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolt of extruded section or cast alluminium alloy, complete all as specified and directed by Edngineer-in-Charge.

S&F 200mm long anodised aluminum barrel tower bolt, extruded section complete all as specified and directed by Edngineer-in-Charge.

S&F 125mm long anodised aluminum barrel tower bolt, extruded section complete all as specified and directed by Edngineer-in-Charge.

S&F 100mm long anodised aluminum barrel tower bolt, extruded section complete all as specified and directed by Edngineer-in-Charge.

S&F aluminum alloy handles extruded fabricated type, anodised of 150 mm size complete all as specified and directed by Edngineer-in-Charge.

S&F aluminum alloy handles extruded fabricated type, anodised of 100 mm size complete all as specified and directed by Edngineer-in-Charge.

S & F MS helical door spring 150 mm in repair c complete all as specified and directed by Edngineer-in-Charge.

S&F in repair floor door stopper aluminium body double tounge anodised with hard drawn steel spring 140mm long complete all as specified and directed by Edngineer-in-Charge.

S&F in repairs mild steel 2 lever mortice lock vertical type 100mm complete all as specified and directed by Edngineer-in-Charge.

M&L for preparing new wooden surfaces of any desctiption not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed by Edngineer-in-Charge.

M&L for Preparation of old decorated surfaces(Plastered or unplastered) of wall including cornices, pillasters etc by washing, rubbing down existing treatment and applying two coats of white lime washing, complete all as specified and directed by Engineer-in-Charge.

M&L for Preparation of old decorated surfaces(Plastered or unplastered) of wall including cornices, pillasters etc by washing, rubbing down existing treatment and applying one coats of colour lime washing, complete all as specified and directed by Edngineer-in-Charge.

M&L for Preparation of old decorated surfaces(Plastered or unplastered) of wall including cornices, pillasters etc by washing, rubbing down existing treatment and applying two coats of colour lime washing, complete all as specified and directed by Engineer-in-Charge.

M&L for Preparation of old decorated surface(Plastered or unplastered) of ceiling by washing, rubbing down and stopping of old surface and applying one coat of white lime ash complete all as specified and directed by Engineer-in-Charge.directed.

M&L for Preparation of old painted surfaces of wood of any description over 10 cms width or girth by applying sand paper etc.for proper preparation and applying one or more coat of synthetic enamel paint to give an even and smooth surface having no sign of brush marks all as specified and directed.(Note-Payment shall be made for one coat only ).,complete all as specified and directed by Engineer-in-Charge.

M&L for Preparation of old painted surfaces of steel and iron surfaces of any description over 10 cm width or girth not otherwise described and applying two coat of synthetic enamel paint, complete all as specified and directed by Edngineer-in-Charge.

M & L preparing old surface of wall with sand papers etc. including washing, rubbing, filling holes,and uneven surface, finishing old surfaces with sand papers, filling in wall care putty in holes again sand papering thus making smooth surface to receive a coat of alkali resistant primer over already prepared surfaces of walls and applying one or more coat of oil bound distemper on wall surfaces to give an even and smooth surface using roller brush complete all as specified and directed by Edngineer-in-Charge.

M&L for complete removal of existing treatment from internal surfaces of wall by mechanical sander of berger paints or equivalent makes viz xpress sanding machine having suction vaccum bag or by manual scrapping tools where mechanical removal is not possible and applying a coat of alkali resistant primer over already prepared surfaces of walls applying uniform thickness (avg 2mm thick ) wall care putty on internal surfaces of wall whereever required for preparaing the surface even and smooth and providing two coats of Oil Bound Distemper on wall surface using roller brush complete all as specified and directed by Engineer-in-Charge..

M&L for complete removal of existing treatment of wall and applying one coat of plastic emulson paint upto 1.20m height of wall, complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of old decorated external will surface of existing treatment by scrapping with true care wall sander/Xpress sanding machine having suction vaccume bag or by manual scrapping tool where mechanicla scrapping is not possible & apply two coats of weather proofing exterior emulsion paint over priming coat premium qualityh in 2 mm thick wall care putty all over sandpapering thus making surface smooth complete all as specified and directed by Engineer-in-Charge. Note:- Contracter has to render a FDR @ 10% for the respective item for the period of 5 years

All as per above item No 59 but on newly plastered surface

M & L for 15 mm thick internal rendering cement plaster in cement mortar 1:6 on fair face of brick walls/ concrete surfaces & finished even and smooth without using extra cement,applying three coats of white lime wash on newly plastered wall surface including taking down old plaster complete all as specified and directed by Engineer-in-Charge.

M & L for 10 mm thick rendering cement plaster in cement mortar 1:4 on concrete surfaces of ceiling, chajja and like surface finished even and smooth without using extra cement and applying three coats of white lime wash on newly plastered ceiling surfaces including taking down old plaster on ceiling complete all as specified and directed by Engineer-in-Charge.

M & L for 15 mm thick internal renderingcement plaster in cement mortar 1:6 on fair face of brick walls/ concrete surfaces & finished even and smooth without using extra cement,applying two coats of oil bound distemper with roller brush (white or tinted) over a coat of 2 to 3mm thick chalk whitening wall putty over one coat of alkali resistant primer on plastered surfaces on newly plastered wall surface including taking down old plaster complete all as specified and directed by Edngineer-in-Charge.

M&L Cleaning and removing all marks of OBD and enamel paint and thereafter washing the floor with clean water to maintain the hygeine including removing the dust/marks and cleaning of furniture and laying it out properly at the respective location complete all as specified and directed by Engr-in-Charge.

S & F in repairs GI fittings such as union, Socket, Tee, Elbow, Nipple 4"/ 6", Reducer, Plug, Tank connection of 1/2" in existing pipe line of 15 mm dia without taking down of pipe line in any position/situation complete all as specified and directed by Engineer-in-Charge.

S & F in repairs GI fittings such as union, Socket, Tee, Elbow, Nipple 4" 6", Reducer, Plug, Tank connection of 3/4" in existing pipe line of 20 mm dia without taking down of pipe line in any position/situation complete all as specified and directed by Engineer-in-Charge.

Demolition of Stone slabs and tiles of any description or thickness in floors, Laid, bedded and pointed in any mortar aprons etc complete all as specified and directed by Edngineer-in-Charge..

S&F Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished,light shade, area of each tilesnot exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry andpointed in white or coloured cement to match over 15 mm thick screed bed in CM 1:6 all as specified.

All as per item no. 70 here-in-before but on vertical surfaces of wall as in skiting / dado over 10 mm thick rendering in CM 1:4 including dismantling the existing tiles with screed and removal of malba out of MOD Land complete all as specified and directed by Engineer-in-Charge.

M&L for joint free coloured non skid ceramic tiles 600x600x 7 to 8 mm as in floors, set and jointed in neat cement slurry or adhesive as per manufactures instruction and pointed in white or coloured cement, laid over and incl cement screed bed 15mm thick in CM 1:6 complete all as specified and directed by Edngineer-in-Charge..

All as per item Ser No 72 here in before but 600x100x7 to 8 mm thick on skirting over 10 mm thick rendering in CM 1:4including dismantling the existing tiles with screed and removal of malba out of MOD Land complete all as specified and directed by Engineer-in-Charge.

M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or oloured cement to match laid over and including 15mm thick screed bed or bedding layers in cement mortar ( 1:6) including dismantling the existing tiles with screed and removal of malba out complete all as specified and directed by Engineer-in-Charge.

M&L for coloured glazed ceramic tiles 300x450x6 to 8mm or (300x600mm)x8 to 10mm thick on vertical surfaces on skirting /dados and risers to steps laid and over including rendering 10mm thick cement mortar in CM 1:4 ,including dismantling the existing tiles with screed and removal of malba out of MOD Land complete all as specified and directed by Engineer-in-Charge.

S&F in repair CI floor trap with grating incl jointing to waste pipe fixed in cement concrete type B1 (1:2:4) dia of out let 75mm complete all as specified and directed by Engineer-in-Charge.

S & F in repairs vitreous China coloured European type WC with "P" or "S" trap for 100 mm bore , including connection to drain and to flushing cistern with pipe 32mm dia PVC pipe and fixing bolts complete all as specified and directed by Engineer-in-Charge.

S & F in repairs vitreous chinaware coloured wash hand basin of size 550mm x 450mm complete including , CP Waste coupling , PVC waste pipe ,complete fixing arrangement and cutting for and pinning in walls & making good complete all as specifed and directed by Engr in charge

S&F in repair vitreous china squatting pan of orissa pattern long pan size 510 x 400 mm white with "p"or "S" trap front or back inlet and integral foot rest any pattern (excluding flushing cistern and flush pipe) complete all as specified and directed by Engineer-in-Charge.

S&F in repair plastic water closet seat cover/white closed pattern with flat bottom and cover and mild steel C hinges as per ISI complete all as specified and directed by Engineer-in-Charge.

S & F in repairs 10 ltrs PVC (White) valve less syphonic action type, flushing cistern low level with inlet ball valve float, handle, fixing with gitties embeded in wall with drilling machine etc complete all as specified and directed by Engineer-in-Charge.

S&F in repairs bib tap with crutch or butterfly handle, screwed down, screwed for iron pipe, 15mm dia, fancy type, cast copper alloy, chromium plated long body with flange complete all as specified and directed by Engineer-in-Charge.

S&F in repair fancy type chromium plated brass angle valve type suitable for 15mm bore pipe complete all as specified and directed by Engineer-in-Charge.

S&F in repair PVC connection pipe of 1/2"x18" size with 2 Nos brass check nuts with washers, complete all as specified and directed by Engineer-in-Charge.

S&F in repair Health faucet, CP brass with 1.50m long flexible pipe complete all as specified and directed by Engineer-in-Charge.

S & F in repair fancy type 125mm size square brass CP shower rose complete all as specified and directed by Engineer-in-Charge.

S&F in repair of PTMT bib tap fancy type with flange 15mm dia screwed for iron pipe or for brass ferrule complete all as specified and directed by Engineer-in-Charge.

S&F in repair CP grating 125mm dia, complete all as specified and directed by Engineer-in-Charge.

S&F in repairs fancy type looking mirror of size 600x450x6mm with 100 mm wide fancy type border fixed with 4 Nos stainless steel clips complete all as specified and directed by Engineer-in-Charge.Make : Prayag, Atul, Commander

S & F in repair Glass Corner Shelf 8mm thick including CP railing radius 250mm complete all as specified and directed by the Engineer-in-Charge.Make Cardin or equivalent to ISI marked

S&F in repairs Glass shelf assembly 450mm long 150mm wide with cp railing complete all as specified and directed by Engineer-in-Charge. Make Cardin or equivalent to ISI marked

S & F in repairs 15 mm dia Brass CP three-in-one wall mixer for mixing hot & cold with L bend water screwed down for iron pipe and fixed complete all as specified and directed by Engineer-in-Charge.

S & F in repairs 15 mm dia Brass CP WHB Mixer for mixing hot & Cold water screwed down for iron pipe and fixed complete all as specified and directed by Engineer-in-Charge.

Demolition of cement concrete (reinforced) as in slab or roof parapet,fins, facia, chajja, beams, etc and similar work (reinforcement cutting as required to facilitate the demolition) upto 5 to 6 storey bldg on roof including scaffolding and removal of debris on daily basis out of MoD land. Note (a) Proper netting shall be used during the demolition and execution of work so that the demolished materials and other construction material may not fall from the building end safety of sassests & human life is guarded. (b) Safety arrangements as per standard engineering practice shall be made during the whole period of execution of work by the contractor at his own cost for the occupants & for his workers/labours and nothing extra shall be paid on this account including any damage if occurs shall be complete responsibility of contractor. (c) It shall be the sole responsibility of contractor that during execution of work on roof top if any damage occured to building or otherwise , the same shall be made good by contractor at his risk cost and nothing shall be paid extra for this.

M&L chipping out, roughening and cleaning spalled/ loose concrete as in RCC columns, beams, slabs, chajjas, parapets, fins and the like members upto 25 mm avarage thickness, washing with water and allowed to dry including derusting existing reinforcement with approved chemical. Supply and fix Mild Steel square wire mesh 65x65x2mm as strengthening reinforcement, applying anti-rust chemical on new wire mesh and guninting chipped surfaces upto 25mm (average) thick with pressure of 2.5 to 3.00 kg/Sqcm, using one part of OPC 43 grade cement and two parts of Ghaggar sand mixed with approved admixture and achieving an even surface including rendering 15mm thick plaster with CM 1:4 finished even smooth without using extra cement finished even and smooth surface . Work to be carried out in patches for buildings upto 18 meter height. Anti-rusting, adhesive, admixure chemical shall be of apporved make and incorporated as intructed by the manufacturer for specific application complete all as specified and directed by Edngineer-in-Charge..

M & L for 16-18 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over screed bed 20 mm thick complete all as specified and directed by Engineer -in-Charge.

S&F Powder coated 50 micron, anodised aluminium doors, windows and ventilator shutters, side hung type with sash bars, purposely made for fixing window type air conditioners, exhaust fans etc; aluminium section weighing 0.55 kg/m including two nos of aluminium coated 100 mm long tower bolt, one nos 100 mm long aluminium handle , one nos 150 mm long Aluminium peg stay, two or three nos aluminium coated 100 mm long hinge , rubber beading , in each window/door shutters complete all as specified and as directed

S & F Powder coated 50 micron, anodised aluminum frame for doors, windows, ventilators with one or more rebates incl grills (as desired), joining cleats for fixing etc complete all as specified.

S & F 4 mm sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified and directed by Edngineer-in-Charge.

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with steel wire staples, complete all as specified and directed by Edngineer-in-Charge.

S&F 18/19mm thick PVC moulded solid board one side prelam for cabinet boxes etc with self and shutter full size fitted under/above the kitchen cooking platform and other cabinets complete incl dismantling of old wooden racks, showcase and cabinets all as specified and directed

S&F 75 mm long L Bihari concealed type hydrauilc hinges incl stainless screw complete all as specified.

S&F Hasp and staple, 75mm size, safety type, brass with mild steel hinge pin including bolt to hinge plate & fixed with screws, complete all as specified.

S&F 75mm long, extruded fancy type SS handle for kitchen cup boards shutters, cabinets, crocery shelf drawers fixed with nuts , screw and washer of mild steel bright finished , complte all as specified.

S&F ball catches with 8mm dia steel ball and brass body and striking plate including letting in and fixed, complete all as specified.

S & F in repair Stainless steel drapery Rod 20 mm of dia ,with bracket including premium balls complete all as specified and directed by Engineer-in-Charge.

Hacking out old broken glass of any thickness size quality or description from wooden frames /Aluminium frame fixed with wooden beads/aluminium beads incl S&F in repair 4.00 mm thick sheet galss ordinary quality and glazing with wooden bead/aluminium beads, complete all as specified

S&F in repair stainless steel sink with drainage board made out of 1.00mm thick sheet for kitchen with plug, washers, waste pipe including connecting union overall size 1145mm x 510mm x 200mm with bowl size 510mm x 400mm x 200 mm including taking out existing unserviceable drainage board complete all as specified and directed by Edngineer-in-Charge.

M&L for 16-18mm thick Udaipur green Marble laid oveor & inclcudign 15mm thick surface bed in CM 1:6 in tread/riser & landing including jointing moulding & granite polising laid in design complete all as specified and directed by Engineer-in-Charge.

S&F in repairs Stainless Steel plate rack of size 90x80x25cm made with 1.00 mm thick sheet including taking out existing plate rack, complete all as specified and directed by Edngineer-in-Charge.

Note :- Total amount of Sch of credit is Rs. 76885.00 as per Sch of credit. Net contract sum shall be total quoted amount of bidder (-) amount of Sch of credit.

JIWAN DASS THAREJA AND SONS

SK Engineers

S D Constructions

Shivam Firetech Engineers

M/S ANIL KUMAR