REPAIR OR REPLACEMENT OF POST LANTERN, FLOOD LIGHTS,

Amount

Taking down carefully aluminium/copper point wiring (light,fan,socket or power) of any type complete, including fittings such as switches,ceiling roses,pendants,regulators sockets etc.,removing from site and making good disturbed surfaces of walls,floors,ceiling etc.,all as directed

Material and labour for point wiring with 1.50 Sqmm PVC insulated un sheatned multi stranded copper conductor cable (FRLSH) 1100 volts grade two single core conforming to IS-694-1990 and one run of continious earth wire with 1.50 Sqmm PVC insulated unsheatned stranded copper conductor cable (FRLSH) draw in and including heavy duty 20 mm dia PVC conduit (ISI marked) in concealed with all necessary fittings and fixures with GI sunken boxes with earth dolly and 3 mm laminated cover sheet suitable for fixing switch, socket, regulator, fan point, exhaust fan point etc. including making good disturbed surface with CM (1:4) to match with the existing surface complete all as specified for the following :- Note:- (a) Red coloured cable shall be used for live connection, black coloured cable shall be used for neutral connection and green coloured cable shall be used for earthing. Separate cable for earthing and neutral to be used for each individual circuit from the distribution board. (b) Quoted rates shall be deemed for conduit, cover plate and box of suitable module, cutting chases of wall, making good disturbed wall. Make: Finolex(ISI Marked)/ Polycab(ISI Marked)/ Nicco (ISI Marked)/ Havells (ISI Marked)/ RR Cable(ISI Marked)/ KEI (ISI Marked)

One light/ fan point/ call bell controlled by one, one way switch

One light point controlled by two nos, two way switch

One 5 pin 6 Amps switch socket outlet point controlled by one switch on independent board.

One 5 pin 6 Amps switch socket outlet point controlled by one switch on same board.

All as per Item No 2.00 but One 3 pin socket outlet. 15 amps, independent, with cables 4 sq. mm size complete all as specified.

Material and labour for point wiring (surface type) with 1.5 Sqmm PVC insulated (FRLSH) unsheathed copper cable multistranded conductor 1100 volts grade controlled by one way switch including 1.5 sqmm PVC (FRLSH) insulated unsheathed copper cable multistrand conductor 1100 volts grade for continuity earth wire connected to common earth dolly drawn through and including PVC casing caping with all accessories and sunk cast pressed steel terminal box made out of MS sheet of 1.6 mm thick for mounting of fittings like switch, socket and fan regulator with3mm thick hylum laminated/bakalite sheet cover complete all as specified for the followings:- Note:- (a) Red coloured cable shall be used for live connection, black coloured cable shall be used for neutral connection and green coloured cable shall be used for earthing. Separate cable for earthing and neutral to be used for each individual circuit from the distribution board. (b) Quoted rates shall be deemed for 'N' capping and box of suitable module. Make: Finolex(ISI Marked)/ Polycab(ISI Marked)/ Nicco (ISI Marked)/ Havells (ISI Marked)/ RR Cable(ISI Marked)/ KEI (ISI Marked)

One light/ fan point/ call bell controlled by one, one way switch

One 5 pin 6 Amps switch socket outlet point controlled by one switch on same board.

One 5 pin 6 Amps switch socket outlet point controlled by one switch on independent board.

All as per Item No 4.00 but One 3 pin socket outlet. 15 amps, independent, with cables 4 sq. mm size complete all as specified.

All as per Item No 2.00 but only for copper conductor and making good disturbed surface.

One light/ fan point/ call bell controlled by one, one way switch

One light point controlled by two nos, two way switch

One 5 pin 6 Amps switch socket outlet point controlled by one switch on independent board.

One 5 pin 6 Amps switch socket outlet point controlled by one switch on same board.

All as per Item No 6.00 but One 3 pin socket outlet. 15 amps, independent, with cables 4 sq. mm size complete all as specified.

Supply and fix as in repairs Switch piano, flush type single pole one way 6 Amps 240V. Make: L&T/ Legrand/ Havells/ Anchor/ Schneider/ Hager

Supply and fix as in repairs Switch piano, flush type single pole two way 6 Amps 240V. Make: L&T/ Legrand/ Havells/ Anchor/ Schneider/ Hager

Supply and fix as in repairs bell push flush type 6 Amps. Make: L&T/ Legrand/ Havells/ Anchor/ Schneider/ Hager

Supply and fix as in repairs switch socket outlet , 3 pin 6 Amps 240 V flush type . Make: L&T/ Legrand/ Havells/ Anchor/ Schneider/ Hager

Supply and fix as in repairs switch socket combination, 2 in 1, 5 pin 6 Amps 240 V ,flush type. Make: L&T/ Legrand/ Havells/ Anchor/ Schneider/ Hager

Supply and fix as in repairs switch socket combination, 2 in 1, 5 pin 6 Amps and 16 Amps 240 V ,flush type. Make: L&T/ Legrand/ Havells/ Anchor/ Schneider/ Hager

Supply and fix as in repairs call bell ding dong type SP 230V. Make: L&T/ Legrand/ Havells/ Anchor/ Schneider/ Hager

Supply and fix as in repairs ceiling rose surface baklite with three terminals 240 V. Make: L&T/ Legrand/ Havells/ Anchor/ Schneider/ Hager

Supply and fix as in repairs lamp Angular holder insulated body with back plate suitable for batten fittings all as specified. Make: L&T/ Legrand/ Havells/ Anchor/ Schneider/ Hager

Supply and fix as in replacement LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specifed and directed. Make:- Crompton / Bajaj/ Philips/ Havells/ Osram/ Wipro/ GE Note:- (a) LM-79 and LM-80 certificate from NABL accredited Lab shall be submitted for LED light fittings. (b) Warranty certificate shall be submitted for LED light fitting as per standered format for minium 50000 Hrs. (c) LED light fitting and drivers shall be of same make.

Supply and fix as in replacement LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specifed and directed. Make:- Crompton / Bajaj/ Philips/ Havells/ Osram/ Wipro/ GE Note:- (a) LM-79 and LM-80 certificate from NABL accredited Lab shall be submitted for LED light fittings. (b) Warranty certificate shall be submitted for LED light fitting as per standered format for minium 50000 Hrs. (c) LED light fitting and drivers shall be of same make.

Supply and fix as in replacement 12-15W LED surface mounted downlighter with white powder coated aluminum housing with integrated electronic driver and all accessores complete all as directed. Make:- Crompton / Bajaj/ Philips/ Havells/ Osram/ Wipro/ GE Note:- (a) LM-79 and LM-80 certificate from NABL accredited Lab shall be submitted for LED light fittings. (b) Warranty certificate shall be submitted for LED light fitting as per standered format for minium 50000 Hrs. (c) LED light fitting and drivers shall be of same make.

Supply and fix as in replacement 6W LED surface mounted downlighter with white powder coated aluminum housing with integrated electronic driver and all accessores complete all as directed. Make:- Crompton / Bajaj/ Philips/ Havells/ Osram/ Wipro/ GE Note:- (a) LM-79 and LM-80 certificate from NABL accredited Lab shall be submitted for LED light fittings. (b) Warranty certificate shall be submitted for LED light fitting as per standered format for minium 50000 Hrs. (c) LED light fitting and drivers shall be of same make.

Supply and fix as in replacement decorative, wall mounting, chrome finish fixture with opal glass diffuser suitable for 7.5 W A60 LED filament lamp E27 base complete all as per manufacturer instruction. Make:- Crompton / Bajaj/ Philips/ Havells/ Osram/ Wipro/ GE Note:- (a) LM-79 and LM-80 certificate from NABL accredited Lab shall be submitted for LED light fittings. (b) Warranty certificate shall be submitted for LED light fitting as per standered format for minium 50000 Hrs. (c) LED light fitting and drivers shall be of same make.

Supply and fixing as in replacement LED luminaire 600mm x 600mm square type 34 to 36 watt, 220V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three flexible copper conductor cases of suitable size complete all as directed. Make:- Crompton / Bajaj/ Philips/ Havells/ Osram/ Wipro/ GE Note:- (a) LM-79 and LM-80 certificate from NABL accredited Lab shall be submitted for LED light fittings. (b) Warranty certificate shall be submitted for LED light fitting as per standered format for minimum 50000 Hrs. (c) LED light fitting and drivers shall be of same make.

Supply and fix as in replacement LED Bldg security luminaire 30 W Aluminium PDC housing, toughened glass cover, IP 65 protection, pre-wired and including GI bracket, clamp, nut, bolts, etc of suitable size, connecting up with twin core twisted flexible copper conductor cable with suitable size all as directed. Make: Crompton / Bajaj/ Philips/ Havells/ Osram/ Wipro/ GE Note:- (a) LM-79 and LM-80 certificate from NABL accredited Lab shall be submitted for LED light fittings to the Engineer-In-Charge. (b) Warranty certificate shall be submitted for LED light fitting as per standered format for minimum 50000 Hrs to the Engineer-In-Charge. (c) LED light fitting and drivers shall be of same make.

Supply and fix as in replacement sheet metal enclosure MCB DB SPN with 200 Amp rated bus bar 8 way 240 V (double door type) with magnetic locking system including necessary provision for inserting the DBs in wall by cutting the brick/ stone masonry etc. and making good of disturbed surface to match with existing colour of wall complete all as specified. Make: ABB/ Siemens/ Schneider/ Legrand/ Hagger/ L&T/ GE Note: (a) Quoted rates shall be deemed for brick wall / concrete wall cutting and making good as per existing surfaces.

Supply and fix as in replacement sheet metal enclosure MCCB DB TPN with 160 Amp rated bus bar 4 way 415 V (double door type) with magnetic locking system including necessary provision for inserting the DBs in wall by cutting the brick/ stone masonry etc. and making good of disturbed surface to match with existing colour of wall complete all as specified. Make: ABB/ Siemens/ Schneider/ Legrand/ Hagger/ L&T/ GE Note: (a) Quoted rates shall be deemed for brick wall / concrete wall cutting and making good as per existing surfaces.

Supply and fix as in repair MCB SP 240 volts, 50 Hz capacity 6-32 Amps 'B' curve all as specified. Make: ABB/ Siemens/ Schneider/ Legrand/ Hagger/ L&T/ GE

Supply and fix as in repair MCB SPN 240 volts, 50 Hz capacity 40 Amps 'B' curve all as specified. Make: ABB/ Siemens/ Schneider/ Legrand/ Hagger/ L&T/ GE

Supply and fix as in replacement MCCB, adjustable type thermal magnetic release type,4 poles, 415 Volts, Ics = 100% Icu, Lcu = 16 KA breaking capacity, rating 100 Amps including all fixing accessories with both ends spreader links Make: ABB/ Siemens/ Schneider/ Legrand/ Hagger/ L&T/ GE Note: (a) Quoted rates shall be deemed for brick wall / concrete wall cutting and making good as per existing surfaces.

Supply and fixing sub-main wiring with PVC insulated & unsheathed two run of 4.00 Sqmm single core multistrand copper conductor cable (FRLSH), 1100 Volt grade alongwith single run of 4.00 Sqmm PVC insulated & unsheathed copper conductor cable (FRLSH) 1100 Volt grade, connected to common earth dolly as earth continuity conductor, drawn through minimum 25 mm PVC conduit including taking down existing wiring complete all as specified and directed. Note:- (a) PVC conduit in concealed including accessories shall be measured and paid including the item. (b) 2 Run of line conductor and 1 Run of earth continuity conductor shall be measured as one unit length. (c) Cable requireds for connection to MCBs/DBs shall be deemed to be included in the unit rate. (d) Rate shall be included for cutting, pinning in, making good to facings where required for pointing in cement mortar 1:3 and cutting chases for concealed conduit wiring and making good, and cutting not exceeding 10 cm girth. Make:Finolex(ISI Marked)/ Polycab(ISI Marked)/ Nicco (ISI Marked)/ Havells (ISI Marked)/ RR Cable(ISI Marked)/ KEI (ISI Marked)

Supply and fixing sub-main wiring with PVC insulated & unsheathed two run of 6.00 Sqmm single core multistrand copper conductor cable (FRLSH), 1100 Volt grade alongwith single run of 6.00 Sqmm PVC insulated & unsheathed copper conductor cable (FRLSH) 1100 Volt grade, connected to common earth dolly as earth continuity conductor, drawn through minimum 25 mm PVC conduit including taking down existing wiring complete all as specified and directed. Note:- (a) PVC conduit in concealed including accessories shall be measured and paid including the item. (b) 2 Run of line conductor and 1 Run of earth continuity conductor shall be measured as one unit length. (c) Cable requireds for connection to MCBs/DBs shall be deemed to be included in the unit rate. (d) Rate shall be included for cutting, pinning in, making good to facings where required for pointing in cement mortar 1:3 and cutting chases for concealed conduit wiring and making good, and cutting not exceeding 10 cm girth. Make:Finolex(ISI Marked)/ Polycab(ISI Marked)/ Nicco (ISI Marked)/ Havells (ISI Marked)/ RR Cable(ISI Marked)/ KEI (ISI Marked)

Supply and fixing sub-main wiring with PVC insulated & unsheathed two run of 10.00 Sqmm single core multistrand copper conductor cable (FRLSH), 1100 Volt grade alongwith single run of 10.00 Sqmm PVC insulated & unsheathed copper conductor cable (FRLSH) 1100 Volt grade, connected to common earth dolly as earth continuity conductor, drawn through minimum 25 mm PVC conduit including taking down existing wiring complete all as specified and directed. Note:- (a) PVC conduit in concealed including accessories shall be measured and paid including the item. (b) 2 Run of line conductor and 1 Run of earth continuity conductor shall be measured as one unit length. (c) Cable requireds for connection to MCBs/DBs shall be deemed to be included in the unit rate. (d) Rate shall be included for cutting, pinning in, making good to facings where required for pointing in cement mortar 1:3 and cutting chases for concealed conduit wiring and making good, and cutting not exceeding 10 cm girth. Make:Finolex(ISI Marked)/ Polycab(ISI Marked)/ Nicco (ISI Marked)/ Havells (ISI Marked)/ RR Cable(ISI Marked)/ KEI (ISI Marked)

Material and labour for earthing complete with galvanised steel earth plate electrode 60 cm × 60 cm.× 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion including taking out old earthing complete all as specified and directed.

Material and labour for earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 4 mm dia galvanised iron or steel wire including taking out existing conductor complete all as specified and directed.

Taking down Ceiling Fan of any Sweep and Make by disconnecting Electric Connection, dismantling Blades, Down Rod and removing Ceiling Fan to MES STORE YARD OF AGE E/M (AF) SHILLONG for Check-ing, complete including Hanging of Ceiling Fan in same position after repair and assemble of parts, connecting up with and including of Flexible Copper 3 Core Wire of 1.5 Sqmm, from Ceiling Rose/Connector to Fan, complete all as specified and as directed.

Taking down Exhaust Fan/wall mounted fan of any Sweep and Make by disconnecting Electric Connection, dismantling Blades, Down Rod and removing Exhaust Fan to MES STORE YARD OF AGE E/M (AF) SHILLONG for Check-ing, complete complete including fixing of exhaust Fan in same position/hole after repair and assemble of parts, connecting up with and including of Flexible Copper 3 Core Wire of 1.5 Sqmm, from Ceiling Rose/Connector to exhaust Fan, complete all as specified and as directed. all as specified and as directed.

Material and labour for Opening Stator of Ceiling Fan of any Sweep Cleaning of Parts, replacement of Unserviceable Parts as ordered, Greasing of Moveable Parts, Taking out burnt Coil, Cleaning the Segments complete and Re-winding the Same with Supper Enameled Copper Wire of same Gauge and same Weight with Insulation Paper, Varnishing and Heating, Re-assemble the same after repaired and Testing, complete all as specified and as directed .

Material and labour for Opening Stator of exhaust Fan of 380 mm Sweep Cleaning of Parts, replacement of Unserviceable Parts as ordered, Greasing of Moveable Parts, Taking out burnt Coil, Cleaning the Segments complete and Re-winding the Same with Supper Enameled Copper Wire of same Gauge and same Weight with Insulation Paper, Varnishing and Heating, Re-assemble the same after repaired and Testing, complete all as specified and as directed .

Material and labour for Opening Stator of exhaust Fan of 450 mm to 600 mm Sweep Cleaning of Parts, replacement of Unserviceable Parts as ordered, Greasing of Moveable Parts, Taking out burnt Coil, Cleaning the Segments complete and Re-winding the Same with Supper Enameled Copper Wire of same Gauge and same Weight with Insulation Paper, Varnishing and Heating, Re-assemble the same after repaired and Testing, complete all as specified and as directed .

Supply only ball bearing suitable for exhaust fan of upto 380 mm sweep complete all as specfied and as directed. Make : TATA/SKF/NBC.

Supply only ball bearing suitable for exhaust fan of 450 mm to 600 mm sweep complete all as specfied and as directed. Make : TATA/SKF/NBC.

Supply only gun metal bush suitable for any type and any sweep of wall fan/exhaust fan complete all as specfied and as directed.

Supply only flexible wire twisted twin core of size 0.75 Sqmm, copper conductor complete all as specfied and as directed. Make : Finolex(ISI Marked)/ Polycab(ISI Marked)/ Nicco (ISI Marked)/ Havells (ISI Marked)/ RR Cable(ISI Marked)/ KEI (ISI Marked)

Material and labour for single coat painting to ceiling fan upto 1400 mm sweep after dismantling blades, with 1st grade quality synthetic enamel paint by spraying, filling cavities with filler including necessary preparation of surface duly demarking MES fan serial Nos, refixing the blades and re-writing MES Fan serial number complete all as specfied and as directed. Make of Synthetic enamel paint: Shalimar Paints (Superlac)/ Asian (Apcolite)/ Berger (Luxol)/ Jenson & Nicholson Paints Ltd (Brolac)/ Nerolac (Impression)

Material and labour for single coat painting to exhaust fan/ wall fan upto 380mm sweep with 1st grade quality synthetic enamel paint by spraying, filling cavities with filler including necessary preparation of surface duly demarking the MES Fan Nos and re-writing MES fan serial number complete all as specfied and as directed. Make of Synthetic enamel paint: Shalimar Paints (Superlac)/ Asian (Apcolite)/ Berger (Luxol)/ Jenson & Nicholson Paints Ltd (Brolac)/ Nerolac (Impression)

Material and labour for single coat painting to exhaust fan/ wall fan from 400 to 600mm sweep with 1st grade quality synthetic enamel paint by spraying, filling cavities with filler including necessary preparation of surface duly demarking the MES fan Nos and re-writing MES Fan serial number complete all as specfied and as directed. Make of Synthetic enamel paint: Shalimar Paints (Superlac)/ Asian (Apcolite)/ Berger (Luxol)/ Jenson & Nicholson Paints Ltd (Brolac)/ Nerolac (Impression)

Material and labour for cutting holes in circular shape in brick walls exceeding half brick but not exceeding one brick thick in cement mortar for fixing exhaust fan and making good disturbed surfaces in cement mortar (1:3) finished even and smooth and to match with existing as required complete all as specfied and as directed. Make of Synthetic enamel paint: Shalimar Paints (Superlac)/ Asian (Apcolite)/ Berger (Luxol)/ Jenson & Nicholson Paints Ltd (Brolac)/ Nerolac (Impression)

Taking down carefully existing ceiling fan of any size/sweep/make from it's existing position, dismantling the fan including preventive maintenance by servicing, greasing, oiling, cleaning external surfaces porperly and replacement of defective spare parts and re-assembling and refixing/hanging in the same position connecting with flexiable cable including testing complete all as specfied and as directed. Note : (a) Cost of spare parts and flexible connection wire as required will be measured and paid separately under respective items of this Schedule as "Supply only". (b) Rate of split pin, nut bolt, rubber grip and screw/washer, for fixing the blade shall be included in the quated rate.

Supply and fix as in replacement PVC holder for holding capacitor (condenser housing) of any size in ceiling fan complete all as specified and as directed. Make: L&T/ Legrand/ Havells/ Anchor/ Schneider/ Hager

Supply and fix Test point terminal block made of gun metal or phosphorous bronze size 75mm x 75mm x 25mm, drilled and screwed including 3 Nos, 8mm dia and 25mm long hex head screw complete, as in repair all as directed by Engineer in Charge.

Supply and fix in replacement LED Post top lantern of 50 Watts, 240V, 50Hz IP 65 made of black ABS plastic spigot, spun aluminium funnel shape with clear acrylic and accessories such as integrated drivers pre-wired etc suitable with gate light pipe. Make: Crompton / Bajaj/ Philips/ Havells/ Osram/ Wipro/ GE Note:- (a) LM-79 and LM-80 certificate from NABL accredited Lab shall be submitted for LED light fittings to the Engineer-In-Charge. (b) Warranty certificate shall be submitted for LED light fitting as per standered format for minimum 50000 Hrs to the Engineer-In-Charge. (c) LED light fitting and drivers shall be of same make.

Supply and fix in replacement LED Post top lantern of 25 Watts, 240V, 50Hz IP 65 made of black ABS plastic spigot, spun aluminium funnel shape with clear acrylic and accessories such as integrated drivers pre-wired etc suitable with gate light pipe. Make: Crompton / Bajaj/ Philips/ Havells/ Osram/ Wipro/ GE Note:- (a) LM-79 and LM-80 certificate from NABL accredited Lab shall be submitted for LED light fittings to the Engineer-In-Charge. (b) Warranty certificate shall be submitted for LED light fitting as per standered format for minimum 50000 Hrs to the Engineer-In-Charge. (c) LED light fitting and drivers shall be of same make.

Supply and fix in replacement LED Post top lantern of 30 Watts, 240V, 50Hz IP 65 made of black ABS plastic spigot, spun aluminium funnel shape with clear acrylic and accessories such as integrated drivers pre-wired etc suitable with gate light pipe. Make: Crompton / Bajaj/ Philips/ Havells/ Osram/ Wipro/ GE Note:- (a) LM-79 and LM-80 certificate from NABL accredited Lab shall be submitted for LED light fittings to the Engineer-In-Charge. (b) Warranty certificate shall be submitted for LED light fitting as per standered format for minimum 50000 Hrs to the Engineer-In-Charge. (c) LED light fitting and drivers shall be of same make.

Supply and fix in replacement LED wall light of 15 Watts, decorative IP 66 LED UP-down Luminaire with wall surface mounting. Make: Crompton / Bajaj/ Philips/ Havells/ Osram/ Wipro/ GE Note:- (a) LM-79 and LM-80 certificate from NABL accredited Lab shall be submitted for LED light fittings to the Engineer-In-Charge. (b) Warranty certificate shall be submitted for LED light fitting as per standered format for minimum 50000 Hrs to the Engineer-In-Charge. (c) LED light fitting and drivers shall be of same make.

Supply and fix in replacement LED wall light of 25 Watts, decorative, spherical shape polycarbonate diffuser & IP 65 protection with wall surface mounting. Make: Crompton / Bajaj/ Philips/ Havells/ Osram/ Wipro/ GE Note:- (a) LM-79 and LM-80 certificate from NABL accredited Lab shall be submitted for LED light fittings to the Engineer-In-Charge. (b) Warranty certificate shall be submitted for LED light fitting as per standered format for minimum 50000 Hrs to the Engineer-In-Charge. (c) LED light fitting and drivers shall be of same make.

Supply and fix in replacement LED Post top lantern of 20 Watts, 240V, 50Hz IP 65 made of black ABS plastic spigot, spun aluminium funnel shape with clear acrylic and accessories such as integrated drivers pre-wired etc suitable for garden/ park etc. Make: Crompton / Bajaj/ Philips/ Havells/ Osram/ Wipro/ GE Note:- (a) LM-79 and LM-80 certificate from NABL accredited Lab shall be submitted for LED light fittings to the Engineer-In-Charge. (b) Warranty certificate shall be submitted for LED light fitting as per standered format for minimum 50000 Hrs to the Engineer-In-Charge. (c) LED light fitting and drivers shall be of same make.

Supply and fix in replacement LED bollard of 9-10 Watts, 240V, 50Hz IP 65 tripod type. Make: Crompton / Bajaj/ Philips/ Havells/ Osram/ Wipro/ GE Note:- (a) LM-79 and LM-80 certificate from NABL accredited Lab shall be submitted for LED light fittings to the Engineer-In-Charge. (b) Warranty certificate shall be submitted for LED light fitting as per standered format for minimum 50000 Hrs to the Engineer-In-Charge. (c) LED light fitting and drivers shall be of same make.

Supply and fix in replacement LED floodlight of 60 Watt made up of pressure die cast aluminium housing with toughened glass and high power LEDs with IP66 protection. Make: Crompton / Bajaj/ Philips/ Havells/ Osram/ Wipro/ GE Note:- (a) LM-79 and LM-80 certificate from NABL accredited Lab shall be submitted for LED light fittings to the Engineer-In-Charge. (b) Warranty certificate shall be submitted for LED light fitting as per standered format for minimum 50000 Hrs to the Engineer-In-Charge. (c) LED light fitting and drivers shall be of same make.

Supply and fix in replacement LED floodlight of 80 Watt made up of pressure die cast aluminium housing with toughened glass and high power LEDs with IP66 protection. Make: Crompton / Bajaj/ Philips/ Havells/ Osram/ Wipro/ GE Note:- (a) LM-79 and LM-80 certificate from NABL accredited Lab shall be submitted for LED light fittings to the Engineer-In-Charge. (b) Warranty certificate shall be submitted for LED light fitting as per standered format for minimum 50000 Hrs to the Engineer-In-Charge. (c) LED light fitting and drivers shall be of same make.

Supply and fix in replacement LED floodlight of 120 Watt made up of pressure die cast aluminium housing with toughened glass and high power LEDs with IP66 protection. Make: Crompton / Bajaj/ Philips/ Havells/ Osram/ Wipro/ GE Note:- (a) LM-79 and LM-80 certificate from NABL accredited Lab shall be submitted for LED light fittings to the Engineer-In-Charge. (b) Warranty certificate shall be submitted for LED light fitting as per standered format for minimum 50000 Hrs to the Engineer-In-Charge. (c) LED light fitting and drivers shall be of same make.

Material and labour for excavating in trenches not exc 1.50 mtr wide and not exc 1.50 mtr in depth for taking out/laying of under ground cable, pole or stay and getting out in soft/loose soil, complete all as specified and as directed.

Returning filling in soft/loose soil, including, spreading, levelling, watering and well ramming in layers not exc. 25 cm complete all as specified and directed. NOTE : The top of filled trench shall be made proud by using the excavated soil to cater for subsequent settlement of soil.

Removing excavated materials (soils) not exc 50.00mtr and depositing where directed at a level not exc 1.50 mtr above the starting point in soil, complete all as specified and as directed.

Supply and laying, connecting, testing, commissioning LT UG cable XLPE Insulated,armoured, electric power cables (heavy duty) 1100 Volts grade conforming to IS 7098 with aluminium conductor multi-strand of cross-sectional area 10 Sqmm 2.0 Core laid in trenches / ducts/ inside protection pipe including cable glands, lugs and suitable size of MS saddle clips etc. also including taking out existing UG cables all as directed by Engr-In-Charge. Make: Polycab(ISI Marked)/ Finolex(ISI Marked)/ Havells (ISI Marked)/ Gloster (ISI Marked)/ KEI (ISI Marked) Note:-(a) Excavation, sand cushioning, bricks shall be measured and paid separately

Supply and laying, connecting, testing, commissioning LT UG cable XLPE Insulated,armoured, electric power cables (heavy duty) 1100 Volts grade conforming to IS 7098 with aluminium conductor multi-strand of cross-sectional area 16 Sqmm 4.0 Core laid in trenches / ducts/ inside protection pipeincluding cable glands, lugs and suitable size of MS saddle clips etc. also including taking out existing UG cables all as directed by Engr-In-Charge. Make: Polycab(ISI Marked)/ Finolex(ISI Marked)/ Havells (ISI Marked)/ Gloster (ISI Marked)/ KEI (ISI Marked) Note:-(a) Excavation, sand cushioning, bricks shall be measured and paid separately

Supply and filling for dry sand in cable protection trenches before and after the cables are laid, for sand cushioning to cables complete all as specified and directed. NOTE : thickness after punning of sand shall be (minimum as specified in SSR) measured and paid in this item.

Material and labour for brick protection for UG XLPE cable with burnt clay old size sub class 'B' bricks laid dry and flat abutting each other with gaps between adjacent brick not more than 10mm and width equal to length of brick in trenches across the cable complete all as directed by Engineer-In-Charge. Make: Best quality locally available which is duly approved by GE.

Material and labour for tubes "light grade" galvanised with all fittings laid in trenches of 40mm bore dia. Make : Tata / Jindal Steel / Prakash/ Surya Roshni ltd

Material and labour for PVC insulated FRLSH industrial cable with multi stranded copper conductor 2.5 sqmm 3 core, 1100 volts including taking out old cable as directed by Engineer-In-Charge. Make : Polycab(ISI Marked)/ Finolex(ISI Marked)/ Havells (ISI Marked)/ Nicco (ISI Marked)/ KEI (ISI Marked)

Supply and fix as in repairs cable junction box of size 240 mm x 130 mm x 110 mm with terminals / connectors, mounting bracket & polyamide cable gland with lock nut & bolts including internal connections with proper size Copper/ Aluminum lugs/ thimbles including fixing on pole with clamps and also drilling of two holes on pole for inserting PVC insulated copper cable complete all as directed. Make: Hensel/ C&S Electrical/ Sintex

Supply and fix as in repair analog time switches 1 to 3 module as directed by Engineer-In-Charge Make : Legrand/ Crompton/ L&T/ Schneider/ Havells/ GE/ Bajaj

M/S DEEDAR ENTERPRISE

S K ENTERPRISE

madan enterprise

M/S BISWA CONSTRUCTION

M/s Gupta Construction

MAHINDER ELECTRICALS

kapoor and co

M/S RAGHU NATH SAH