Interior fitout work in the office space of Agriculture insurance company of India Limited at Panchkula and Lucknow

3 Grand Total incl GST 23,885,844.00

CEMENT CONCRETE : Providing and laying in position CEMENT CONCRETE of specified grade exluding the cost of centring and

shuttering-all work upto plinth level.

4.1.8 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) CUM 8.00 6,812.00 54,496.00

VITRIFIED TILES : Providing and laying vitrified floor and wall tiles in different sizes (thickness to be specified by the manufacturer) with

water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement

mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and

1.04 matching pigments etc., complete. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the

notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.

VITRIFIED TILES : Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption

less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of

cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement &

matching pigments etc. complete.

ALUMINIUM SKIRTING: Supply of 100mm Aluminium (Grade 6063) Skirting with 15 micron anodising In Natural Finish. Thickness 1.30 to

1.09 MR 1.50mm. Designed to conceal screws. Seamless finish. Complete with Rubber/ PVC Jointers and Gasket. Metre 35.00 290.00 10,150.00

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including

1.10 11.3 cement slurry, but excluding the cost of nosing of steps etc. complete.

11.3.1 40 mm thick with 20 mm nominal size stone aggregate SQM 0.00 614.20 0.00

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity

counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement

1.11 8.2 mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing,

curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels.

8.2.2 Granite stone slab of colour black, Cherry/Ruby red

TOTAL FLOORING WORKS 259,095.30 10,150.00

2 FALSE CEILING WORKS

GYPSUM BOARD CEILING : Providing and fixing false ceiling at all height including providing and fixing of frame work made of special

sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and

consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange

fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of

25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels

45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with

tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I.

intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter

2.01 12.45 channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of

rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and

perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of

tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers

covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also

including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all

complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with

12.45.1 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks) SQM 55.00 1,355.80 74,569.00

ACOUSTIC CEILING: Providing and fixing suspended Demountable acoustic ceiling in recessed grid system 300 x 1200 x12.5mm E with

Unity 3,square 3.5mm holes, with 0.80 NRC* Material: High Grade Glassfiber Reinforced Perforated plasterboard with Cleaneo Technology

Board type: Ceiling tile Length x width x thickness: 300x1200x12.5mm Edge: E recessed grid system (8mm recess)

Perforation: Unity 3, 3.5x3.5 Surface: Water-based acrylic paint ,Colour: White NCS 0701 Y24R, closet match to RAL 9003; gloss 5

TOTAL FALSE CEILING WORKS 74,569.00 156,975.00

Digitally signed by AMIT

S NO DSR/ MR DESCRIPTION UNIT QUANTITY RATE

DSR ITEM NON DSR ITEM

3 WALL FINISHES WORKS

GLASS PARTITION (FIXED GLASS PARTITION WITH 10MM GLASS): Providing & Fixing of Modular Single glazed partitioning frame

make 45mm System, Using KL 45 001 (45mm x 25mm) as wall starter section, Using KL 45 001 & KL 45 002 (45mm x25mm) as Top &

3.01 MR bottom channel. Toughened Glass of thickness 10mm to be installed with required accessories ie glass to glass aluminium I sections, T SQM 20.00 4,400.00 88,000.00

section & 90 degree sections as per the requirement & Glass packing to adjust the floor level. Insertion of silicon/Thermoplastic gasket to

adhere the glass firm & airtight. Partition Height Considered is 2500mm

FRAMELESS HINGED GLASS DOOR: Providing & Fixing of Modular Aluminium single leaf Stile door frame of make 45 mm System duly

Anodized Aluminium Sections using KL 45 001 & KL 45 003 (45mm x 45mm) and Stile door of size 60x35mm as door frame with

3.02 MR Toughened Glass of Thickness 10 mm. Hardware as per make list and Lever Handle with Mortise Lock, Exposed Door Closer, Set of 4

Hinges, Door Stopper and required accessories ,Silicone/Thermoplastic Gaskets & Screw Caps.

WOODEN DOOR FRAMES : Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and

9.1 fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for

9.1.1 Second class teak wood CUM 1.00 142,949.70 142,949.70

FLUSH DOOR SHUTTERS : Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of

9.21 block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands

3.05 and face veneers on both faces of shutters:

9.21.1 35mm thick including ISI marked Stainless Steel butt hinges with necessary screws SQM 9.00 2,392.65 21,533.85

WOODEN LIPPING : Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters

(over all area of door shutter to be measured).

Providing and Fixing 22x922 mm D-type Handle Material : Stainless Steel. Finish : Satin Stainless Steel (SSS). of approved make and

model all complete as per the direction of Engineer-in-charge.

Providing and Fixing SS Mortise Lock Body SB/TB for door thickness 25-50 mm for of approved make and model all complete as per the

direction of Engineer-in-charge.

Providing and Fixing Double cylinder Floor Spring- with Closing Force EN 3 with Maximum door weight 105 Kg. Maximum door width

950mm.Closing speed : 130°

Final closing speed : 15-0°. Hold Open (standard): 90° hold open. Weight of floor spring approx : 6kg, 5,00,000 cycles Tested with 5 Years

Warranty against manufacturing defect. CE certified for wooden doors all complete as per the direction of Engineer-in-charge.

Providing 40x5mm flat iron hold fast 400mm long including fixing to frame with 10mm diameter bolts, nuts and wooden plugs and embedding

3.10 9.53 in cement concrete block 300x100x150 mm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). EACH 32.00 228.85 7,323.20

GLASS FILMS: Providing & Fixing Frosted Translucent, cast PVC, self-adhesive vinyl, special CRYSTAL-effect film to reproduce Sand-

blasting effect on glass with customised designs, thickness of 2 mil (0.05mm) without adhesive & 3mil (0.8)with adhesive having minimum

3.11 MR tensile strength of 3.5 pound/inch at 73 F(0.6 kg/cm at 23 C). Adhesion after 24hrs of installation should be 4 pounds/inch (0.7 kg/cm) on SQM 33.00 1,200.00 39,600.00

Acrylic, Glass Polycarbonate: MCS warranty of 3yrs (if exposed to direct sunlight) to 15yrs (indoors). Contractors payment wouldn't be

released until & unless he/she produces orginal warranty certificate from the manufacturer.

ACOUSTIC PANELLING: PET Panels made of Polyester in size 2440x1220 mm with thicknesses of 9mm. Density is 1650 gsm for 9mm.

The panel can plain/printed/ embossed/ customized to form different patterns. Panels can be cut to customize shape and size to make

different patterns. The acoustic panels should have an NRC of up to 0.3-0.6 Bollard PET Panels should be made of recycled material and

3.12 MR should be 100% recyclable. The panels need to be installed as per approved pattern and color on a plain wall. The panel needs to be glued SQM 10.00 2,620.00 26,200.00

or nailed with headless nails. Thickness: 9 Sheet Size: 2440mm x 1220mm Tolerance: +/- 5% Density: 1650 gsm Fire Resistance: EN13501

– Class B s1, d0(SGS) NRC: 0.3 – 0.6mm, depending on the air gap between the wall and the panel Shades: 36 shades available Material:

LACQUERED GLASS: Providing and fixing of 6 mm thick premium GRIHA rated Lacquered glass of approved color by Client / Engineer in

charge, fixed with compatible neutral grade silicon on a perfectly levelled 12mm thick water proof marine plywood / MDF / Mineral fibre

board which is mounted on RCC wall/any other structure. Lacquered glass must be made industrially (using curtain coating process); opaque

(if viewed against a support wall), uniformly coated with PU lacquer (50 micron thick coating or more); panel to panel colour consistency

(measured by photo spectrometer); highly durable (passes hardness test for minimum 220 oscillations); humidity resistance (conforms to

BS EN 1036 1999 or equivalent) ; environmentally friendly having Low VOC (no lead, no arsenic, no copper, no formaldehyde), low VOC

content <100g/l. Silicone used should not react with lacquer coating (compatible neutral cure silicon)

Digitally signed by AMIT

S NO DSR/ MR DESCRIPTION UNIT QUANTITY RATE

DSR ITEM NON DSR ITEM

GYPSUM BOARD PARTITION: Providing and fixing partition upto ceiling height consisting of G.I. frame and required board, including

providing and fixing of frame work made of special section power pressed/ roll form G.I. sheet with zinc coating of 120 gms/sqm(both side

inclusive), consisting of floor and ceiling channel 50mm wide having equal flanges of 32 mm and 0.50 mm thick, fixed to the floor and ceiling

at the spacing of 610 mm centre to centre with dash fastener of 12.5 mm dia meter 50 mm length or suitable anchor fastener or metal screws

with nylon plugs and the studs 48mm wide having one flange of 34 mm and other flange 36 mm and 0.50 mm thick fixed vertically within

flanges of floor and ceiling channel and placed at a spacing of 610 mm centre to centre by 6 mm dia bolts and nuts, including fixing of studs

9.105 along both ends of partition fixed flush to wall with suitable anchor fastener or metal screws with nylon plugs at spacing of 450mm centre to

3.14 centre, and fixing of boards to both side of frame work by 25mm long dry wall screws on studs, floor and ceiling channels at the spacing of

300mm centre to centre. The boards are to be fixed to the frame work with joints staggered to avoid through cracks, M.S. fixing channel of

99mm width (0.9mm thick having two flanges of 9.5mm each) to be provided at the horizontal joints of two boards, fixed to the studs using

metal to metal flat head screws, including jointing and finishing to a flush finish with recommended jointing compound, jointing tape, angle

beads at corners (25 mm x 25 mm x 0.5 mm), joint finisher and two coats of primer suitable for board as per manufacturer's specification and

direction of engineer in charge all complete.

75mm overall thickness partition with 12.5mm thick double skin fire rated Glass Reinforced Gypsum (GRG) plaster board conforming to IS:

2095: part 3 (Board with BIS certification marks)

ROLLER BLINDS : Providing & supplying of Window Blinds as per the approved sample in required shade and style consisting, of Roller

Blinds comprising of optima screen Fabric comprising of 22% polyester, 78% PVC, Fabric weight 460-480G weight per sq m, Thickness 0.67

mm, Yarn count 18-19/cm, having fire resistance standard – NFPA 701-89 small testing ISO-5659-2 .The tear resistance should be

complying to ISO4674 & breaking resistance – ISO 5081. The DRIVE UNIT shall be of clutch for quick,easy and safe installation,moulded

plastic with steel spring support and inserted into the tube end. It shall be driven by a ball chain pulley with ball chain and can be positioned

at right side or left hand side of the Shade. The Shade when lowering or raising, shall be automatically locked in position upon release of the

ball chain by means of a built in friction lock.Universal clutch for left and right hand operation.Chain Gear Ratio of 1.75:1.The END PLUG

shall be molded of plastic witha steel location pin. The plug shall be inserted into the tube end. (Opposite to the Drive Unit) for ease of

3.16 MR installation. TheSUPPORT BRACKETS shall be of coated steel & provided with covers and used in right hand or left hand positions SQM 26.00 1,871.00 48,646.00

differentiated by the acceptance of the of the rectangular drive unit support or the round idler plug pin.Can beinstalled (a) On Face (b) Ceiling

Mount (c) On Frame (d) in Recess. The Bracket should be protruding outside maximum of80mm.The ROLLER TUBE shall be of extruded

aluminum with 37mm internal diameter & skin thickness of 1mm and shall incorporate a key way integral with the tube to accommodate the

spline. The BOTTOM RAIL shall be a Flat Bottom made up of powder coated steel. The BALLCHAIN shall be 2mm diameter cord with

4.5mm diameter acetal balls moulded co-axially to it on 6mm pitch to form an endless ballchain.It is used for raising or lowering action of the

shades.hall be suitable for sill, face or side facing. Cord Equalizer shall be injection melded from impact modified acrylic with a high flexural

PELMET: Providing and fixing 18 mm thick, 150 mm wide pelmet of flat pressed three layer or graded plain wood particle board medium

density grade I, ISi marked and conforming to IS : 3087 marked, including top cover of 6 mm commercial ply wood conforming to IS: 303

3.17 9.42 BWR grade, nickel plated M.S. pipe 20 mm dia ( heavy type) curtain rod with nickel plated brackets, including fixing with 25x3 mm M.S. flat RM 11.00 600.55 6,606.05

10 cm long fixed to pelmet with hollock wood cleats of size 100 mm x 40 mm x 40 mm on both inner side of pelmet and rawl plugs 75 mm

long etc. all complete.

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to

3.18 floor V level.

6.13.2 Cement mortar 1:4 (1 cement :4 coarse sand) Sqm 5.00 1,123.80 5,619.00

3.19 6.15 Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry. Sqm 5.00 104.80 524.00

13.4 12 mm cement plaster of mix :

3.21 13.26 Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. Sqm 74.00 262.70 19,439.80

Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali

13.48A & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives

New work (Two or more coats applied @ 1.43 litre/10 sqm) over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm.

PLY: Providing and fixing plain lining with necessary screws/ nuts & bolts/ nails, including a coat of approved primer on one face, and fixed

3.23 on wooden/ steel frame work, complete as per direction of Engineer-in-Charge

9.140.1 12mm thick commercial ply conforming to IS : 1328 BWR type SQM 141.00 1,224.65 172,675.65

4MM THICK MDF BOARD: Providing and fixing plain lining with necessary screws/ nuts & bolts/ nails, including a coat of approved primer

3.24 MR on one face, and fixed on wooden/ steel frame work, complete as per direction of Engineer-in-Charge

4mm thick MDF Board SQM 103.00 270.00 27,810.00

ALUMINIUM FRAME: Providing and fixing partition, frame work in 50x25x1.5mm Aluminium Section placed at 600mm centre to centre both

3.25 MR ways (horizontal & vertical) fastened to floor, ceiling and horizontal member. The item includes providing and fixing 50mm thick polyester SQM 96.00 1,347.00 129,312.00

synthetic insulation as insulation of 100 GSM.

Digitally signed by AMIT

S NO DSR/ MR DESCRIPTION UNIT QUANTITY RATE

DSR ITEM NON DSR ITEM

LAMINATE: Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density

3.26 9.127.2 protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved SQM 120.00 897.30 107,676.00

quality. 1MM THICK

3.28 Extra for providing vision panel not exceeding 0.1 sqm in all type of flush doors (cost of glass excluded) (overall area of door shutter to be

9.24.1 Rectangular or square SQM 9.00 199.15 1,792.35

3.29 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc.

21.3 complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic

21.3.3 With float glass panes of 8 mm thickness (weight not less than 20 kg/sqm) SQM 2.00 1,685.40 3,370.80

3.3 Providing and fixing thermal insulation with Resin Bonded Fibre glass wool conforming to IS: 8183 having density 24 kg/m3, 50 mm thick,

12.57 wrapped in 200G Virgin Polythene Bags fixed to wall with screw, rawel plug & washers and held in position by criss crossing GI wire etc. SQM 96.00 358.50 34,416.00

complete as per directions of Engineer-in-Charge.

3.31 Providing and fixing carbon steel galvanised ( minimum coating 5 micron) dash fastener of 10 mm dia double threaded 6.8 grade (yield

10.27 strength 480 N/mm2), counter sunk head, comprising of 10 mm dia polyamide PA 6 grade sleeve, including drilling of hole in frame ,

concrete/ masonry, etc. as per direction of Engineer-in-charge.

TOTAL WALL FINISHING WORKS 618,630.15 621,002.00

4 MISCELLANEOUS WORKS

MODULAR KITCHEN - UNDER COUNTER STORAGE CABINETS:

Providing & fixing factory made modular kitchen cabinets in modular type knockable cabinet boxes with openable shutters and sufficient

number of drawers made of 18 mm thk. ISI Marked comm. ply, all ply to be laminated with 0.8 mm laminate.All shelves should be supported

on approved quality SS pins and shall be adjustable for different heights as per requirements.Shutters and drawers fascia shall be at least

18mm thic with laminate on both sides with 18mm wide 2mm thick PVC edge banding, All Shutters finished in high gloss acrylic of

4.01 MR approved. The cabinet boxes of floor units will be supported by 100mm height vertical adjustable legs which will be covered with PVC skirting SQM 0.00 6,406.00 0.00

in brushed aluminum finish attached by hardware of skirting. The unit shall be fixed to the floor/ wall/ slab using metal screws of appropriate

size and rawl plugs. Only front face area of cabinets and skirting from floor to top of boxes shall be considered for measurement and

payment. Cabinet boxes size would be varies from 400x560x710MM to 1000x560x710MM (approx.) and join together as per site

requirements etc.

MODULAR KITCHEN - OVERHEAD STORAGE WALL UNITS:

Providing & fixing factory made modular kitchen cabinets in modular type knockable cabinet boxes with openable shutters and sufficient

number of drawers made of 18 mm thk. ISI Marked comm. ply. All ply to be laminated with 0.8 mm laminate.All shelves should be supported

on approved quality SS pins and shall be adjustable for different heights as per requirements.Shutters and drawers fascia shall be at least

4.02 MR 18mm thic with laminate on both sides with 18mm wide 2mm thick PVC edge banding, All Shutters finished in high gloss acrylic of SQM 0.00 5,125.00 0.00

approved. The unit shall be fixed to the floor/ wall/slab using metal screws of appropriate size and raw plugs. Only front face area of cabinets

and skirting from floor to top of boxes shall be considered for measurement and payment. Cabinet boxes size would be varies from

400x560x710MM to 1000x560x710MM (approx.) and join together as per site requirements etc.

4.02A MR Providing and fixing of Innotech with metal sides and quadro channels Each 0.00 3,548.00 0.00

4.02B MR Providing and fixing baskets Each 0.00 4,013.00 0.00

WATERPROOFING: Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen

and the like consisting of: (i) Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS 2645

in recommended proportions including rounding off junction of vertical and horizontal surface. (ii) IInd course of 20 mm cement plaster 1:3 (1

cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and

horizontal surface. (iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of area. (iv) IVth course of 400 micron

thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqm).

DISMANTLING: Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of

4.05 MR unserviceable surplus material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-Charge. LS 1.00 100,000.00 100,000.00

TOTAL MISCELLANEOUS WORKS 0.00 100,000.00

5 DECK ROOFING WORKS

Digitally signed by AMIT

S NO DSR/ MR DESCRIPTION UNIT QUANTITY RATE

DSR ITEM NON DSR ITEM

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas,lintels,

bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering,

5.01 5.3 finishing and reinforcement with 1:1.5:3 (1 cement: 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm CUM 3.00 11,505.50 34,516.50

nominal size derived from natural sources).

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.

5.22A.6 Thermo-Mechanically Treated bars of grade more. Fe-500D or more. Kg 374.00 107.85 40,335.90

Providing and fixing roofing consist of 0.8 mm thick galvanized steel deck sheet confirming to IS 277:1992 used as permanent shuttering

over which MS wire mesh 3 mm laid at 100x100 mm grid including edge trim covered with concrete. This metal deck will be supported on

structural steel beam with shear studs. (Structural steel like Beam, column, joists etc. & concrete of different grade as per design will be paid

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and

applying a priming coat of approved steel primer all complete.

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and

applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.

10.16.2 Hot finished seamless type tubes Kg 1077.00 206.35 222,238.95

5.06 13.62 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :

13.62.1 Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture SQM 30.00 226.25 6,787.50

TOTAL RCC WORKS 399,650.65 0.00

Digitally signed by AMIT

SCHEDULE OF QUANTITIES - ELECTRICAL WORKS

DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

S NO UNIT QUANTITY RATE

2022 DSR (INR) NON-DSR (INR)

A POINT WIRING

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC

insulated copper conductor single core cable in surface / recessed medium class PVC conduit,

1.10 with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS

PVC insulated copper conductor single core cable etc as required.

Wiring for group controlled (looped) light point/ fan point/call bell point (without independent switch

etc.) with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface /

1.55 recessed PVC conduit, and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper

conductor single core cable etc as required.

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core

A.3 1.12 cable in surface/ recessed medium class PVC conduit alongwith 1 No 4 sq. mm FRLS PVC Metre 810 334.00 270540.00

insulated copper conductor single core cable for loop earthing as required.

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box

1.24 including connections but excluding modular plate etc. as required.

1.24.4 3 pin 5/6 amp socket outlet Each 110 122.00 13420.00

1.24.5 6 pin 15/16 amp socket outlet Each 6 197.00 1182.00

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding

A.6 1.26 modular plate as required. Each 10 40.00 400.00

Supplying and fixing following size/module, GI box along with Modular base & cover plate on

existing modular metal boxes etc. as required.

B SUBMAIN AND CONTROL WIRING

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC insulated

1.14 copper conductor, single core cable in surface/ recessed medium class PVC conduit as required

1.14.1 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire Metre 5 233.00 1165.00

1.14.2 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire Metre 80 275.00 22000.00

B.1 2 X 4 sq. mm + 1 X 4 sq. mm earth wire

1.14.4 2 X 6 sq. mm + 1 X 6 sq. mm earth wire Metre 5 439.00 2195.00

1.14.10 4 X 10 sq. mm + 2 X 6 sq. mm earth wire Metre 10 1005.00 10050.00

1.14.11 4 X 16 sq. mm + 2 X 6 sq. mm earth wire Metre 10 1365.00 13650.00

1 Digitally signed by AMIT

Supplying and making end termination with brass compression gland and aluminium lugs for

9.1 following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV

C.1 grade as required.

Supply of following XPLE armourned 1.1 KV grade conforming to I.S.7098/1554Aluminium

Conductor Cables :

MR Supply of following sizes of PVC sheathed PVC/XLPE insulated Aluminium conductor armoured

C.2 cable of 1.1 KV grade conforming to IS:7098 part-1 / IS:1554 part-1 respectively & ISI marked.

(d) 3.5 C x 50 Sqmm XLPE cable RM 10 510.00 5100.00

(e) 3.5 C x 35 Sqmm XLPE cable RM 10 378.00 3780.00

Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker

2.10 suitable for inductive load of following poles in the existing MCB DB complete with connections,

D.2 testing and commissioning etc. as required.

Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB

complete with connections, testing and commissioning etc. as required.

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB

distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus

2.4 bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But

D.4 without MCB/ RCCB/ Isolator)

MR 12 way (4 + 36), Double door Each 2 9081.00 18162.00

Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts, residual

2.14 current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing

MCB DB complete with connections, testing and commissioning etc. as required.

E PROVISIONS FOR VOICE, DATA, SECURITY & TV SYSTEMS

Supplying and fixing following modular switch / socket on the existing modular plate & switch box

1.24 including connections but excluding modular plate etc. as required.

1.24.7 TV socket outlet Set 3 148.00 444.00

1.24.6 Telephone socket outlet Set 27 148.00 3996.00

Supply, Installation, Testing and Commisioning of Galavanized Iron (GI) Raceways along with

MR required suitable number of GI couplers for joining raceways and fixing GI brackets and all

accessories complete in all respect as per the directions of engineer in charge

2 Digitally signed by AMIT

(a) 300mmx38mm(GI) - 3 compartment Mtr 2 1639.26 3278.52

E.9 (b) 225mmx38mm(GI) - 3 compartment Mtr 2 1339.36 2678.72

Supply, Installation, Testing and Commisioning of Junction boxes for direct access to cables at

the intersection of raceways supplied completely with base and cover plates, height adjustable

MR junction box 65- 90 mm including all accessories ss plate of 3mm thick complete in all respect as

per the directions of engineer in charge

Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE

E.11 1.19 insulated, shielded with fine tinned copper braid and protected with PVC sheath in the exisitng Meter 90 47.00 4230.00

surface/recessed steel/ PVC conduit as required

Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper

1.18 conductor, unarmoured telephone cable in the existing surface/ recessed steel/ PVC conduit as

Supplying and fixing of following sizes medium class PVC conduit aong with accessories in

1.21 surface/ recess including cutting the wall and making good the same incase of recessed conduit

Supplying and Installation of following size perforated of painting with powder coating M.S. cable

trays of perforation of not more than 17.5% in convinient sections, joined with connectors

E.13 suspended from the cieling with MS suspenders including bolts and nuts painting suspenders etc

4.1.6 450 mm width x 50 mm depth x 2 mm thickness Metre 2 1137.00 2274.00

Earthing with GI earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing

F.1 5.4 masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre SET 2 6256.00 12512.00

long etc. with charcoal/ coke and salt as required.

Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as

F.4 5.16 Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required. MTR 100 70.00 7000.00

G PANEL BOARDS

3 Digitally signed by AMIT

Fabricating, Installing, Testing & Commissioning of automatic mains failure control

including auto by-pass panel, suitable for 125 KVA silent type DG set complete with relays,

timers, set of CTs for metering & protection and energy analyser to indicate currents,

phase and line voltages, frequency, power factor, KWH, KVARH & provision for overload,

short circuit, restricted earth fault, under frequency, control cabling from AMF panel to

diesel engine and elsewhere if required, all complete and inter locking including the

following:sheet steel cubicle type panels fabricated from 14 guage thick CRCA sheet,

dust and vermin proof, indoor type MV Panels with hinged lockable doors fabricated from

2mm thick CRCA sheet, suitable for 415V, 3 phase 4 wire 50Hz AC supply with rear /

bottom access for cable alley and with segregated bus-bar chamber and including

supplying and fixing following switchgears, meters and accessories, inter-connections,

bonding to earth, bottom base channel of MS section not less than 100mmx50mmx5mm

(thick). Fabrication shall be done in transportable section ,entire panel shall have a

common earth busbar at rear with 2 nos earth stud cable alleys, cable gland plates

powder coated painting of approved shade after antirust treatment (with min seven

tanks ) and marking as specified. Switch boards complete as per schematic diagram:

Colour: Gray Powder Coated, as per approved sample.

Note: All MCCBs of 250 amps and below rating shall be provided with thermal

100 Amps. & pole

Four MCCBs aboveCase

Moulded 250 Circuit

Breakershall be breaking

of fault provided capacity

1nos, ICU upFour

100 Amps. to 433 V)Moulded

pole completewith

Case extended Rotary

Circuit Breaker ofMechanism andcapacity

fault breaking Spreader36Link

Nos. 300 Amp. to volt

V) completewith

3 duty 4 pole extended

contactor Rotary

- 2nos Mechanism and Spreader Link

1 No. 300 A 415V, AC , 4P Manual Changeover with Operating Handle

Auto/Manual/Test/Off selector switch

2 Nos. over voltage relay, 2 Nos. reverse power relay and 2 Nos. under voltage relay.

G.1 MR 3 Sets of current transformers 15 P 10 accuracy for protection and 15 VA class-I for

Energy analyser unit to indicate current voltage frequency power factor and KWH

Indicating lamps for load on mains and load on set

Fuse for instruments

Battery charger, complete with transformer/rectifier, D.C. voltmeter and ammeter,

supply for trickle,

failure monitor off and boost and current adjustment.

Supply Failure Timer

Restoration Timer

Control unit with three impulse automatic engine start/stop and failure to start lockout

Impulse counter with locking and reset facility.

ON/OFF/Control circuit switch with indicator

Audio/Video annunciation for.

(i) High water temperature

(ii) Low lubricating oil pressure

(iii) Engine over speed

(iv) Engine fails to start

(v) Full load/maximum load warning

4 Digitally signed by AMIT

TPN aluminum bus bars of minimum of 250 Amps capacity with heat shrinkable colored sleeves

and I/C DMC/SMC bus bars supports at required intervals complete for cross section, size

supports & their spacing etc. for withstanding fault level of 25 MVA for 1 Sec.

(a) 63 Amps, TPN, MCB -2 Nos.

(b) 40 Amps, TPN, MCB - 4 nos

Panel complete as above Each 1 130000.00 130000.00

Providing and fixing MV danger notice plate of 200mm x 150mm made of mild steel, atleast 2 mm

16 2.21 thick, and vitreos enamelled white on both sides and with iscription in single red colour on front Nos. 2 269.00 538.00

side as required

MR Supply, Installation, Testing and Commissiong of 7.5 KVA UPS 3Phase Input - 3Phase Output

with Batteries:12 V, SMF Amararaja/Exide with minimum VAH capacity of 15600 suitable for 15

minutes backup with each ups Along with Accessories Rack, Interlinks, SFU, Parallel Kit, DC

Cable Upto 5 Meters complete in all respect as per the directions of the engineer in charge. UPS

should have availability of Input /Output isolator, Inbuilt manual bypass along with phase

sequence corrector. UPS Efficiency shall not be less than 94% from 25% to 100% Load

Total of Electrical items 587301.00 464462.10

5 Digitally signed by AMIT

SCHEDULE OF QUANTITIES - HVAC WORKS

DSR HVAC TOTAL

S No 2019/DSR DESCRIPTION UNIT QUANTITY RATE AMOUNT

EM 2018 DSR (INR) NON-DSR (INR)

Supply Installation, Testing & Commissioning of modular type Variable Refrigerant Flow/Variable

Refrigerant Volume air cooled Outdoor units suitable for cooling and heating, having all

hermetically sealed inverter type Scroll Compressor(s), minimum two compressors for above 14

HP modules, microprocessor based Controller, top discharge type condensing unit(s), with R 410

A Refrigerant, vibration isolators, with suitable foundation etc. complete as required. The unit

1 1.0 shall deliver the rated capacity at AHRI Conditions and work even at 50°C ambient temperature per HP 15 16415.00 246225.00

without tripping. The unit shall be suitable to work on 400V +/- 10%, 3 Phase, 50Hz AC power

supply. The unit shall be filled with first charge of the refrigerant and ready for use as required.

The COP at AHRI conditions shall not be less than 3.1 and IEER not less than 6.5 .

Supply, installation, testing and commissioning of following minimum capacity 4-way flow

VRV/VRF Cassette Type Indoor ceiling mounted unit equipped with synthetic washable media

pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil

section with DX Copper coil, electronic expansion valve, outer cabinet, drain pump, grill,

necessary supports, vibration isolation, cord less remote control etc., suitable for operation on

single phase 230 V ± 10%, 50Hz AC supply, complete, as required. The unit shall have

automatic force shut down provision in case of fire on receiving signal from BMS System. The

cooling capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19 Degree C

WB temperature.

Supply, installation, testing and commissioning of following minimum capacity VRV/VRF High

wall type Indoor unit equipped with washable synthetic media pre-filter, fan section with low noise

fan/dynamically balanced blower, multispeed motor, coil section with DX copper coil, electronic

expansion valve, outer cabinet, cord less remote control, drain pan, necessary accessories etc.,

3 3.0 suitable for operation on 230 V ± 10%, 50 Hz, single phase AC supply, complete as required.

The unit shall have automatic force shut down provision in case of fire on receiving signal from

BMS System. The cooling capacity of indoor unit will be at air inlet conditions of 27 Degree C DB

and 19 Degree C WB temperature.

Lifting, Shifting, Supply, Installation, Testing & Commissioning of Interconnecting "Y" & "T" Joints

i.e. Refnet Joints/ Header with Insulation for refrigearnt piping

Digitally signed by AMIT

Refrigerant Piping

Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of

following nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system,

complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing

including accessories, insulated with XPLE Class-O tubular insulation/with Class-O closed cell

elastometric nitrile rubber tubular sleeves sections of specified thickness as given below for

Suction and Liquid lines, all accessories as per specifications etc. as required :

5.1 5.1 6.4 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 30 245.00 7350.00

5.2 5.2 9.5 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 60 331.00 19860.00

5.3 5.3 12.7 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 30 466.00 13980.00

5.4 5.4 15.86 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 60 588.00 35280.00

5.5 5.5 19 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 20 707.00 14140.00

5.6 5.6 22.2 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 20 865.00 17300.00

5.7 5.7 25.4 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 5 1022.00 5110.00

5.8 5.8 28.58 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 5 1108.00 5540.00

5.9 5.9 31.8 mm dia (OD) (Hard drawn) with tube thickness 1.62 mm with 19 mm thick insulation m 1 1170 1170

6 5.10 34.9 mm dia (OD) (Hard drawn) with tube thickness 1.62 mm with 19 mm thick insulation m 1 1230 1230

6.1 5.11 38.1 mm dia (OD) (Hard drawn) with tube thickness 1.62 mm with 19 mm thick insulation m 1 1265 1265

6.2 5.12 41.27 mm dia (OD) (Hard drawn) with tube thickness 1.62 mm with 19 mm thick insulation m 1 1309 1309

6 1.14 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC

insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit

Supply,installation,testing and commissioning of PVC drain water with necessary clamps,

fittings such as bends tees etc. and duly insulated.

40 mm dia (9 mm tick ins.) Rm 120 374.00 44880.00

Supply, Laying, Termination of ISI Certified 4 Core 1.0 sq.mm ATSC, FRLS ,PVC insulated,

Unarmored, Tinned Copper, twisted, shielded, PE insulated, VAV Communication Cable with

9 MR proper ferrules, lugs and other necessary accessories. The spec shall meet the system Rmt 90 280.00 25200.00

manufacturer specifications.

Total HVAC WORKS 607315.00 135641.00

Digitally signed by AMIT

SCHEDULE OF QUANTITIES: IT

TOTAL TOTAL AMOUNT

TOTAL TOTAL AMOUNT

S No Description UNIT QUANTITY RATE

A. UTP Components for Data DSR (INR) NON-DSR (INR)

Supply, Fixing & Laying of CAT 6A UTP cable 23 AWG solid copper conductors for

Connectivity of Hub room to End Point.High Speed Gigabit Ethernet U/UTP, 250

MHz, Class E, 23 AWG, Unshielded LSZH Cable, C6

Supply, Installation, Testing and Comissioning of I/O port for CAT6A cable

2 termination at Work Station end. Keystone Unshielded Outlet, 180DG C6 Nos. 59 256.00 15,104.00

Supply , Installtion , Testing and Comissioning of CAT6A patch cord 2 Mtr (7 feet)

3 for information outlet (I/O) to end user device connectivity.High Speed Gigabit Nos. 59 350.00 20,650.00

24AWG U/UTP Patch Cord, LSZH, C6

Supply , Installtion , Testing and Comissioning of CAT6A patch cord 1 Mtr (3 feet)

for information outlet (I/O) to Rack End Redantant device connectivity.High Speed

Gigabit 24AWG U/UTP Patch Cord, LSZH, C6

Supply , Installtion , Testing and Comissioning of 24 port Loaded Jack Panel for

5 CAT6A cable termination at rack end. Data Active Nos. 3 11,531.00 34,593.00

C. Backbone Component

6 SITC of Multimode Fiber Patch Cord Nos. 1 950.00 950.00

D. Network Rack and Other Accessories

7 SITC of 16U Rack Wall Mount Nos. 1 15,000.00 15,000.00

SITC of router with Aggregate Throughput (Default) 100mbps, Aggregate

Throughput (Performance License) 500Mbps, Total onboard WAN or LAN

10/100/1000 ports 2nos, RJ-45-based ports 4nos, SFP-based ports 2nos, NIM

8 slots 2nos, Default memory DDR3 ECC DRAM (data plane) 2gb, Maximum Nos. 1 150,000.00 150,000.00

memory DDR3 ECC DRAM (control/servic es plane) 16gb, Default flash memory

8gb, USB console port -type B mini (up to 115.2 kbps) 1nos

SITC of Access Switch with minimum of 24x 10/100/1000 Base-T ports, 4x 10 Gig

SFP+ ports for uplink ports(supporting Single mode & Multi mode 1G/10G (LX, LR,

9 SX & SR modules). Should have Non-blocking switch fabric, IPv6 Ready with RPS Nos. 2 250,000.00 500,000.00

1 years warranty support for Access Switches.

SITC of Hardware controller managed Indoor Wi-Fi Access Point with Adapter for

11 SITC of 1 Gig SR transceivers/equivalent LC connector MM Nos. 2 15,374.00 30,748.00

1 Digitally signed by AMIT

Schedule of Quantities: CCTV

S No Item Description UoM Total Qty Rate DSR Amount Non DSR Amount

SITC of 2MP, 1/2.8” CMOS image sensor, low illuminance, high image definition, Outputs 2MP (1920 ×

1080) @ 25/30 fps Built-in IR LED, max IR distance: 30 m, Intelligent detection: Intrusion,

tripwire,Abnormality detection: Motion detection, video tampering, no SD card, Supports max. 256 GB

Micro SD card, IP67, IK10 protection etc all complete.

SITC of 8 channel Smart H.265+/H.265/Smart H.264+/H.264/MJPEG decoding format. · Max. decoding

capability: 32 × 1080p@30 fps or 32 × 2MP@30 fps. · Max. 384 Mbps incoming/recording/outgoing

bandwidth. · Support AcuPick with Max. 16-Channel. · Support N+M cluster. · AI by recorder: 2-channel

face detection and recognition, 4-channel perimeter protection, and 8-channel SMD Plus. · AI by

camera: Face detection and recognition, perimeter protection, SMD Plus, metadata, ANPR, stereo

analysis, heat map, and people counting etc all complete.

3 SITC of Hard Disk 4TB required for the above NVR etc all complete. No's 1 13,927.50 13,927.50

SITC of Network Wiring for Cameras/devices with CAT 6 cable from NVR in existing exposed /

4 recessed 25 mm dia Conduit including termination and providing/fixing 1.2 mm thick GI box with grid Box 1 7,990.00 7,990.00

plates with earthing complete in all respect.

5 8 Port Patch Panel with 24 Nos CAT6 Information Outlets in existing Network Rack No's 1 6,600.00 6,600.00

6 CAT6 Patch Chord in existing Network Rack No's 2 5,800.00 11,600.00

7 CAT6 IO / Connector at camera location No's 2 5,000.00 10,000.00

IP CCTV and Suvilliance Solution 83,422.50

Digitally signed by AMIT

SCHEDULE OF QUANTITIES - LIGHTING WORKS

S NO DSR/MR Description Unit QTY Rate DSR AMOUNT NON DSR AMOUNT

Supply, Installation, Testing and Commissioing of LED Pendant luminaire with

LED(Light Emitting Diode) system power: 28W, 120 LM/W system efficacy, colour

temperature of 4000K, neutral white, 230V constant current driver, 70% of

luminous flux after 50,000 operating hours, energy efficient LEDs, CRI>80,

luminous flux of 3360 lm, MacAdam 3, T.H.D≤10%, driver efficiency ≥ 88%, surge

protection of 2.5kV, direct light emission, Aluminium body, polyester white powder

coat applied over a 5-stage pre-treatment, Prismatic diffuser for glare-free

uniform light, UGR<19, Electronic control gear

Protection class I, IP40, L =1195mm, B = 295mm, H = 67mm, PH = 1500mm

Supply, Installation, Testing and Commissioing of Recessed downlightwith HPE

(High-Performance Efficiency) with LED (Light Emitting Diode), system power: 12

W, Luminous flux of luminaire 1320 lm, 110 LM/W system efficacy, Colour

temperature of 4000 K, Neutral white, CRI > 80, 230V constant current driver,

70% of luminous flux after 50,000 operating hours; energy-efficient LEDs, direct

2 MR light emission, housing in die-cast aluminium, Polyester powder white coloured no 8 1394.00 11152.00

coat applied over a 5-stage pre-treatment trim, prismatic diffuser for homogenous

light distribution, ZHLS (ZERO HALOGEN LOW SMOKE) wiring, Electronic

Protection class II, IP 40, Ø = 175 mm, DA(Ø) = 160 mm, H = 59 mm

Supply, Installation, Testing and Commissioing of Pendant/Recessed luminaire

with LED (Light Emitting Diode), system power 28 W, luminous flux of luminaire

3080 lm, 110 LM/W system efficacy, direct light emission CRI>80, colour

temperature of 4000K, Neutral white, 230V constant current driver, 70% of

luminous flux after 50,000 operating hours, energy efficient LEDs, luminaire profile

in aluminium, Plastic moulded end caps, Polyester powder Aluminium white

3 MR coloured coat applied over a 5- stage pre-treatment, high efficiency glare-free no 4 4001.00 16004.00

snap fit micro-prismatic diffuser for homogeneous light distribution, ZHLS (Zero

Halogen Low Smoke) internal wiring, integral Electronic control gear, adjustable

suspender, including cost of all connectors to create continuous cascading effect.

Protection class I, IP 20, L = 1199 mm, B = 75 mm, H = 90 mm, PL max = 1500

Supply, Installation, Testing and Commissioing of Pendant/Recessed luminaire

with LED (Light Emitting Diode), system power 14 W, luminous flux of luminaire

1500 lm, 110 LM/W system efficacy, direct light emission CRI>80, colour

temperature of 4000K, Neutral white, 230V constant current driver, 70% of

luminous flux after 50,000 operating hours, energy efficient LEDs, luminaire profile

in aluminium, Plastic moulded end caps, Polyester powder Aluminium white

4 MR coloured coat applied over a 5- stage pre-treatment, high efficiency glare-free no 2 2800.00 5600.00

snap fit micro-prismatic diffuser for homogeneous light distribution, ZHLS (Zero

Halogen Low Smoke) internal wiring, integral Electronic control gear, adjustable

suspender, including cost of all connectors to create continuous cascading effect.

Protection class I, IP 20, L = 599 mm, B = 75 mm, H = 90 mm,

1 Digitally signed by AMIT

Supply, Installation, Testing and Commisioning of Recessed downlight with LED

(Light Emitting Diode) system power: 5W, Luminous flux of luminaire 400 lm,

Colour temperature of 4000 K, Warm white, CRI > 80, 230V constant current

driver, 70% of luminous flux after 50,000 operating hours; energy-efficient LED,

direct light emission, housing in die-cast aluminium, Polyester powder white

coloured coat applied over a 5-stage pre-treatment ceiling trim, with reflector,

beam angle of 24°, Electronic control gear,

Protection class II, IP 20,

Supply, Installation, Testing and Commisioning of Recessed with trim luminaire

with Pinspot light with LED(Light Emitting Diode) system power: 8W, luminous

flux of luminaire 640lm, colour temperature of 4000K, CRI > 90,

SDCM<3, THD<10%, 230V constant current driver, 70% of

luminous flux after 50,000 operating hours, direct light emission, no 2 2400.00 4800.00

aluminium housing with trim, polyester Black powder coat applied

over a 5 stage pre-treatment on trim, with lens and a beam angle

of 36° and external Electronic control gear

Protection class II, IP20

SITC of Strip Light LED 5W per meter

2 Digitally signed by AMIT

SCHEDULE OF QUANTITIES - FIRE ALARM

DSR NO DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT TOTAL AMOUNT

DSR NO DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT TOTAL AMOUNT

2022 DSR (INR) NON-DSR (INR)

Supplying, installation, testing & commissioning of intelligent analog addressable photothermal

1 17.2.4 detector complete with mounting base complete as required. No 8 2858.00 22864.00

Supplying, installation, testing & commissioning of response indicator on surface/recessed MS

2 17.2.5 Box having two LED, metallic cover complete with all connections etc as required. No 8 276.00 2208.00

Supplying, installation, testing & commissioning of fault isolator complete with base as required.

Supplying, installation, testing & commisssioning of intelligent addressable programmable

5 17.2.6 sounder complete as required. No 1 2651.00 2651.00

Supplying, installation, testing & commissioning of addressable manual call point complete as

Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed

7 17.5.2 copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as Mtr. 80 173.00 13840.00

Supplying & Fixing of battery operated illiminated "EXIT" signage, with 2hrs power Battery backup

complete as required.

TOTAL FIRE ALARM & PA WORKS 48704.00 3870.00

Digitally signed by AMIT

SCHEDULE OF QUANTITIES: FIRE PIPING, HYDRANTS, SPRINKLERS AND ACCESSORIES

S No DSR 2022/ DESCRIPTION QTY UNIT RATE TOTAL TOTAL AMOUNT

S No DSR 2022/ DESCRIPTION QTY UNIT RATE TOTAL TOTAL AMOUNT

DSR (INR) NON-DSR (INR)

Providing, laying, testing & commissioning of 'C' class

heavy duty MS pipe conforming to IS 3589/IS 1239

including Welding, fittings like elbows, tees, flanges, tapers,

18.7 nuts bolts, gaskets etc. and fixing the pipe on the

1 wall/ceiling with suitable clamp/support frame and painting

with two or more coats of synthetic enamel paint of

required shade complete as required :

Providing, fixing, testing & commissioning of 15mm dia

18.21 quartzoid bulb type sprinklers of rating 68 degree

centigrade with required accessories :

18.21.1 Pendant type 18 Each 522.00 9396.00

Supplying, installation, testing & commissioning of sprinkler

flexible pipe (UL Listed) of stainless steel complete with 15

NPT on reducer thread with maximum working pressure of

175 PSI test pressure of 875 PSI (Burst) with branch line

3 18.25 (Inlet) 25mm NPT male thread to sprinkler head (Outlet)

15mm NPT female thread with reducer, nipple, 2 side

brackets, center bracket, stockbar of following sizes

complete as required.

Providing and fixing ISI Marked of approved make Fire

4 MR Extinguishers complete with all accessories as per

manufacturer's specifications.

a) CO2 gas nozzle type - 9 Litre capacity (IS:15683). 1 NOS 12912.00 12912.00

Mechanical Foam gas cartridge type. 9 Kg capacity

Digitally signed by AMIT

ABC dry powder stored pressure type 6 kg capacity

Digitally signed by AMIT

Schedule of Quantities: EPABX

S No Item Description UoM Qty Rate DSR Amount Non DSR Amount

SITC of EPABX Intercom with 4 incoming lines and 32 Anolog Extensions complete in all

2 SITC of Analog Phones No's 27 1,500.00 40,500.00

TOTAL 75,500.00

Digitally signed by AMIT

Schedule of Quantities: AV System

S No Item Description UoM Qty Rate DSR Amount Non DSR Amount

SITC of Cable Cubby with flip top, cover and 6 Pass Through Holes for multi-format cables, 2

1 Universal Power Socket , 1 HDMI, 1 USB-C for Data Transfer, made of aluminium No's 1 26,850.00 26,850.00

etc all complete etc all complete

SITC of 2m/6.5ft HDMI 2.0 Cable, 18Gbps 4K60Hz, Dolby Vision & HDR, ARC,CEC, ALLM, VRR,

2 | CL3 & VW-1 Rated etc all complete No's 1 3,175.00 3,175.00

SITC of10m HDMI 2.0 AOC | 24Gbps | 4K60Hz | Dolby Vision & HDR | ARC, CEC, ALLM & VRR

3 | ISF Certified | FT4, CL4 etc all complete No's 1 13,750.00 13,750.00

SITC of 2m/6.5ft USB-C to C Cable | SuperSpeed USB 20Gbps | 4K60 Alt-Mode | 100w PD etc

4 all complete No's 1 4,255.00 4,255.00

5 SITC of Various Cables & Connectors etc all complete No's 1 11,950.00 11,950.00

Total 59,980.00

Digitally signed by AMIT

SCHEDULE OF QUANTITIES-ART WORKS

S NO MR DESCRIPTION UNIT QUANTITY RATE

DSR (INR) NON DSR (INR)

Providing and fixing theme artwork/ any other as per direction and

site requirement from the local artisans as per the selection of the

client and the architect.

Panels of various sizes No. 5 3000.00 15000.00

TOTAL ART WORKS 0.00 15000.00

Digitally signed by AMIT

Schedule of Quantities: Signages

S No Description Unit Qty Unit price

1 RECEPTION 3D ACRYLIC SIGNAGE

Providing, fabricating and fixing of 3D Acrylic Letters raised 1.5 inches of required

size and shape with arrangement of screws in the letters itself for mounting on the

walls or pasting using Tape. Fixing complete as per directions of the engineer. The

sizes would be calculated in Sqft as per Logo Design provided.

Tentative Size 42"x60"

2 NAME SIGNAGE CHANGEABLE (All Floors)

Providing and fixing of Acrylic signage made of 3mm Acrylic with textured wood

finish pasted /White milky acrylic 3mm laser cut pasted on top with proper names/

Departments written using plottercut vinyl or laser cut acrylic letters in approved

colour.Inserting provision for changing names .Fixing provision using double sided

tape as required.

Signage Size 12"x5"

TOTAL 29467.00

Digitally signed by AMIT

SCHEDULE OF QUANTITIES: FURNITURE

S NO DESCRIPTION/ SPECIFICATIONS QTY UNIT UNIT PRICE AMOUNT

LINEAR WORKSTATIONS

SIZE - 1200W X 600D X 750HT AND 300HT SCREEN

Table Top: 25mm thick Pre laminate particle board with 2mm PVC

edge lipping on all exposed edges

End Legs: MS powder coated legs

Intermediate Legs: MS podwer coated 60X40mm legs and supporting

MS cross beams (40X20mm)

Main screen - Al 30screen with Fabric magnetic and glass marker tile

Privacy screen -6mm thick acrylic on detachable studs

Modesty- 12mm PLB modesty on passage side

Wire Management

250mm Ht Racway with 65mm Dia Wire Manager Grommet

Vertical Raceway with built in separator for power and data of size 250H X 70mm thick with provision to mount swicthes and

sockets on laminate facia with Vertical Wire Entry cover for wire uptake from floor to raceway with 65mm Dia Wire Manager Grommet.

MAIN TABLE: 1650W X 750D X 750HT TABLE TOP

SIDE COMP STORAGE 2D1F: 900 X 450 X 750HT

BACK STORAGE - 2100W X 450D X 750HT

Specifications:

Table top: Made of 25mm thick prelaminated particle board of approved shade confirming to E1 norms. All the edges of cabin table surface

shall be provided with machine pressed 2mm thick imported PVC lipping glued with hotmelt Eva glue free from any VOC.

Modesty Panel: 18mm thick 450mm ht plt modesty panel is considered.Wich is machine pressed 2mm thick imported PVC lipping glued with

2 hotmelt Eva glue free from any VOC. 2 NOS 73,750 ₹ 147,500.00

Under Structure Support: Table top is supported on MS Powder coated Collaborate Loop Legs constructed by using Specially tooled &

specifically designed Diamond shape 50x25x1.6thk ERW Tube – 16g, strong Leg bush & levelers made of Acrylonitrile butadiene styrene

(ABS), a very tough material.Legs are connected using ms cross beams made of 40 x 20 16 gauge rectangular tube.

Wire Management: 350mm Anodised flip up Made of Aluminum in anodised finish, which has soft closure and three way wire acess & PVC

cable dump. Vertebra for wire entry.

Side Composite Storage 2D1F: Storage is made of 25mm thick top, 18mm thick prelaminated particle board of approved shade confirming

to E1 norms. All the edges of stoarge surface shall be provided with machine pressed 2mm thick imported PVC lipping glued with hotmelt

Eva glue free from any VOC. with openable shutters, adjustable shelves, auto closing hinges, locking mechanism, finger groove handles and

2D+1F Drawer unit with Regular locking system.

MOBILE PEDESTAL 2D+1F

Specifications:

Top & Sides : 18mm Thk pre laminated particle board

Back : 9mm Thk pre laminated particle board

Edge : All exposed area with 2mm thick PVC edge lipping

Handle : Finger groove handle

Lock : Regular lock

Digitally signed by AMIT

S NO DESCRIPTION/ SPECIFICATIONS QTY UNIT UNIT PRICE AMOUNT

CONFERENCE TABLE

SIZE - 3600W X 1500D X 750HT

Specifications:

Table Top: 40mm thick pre laminated particle board with matching PVC edge

Support: 25mm thick pe laminated particle board with matching PVC edge lipping

4 Modesty Panel: 1200 x 450HT- 18mm thick pre laminated particle board modesty 1 NOS 116,230 ₹ 116,230.00

panel of 450mm Ht.

Wire Management: 2 no of 450mm aluminium flip up, provision to mount switches

and sockets on PVC cable dump and Vertical wire entry cover for wire uptake from

floor to cable dump

HB CHAIR FOR CABINS

Supply and Placing in position of High Back Chairs of approved make. The seat shall be made up of 1.2+/-0.1cm thick hot pressed plywood

and upholstered with synthetic leather and moulded polyurethane foam. The back shall be made up 1.2+/-0.1cm thick hot pressed plywood

upholstered with replaceable synthetic leather upholstery covers and moulded polyurethane foam. The back ply and foam is designed with

contoured lumbar support for comfortable seating posture. The moulded polyurethane foam shall be of density 45+/-2kg/m ³, and hardness

load 16+/-2kgf as per IS:7888 for 25% compression. The dimensions of seat shall be- 51.0cm(W) x 48.0cm(D) and of back shall be

48.0cm(W) x 76.0cm(H). The armrest top shall be made of moulded polyurethane and mounted on to a drop lift height adjustable type M.S

tubular armrest support chrome plated. The armrest height shall be adjustable up to 6.5+/-0.5cm in 4 steps. The mechanism of the chair shall

have following features: 360⁰ revolving type, Knee tilt synchro mechanism, Tilt tension adjustment, Single point control, 4 position locking with

anti shock feature, seat back tilting ratio 1:2, Chair should have seat sliding mechanism. The backrest shall consists of a sliding up down

mechanism, Which can be adjusted in the range of 7.0+/-0.5cm and should be locked in 4 positions for correct position of lumber support.

The chair shall be provided with pneumatic height adjustment which shall have stroke of 10.0 +/- 0.3 cm. The pedestal shall be fabricated

from 0.2+/-0.02cm thick HR sheet, chrome plated and assembled with injection moulded black polypropylene hub cap. The size of the

pedestal shall be 66.0+/- 0.5 cm pitch-centredia (76.0 +/- 1.0 cm with castors). The twin wheel castors shall be made black nylon. Overall

dimensions of Chair shall be, Width of Chair - 76.0cm, Depth of Chair - 70.7cm as measured from pedestal below. Height from ground - min

103.5 to max 120.5cm. Seat height - min 47.5 to max 57.5cm. All the dimensions will be as per the Original Manufacturer's Specifications.

The product should be certified with BIFMA, Greenguard, ISO 9001:2015 and ISO 14001:2015 complete as per approved sample and as per

the direction of Engineer-In-charge.

VISITOR CHAIR FOR CABINS

Supply and Placing in position of Visitor Chairs of approved make. The seat is cushioned seat made of injection molded plastic outer & inner.

Plastic inner is upholstered with leatherette and molded high resilience polyurethane foam of density 45±2 kg/m³, & hardness load of 16±2 kgf

as per IS:7888 for 25% compression. Seat Size is 47.0 W cm x 48.0 D cm. The back is cushioned made of PU foam with insitu molded M.S.

ERW round tube of size 1.9±0.03cm x 0.16±0.0128cm, upholstered with leatherette. The back size is 47.7 W cm x 60.1 D cm. The tubular

frame is cantilever type and made of Ø2.54±0.03cm x 0.2±0.016 cm thick SS 202 tube. The back connected to frame through chrome plated

high pressure die casted connector pipe. All the dimensions will be as per the Original Manufacturer's Specifications. The product should be

6 of BIFMA compliance, ISO 9001:2015 and ISO 14001:2015 complete as per approved sample and as per the direction of EngineerIn-charge. 4 NOS 14,910 ₹ 59,640.00

Digitally signed by AMIT

S NO DESCRIPTION/ SPECIFICATIONS QTY UNIT UNIT PRICE AMOUNT

CHAIR FOR WORKSTATIONS

Seat and back is made out of 12mm molded hot pressed plywood in ergonomic shape fitted with Imported T-nuts and revited in to the

wood.Gaslift - Class 4 tested -ANSI BIFMA performance standards.Castors - Twin Castors 50mm dia castors compling to ANSI / BIFMA X

5.1 – 2002.The 640mm dia (26 inches) five pronged base is made out of GF nylon – Reinforced with bottom ribbing for additional buttress

and strength. Tested prudently and rigorously as per ANSI/BIFMA X5.1-2011 General Purpose Office Chair Standards.Upholstery: Cushion

with pre moulded foam of 50 - 60 density in the shape of plywood. Density -- 52 kg/m3 Hardness -- 12.6kgf at 25%.Self Calibrating Multilock

Mechansim Tested as per BIFMA Standards.Back Frame is upholstered with Thinner Mesh Adjustable Lumbar Support Allows you to adjust

the lumbar support position for good back support and blood circulation.Moulded self skinned polyurethene Arms confirming to IS 7078 with

7 steel insets for long life. one way adjustable - Height Adjustable.Chair should have Adjustable Headrest.Tension control is below the 24 NOS 10,801 ₹ 259,221.60

Seat.Seat are duly upholstered with approved fabric.

FOR MEETING ROOMS

Chair's Seat and back is made out of 12mm molded hot pressed plywood in ergonomic shape fitted with Imported T-nuts and revited in to the

wood.Gaslift - Class 4 tested -ANSI BIFMA performance standards.Castors - Twin Castors 50mm dia castors compling to ANSI / BIFMA X

5.1 – 2002.The 640mm dia (26 inches) five pronged base is made out of GF nylon – Reinforced with bottom ribbing for additional buttress

and strength.Tested prudently and rigorously as per ANSI/BIFMA X5.1-2011 General Purpose Office Chair Standards.Upholstery: Seat

Cushion with pre moulded foam of 50 - 60 density Density -- 52 kg/m3 Hardness -- 12.6kgf at 25%.Distinctively and characteristically

designed tilt mechanism offering a very smooth and fluidic reclining motion with tension adjust knob and importantly offering seat to back

recline ratio of 3:7, optimal for good back support.Multilock mechanism is fabricated from CR Sheets, undergo through CO2 welding process

8 imparting uniform surface finish and tensile strength. The components are processed with high degree of precision and care so as to 11 NOS 9,261 ₹ 101,871.00

assemble with other parts in perfect harmony to give smooth and effortless reclining experience. Tension springs are made out Grade II

material conforming to Indian Standards. Also provided with release levers for locking mechanism and height adjustment of seat. Mechanism

aides to operate the height adjustment, and has been equipped with 4 locking positions, back rest “ Return Prevention” function. Back Frame

is inserted with Mesh & Adjustable Lumbar Support.Tension control is below the Seat.Moulded polyurethene Arms confirming to IS 7078 with

steel inserts for long Moulded self skinned polyurethene Arms confirming to IS 7078 with steel insets for long life. one way adjustable - Height

Adjustable.Seat is duly upholstered with approved fabric.Chair Should be BIFA Certified.Seat: Depth- 51.5 cm Width- 44.5 cm

Width- 51.5 cm Depth- 53.5 cm Minimum Height- 99.5 cm Maximum Height- 108.5 cm Minimum Seat Height- 44.5 cm

Maximum Seat Height- 52.5 cm Width (Arm to Arm)- 66 cm Arm Rest Height- 18- 27.5 cm

SPECIFICATION:-

The storage will be made in 18 MM PLB (Pre laminated board) with the density of 680kg/m³ and 18 mm thick one side pre-laminate board

confirming to IS 12406 : 2013. Surface: CPL ( continuous pressure laminate) in 0.5mm thickness in melamine finish. The PLB will be

confirming to E-1 Grade as per the JIS A 5905-2003 standards and approved shade confirming to IS-12823:1990.The back of storage will be

made in 9 MM PLB (Pre laminated board) with the density of 680kg/m³ and 18 mm thick one side pre-laminate board confirming to IS 12406 :

9 2013. Surface: CPL ( continuous pressure laminate) in 0.5mm thickness in melamine finish. Storgage will be provided with edge banding 2

mm thick PVC edge band will confirm to DIN 68861 for resistance to clearers. The Hot melt glue used for fixing the PVC edge band should

have ISO 9001- 2015 quality certification and confirm to ASTM D 4499 standards for viscosity and thermal stability. The edge band material

should have Shore D hardness of 79± 4. storage will have two adjustable shelves making 3 compartments.The shutters are fitted with auto

closing hinges.Central locking system , levellers & other necessary hardware are priovided.Handles will be hand grooved.

MEDIUM HT STORAGE

SIZE:-900W X 450D X 1200HT

Digitally signed by AMIT TOTAL ₹ 1,446,319.20

SCHEDULE OF QUANTITIES: HORTICULTURE

S NO DESCRIPTION Qty Unit Rate DSR AMOUNT NON DSR AMOUNT

Supply and Planting Lolina plant having 2-3 ft height with Coco-

peat, mud and manure complete.

Supply and Planting Seaforthia Palm having ht. 90cm to 1.20 m with

2 6-8 suckers, well developed, fresh and healthy lush green leaves 3 Each 1500.00 4500.00

from bottom to top complete.

Supply and Planting Rhapis Palm having ht. 90cm to 1.20 m with 15

3 to 18 equal suckers, well developed, full of fresh and healthy leaves 3 Each 1500.00 4500.00

from bottom to top complete.

Supply of full soil fill conical shaped planters of specified volume

and dimensions in stone finish or equivalent. planters to be

indigenously made by rotational moulding, with homogeneous

recyclable, industrial grade polymer-resin mix, and textured surface.

planters should have an integrated water outlet hole & plug, single

4 layered peel-proof construction, light weight, rust proof, uv

stabilized, anti-frost feature without any joints, and easy to clean.

planter supplier must give 1 year warranty against any fading or

cracking for both indoor and outdoor use. green plant and laying is

extra. potting instructions as per company catalogue.

6.1 Supply and installation of Natural Plants with sand, fertilizer etc. 15 LS 500.00 7,500.00

Digitally signed by AMIT

Interior fit out works in the office space of AICL, Lucknow

S NO DESCRIPTION AMOUNT AMOUNT

3.00 ELECTRICAL WORKS 1,765,196.00 1,475,490.14

5.00 WI-FI & LAN WORKS (ACTIVE & PASSIVE) 0.00 1,619,365.00

8.00 FIRE ALARM & PA SYSTEM 171,636.00 11,610.00

Total (DSR +MR) 16,791,071.00

Digitally signed by AMIT

SCHEDULE OF QUANTITIES-CIVIL

S NO DSR/ MR DESCRIPTION UNIT QUANTITY RATE

DSR ITEM NON DSR ITEM

1 FLOORING WORKS

CEMENT CONCRETE : Providing and laying in position CEMENT CONCRETE of specified grade exluding the cost of centring and

shuttering-all work upto plinth level.

1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

VITRIFIED TILES : Providing and laying vitrified floor and wall tiles in different sizes (thickness to be specified by the manufacturer) with

water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick

11.41A cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white

1.02 cement and matching pigments etc., complete. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be

done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and

Size of Tile 600x1200 mm

VITRIFIED TILES : Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water

absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12

1.03 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the

joint with white cement & matching pigments etc. complete.

ALUMINIUM SKIRTING: Supply of 100mm Aluminium (Grade 6063) Skirting with 15 micron anodising In Natural Finish. Thickness

1.30 to 1.50mm. Designed to conceal screws. Seamless finish. Complete with Rubber/ PVC Jointers and Gasket.

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement,

1.05 including cement slurry, but excluding the cost of nosing of steps etc. complete.

11.3.1 40 mm thick with 20 mm nominal size stone aggregate SQM 58.00 614.20 35,623.60

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity

counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base

8.2 cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups,

1.06 including rubbing, curing, edge moulding and polishing of edges to give high gloss finish etc. complete at all levels.

8.2.2 Granite stone slab of colour black, Cherry/Ruby red

Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location

1.07 8.5 in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. EACH 2.00 978.70 1,957.40

Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal

8.10 partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with

1.08 cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-

charge and finished smooth.

8.10.2 Granite Stone of approved shade SQM 1.00 4,051.85 4,051.85

TOTAL FLOORING WORKS 1,054,181.45 15,080.00

2 FALSE CEILING WORKS

Digitally signed by AMIT

S NO DSR/ MR DESCRIPTION UNIT QUANTITY RATE

DSR ITEM NON DSR ITEM

GYPSUM BOARD CEILING : Providing and fixing false ceiling at all height including providing and fixing of frame work made of special

sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and

consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one

flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle

hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate

G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom

wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction

perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction,

2.01 12.45 including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to

wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of

gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including

jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes ,

finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all

as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with

frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but

excluding the cost of painting with

12.45.1 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks) SQM 285.00 1,355.80 386,403.00

ACOUSTIC CEILING: Providing and fixing suspended Demountable acoustic ceiling in recessed grid system 300 x 1200 x12.5mm E

with Unity 3,square 3.5mm holes, with 0.80 NRC* Material: High Grade Glassfiber Reinforced Perforated plasterboard with Cleaneo

2.02 MR Technology Board type: Ceiling tile Length x width x thickness: 300x1200x12.5mm Edge: E recessed grid system (8mm recess) SQM 163.00 3,000.00 489,000.00

Perforation: Unity 3, 3.5x3.5 Surface: Water-based acrylic paint ,Colour: White NCS 0701 Y24R, closet match to RAL 9003; gloss 5

TOTAL FALSE CEILING WORKS 386,403.00 489,000.00

3 WALL FINISHES WORKS

GLASS PARTITION (FIXED GLASS PARTITION WITH 10MM GLASS): Providing & Fixing of Modular Single glazed partitioning frame

make 45mm System, Using KL 45 001 (45mm x 25mm) as wall starter section, Using KL 45 001 & KL 45 002 (45mm x25mm) as Top

3.01 MR & bottom channel. Toughened Glass of thickness 10mm to be installed with required accessories ie glass to glass aluminium I SQM 7.00 4,400.00 30,800.00

sections, T section & 90 degree sections as per the requirement & Glass packing to adjust the floor level. Insertion of

silicon/Thermoplastic gasket to adhere the glass firm & airtight. Partition Height Considered is 2500mm

FRAMELESS HINGED GLASS DOOR: Providing & Fixing of Modular Aluminium single leaf Stile door frame of make 45 mm System

duly Anodized Aluminium Sections using KL 45 001 & KL 45 003 (45mm x 45mm) and Stile door of size 60x35mm as door frame with

3.02 MR Toughened Glass of Thickness 10 mm. Hardware as per make list and Lever Handle with Mortise Lock, Exposed Door Closer, Set of 4

Hinges, Door Stopper and required accessories ,Silicone/Thermoplastic Gaskets & Screw Caps.

WOODEN DOOR FRAMES : Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed

9.1 and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for

9.1.1 Second class teak wood CUM 1.00 142,949.70 142,949.70

FLUSH DOOR SHUTTERS : Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type,

9.21 core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or

cross bands and face veneers on both faces of shutters:

9.21.1 35mm thick including ISI marked Stainless Steel butt hinges with necessary screws SQM 10.00 2,392.65 23,926.50

WOODEN LIPPING : Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door

shutters (over all area of door shutter to be measured).

Providing and Fixing 22x922 mm D-type Handle Material : Stainless Steel. Finish : Satin Stainless Steel (SSS). of approved make and

model all complete as per the direction of Engineer-in-charge.

Digitally signed by AMIT

S NO DSR/ MR DESCRIPTION UNIT QUANTITY RATE

DSR ITEM NON DSR ITEM

Providing and Fixing SS Mortise Lock Body SB/TB for door thickness 25-50 mm for of approved make and model all complete as per

the direction of Engineer-in-charge.

Providing and Fixing Double cylinder Floor Spring- with Closing Force EN 3 with Maximum door weight 105 Kg. Maximum door width

950mm.Closing speed : 130°

3.08 MR Final closing speed : 15-0°. Hold Open (standard): 90° hold open. Weight of floor spring approx : 6kg, 5,00,000 cycles Tested with 5 Each 7.00 7,850.00 54,950.00

Years Warranty against manufacturing defect. CE certified for wooden doors all complete as per the direction of Engineer-in-charge.

Providing 40x5mm flat iron hold fast 400mm long including fixing to frame with 10mm diameter bolts, nuts and wooden plugs and

3.09 9.53 embedding in cement concrete block 300x100x150 mm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm EACH 40.00 228.85 9,154.00

GLASS FILMS: Providing & Fixing Frosted Translucent, cast PVC, self-adhesive vinyl, special CRYSTAL-effect film to reproduce Sand-

blasting effect on glass with customised designs, thickness of 2 mil (0.05mm) without adhesive & 3mil (0.8)with adhesive having

minimum tensile strength of 3.5 pound/inch at 73 F(0.6 kg/cm at 23 C). Adhesion after 24hrs of installation should be 4 pounds/inch

3.10 MR (0.7 kg/cm) on Acrylic, Glass Polycarbonate: MCS warranty of 3yrs (if exposed to direct sunlight) to 15yrs (indoors). Contractors SQM 55.00 1,200.00 66,000.00

payment wouldn't be released until & unless he/she produces orginal warranty certificate from the manufacturer.

ACOUSTIC PANELLING: PET Panels made of Polyester in size 2440x1220 mm with thicknesses of 9mm. Density is 1650 gsm for

9mm. The panel can plain/printed/ embossed/ customized to form different patterns. Panels can be cut to customize shape and size to

make different patterns. The acoustic panels should have an NRC of up to 0.3-0.6 Bollard PET Panels should be made of recycled

material and should be 100% recyclable. The panels need to be installed as per approved pattern and color on a plain wall. The panel

needs to be glued or nailed with headless nails. Thickness: 9 Sheet Size: 2440mm x 1220mm Tolerance: +/- 5% Density: 1650 gsm

Fire Resistance: EN13501 – Class B s1, d0(SGS) NRC: 0.3 – 0.6mm, depending on the air gap between the wall and the panel

Shades: 36 shades available Material: 100% Polyester

LACQUERED GLASS: Providing and fixing of 6 mm thick premium GRIHA rated Lacquered glass of approved color by Client /

Engineer in charge, fixed with compatible neutral grade silicon on a perfectly levelled 12mm thick water proof marine plywood / MDF /

Mineral fibre board which is mounted on RCC wall/any other structure. Lacquered glass must be made industrially (using curtain

coating process); opaque (if viewed against a support wall), uniformly coated with PU lacquer (50 micron thick coating or more); panel

to panel colour consistency (measured by photo spectrometer); highly durable (passes hardness test for minimum 220 oscillations);

humidity resistance (conforms to BS EN 1036 1999 or equivalent) ; environmentally friendly having Low VOC (no lead, no arsenic,

no copper, no formaldehyde), low VOC content <100g/l. Silicone used should not react with lacquer coating (compatible neutral cure

ACRYLIC SOLID SURFACE CLADDING : Providing & fixing of straight Paneling for walls & Columns structures anchored in floor slab

& celling, cladded with Acrylic Solid Surface 6mm thick sheets straight fabricated on a single face, finished in matte finish, pasted with

industrial grade silicon on a robust substrate. Substrate shall be with suitable MS box sections [Appx. 15 to 20 kg/ Sqm] as per

3.13 MR structural requirement & duly painted with anti-rust red oxide coating and covered with 12 mm thick water proof ply as per the design SQM 20.00 9,210.00 184,200.00

and dimensions approved. The proposal includes the cost of preparing appropriate substrate surface over the civil structure provided,

along with material cost & installation / fixing on straight walls etc. FOR ALL WALL CLADDING, TABLE TOPS ETC. COMPLETE

Digitally signed by AMIT

S NO DSR/ MR DESCRIPTION UNIT QUANTITY RATE

DSR ITEM NON DSR ITEM

ROLLER BLINDS : Providing & supplying of Window Blinds as per the approved sample in required shade and style consisting, of

Roller Blinds comprising of optima screen Fabric comprising of 22% polyester, 78% PVC, Fabric weight 460-480G weight per sq m,

Thickness 0.67 mm, Yarn count 18-19/cm, having fire resistance standard – NFPA 701-89 small testing ISO-5659-2 .The tear

resistance should be complying to ISO4674 & breaking resistance – ISO 5081. The DRIVE UNIT shall be of clutch for quick,easy and

safe installation,moulded plastic with steel spring support and inserted into the tube end. It shall be driven by a ball chain pulley with ball

chain and can be positioned at right side or left hand side of the Shade. The Shade when lowering or raising, shall be automatically

locked in position upon release of the ball chain by means of a built in friction lock.Universal clutch for left and right hand

operation.Chain Gear Ratio of 1.75:1.The END PLUG shall be molded of plastic witha steel location pin. The plug shall be inserted into

3.14 MR the tube end. (Opposite to the Drive Unit) for ease of installation. TheSUPPORT BRACKETS shall be of coated steel & provided with SQM 99.00 1,871.00 185,229.00

covers and used in right hand or left hand positions differentiated by the acceptance of the of the rectangular drive unit support or the

round idler plug pin.Can beinstalled (a) On Face (b) Ceiling Mount (c) On Frame (d) in Recess. The Bracket should be protruding

outside maximum of80mm.The ROLLER TUBE shall be of extruded aluminum with 37mm internal diameter & skin thickness of 1mm

and shall incorporate a key way integral with the tube to accommodate the spline. The BOTTOM RAIL shall be a Flat Bottom made up

of powder coated steel. The BALLCHAIN shall be 2mm diameter cord with 4.5mm diameter acetal balls moulded co-axially to it on

6mm pitch to form an endless ballchain.It is used for raising or lowering action of the shades.hall be suitable for sill, face or side facing.

Cord Equalizer shall be injection melded from impact modified acrylic with a high flexural modulus

PELMET: Providing and fixing 18 mm thick, 150 mm wide pelmet of flat pressed three layer or graded plain wood particle board

medium density grade I, ISi marked and conforming to IS : 3087 marked, including top cover of 6 mm commercial ply wood conforming

3.15 9.42 to IS: 303 BWR grade, nickel plated M.S. pipe 20 mm dia ( heavy type) curtain rod with nickel plated brackets, including fixing with 25x3 RM 54.00 600.55 32,429.70

mm M.S. flat 10 cm long fixed to pelmet with hollock wood cleats of size 100 mm x 40 mm x 40 mm on both inner side of pelmet and

rawl plugs 75 mm long etc. all complete.

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up

3.16 to floor V level.

6.13.2 Cement mortar 1:4 (1 cement :4 coarse sand) Sqm 10.00 1,123.80 11,238.00

3.17 6.15 Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry. Sqm 10.00 104.80 1,048.00

13.4 12 mm cement plaster of mix :

3.19 13.26 Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth Sqm 565.00 262.70 148,425.50

Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004,

3.20 Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives

13.48A.1 New work (Two or more coats applied @ 1.43 litre/10 sqm) over and including priming coat of exterior primer applied @ 0.90 litre/10 SQM 978.00 181.25 177,262.50

PLY: Providing and fixing plain lining with necessary screws/ nuts & bolts/ nails, including a coat of approved primer on one face, and

3.21 fixed on wooden/ steel frame work, complete as per direction of Engineer-in-Charge

9.140.1 12mm thick commercial ply conforming to IS : 1328 BWR type SQM 455.00 1,224.65 557,215.75

4MM THICK MDF BOARD: Providing and fixing plain lining with necessary screws/ nuts & bolts/ nails, including a coat of approved

3.22 MR primer on one face, and fixed on wooden/ steel frame work, complete as per direction of Engineer-in-Charge

4mm thick MDF Board SQM 390.00 270.00 105,300.00

ALUMINIUM FRAME: Providing and fixing partition, frame work in 50x25x1.5mm Aluminium Section placed at 600mm centre to centre

3.23 MR both ways (horizontal & vertical) fastened to floor, ceiling and horizontal member. The item includes providing and fixing 50mm thick SQM 228.00 1,347.00 307,116.00

polyester synthetic insulation as insulation of 100 GSM.

LAMINATE: Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high

3.24 9.127.2 density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of SQM 409.00 897.30 366,995.70

adhesive of approved quality. 1MM THICK

Extra for providing vision panel not exceeding 0.1 sqm in all type of flush doors (cost of glass excluded) (overall area of door shutter to

3.26 be measured):

Digitally signed by AMIT

S NO DSR/ MR DESCRIPTION UNIT QUANTITY RATE

DSR ITEM NON DSR ITEM

9.24.1 Rectangular or square SQM 5.00 199.15 995.75

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc.

21.3 complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in

21.3.3 With float glass panes of 8 mm thickness (weight not less than 20 kg/sqm) SQM 1.00 1,685.40 1,685.40

Providing and fixing thermal insulation with Resin Bonded Fibre glass wool conforming to IS: 8183 having density 24 kg/m3, 50 mm

3.28 12.57 thick, wrapped in 200G Virgin Polythene Bags fixed to wall with screw, rawel plug & washers and held in position by criss crossing GI SQM 228.00 358.50 81,738.00

wire etc. complete as per directions of Engineer-in-Charge.

Providing and fixing carbon steel galvanised ( minimum coating 5 micron) dash fastener of 10 mm dia double threaded 6.8 grade (yield

10.27 strength 480 N/mm2), counter sunk head, comprising of 10 mm dia polyamide PA 6 grade sleeve, including drilling of hole in frame ,

3.29 concrete/ masonry, etc. as per direction of Engineer-in-charge.

TOTAL WALL FINISHING WORKS 1,805,156.55 1,681,808.00

4 MISCELLANEOUS WORKS

DISMANTLING: Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of

unserviceable surplus material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-Charge.

TOTAL MISCELLANEOUS WORKS 0.00 150,000.00

Digitally signed by AMIT

SCHEDULE OF QUANTITIES (SANITARY/ PLUMBING)

TOTAL AMOUNT TOTAL AMOUNT

TOTAL AMOUNT TOTAL AMOUNT

Item DSR 2023/

DESCRIPTION OF ITEM QTY UNIT RATE DSR (INR) NON-DSR (INR)

Providing and fixing white vitreous china extended wall mounting water closet

of size 780x370x690 mm of approved shape including providing & fixing white

vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/ 6 litre

1 17.78 (adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, 1 Each 14999.15 14999.15

bolts and gasket etc complete.

Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass

single hole basin mixer of approved quality and make, including painting of

2 17.7A fittings and brackets, cutting and making good the walls wherever required:

White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass

single hole basin mixer 1 Each 3960.55 3960.55

Providing and fixing white vitreous china battery based infrared sensor

operated urinal of approx. size 610 x 390 x 370 mm having pre &

post flushing with water (250 ml & 500 ml consumption), having

water inlet from back side, including fixing to wall with suitable

brackets all as per manufacturers specification and direction of

Engineer-in-charge.

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C.

5 17.28 waste fittings complete.

17.28.2 Flexible pipe

Providing and fixing 600 x 450 mm beveled edge mirror of superior glass (of

approved quality) complete with 6 mm thick hard board ground fixed to

wooden cleats with C.P. brass screws and washers complete.

8 17.34 Providing and fixing toilet paper holder

9 17.70 Providing and fixing PTMT Bottle Trap for Wash basin and sink.

17.70.2 Bottle trap 38 mm single piece moulded with height of 270 mm, effective

length of tail pipe 260 mm from the centre of the waste coupling, 77 mm

breadth with 25 mm minimum water seal, weighing not less than 263 gms 1 Each 375.65 375.65

Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200

mm wide with minimum distances of 37 mm from wall face with concealed

10 17.72 fittings arrangement of approved quality and colour, weighing not less than 88 1 Each 231.95 231.95

Providing and fixing C.P. brass bib cock of approved quality to conforming to

Digitally signed by AMIT

18.49.1 15 mm nominal bore 1 Each 506.80 506.80

Providing and fixing C.P. brass long body bib cock of approved quality

12 18.51 conforming to IS standards and weighing not less than 690 gms.

18.51.1 15 mm nominal bore 1 Each 798.95 798.95

Providing and fixing C.P. brass stop cock (concealed) of standard design and

13 18.52 of approved make conforming to IS : 8931.

18.52.1 15 mm nominal bore

Providing and fixing C.P. brass angle valve for basin mixer and gyser points

of approved quality conforming to IS : 8931

18.53.1 15 mm nominal bore 4 Each 574.30 2297.20

Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high

and 112 mm distance from wall of standard shape with bracket of the same

15 17.71 materials with snap fittings of approved quality and colour, weighing not less 1 Each 168.35 168.35

Cutting chases in brick masonry walls for following diameter sand cast

iron/centrifugally cast (spun) iron pipes and making good the same with

16 17.61 cement concrete 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate

12.5 mm nominal size) including necessary plaster and pointing in cement

mortar 1:4 (1 cement : 4 coarse sand) :

17 18.76 Cutting holes upto 30 X 30 cm in walls including making good the same.

18.76.1 With common burnt clay F.P.S. (non modular) bricks 1 Each 416.80 416.80

Making chases upto 7.5 X 7.5 cm in walls including making good and finishing

18 18.78 with matching surface after housing G.I. pipe etc. 1 M 202.90 202.90

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having

thermal stability for hot & cold water supply, including all CPVC plain & brass

threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This

19 18.7 includes jointing of pipes & fittings with one step CPVC solvent cement and

testing of joints complete as per direction of Engineer in Charge.

Internal work - Exposed on wall

18.7.2 20mm nominal outer dia pipes

18.7.3 25mm nominal outer dia pipes 2 M 401.44 802.88

18.7.4 32mm nominal outer dia pipes 2 M 518.75 1037.50

18.7.5 40mm nominal outer dia pipes 2 M 702.95 1405.90

18.7.6 50mm nominal outer dia pipes 2 M 934.15 1868.30

Digitally signed by AMIT

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having

thermal stability for hot & cold water supply, including all CPVC plain & brass

threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing.

20 18.8 This includes jointing of pipes & fittings with one step CPVC solvent cement

and the cost of cutting chases and making good the same including testing of

joints complete as per direction of Engineer in Charge.

Concealed work including cutting chases and making good the walls

18.8.1 15mm nominal outer dia pipes

18.8.2 20mm nominal outer dia pipes 5 M 537.60 2688.00

18.8.3 25mm nominal outer dia pipes 2 M 627.25 1254.50

18.8.4 32mm nominal outer dia pipes 2 M 739.30 1478.60

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having

thermal stability for hot & cold water supply, including all CPVC plain & brass

21 18.9 threaded fittings. This incudes jointing of pipes and fittings with one step

CPVC solvent, trenching, refilling, and testing of joints complete as per the

direction of the engineer incharge

18.9.6 50mm nominal outer dia pipes

Providing and fixing gun metal gate valve with C.I. wheel of approved quality

18.17.1 25 mm nominal bore 1 Each 622.40 622.40

18.17.1A 20 mm nominal bore 1 Each 539.95 539.95

24 18.21 Providing and fixing unplasticised PVC connection pipe with brass unions.

18.21.1 30 cm length

18.21.1.1 15 mm nominal bore

42 MR Supply Installation, Testing and Commisioing of 15 liter geyser 1 Each 15,000.00 15000

Supply Installation, Testing and Commisioing of Handicap Toilet special

43 MR fixtures to the complete satisfaction of the engineer in charge

(a) SITC of Grab Bar vertical swing white 1 Each 9,867.00 9867

(b) SITC of Grab Bar Left/Right 90 angle, White 1 Each 7,271.00 7271

SITC of Grab Bar 842mm long white, White

Digitally signed by AMIT

Providing, fixing, jointing and testing in position of ISI marked UV stabilized

UPVC pipes for soil, waste, and vent, Type-B as per IS : 13592 suitable

for rubber ring joints, including all neccessary specials and fittings (confirming

to IS:14735) i.e. bends, tees, junctions (with or without doors), reducers, WC

connectors, couplers, expansion joints / bellows, cowels, clamps, rubber

rings, clean outs etc. fixing at wall/ ceiling/ floor level supported by clamp &

hangers etc. in concealed / inside duct / under floor & basement ceiling /

external work etc. including chase cutting as required, excavation and back

44 MR filling in all kind of soils, suspended from floor under false ceiling or

embedding the pipes laid under floors / building in 75 mm. alround 1:2:4

cement concrete (1 cement : 2 coarse sand : 4 graded stone aggregate 20

mm nominal size) including cost of shuttering for proper completion of the

work, breaking and making good the walls and floors etc. after pipes have

been duly laid and tested. The rubber ring shall confirm to IS:5382.

The Pipes will be supported with threaded G I rods & U clamps with nuts,

washers etc on 50x50x5 mm slotted angle. The cost will include all support

arrangements. The work includes commissioning of all pipes lines as per

drawings and specifications and as directed by engg-in-charge at site.

110 mm dia (Wall Thickness - 3.2 to 3.8 mm) 15.00 metre 536.00 8040.00

75 mm dia (Wall Thickness - 3.2 to 3.8 mm) 3.00 metre 416.00 1248.00

Providing, fixing, jointing and testing in position ISI marked (IS:4985) UPVC

pipes of min 6 Kg/ Sqcm rating with fitting for waste pipe from fixtures to

floor trap including reduces, enlarger, socket, couplers, bends, tees etc

45 MR including fixing at wall/ ceiling level supported by clamp & hangers etc. cutting

holes in wall/ floors/ slabs and making good the same with cement concrete

1:2:4 complete as required.

Providing & fixing UPVC Floor trap of self cleansing design with stainless

steel grating complete in all respects.

47 MR Plain Floor Trap (4" Ht) with 50 / 75 outlet and with height raiser 4 each 536.00 2144.00

Extra for providing & fixing 125 mm dia C.P. grating in place of C.I. grating

over floor traps.

Providing & fixing of SS Floor Cleanout, round or square with rubber seal

49 MR and flat round cover with screws and other required fitting complete as 4 each 1001.00 4004.00

Supply, Installation, Testing and Commisiong of HAND SHOWER (HEALTH

50 MR FAUCET) WITH 8mm DIA 1.2 METER LONG FLEXIBLE TUBE 1 each 2205.00 2205

Digitally signed by AMIT

SCHEDULE OF QUANTITIES - ELECTRICAL WORKS

DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

S NO UNIT QUANTITY RATE

2022 DSR (INR) NON-DSR (INR)

A POINT WIRING

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC

insulated copper conductor single core cable in surface / recessed medium class PVC

1.10 conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5

sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.

Wiring for group controlled (looped) light point/ fan point/call bell point (without independent

switch etc.) with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in

1.55 surface / recessed PVC conduit, and earthing the point with 1.5 sq.mm. FRLS PVC insulated

copper conductor single core cable etc as required.

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single

A.3 1.12 core cable in surface/ recessed medium class PVC conduit alongwith 1 No 4 sq. mm FRLS Metre 2720 334.00 908480.00

PVC insulated copper conductor single core cable for loop earthing as required.

Supplying and fixing following modular switch/ socket on the existing modular plate & switch

1.24 box including connections but excluding modular plate etc. as required.

1.24.4 3 pin 5/6 amp socket outlet Each 230 122.00 28060.00

1.24.5 6 pin 15/16 amp socket outlet Each 27 197.00 5319.00

Supplying and fixing modular blanking plate on the existing modular plate & switch box

A.6 1.26 excluding modular plate as required. Each 10 40.00 400.00

Supplying and fixing following size/module, GI box along with Modular base & cover plate on

existing modular metal boxes etc. as required.

B SUBMAIN AND CONTROL WIRING

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC

1.14 insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit

1.5 sq. mm + 1 X 1.5 sq. mm earth wire

1 Digitally signed by AMIT

B.1 2 X 4 sq. mm + 1 X 4 sq. mm earth wire

1.14.4 2 X 6 sq. mm + 1 X 6 sq. mm earth wire Metre 20 439.00 8780.00

1.14.10 4 X 10 sq. mm + 2 X 6 sq. mm earth wire Metre 60 1005.00 60300.00

1.14.11 4 X 16 sq. mm + 2 X 6 sq. mm earth wire Metre 40 1365.00 54600.00

Supplying and making end termination with brass compression gland and aluminium lugs for

9.1 following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1

KV grade as required.

Supply of following XPLE armourned 1.1 KV grade conforming to I.S.7098/1554Aluminium

Conductor Cables :

MR Supply of following sizes of PVC sheathed PVC/XLPE insulated Aluminium conductor

armoured cable of 1.1 KV grade conforming to IS:7098 part-1 / IS:1554 part-1 respectively &

C.2 ISI marked.

(c ) 3.5 C x 70 Sqmm XLPE cable 102.70 2054.00

(d) 3.5 C x 50 Sqmm XLPE cable RM 50 510.00 25500.00

(e) 3.5 C x 35 Sqmm XLPE cable RM 50 378.00 18900.00

Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit

2.10 breaker suitable for inductive load of following poles in the existing MCB DB complete with

D.2 connections, testing and commissioning etc. as required.

Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB

complete with connections, testing and commissioning etc. as required.

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB

distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral

bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as

D.4 required. (But without MCB/ RCCB/ Isolator)

MR 12 way (4 + 36), Double door Each 4 9081.00 36324.00

Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts,

2.14 residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in

the existing MCB DB complete with connections, testing and commissioning etc. as required.

2 Digitally signed by AMIT

E PROVISIONS FOR VOICE, DATA, SECURITY & TV SYSTEMS

Supplying and fixing following modular switch / socket on the existing modular plate & switch

1.24 box including connections but excluding modular plate etc. as required.

1.24.7 TV socket outlet Set 4 148.00 592.00

1.24.6 Telephone socket outlet Set 52 148.00 7696.00

Supply, Installation, Testing and Commisioning of Galavanized Iron (GI) Raceways along with

MR required suitable number of GI couplers for joining raceways and fixing GI brackets and all

accessories complete in all respect as per the directions of engineer in charge

(a) 300mmx38mm(GI) - 3 compartment Mtr 10 1639.26 16392.60

E.9 (b) 225mmx38mm(GI) - 3 compartment Mtr 20 1339.36 26787.18

Supply, Installation, Testing and Commisioning of Junction boxes for direct access to cables

at the intersection of raceways supplied completely with base and cover plates, height

MR adjustable junction box 65- 90 mm including all accessories ss plate of 3mm thick complete

in all respect as per the directions of engineer in charge

Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE

E.11 1.19 insulated, shielded with fine tinned copper braid and protected with PVC sheath in the exisitng Meter 120 47.00 5640.00

surface/recessed steel/ PVC conduit as required

Supplying and fixing of following sizes medium class PVC conduit aong with accessories in

1.21 surface/ recess including cutting the wall and making good the same incase of recessed

E.12 conduit as required

Supplying and Installation of following size perforated of painting with powder coating M.S.

cable trays of perforation of not more than 17.5% in convinient sections, joined with

4.1 connectors suspended from the cieling with MS suspenders including bolts and nuts painting

suspenders etc as required

4.1.6 450 mm width x 50 mm depth x 2 mm thickness Metre 10 1137.00 11370.00

E.14 1.18 Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper

1.18.1 conductor,

1 Pair unarmoured telephone cable in the existing surface/ recessed steel/ PVC conduit Meter 1040 31.00 32240.00

Earthing with GI earth plate 600 mm X 600 mm X 6 mm thick including accessories, and

F.1 5.4 providing masonry enclosure with cover plate having locking arrangement and watering pipe SET 2 6256.00 12512.00

of 2.7 metre long etc. with charcoal/ coke and salt as required.

3 Digitally signed by AMIT

Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc.

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as

F.4 5.16 Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required. MTR 100 70.00 7000.00

G PANEL BOARDS

Fabricating, Installing, Testing & Commissioning of automatic mains failure control

including auto by-pass panel, suitable for 125 KVA silent type DG set complete with

relays, timers, set of CTs for metering & protection and energy analyser to indicate

currents, phase and line voltages, frequency, power factor, KWH, KVARH & provision

for overload, short circuit, restricted earth fault, under frequency, control cabling from

AMF panel to diesel engine and elsewhere if required, all complete and inter locking

including the following:sheet steel cubicle type panels fabricated from 14 guage

thick CRCA sheet, dust and vermin proof, indoor type MV Panels with hinged lockable

doors fabricated from 2mm thick CRCA sheet, suitable for 415V, 3 phase 4 wire 50Hz

AC supply with rear / bottom access for cable alley and with segregated bus-bar

chamber and including supplying and fixing following switchgears, meters and

accessories, inter-connections, bonding to earth, bottom base channel of MS section

not less than 100mmx50mmx5mm (thick). Fabrication shall be done in transportable

section ,entire panel shall have a common earth busbar at rear with 2 nos earth stud

cable alleys, cable gland plates powder coated painting of approved shade after

antirust treatment (with min seven tanks ) and marking as specified. Switch boards

complete as per schematic diagram:

Colour: Gray Powder Coated, as per approved sample.

Note: All MCCBs of 250 amps and below rating shall be provided with thermal

magnetic release

1nos, 160 Amps. & pole

Four MCCBs above

Moulded 250 Circuit

Case amps Breaker

rating shall be breaking

of fault providedcapacity

160 Amps. up pole

Four to 433 V) completewith

Moulded extended

Case Circuit BreakerRotary Mechanism

breaking capacity 36

1 (ICS=100% ICU

300 Amp. upvolt

AC V) completewith

3 duty extended

4 pole contactor Rotary Mechanism and

1 No. 300 A 415V, AC , 4P Manual Changeover with Operating Handle

Auto/Manual/Test/Off selector switch

2 Nos. over voltage relay, 2 Nos. reverse power relay and 2 Nos. under voltage relay.

3 Sets of current transformers 15 P 10 accuracy for protection and 15 VA class-I for

Energy analyser unit to indicate current voltage frequency power factor and KWH

Indicating lamps for load on mains and load on set

Fuse for instruments

Battery charger, complete with transformer/rectifier, D.C. voltmeter and ammeter,

selector switch

Main supply for trickle,

failure monitor off and boost and current adjustment.

Supply Failure Timer

4 Digitally signed by AMIT

Restoration Timer

Control unit with three impulse automatic engine start/stop and failure to start lockout

Impulse counter with locking and reset facility.

ON/OFF/Control circuit switch with indicator

Audio/Video annunciation for.

(i) High water temperature

(ii) Low lubricating oil pressure

(iii) Engine over speed

(iv) Engine fails to start

(v) Full load/maximum load warning

TPN aluminum bus bars of minimum of 250 Amps capacity with heat shrinkable colored

sleeves and I/C DMC/SMC bus bars supports at required intervals complete for cross section,

size supports & their spacing etc. for withstanding fault level of 25 MVA for 1 Sec.

(a) 63 Amps, TPN, MCB -4 Nos.

(b) 40 Amps, TPN, MCB - 6 nos

Panel complete as above Each 1 225000.00 225000.00

Providing and fixing MV danger notice plate of 200mm x 150mm made of mild steel, atleast 2

16 2.21 mm thick, and vitreos enamelled white on both sides and with iscription in single red colour on Nos. 2 269.00 538.00

front side as required

MR Supply, Installation, Testing and Commissiong of 10 KVA True Online UPS 3 Phase Input -

3Phase Output in Parallel Redundant N+1 Configuration IGBT Based Rectifier and IGBT

Based Inverter Batteries:12 V, SMF Amararaja/Exide with minimum VAH capacity of 15600

suitable for 15 minutes backup with each ups Along with Accessories Rack, Interlinks, SFU,

17 Parallel Kit, DC Cable Upto 5 Meters complete in all respect as per the directions of the Nos. 2 407100.00 814200.00

engineer in charge. UPS should have availability of Input /Output isolator, Inbuilt manual

bypass along with phase sequence corrector. UPS Efficiency shall not be less than 94% from

25% to 100% Load

Total of Electrical items 1765196.00 1475490.14

5 Digitally signed by AMIT

SCHEDULE OF QUANTITIES - HVAC WORKS

DSR HVAC TOTAL TOTAL

S No 2019/DSR DESCRIPTION UNIT QUANTITY RATE AMOUNT AMOUNT

EM 2018 DSR (INR) NON-DSR (INR)

Supply Installation, Testing & Commissioning of modular type Variable Refrigerant

Flow/Variable Refrigerant Volume air cooled Outdoor units suitable for cooling and heating,

having all hermetically sealed inverter type Scroll Compressor(s), minimum two compressors

for above 14 HP modules, microprocessor based Controller, top discharge type condensing

unit(s), with R 410 A Refrigerant, vibration isolators, with suitable foundation etc. complete as

1 1.0 required. The unit shall deliver the rated capacity at AHRI Conditions and work even at 50°C per HP 38 16415.00 623770.00

ambient temperature without tripping. The unit shall be suitable to work on 400V +/- 10%, 3

Phase, 50Hz AC power supply. The unit shall be filled with first charge of the refrigerant and

ready for use as required. The COP at AHRI conditions shall not be less than 3.1 and IEER

not less than 6.5 .

Supply, installation, testing and commissioning of following minimum capacity 4-way flow

VRV/VRF Cassette Type Indoor ceiling mounted unit equipped with synthetic washable

media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed

motor, coil section with DX Copper coil, electronic expansion valve, outer cabinet, drain

pump, grill, necessary supports, vibration isolation, cord less remote control etc., suitable for

2 2.0 operation on

single phase 230 V ± 10%, 50Hz AC supply, complete, as required. The unit shall have

automatic force shut down provision in case of fire on receiving signal from BMS System.

The cooling capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19

Degree C WB temperature.

Supply, installation, testing and commissioning of following minimum capacity VRV/VRF High

wall type Indoor unit equipped with washable synthetic media pre-filter, fan section with low

noise fan/dynamically balanced blower, multispeed motor, coil section with DX copper coil,

electronic expansion valve, outer cabinet, cord less remote control, drain pan, necessary

3 3.0 accessories etc., suitable for operation on 230 V ± 10%, 50 Hz, single phase AC supply,

complete as required. The unit shall have automatic force shut down provision in case of fire

on receiving signal from BMS System. The cooling capacity of indoor unit will be at air inlet

conditions of 27 Degree C DB and 19 Degree C WB temperature.

Digitally signed by AMIT

Lifting, Shifting, Supply, Installation, Testing & Commissioning of Interconnecting "Y" & "T"

4 4 Joints i.e. Refnet Joints/ Header with Insulation for refrigearnt piping

Refrigerant Piping

Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen

testing of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF

system, complete with fittings, with suitable adjustable ring type hanger supports,

jointing/brazing including accessories, insulated with XPLE Class-O tubular insulation/with

Class-O closed cell elastometric nitrile rubber tubular sleeves sections of specified thickness

as given below for Suction and Liquid lines, all accessories as per specifications etc. as

5.1 5.1 6.4 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 80 245.00 19600.00

5.2 5.2 9.5 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 200 331.00 66200.00

5.3 5.3 12.7 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 80 466.00 37280.00

5.4 5.4 15.86 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 200 588.00 117600.00

5.5 5.5 19 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 30 707.00 21210.00

5.6 5.6 22.2 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 30 865.00 25950.00

5.7 5.7 25.4 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 20 1022.00 20440.00

5.8 5.8 28.58 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 20 1108.00 22160.00

5.9 5.9 31.8 mm dia (OD) (Hard drawn) with tube thickness 1.62 mm with 19 mm thick insulation m 5 1170 5850

6 5.10 34.9 mm dia (OD) (Hard drawn) with tube thickness 1.62 mm with 19 mm thick insulation m 5 1230 6150

6.1 5.11 38.1 mm dia (OD) (Hard drawn) with tube thickness 1.62 mm with 19 mm thick insulation m 5 1265 6325

5.12 41.27 mm dia (OD) (Hard drawn) with tube thickness 1.62 mm with 19 mm thick insulation m 5 1309 6545

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC

insulated copper conductor, single core cable in surface/ recessed medium class PVC

conduit as required.

Supply,installation,testing and commissioning of PVC drain water with necessary clamps,

fittings such as bends tees etc. and duly insulated.

Supply, Laying, Termination of ISI Certified 4 Core 1.0 sq.mm ATSC, FRLS ,PVC insulated,

Unarmored, Tinned Copper, twisted, shielded, PE insulated, VAV Communication Cable

10 MR with proper ferrules, lugs and other necessary accessories. The spec shall meet the system Rmt 280 280.00 78400.00

manufacturer specifications. 2

Digitally signed by AMIT

Total HVAC WORKS 1569787.00 335651.00

Digitally signed by AMIT

SCHEDULE OF QUANTITIES - LIGHTING WORKS

S NO DSR/MR Description Unit QTY Rate DSR AMOUNT NON DSR AMOUNT

Supply, Installation, Testing and Commissioing of LED Pendant luminaire with

LED(Light Emitting Diode) system power: 28W, 120 LM/W system efficacy,

colour temperature of 4000K, neutral white, 230V constant current driver, 70%

of luminous flux after 50,000 operating hours, energy efficient LEDs, CRI>80,

luminous flux of 3360 lm, MacAdam 3, T.H.D≤10%, driver efficiency ≥ 88%,

surge protection of 2.5kV, direct light emission, Aluminium body, polyester

white powder coat applied over a 5-stage pre-treatment, Prismatic diffuser for

glare-free uniform light, UGR<19, Electronic control gear

Protection class I, IP40, L =1195mm, B = 295mm, H = 67mm, PH = 1500mm

Supply, Installation, Testing and Commissioing of Recessed downlightwith

HPE (High-Performance Efficiency) with LED (Light Emitting Diode), system

power: 12 W, Luminous flux of luminaire 1320 lm, 110 LM/W system efficacy,

Colour temperature of 4000 K, Neutral white, CRI > 80, 230V constant current

driver, 70% of luminous flux after 50,000 operating hours; energy-efficient

LEDs, direct light emission, housing in die-cast aluminium, Polyester powder

2 MR white coloured coat applied over a 5-stage pre-treatment trim, prismatic no 54 1394.00 75276.00

diffuser for homogenous light distribution, ZHLS (ZERO HALOGEN LOW

SMOKE) wiring, Electronic control gear,

Protection class II, IP 40, Ø = 175 mm, DA(Ø) = 160 mm, H = 59 mm

Supply, Installation, Testing and Commissioing of Pendant/Recessed

luminaire with LED (Light Emitting Diode), system power 28 W, luminous flux

of luminaire 3080 lm, 110 LM/W system efficacy, direct light emission CRI>80,

colour temperature of 4000K, Neutral white, 230V constant current driver, 70%

of luminous flux after 50,000 operating hours, energy efficient LEDs, luminaire

profile in aluminium, Plastic moulded end caps, Polyester powder Aluminium

white coloured coat applied over a 5- stage pre-treatment, high efficiency glare-

3 MR free snap fit micro-prismatic diffuser for homogeneous light distribution, ZHLS no 58 4001.00 232058.00

(Zero Halogen Low Smoke) internal wiring, integral Electronic control gear,

adjustable suspender, including cost of all connectors to create continuous

cascading effect.

Protection class I, IP 20, L = 1199 mm, B = 75 mm, H = 90 mm, PL max =

1 Digitally signed by AMIT

Supply, Installation, Testing and Commissioing of Pendant/Recessed

luminaire with LED (Light Emitting Diode), system power 14 W, luminous flux

of luminaire 1500 lm, 110 LM/W system efficacy, direct light emission CRI>80,

colour temperature of 4000K, Neutral white, 230V constant current driver, 70%

of luminous flux after 50,000 operating hours, energy efficient LEDs, luminaire

profile in aluminium, Plastic moulded end caps, Polyester powder Aluminium

white coloured coat applied over a 5- stage pre-treatment, high efficiency glare-

free snap fit micro-prismatic diffuser for homogeneous light distribution, ZHLS

(Zero Halogen Low Smoke) internal wiring, integral Electronic control gear,

adjustable suspender, including cost of all connectors to create continuous

cascading effect.

Protection class I, IP 20, L = 599 mm, B = 75 mm, H = 90 mm,

Supply, Installation, Testing and Commisioning of Recessed downlight with

LED (Light Emitting Diode) system power: 5W, Luminous flux of luminaire 400

lm, Colour temperature of 4000 K, Warm white, CRI > 80, 230V constant

current driver, 70% of luminous flux after 50,000 operating hours; energy-

efficient LED, direct light emission, housing in die-cast aluminium, Polyester

powder white coloured coat applied over a 5-stage pre-treatment ceiling trim,

5 MR with reflector, beam angle of 24°, Electronic control gear, no 49 1200.00 58800.00

Protection class II, IP 20,

Supply, Installation, Testing and Commisioning of Recessed with trim

luminaire with Pinspot light with LED(Light Emitting Diode) system power: 8W,

luminous flux of luminaire 640lm, colour temperature of 4000K,

CRI > 90, SDCM<3, THD<10%, 230V constant current driver,

70% of luminous flux after 50,000 operating hours, direct light

emission, aluminium housing with trim, polyester Black powder

coat applied over a 5 stage pre-treatment on trim, with lens and

a beam angle of 36° and external Electronic control gear

Protection class II, IP20

SITC of Strip Light LED 5W per meter

2 Digitally signed by AMIT

SCHEDULE OF QUANTITIES - FIRE ALARM

DSR NO DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT

DSR NO DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT

2022 DSR (INR) NON-DSR (INR)

Supplying, installation, testing & commissioning of intelligent analog addressable

1 17.2.4 photothermal detector complete with mounting base complete as required. No 29 2858.00 82882.00

Supplying, installation, testing & commissioning of response indicator on surface/recessed

2 17.2.5 MS Box having two LED, metallic cover complete with all connections etc as required. No 29 276.00 8004.00

Supplying, installation, testing & commissioning of intelligent addressable thermal detector

3 17.2.9 with rate of rise cum fixed tempreature thermistor complete with base as required. No 1 2726.00 2726.00

Supplying, installation, testing & commissioning of fault isolator complete with base as

Supplying, installation, testing & commisssioning of intelligent addressable programmable

5 17.2.6 sounder complete as required. No 2 2651.00 5302.00

Supplying, installation, testing & commissioning of addressable manual call point complete as

Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed

7 17.5.2 copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath Mtr. 300 173.00 51900.00

complete as required

Supplying & Fixing of battery operated illiminated "EXIT" signage, with 2hrs power Battery

backup complete as required.

TOTAL FIRE ALARM & PA WORKS 171636.00 11610.00

Digitally signed by AMIT

SCHEDULE OF QUANTITIES: FIRE PIPING, HYDRANTS, SPRINKLERS AND ACCESSORIES

S No DSR 2022/ DESCRIPTION QTY UNIT RATE TOTAL TOTAL

MR AMOUNT AMOUNT

DSR (INR) NON-DSR (INR)

Providing, laying, testing & commissioning of 'C' class

heavy duty MS pipe conforming to IS 3589/IS 1239

including Welding, fittings like elbows, tees, flanges,

tapers, nuts bolts, gaskets etc. and fixing the pipe on the

18.7 wall/ceiling with suitable clamp/support frame and

1 painting with two or more coats of synthetic enamel

paint of required shade complete as required :

Providing, fixing, testing & commissioning of 15mm dia

18.21 quartzoid bulb type sprinklers of rating 68 degree

2 centigrade with required accessories :

18.21.1 Pendant type 68 Each 522.00 35496.00

Supplying, installation, testing & commissioning of

sprinkler flexible pipe (UL Listed) of stainless steel

complete with 15 NPT on reducer thread with maximum

working pressure of 175 PSI test pressure of 875 PSI

3 18.25 (Burst) with branch line (Inlet) 25mm NPT male thread

to sprinkler head (Outlet) 15mm NPT female thread with

reducer, nipple, 2 side brackets, center bracket,

stockbar of following sizes complete as required.

Digitally signed by AMIT

Providing and fixing ISI Marked of approved make Fire

4 Extinguishers complete with all accessories as per

manufacturer's specifications.

a) CO2 gas nozzle type - 9 Litre capacity (IS:15683). 3 NOS 12912.00 38736.00

Mechanical Foam gas cartridge type. 9 Kg capacity

ABC dry powder stored pressure type 6 kg capacity

Digitally signed by AMIT

SCHEDULE OF QUANTITIES: IT

TOTAL TOTAL AMOUNT

TOTAL TOTAL AMOUNT

S No Description UNIT QUANTITY RATE AMOUNT

A. UTP Components for Data DSR (INR) NON-DSR (INR)

Supply, Fixing & Laying of CAT 6A UTP cable 23 AWG solid copper

conductors for Connectivity of Hub room to End Point.High Speed Gigabit

1 Ethernet U/UTP, 250 MHz, Class E, 23 AWG, Unshielded LSZH Cable, C6 Mtr 4680 58.00 271,440.00

Supply, Installation, Testing and Comissioning of I/O port for CAT6A cable

2 termination at Work Station end. Keystone Unshielded Outlet, 180DG C6 Nos. 117 256.00 29,952.00

Supply , Installtion , Testing and Comissioning of CAT6A patch cord 2 Mtr (7

feet) for information outlet (I/O) to end user device connectivity.High Speed

Gigabit 24AWG U/UTP Patch Cord, LSZH, C6

Supply , Installtion , Testing and Comissioning of CAT6A patch cord 1 Mtr (3

4 feet) for information outlet (I/O) to Rack End Redantant device Nos. 117 279.00 32,643.00

connectivity.High Speed Gigabit 24AWG U/UTP Patch Cord, LSZH, C6

Supply , Installtion , Testing and Comissioning of 24 port Loaded Jack Panel

5 for CAT6A cable termination at rack end. Data Active Nos. 6 11,531.00 69,186.00

C. Backbone Component

6 SITC of Multimode Fiber Patch Cord Nos. 1 950.00 950.00

Network Rack and Other Accessories

7 SITC of 32U Rack Wall Mount Nos. 1 30,000.00 30,000.00

SITC of router with Aggregate Throughput (Default) 100mbps, Aggregate

8 Throughput (Performance License) 500Mbps, Total onboard WAN or LAN Nos. 1 150,000.00 150,000.00

10/100/1000 ports 2nos, RJ-45-based ports 4nos, SFP-based ports 2nos,

SITCslots 2nos, Default

of Access Switch memory DDR3 of

with minimum ECC DRAM

24x (data plane)

10/100/1000 2gb,ports, 4x

10 Gig SFP+ ports for uplink ports(supporting Single mode & Multi mode

SITC of Hardware controller managed Indoor Wi-Fi Access Point with

Adapter for power supply

SITC of 1 Gig SR transceivers/equivalent LC connector MM

1 Digitally signed by AMIT

SCHEDULE OF QUANTITIES: CCTV

Total Estimate Estimate

Sr No Item Description UoM

Qty Rate Amount

SITC of 2MP, 1/2.8” CMOS image sensor, low illuminance, high image definition, Outputs 2MP

(1920 × 1080) @ 25/30 fps Built-in IR LED, max IR distance: 30 m, Intelligent detection: Intrusion,

tripwire,Abnormality detection: Motion detection, video tampering, no SD card, Supports max. 256

GB Micro SD card, IP67, IK10 protection etc all complete.

SITC of 8 channel Smart H.265+/H.265/Smart H.264+/H.264/MJPEG decoding format. · Max.

decoding capability: 32 × 1080p@30 fps or 32 × 2MP@30 fps. · Max. 384 Mbps

incoming/recording/outgoing bandwidth. · Support AcuPick with Max. 16-Channel. · Support N+M

cluster. · AI by recorder: 2-channel face detection and recognition, 4-channel perimeter protection,

and 8-channel SMD Plus. · AI by camera: Face detection and recognition, perimeter protection,

SMD Plus, metadata, ANPR, stereo analysis, heat map, and people counting etc all complete.

3 SITC of Hard Disk 16TB required for the above NVR etc all complete. No's 1 47,855.00 47,855.00

4 CAT6 Patch Chord in existing Network Rack No's 6 5,800.00 34,800.00

5 CAT6 IO / Connector at camera location No's 6 5,000.00 30,000.00

Digitally signed by AMIT

SCHEDULE OF QUANTITIES: EPABX

Sr No Item Description UoM Rate DSR Amount

1 SITC of EPABX Intercom with 4 incoming lines and 64 Anolog Extensions complete in all respect No's 1 55,000.00 55,000.00

2 SITC of Analog Phones No's 52 1,500.00 78,000.00

Digitally signed by AMIT

SCHEDULE OF QUANTITIES: Audio Visual

Unit rate Total

Sr No Item Description UoM

SITC of Cable Cubby with flip top, cover and 6 Pass Through Holes for multi-

1 format cables, 2 Universal Power Socket , 1 HDMI, 1 USB-C for Data Transfer, No's 2 26,850.00 53,700.00

made of aluminium etc all complete etc all complete

SITC of 2m/6.5ft HDMI 2.0 Cable, 18Gbps 4K60Hz, Dolby Vision & HDR,

ARC,CEC, ALLM, VRR, | CL3 & VW-1 Rated etc all complete

SITC of10m HDMI 2.0 AOC | 24Gbps | 4K60Hz | Dolby Vision & HDR | ARC, CEC,

ALLM & VRR | ISF Certified | FT4, CL4 etc all complete

SITC of 2m/6.5ft USB-C to C Cable | SuperSpeed USB 20Gbps | 4K60 Alt-Mode |

100w PD etc all complete

5 SITC of Various Cables & Connectors etc all complete No's 1 11,950.00 11,950.00

Digitally signed by AMIT

SCHEDULE OF QUANTITIES: FURNITURE

S NO DESCRIPTION/ SPECIFICATIONS QTY UNIT PRICE AMOUNT

TABLE FOR ZONAL / REGIONAL MANAGER

TABLE- W 2100 x D 1000 x H 750mm SIDE TABLE- W 1400 x D 550 x H 750mm

Main Table: The table top dimensions will be 2300x 1000x750 mm made in PLB (Pre

laminated Fibreboard) with the density of 680kg/m³ and 25mm thick one side pre-laminate

board confirming to IS-14587:1998. Surface: CPL (continuous pressure laminate) in 0.5mm

thickness in melamine finish. The PLB will be confirming to E-1 Grade as per the JIS A 5905-

2003 standards and approved shade confirming to IS-12823:1990. 2 mm thick PVC edge band

will confirm to DIN 68861 for resistance to clearers. The edge band material should have Shore

D hardness of 79± 4. The Hot melt glue used for fixing the PVC edge band should have ISO

9001- 2015 quality certification confirming to ASTM D 4499 standards for viscosity and thermal

stability. The top surface will have 30 mm aluminium channel ( Z Section) all round the main

1 table at the edges below the top surface. There will be a support pedestal extended by 200 mm 2 NOS 154611 ₹ 309,222.00

on the right side below the main table thus achieving over all dimension of 2300 x1000 mm.

The return table will be 1300x550 mm in PLB confirming to IS- 14587:1998. Surface: CPL(

continuous pressure laminate) in 0.5mm thickness. The PLB will be confirming to E-1 Grade as

per the JIS A 5905-2003 standards and approved shade confirming to IS-12823:1990. 2 mm

thick PVC edge band confirming to DIN 68861 for resistance to clearers. The edge band

material should have Shore D hardness of 79± 4.. The hot melt glue used for fixing the PVC

edge band should have ISO 9001- 2015 quality certification confirming to ASTM D 4499

standards for viscosity and thermal stability. The return table will be connected to the main

table by structurally engineered MS connector of thickness 2mm which has undergone zinc

passivation confirming to IS:1573 – 1986. Two connectors will be used.

Support bracket: The main table and the return table will be supported by 130 mm high

Digitally signed by AMIT

S NO DESCRIPTION/ SPECIFICATIONS QTY UNIT PRICE AMOUNT

aluminium die cast structural bracket designed in “V” shape to withstand at optimum load,

made in LM6 (Al-Si12 - EN1706 AC-44100), confirming to BS 1490:1988 LM6, The structural

bracket will have suitable design to rest on the support pedestal and the Gable End panel. The

aluminium bracket will be powder coated as per the approved colour. The aluminium bracket

should undergo 7 step rust resistance pre treatment process viz degreasing, pickling as per IS

Modesty panel: The table will be provided with Modesty panel connecting the support

pedestal and the gable end- size 1420x 450 mm. The modesty will be made in PLT(laminated

both sides) 18 mm thick confirming to E-1 Grade as per the JIS A 5905-2003 standards and

approved shade confirming to IS-12823:1990. The modesty have 2 mm thick PVC edge band

confirming to DIN 68861 for resistance to clearers. The edge band material should have Shore

D hardness of 79± 4.

Support pedestal: The support pedestal size 600(W) x 850(D)x 590(H)will be made in PLB

confirming IS- 14587:1998. The PLB will be 25 mm thick PLT. Pedestal construction will be in

three equal drawer box construction made in 12 mm PLT in black finish . Drawer facia will be

made of 25mm thick PLB one side pre-laminate board confirming to IS-14587:1998. Drawer

telescopic channel will have extension of 450 mm with silver anodised finish. The slides will be

cycle tested to BIFMA standards- minimum 50000 times .

Gable End: The under structure will have on one side gable end support 50 mm thick in

PLT(Laminated both sides) confirming to E-1 grade as per IS- 12823:1990. The 50 mm thick

Gable end shall comprise of 25 mm PLT + 25 mm PLB as per IS: 12823. The edges will have

2 mm PVC edge band confirming to DIN 68861 for resistance to clearers. The edge band

material should have Shore D hardness of 79± 4.. The hot melt glue used for fixing the PVC

HB CHAIR FOR ZONAL / REGIONAL MANAGER

Supply and Placing in position of High Back Chairs of approved make. The seat shall be made up of 1.2+/-

0.1cm thick hot pressed plywood and upholstered with synthetic leather and moulded polyurethane foam.

The back shall be made up 1.2+/-0.1cm thick hot pressed plywood upholstered with replaceable synthetic

leather upholstery covers and moulded polyurethane foam. The back ply and foam is designed with

contoured lumbar support for comfortable seating posture. The moulded polyurethane foam shall be of

density 45+/-2kg/m ³, and hardness load 16+/-2kgf as per IS:7888 for 25% compression. The dimensions of

seat shall be- 51.0cm(W) x 48.0cm(D) and of back shall be 48.0cm(W) x 76.0cm(H). The armrest top shall

be made of moulded polyurethane and mounted on to a drop lift height adjustable type M.S tubular armrest

support chrome plated. The armrest height shall be adjustable up to 6.5+/-0.5cm in 4 steps. The mechanism

of the chair shall have following features: 360⁰ revolving type, Knee tilt synchro mechanism, Tilt tension

adjustment, Single point control, 4 position locking with anti shock feature, seat back tilting ratio 1:2, Chair

should have seat sliding mechanism. The backrest shall consists of a sliding up down mechanism, Which

can be adjusted in the range of 7.0+/-0.5cm and should be locked in 4 positions for correct position of lumber

support. The chair shall be provided with pneumatic height adjustment which shall have stroke of 10.0 +/- 0.3

cm. The pedestal shall be fabricated from 0.2+/-0.02cm thick HR sheet, chrome plated and assembled with

injection moulded black polypropylene hub cap. The size of the pedestal shall be 66.0+/- 0.5 cm pitch-

centredia (76.0 +/- 1.0 cm with castors). The twin wheel castors shall be made black nylon. Overall

dimensions of Chair shall be, Width of Chair - 76.0cm, Depth of Chair - 70.7cm as measured from pedestal

below. Height from ground - min 103.5 to max 120.5cm. Seat height - min 47.5 to max 57.5cm. All the

dimensions will be as per the Original Manufacturer's Specifications. The product should be certified with

BIFMA, Greenguard, ISO 9001:2015 and ISO 14001:2015 complete as per approved sample and as per the

Digitally signed by AMIT

S NO DESCRIPTION/ SPECIFICATIONS QTY UNIT PRICE AMOUNT

VISITOR CHAIR FOR ZONAL / REGIONAL MANAGER

Supply and Placing in position of Visitor Chairs of approved make. The seat is cushioned seat made of

injection molded plastic outer & inner. Plastic inner is upholstered with leatherette and molded high resilience

polyurethane foam of density 45±2 kg/m³, & hardness load of 16±2 kgf as per IS:7888 for 25% compression.

Seat Size is 47.0 W cm x 48.0 D cm. The back is cushioned made of PU foam with insitu molded M.S. ERW

3 round tube of size 1.9±0.03cm x 0.16±0.0128cm, upholstered with leatherette. The back size is 47.7 W cm x 6 NOS ₹ 14,910.30 ₹ 89,461.80

60.1 D cm. The tubular frame is cantilever type and made of Ø2.54±0.03cm x 0.2±0.016 cm thick SS 202

tube. The back connected to frame through chrome plated high pressure die casted connector pipe. All the

dimensions will be as per the Original Manufacturer's Specifications. The product should be of BIFMA

compliance, ISO 9001:2015 and ISO 14001:2015 complete as per approved sample and as per the direction

of EngineerIn-charge.

SOFA 3-SEATER FOR REGIONAL MANAGER

SPECIFICATION:-

Seat Foam: the sofa is made up of fine quality leatherette.The structure is made up of silver

wood and pine wood.The Seat is made of PU Foam with Density 32 to 40 +/- 2 kg/cu .mtr

Seat is upholstered wuth Leatherite.Back Foam: The Back is made of PU Foam with Density

32 to 40 +/- 2 kg/cu, Backis upholstered with Leatherite.Unterstructure is made up of silver

wood or pine wood , 4mm Dia zigzag Spring is mounted in the understructure for support and

additional cushioning purpose. Legs should be made up of solid wood having pu matt finish.

CORNER TABLE FOR REGIONAL MANAGER

SPECIFICATION:-

The top of the table shall be made up of 12mm thick toughened glass. The top profile shall be

in square shape with bevelled edges. The top shall be supported on vacuum caps situated

over SS 202 grade pipe frame. The under structure shall have SS with shiny chrome finish

5 pipe frame having dia. 20-25.4mm with 2mm thick. There shall be good quality PPCP shoe 2 NOS ₹ 9,808.80 ₹ 19,617.60

provided to avoid scratches on the floor.Top glass is partial tempered glass.

Digitally signed by AMIT

S NO DESCRIPTION/ SPECIFICATIONS QTY UNIT PRICE AMOUNT

TABLE FOR DEPUTY MANAGER AND AUDIT ROOM

TABLE SIZE:-1500W X 750D X 750HT

EXTENTION:-900W X 450D X 750HT

SPECIFICATION:-

MAIN TABLE:- The main table shall be made of 25mm thick PLB one side pre-laminate board

confirming to IS-14587:1998. Soft closing access flap with in-built power box to be provided

on work surface for wire management. Return table Work Surface should be made of 25mm

thick PLB one side pre-laminate board confirming to IS-14587:1998. PLB will be E1-P2 grade

and approved shade. Confirming to IS-12823:1990. 2 mm thick PVC edge band will confirm to

DIN 68861 for resistance to clearers. The edge band material should have Shore D hardness

of 79± 4. The Hot melt glue used for fixing the PVC edge band should have ISO 9001- 2015

6 quality certification confirming to ASTM D 4499 standards for viscosity and thermal stability. 10 NOS ₹ 31,626.60 ₹ 316,266.00

The edges should be PVC Edge banded with matching finish or have an option of reverse

water fall edges.Modesty Panel shall be made of 18mm thick PLT both sides pre-laminate

board confirming to IS-14587:1998.The height of modesty shall be 450 mm.The modesty panel

will be connected to the main table by 2 nos special Aluminum extruded brackets. The

modesty will be fixed 150 mm from the edge of the table.Wire Management:Continuous PVC

Cable Tray with provision to mount switches and sockets as per client requirement. Vertical

wire entry cover for wire uptake from floor to cable tray and 300mm Aluminium Flip Up for

swicth access.Legs and Supports:- The MS supports are made of 50 x50mm square ERW

tubes- 16g with levelers to cater for floor undulations- +/- 20 mm. ERW Tube confirming to IS

4923 : 1997 – 16g. Main leg members will be connected through a horizontal member size

1.6mm thk, 50x25 cold formed ERW tube confirming to IS 4923: 1997. The vertical and the

HIGH BACK CHAIR FOR DEPUTY MANAGER AND AUDIT ROOM

MODEL:-ASTRO MB

SPECIFICATION:-

Chair's Seat and back is made out of 12mm molded hot pressed plywood in ergonomic shape

fitted with Imported T-nuts and revited in to the wood.Gaslift - Class 4 tested -ANSI BIFMA

performance standards.Castors - Twin Castors 50mm dia castors compling to ANSI / BIFMA X

5.1 – 2002.The 640mm dia (26 inches) five pronged base is made out of GF nylon –

Reinforced with bottom ribbing for additional buttress and strength.Tested prudently and

rigorously as per ANSI/BIFMA X5.1-2011 General Purpose Office Chair Standards.Upholstery:

Seat Cushion with pre moulded foam of 50 - 60 density Density -- 52 kg/m3 Hardness --

12.6kgf at 25%.This mechanism is manufactured out of cold Rolled Carbon Steel IS 513-1994

Sheets,The steel components are manufactured with highly precision tools For accuracy in

matching other parts for smooth functioning. The steel components are fabricated by using

Co2 welding process for giving uniform surface finish with higher tensile strength. Springs are

made out of Grade II material. Composite release levers for locking mechanism & Gas lift

height adjustment. Release lever mechanism for Locking and Gas lift height adjustment.

Back Frame is upholstered with Thinner Mesh Adjustable Lumbar Support Allows you to adjust

Digitally signed by AMIT

S NO DESCRIPTION/ SPECIFICATIONS QTY UNIT PRICE AMOUNT

VISITOR CHAIR FOR DEPUTY MANAGER AND AUDIT ROOM

MODEL:-ASTRO VA

SPECIFICATION:-

Supply and Placing in position of Visitor Mesh back Chairs of approved make. The seat shall

be made of 1.4 +/-0.1 cm thick hot pressed plywood upholsterd with fabric and moulded

polyurethane foam. It shall have fixed seat Seat size shall be 50.0 cm W x 49.0 cm D. The

back shall be injection moulded in glass filled polyamide which shall be upholstered with mesh

8 fabric. The back shall consist adjustable lumbar support made of injection moulded 26 NOS ₹ 10,449.90 ₹ 271,697.40

polypropylene having an adjustment of 6.0 +/- 0.1 cm. Back size shall be 50.0 cm W x 68 .0

cm H. The polyurethane foam for seat shall have a density of 55 +/- 5 kg/m³. The height

adjustable armrest shall be made of polyamide structure and polypropylene housing with

moulded PU arm top having an adjustment of 7.0 +/- 0.3 cm. The sled base frame shall be

Chrome plated welded tubular frame made of dia 2.8 +/- 0.03 cm X 0.2 +/- 0.02 cm thick MS

round tube. The frame shall be fitted with plastic capsmade of injection moulded glass filled

TABLE Overall size

FOR ASSISTANT of the chair shall be 62.0 cm W x 58.0 cm D x 97.0 cm H x 42.0 cm

TABLE SIZE: 1350W X 600D X 750HT

Specifications:

MAIN TABLE:- The main table shall be made of 25mm thick PLB one side pre-laminate board confirming to

IS-14587:1998. Soft closing access flap with in-built power box to be provided on work surface for wire

management. Return table Work Surface should be made of 25mm thick PLB one side pre-laminate board

confirming to IS-14587:1998. PLB will be E1-P2 grade and approved shade. Confirming to IS-12823:1990. 2

mm thick PVC edge band will confirm to DIN 68861 for resistance to clearers. The edge band material should

have Shore D hardness of 79± 4. The Hot melt glue used for fixing the PVC edge band should have ISO

9001- 2015 quality certification confirming to ASTM D 4499 standards for viscosity and thermal stability. The

edges should be PVC Edge banded with matching finish or have an option of reverse water fall

edges.Modesty Panel shall be made of 18mm thick PLT both sides pre-laminate board confirming to IS-

14587:1998.The height of modesty shall be 450 mm.The modesty panel will be connected to the main table

9 by 2 nos special Aluminum extruded brackets. The modesty will be fixed 150 mm from the edge of the table. 6 NOS ₹ 25,370.00 ₹ 152,220.00

Wire Management:Continuous PVC Cable Tray with provision to mount switches and sockets as per client

requirement. Vertical wire entry cover for wire uptake from floor to cable tray and 300mm Aluminium Flip Up

for swicth access.

Legs and Supports:- The MS supports are made of 50 x50mm square ERW tubes- 16g with levelers to cater

for floor undulations- +/- 20 mm. ERW Tube confirming to IS 4923 : 1997 – 16g. Main leg members will be

connected through a horizontal member size 1.6mm thk, 50x25 cold formed ERW tube confirming to IS

4923: 1997. The vertical and the horizontal tubes will be welded with CO2 MIG welding process confirming to

IS 816 and ISO 9692-2. The leg will be fabricated using Argon & Co2 gas mixture on a Robotic welding

machine to ensure adequate welding strength with consistency.• The legs will be connected with Cross

beams to take care of the bending stress catering up to 1800 mm length and up to 900 mm depth of the

Finish:- All metal components & aluminum die cast parts will be powder coated by Nano ceramic surface

treatment process compiled to a Bend test-ASTM D3451 – 06, Adhesion -DIN EN 14901 Salt spray test- DIN

Digitally signed by AMIT

S NO DESCRIPTION/ SPECIFICATIONS QTY UNIT PRICE AMOUNT

LINEAR WORKSTATIONS

SIZE - 1200W X 600D X 750HT AND 300HT SCREEN

Table Top: 25mm thick Pre laminate particle board with 2mm PVC

edge lipping on all exposed edges

End Legs: MS powder coated legs

Intermediate Legs: MS podwer coated 60X40mm legs and supporting

MS cross beams (40X20mm)

12 Main screen - Al 30screen with Fabric magnetic and glass marker tile 28 NOS ₹ 16,000.80 ₹ 448,022.40

Privacy screen -6mm thick acrylic on detachable studs

Modesty- 12mm PLB modesty on passage side

Wire Management

250mm Ht Racway with 65mm Dia Wire Manager Grommet

Vertical Raceway with built in separator for power and data of size 250H X 70mm thick with provision to

mount swicthes and

sockets on laminate facia with Vertical Wire Entry cover for wire uptake from floor to raceway with 65mm Dia

Wire Manager Grommet.

LINEAR WORKSTATIONS

SIZE - 900W X 600D X 750HT AND 300HT SCREEN

Table Top: 25mm thick Pre laminate particle board with 2mm PVC

edge lipping on all exposed edges

End Legs: MS powder coated legs

Intermediate Legs: MS podwer coated 60X40mm legs and supporting

MS cross beams (40X20mm)

13 Main screen - Al 30screen with Fabric magnetic and glass marker tile 2 NOS ₹ 14,042.00 ₹ 28,084.00

Privacy screen -6mm thick acrylic on detachable studs

Modesty- 12mm PLB modesty on passage side

Wire Management

250mm Ht Racway with 65mm Dia Wire Manager Grommet

Vertical Raceway with built in separator for power and data of size 250H X 70mm thick with provision to

mount swicthes and

sockets on laminate facia with Vertical Wire Entry cover for wire uptake from floor to raceway with 65mm Dia

Wire Manager Grommet.

Digitally signed by AMIT

S NO DESCRIPTION/ SPECIFICATIONS QTY UNIT PRICE AMOUNT

CHAIR FOR WORKSTATIONS / AUDIT ROOM

MODEL:- ALLWORK

Seat and back is made out of 12mm molded hot pressed plywood in ergonomic shape fitted with Imported T-

nuts and revited in to the wood.Gaslift - Class 4 tested -ANSI BIFMA performance standards.Castors - Twin

Castors 50mm dia castors compling to ANSI / BIFMA X 5.1 – 2002.The 640mm dia (26 inches) five pronged

base is made out of GF nylon – Reinforced with bottom ribbing for additional buttress and strength. Tested

prudently and rigorously as per ANSI/BIFMA X5.1-2011 General Purpose Office Chair Standards.Upholstery:

Cushion with pre moulded foam of 50 - 60 density in the shape of plywood. Density -- 52 kg/m3 Hardness --

12.6kgf at 25%.Self Calibrating Multilock Mechansim Tested as per BIFMA Standards.Back Frame is

upholstered with Thinner Mesh Adjustable Lumbar Support Allows you to adjust the lumbar support position

for good back support and blood circulation.Moulded self skinned polyurethene Arms confirming to IS 7078

with steel insets for long life. one way adjustable - Height Adjustable.Chair should have Adjustable

Headrest.Tension control is below the Seat.Seat are duly upholstered with approved fabric.hair Should be

BIFA Certified.

CONFERENCE TABLE

SIZE - 3600W X 1500D X 750HT

Specifications:

Table Top: 40mm thick pre laminated particle board with matching PVC edge

15 Support: 25mm thick pe laminated particle board with matching PVC edge lipping 1 NOS ₹ 116,230.00 ₹ 116,230.00

Modesty Panel: 1200 x 450HT- 18mm thick pre laminated particle board modesty

panel of 450mm Ht.

Wire Management: 2 no of 450mm aluminium flip up, provision to mount switches

and sockets on PVC cable dump and Vertical wire entry cover for wire uptake from

floor to cable dump

FOR CONFERENCE ROOMS

SPECIFICATION:-

Chair's Seat and back is made out of 9 layer 12mm molded hot pressed plywood in ergonomic shape fitted

with Imported T-nuts and revited in to the wood.Gaslift - Class 4 tested -ANSI BIFMA performance

standards.Castors - Twin Castors 50mm dia castors compling to ANSI / BIFMA X 5.1 – 2002.Specially

designed metal base 5 pronged structure forged out of CR Sheets of 2 mm thick. Base of diameter 26

inches for complete stability, extreme durability, sturdiness and pleasant aesthetic looks. Reinforced with

CO2 welding to provide additional strength and support. Tested prudently and rigorously as per ANSI/BIFMA

X5.1-2011 General Purpose Office Chair Standards.Upholstery: Seat Cushion with pre moulded foam of 50 -

16 60 density Density -- 52 kg/m3 Hardness -- 12.6kgf at 25%.Distinctively and characteristically designed tilt 11 NOS ₹ 9,261.00 ₹ 101,871.00

mechanism offering a very smooth and fluidic reclining motion with tension adjust knob and importantly

offering seat to back recline ratio of 3:7, optimal for good back support.Multilock mechanism is fabricated

from CR Sheets, undergo through CO2 welding process imparting uniform surface finish and tensile strength.

The components are processed with high degree of precision and care so as to assemble with other parts in

perfect harmony to give smooth and effortless reclining experience. Tension springs are made out Grade II

material conforming to Indian Standards. Also provided with release levers for locking mechanism and height

adjustment of seat. Mechanism aides to operate the height adjustment, and has been equipped with 4

locking positions, back rest “ Return Prevention” function. Back Frame is inserted with Mesh & Adjustable

Lumbar Support.Tension control is below the Seat.Moulded polyurethene Arms confirming to IS 7078 with

steel inserts for long Moulded self skinned polyurethene Arms confirming to IS 7078 with steel insets for longDigitally signed by AMIT

S NO DESCRIPTION/ SPECIFICATIONS QTY UNIT PRICE AMOUNT

TABLE FOR AUDIT ROOM

TABLE SIZE: 900W X 750D X 750HT

Specifications:

MAIN TABLE:- The main table shall be made of 25mm thick PLB one side pre-laminate board

confirming to IS-14587:1998. Soft closing access flap with in-built power box to be provided

on work surface for wire management. Return table Work Surface should be made of 25mm

thick PLB one side pre-laminate board confirming to IS-14587:1998. PLB will be E1-P2 grade

and approved shade. Confirming to IS-12823:1990. 2 mm thick PVC edge band will confirm to

DIN 68861 for resistance to clearers. The edge band material should have Shore D hardness

of 79± 4. The Hot melt glue used for fixing the PVC edge band should have ISO 9001- 2015

quality certification confirming to ASTM D 4499 standards for viscosity and thermal stability.

17 The edges should be PVC Edge banded with matching finish or have an option of reverse 2 NOS ₹ 17,110.00 ₹ 34,220.00

water fall edges.Modesty Panel shall be made of 18mm thick PLT both sides pre-laminate

board confirming to IS-14587:1998.The height of modesty shall be 450 mm.The modesty panel

will be connected to the main table by 2 nos special Aluminum extruded brackets. The

modesty will be fixed 150 mm from the edge of the table.

Wire Management:Continuous PVC Cable Tray with provision to mount switches and sockets

as per client requirement. Vertical wire entry cover for wire uptake from floor to cable tray and

300mm Aluminium Flip Up for swicth access.

Legs and Supports:- The MS supports are made of 50 x50mm square ERW tubes- 16g with

levelers to cater for floor undulations- +/- 20 mm. ERW Tube confirming to IS 4923 : 1997 –

16g. Main leg members will be connected through a horizontal member size 1.6mm thk, 50x25

cold formed ERW tube confirming to IS 4923: 1997. The vertical and the horizontal tubes will

STORAGE FOR AUDIT ROOM

SIZE: 1200W X 600D X 2100HT

Specifications:

The storage will be made in 18 MM PLB (Pre laminated board) with the density of 680kg/m³

and 18 mm thick one side pre-laminate board confirming to IS 12406 : 2013. Surface: CPL (

continuous pressure laminate) in 0.5mm thickness in melamine finish. The PLB will be

confirming to E-1 Grade as per the JIS A 5905-2003 standards and approved shade confirming

to IS-12823:1990.The back of storage will be made in 9 MM PLB (Pre laminated board) with

19 the density of 680kg/m³ and 18 mm thick one side pre-laminate board confirming to IS 12406 : 2 NOS ₹ 17,916.30 ₹ 35,832.60

2013. Surface: CPL ( continuous pressure laminate) in 0.5mm thickness in melamine finish.

Storgage will be provided with edge banding 2 mm thick PVC edge band will confirm to DIN

68861 for resistance to clearers. The Hot melt glue used for fixing the PVC edge band should

have ISO 9001- 2015 quality certification and confirm to ASTM D 4499 standards for viscosity

and thermal stability. The edge band material should have Shore D hardness of 79± 4. storage

will have two adjustable shelves making 3 compartments.The shutters are fitted with auto

closing hinges.Central locking system , levellers & other necessary hardware are

priovided.Handles will be hand grooved.

Digitally signed by AMIT

S NO DESCRIPTION/ SPECIFICATIONS QTY UNIT PRICE AMOUNT

SIZE: 900W X 450D X 1200HT

Specifications:

The storage will be made in 18 MM PLB (Pre laminated board) with the density of 680kg/m³

and 18 mm thick one side pre-laminate board confirming to IS 12406 : 2013. Surface: CPL (

continuous pressure laminate) in 0.5mm thickness in melamine finish. The PLB will be

confirming to E-1 Grade as per the JIS A 5905-2003 standards and approved shade confirming

to IS-12823:1990.The back of storage will be made in 9 MM PLB (Pre laminated board) with

20 the density of 680kg/m³ and 18 mm thick one side pre-laminate board confirming to IS 12406 : 8 NOS ₹ 13,437.90 ₹ 107,503.20

2013. Surface: CPL ( continuous pressure laminate) in 0.5mm thickness in melamine finish.

Storgage will be provided with edge banding 2 mm thick PVC edge band will confirm to DIN

68861 for resistance to clearers. The Hot melt glue used for fixing the PVC edge band should

have ISO 9001- 2015 quality certification and confirm to ASTM D 4499 standards for viscosity

and thermal stability. The edge band material should have Shore D hardness of 79± 4. storage

will have two adjustable shelves making 3 compartments.The shutters are fitted with auto

closing hinges.Central locking system , levellers & other necessary hardware are

priovided.Handles will be hand grooved.

RECEPTION TABLE

TABLE SIZE: 1500W X 750D X 1050HT

Specifications:

21 Table Top made up of 25 mm thick PLB top & under sturcture is made up of 18MM thick PLB 1 NOS ₹ 89,219.80 ₹ 89,219.80

as per approvel color. . Gable end & Side is made up of 18mm thk. plb. All Exposed edges are

sealed with PVC edge-band of 2 mm thickness & Non-exposed edges are sealed with 0.45

mm thick Edge-band from REHAU.

Digitally signed by AMIT

S NO DESCRIPTION/ SPECIFICATIONS QTY UNIT PRICE AMOUNT

SOFA FOR RECEPTION

MODEL:- CONVERSE 1 SEATER

sofa-Width: 780 mm Depth:750 mm Height: 820mm cm Seat Foam: The Seat is made of PU

Foam with Density 32+/- 2 kg/cu .mtr having an additional top layer of PU Foam with Density

28+/- 2 kg/cu.mtr, Seat is upholstered wuth Leatherette.Back Foam: The Back is made of PU

Foam with Density 28 +/- 2 kg/cu .mtr having an additional top layer of PU Foam with Density

23+/- 2 kg/cu.mtr, Backis upholstered wuth Leatherite. understructure: unterstructure is made

up of 1.2+/- 0.1cm thick hote pressed plywood , 4mm Dia zigzag Spring is mounted in the

understructure for support and additional cushioning purpose. Leg Assembly: is welded

assembly made in SS 202 Grade tube.

Digitally signed by AMIT

Schedule of Quantities: Signages

S No Description Unit Qty Unit price

1 RECEPTION 3D ACRYLIC SIGNAGE

Providing, fabricating and fixing of 3D Acrylic Letters raised 1.5 inches of

required size and shape with arrangement of screws in the letters itself for

mounting on the walls or pasting using Tape. Fixing complete as per

directions of the engineer. The sizes would be calculated in Sqft as per Logo Each 1 25,624.00 25624.00

Design provided.

Tentative Size 42"x60"

2 NAME SIGNAGE CHANGEABLE (All Floors)

Providing and fixing of Acrylic signage made of 3mm Acrylic with textured

wood finish pasted /White milky acrylic 3mm laser cut pasted on top with

proper names/ Departments written using plottercut vinyl or laser cut acrylic

letters in approved colour.Inserting provision for changing names .Fixing Each 11 1,281.00 14091.00

provision using double sided tape as required.

Signage Size 12"x5"

3 TOILET ICONS

Providing and fixing of Acrylic signage made of 5mm Acrylic with textured

wood finish pasted /White milky acrylic 3mm laser cut pasted on top with

proper icons using plottercut vinyl or laser cut acrylic letter in approved colour. Each 3 1,025.00 3075.00

Fixing provision using double sided tape as required.

Signage Size :8"x8"

4 FIRE SAFETY SIGNAGE

Providing fabricating and fixing of signage 05 mm thick Acrylic / Sun board

sheet at base with photoluminescent film self adhesive & colored vinyl (

Red/Green) Plotter cut and pasted on top. Both side / Single Side facing

Complete including fixing on wall with screws and washers or hanging on

ceiling with GI chain/GI Bar complete as per technical specifications and

a directions of Engineer.

Photoluminescent, Fire Hose Reel - 10"x8" Each 2 384.00 768.00

b Photoluminescent, Fire Exit / Escape Sign - 18"x6" Each 2 384.00 768.00

c Photoluminescent, Floor Level - 18"x6" Each 2 384.00 768.00

d Photoluminescent, Fire Alarm Call Point - 10"x8" Each 2 384.00 768.00

e Photoluminescent, Fire do not use lift- 10"x8" Each 2 384.00 768.00

f Photoluminescent Signs, Fire Extinguishers - 10"x8" Each 5 384.00 1920.00

TOTAL 48550.00

Digitally signed by AMIT

SCHEDULE OF QUANTITIES: LANDSCAPE

S NO DESCRIPTION Qty Unit Rate DSR AMOUNT NON DSR AMOUNT

Supply and Planting Lolina plant having 2-3 ft height with Coco-

1 peat, mud and manure complete. 5 Each 1500.00 7500.00

Supply and Planting Seaforthia Palm having ht. 90cm to 1.20 m

2 with 6-8 suckers, well developed, fresh and healthy lush green 5 Each 1500.00 7500.00

leaves from bottom to top complete.

Supply and Planting Rhapis Palm having ht. 90cm to 1.20 m with

15 to 18 equal suckers, well developed, full of fresh and healthy

3 leaves from bottom to top complete. 5 Each 1500.00 7500.00

Supply of full soil fill conical shaped planters of specified volume

and dimensions in stone finish or equivalent. planters to be

indigenously made by rotational moulding, with homogeneous

recyclable, industrial grade polymer-resin mix, and textured

surface. planters should have an integrated water outlet hole &

plug, single layered peel-proof construction, light weight, rust

4 proof, uv stabilized, anti-frost feature without any joints, and

easy to clean. planter supplier must give 1 year warranty against

any fading or cracking for both indoor and outdoor use. green

plant and laying is extra. potting instructions as per company

5 Artificial Vertical Garden on wall 15 Sqm 2562.00 38430.00

6.1 Supply and installation of Natural Plants with sand, fertilizer etc. 15 LS 500.00 7,500.00

Digitally signed by AMIT