Providing Electrical Installation to the work of Semi Covered shed campus for Paddy Storage along with basic amenities of 4500 MT Capacity (1 No of 2500MT and 1 No of 2000MT) at Thevur village in Kilvelur Taluk in Nagapattinam District

Wiring Wiring with 2x1.5 sq.mm. PVC insulated unsheathed FRLS SC copper conductor of 1100V grade insuitable PVC rigid pipe on wall and ceiling with PVC accessories with TW switch box with 5A FT switch inflush with wall covered with hylum sheet of 3mm thick with painting of suitable colour for open PVC light / fan point (for electronic regulator) (5points per coil) etc., complete complying with standard specification and as directed by the departmental officer.

Supply and Run of 2 of 2.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid Pipe on wall and ceiling with continuous earth wire connection of 2.5 sq.mm copper wire with painting of suitable colour etc., complete complying with standard specification and as directed by the departmental officer.

Supply and laying of 2x16 Sq.mm sized PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 Mtr Putting 0.15mt layer of sand and covering the three sides of the cable with bricks and refilling the earth to make good etc., complete complying with standard specification and as directed by the departmental officer.

Supply and clamping of 2x16 sq.mm PVC LTUG armoured ALU cable on post or on wall with MS clamps etc., complete complying with standard specification and as directed by the departmental officer.

Supply and fixing of brass cable gland for 2x16 sqmm PVC armoured LTUG cable with earth connection etc., complete complying with standard specification and as directed by the departmental officer.

Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure Distribution board 1No 32 Amps DB MCB as incoming and 6 Nos 6 Amps to 32 Amps SPMCB outgoing in flush with wall and making good of the concealed portion with earth connection only. The MCB DB and MCB's should be with ISI mark (Like Standard make) etc., complete complying with standard specification and as directed by the departmental officer.

Supply and fixing of 5A 3 pin and 2 pin combined flush type wall socket with 5A flush type switch on suitable TW box with hylem sheet etc., complete complying with standard specification and as directed by the departmental officer.

Supply and fixing of 5A/15A 3 pin combined flush type wall socket with 15A flush type switch on suitable TW box with hylem sheet etc., complete complying with standard specification and as directed by the departmental officer.

Supply and fixingof 3Nos.5A(3pinand2pin) combined flus htype wall socket with control switches concealed in suitable TW box covered with hylem sheet in flush with wall with earth connection (for computer plug socket) etc., complete complying with standard specification and as directed by the departmental officer .

Supply and fixingof 25A Flush type Wall Socket 25A DPMCB completeset for AC Plug in flush with wall with earth connection (For AC Plug) etc., complete complying with standard specification and as directed by the departmental officer.

Supply and run of 3core of 2.5 sqmm FLEXIBLE COPPER CABLE of 1100V Grade with suitable connection from 20Amps DP Box to Godown inside Switch box etc complete (ISI make) etc., complete complying with standard specification and as directed by the departmental officer.

Supply and fixing of single box type 4'36W fluorescent fitting complete with electronic ballast with TW round blocks on wall or ceiling with flu tube with PVC unsheathed FRLS Copper leads from terminals to the fitting etc., complete complying with standard specification and as directed by the departmental officer.

Supply and fixing of 60W LED street light fitting with LED (Lower end) with 32mm dia. GI pipe (class B) with 1 no.32 mm dia GI bend complete on the existing post/ on wall with PVC unsheathed FRLS copper leads with MS clamps and with painting etc., complete complying with standard specification and as directed by the departmental officer .

Supply and fixing of 1200mm sweep (48") AC ceiling fan complete with stepped electronic 300W regulator with 1 metre down rod on the existing clamp etc., complete complying with standard specification and as directed by the departmental officer.

Supply and fixing of 300mm (12") sweep (light duty) AC exhaust fan complete with necessary wall opening and making good of the wall etc., complete complying with standard specification and as directed by the departmental officer.

Supply of Power supply-Extension box,consist of 3 Nos. 5Amps (3 Pin and 2 Pin) socket with control switches,one Indicator in suitable TW Box covered with Hylem sheet, with 15Meter of 3core- 1.5Sq.mm copper wire of flat flexible cable wire and 5A-3pin top.The extension box with all inner-connections, flat cable wire connections with 3pin top also.The cost includes all materials cost,incidental charges,transportation charges and the materials of ISI make and as directed at site.(power supply provision for Weigh-Machine & bag-closing machine inside godown usage) etc., complete complying with standard specification and as directed by the departmental officer.

Supply and fixng of TNEB meter board suitable for 3 phase 63A service connection made up of suitable angle iron frame work of size 2feet x 1-1/2feet using angle iron of size1-1/2"x1-1/2"x1/4"rigidly fixed on wall covered with hylem sheet of size 2 feet x1/2 feet of 6mm thick ness with necessary bolts and nut s supports and supply and fixing of 3Nos. 63A fuse units(500V),1No.neutral link, copper earth flat of size1"x1/4"with interconnection of EB meter to fuse units by 16Sq.mm PVC insulated copper wire with 1No 63Amp 30MAFour Pole RCD/RCCB (Lower End)with suitable necessary connection with earth connection etc., complete complying with standard specification and as directed by the departmental officer.

Supply and run of 6 of 4sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade insuitable heavy gauge MS conduitpipe on wall and ceiling with continuous earth wire connection of 4sq.mm copper wire with painting of suitable colour etc., complete complying with standard specification and as directed by the departmental officer.

Supply and fixing of Panel with Fabrication, power coating ,and 25 x 3mm copper bus bar for phase, neutral and 25 x 3 mm copper flat for earthing , complete inter connection with 25 x 3mm copper flat , and VAF Meter wiring. (Main Panel board line with Control panel board) Material details. 1. 63A ON LOAD CHANGE OVER SWITCH = 1Set. 2.32A SDF SWITCH+ FUSE LINK = 3 Nos 3.16 A SDF SWITCH+ FUSE LINK = 3 Nos 4.VAF METER =1 No 5. INTICATION LAMB = 3 Nos

Earthing as per the ISI specification with an earth electrode of 2.10 metre Class 'B' GI pipe of dia not less than 40mm with copper earth plate of size 125mm x 50mm x 6mm with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry etc., complete complying with standard specification and as directed by the departmental officer.

Supply and laying in suitable size HDPE pipe in a trench dia for road crossing protect of UG cable including all incisdental charges etc., complete complying with standard specification and as directed by the departmental officer.

Supply and fixing of WT bulk head fitting with guard suitable with 7W / 9W LED bulb etc., complete complying with standard specification and as directed by the departmental officer

Supply and fixing of 60W LED ALL IN SOLAR STREET LIGHT, Lumens 100lm/watt, In build Charge Controller, PIR Motion Sensor,12.8V 25 - 24AH Lifepo4 Battery,60wp Module MonoPerc Pannel ,Led chip, LUMENS 4000, WORKING TIME : 1NIGHT, charging time:6 hours,IP -65,WARRANTY 3 years.1 METRE( 50X50X6) MM Angle 3Nos, and sutable size of MS pipe light fitting With supporting rod Clamp and installation ISI make etc., complete complying with standard specification and as directed by the departmental officer

Supply and installation of 5 KVA Single Phase Kirloskar Green Power Diesel generator with engine ENGINE model EA10G1 Air-cooled, 1-cylinder genset. Frequency Hz50 Power Factor lagging 0.8 VoltageV230 (1Ø) Governing class (As per IS 13364) G2DG Set Noise level at 1 meterd BA < 75 (Genset with canopy) Fuel tank capacity (Standard DG set) Ltrs. ALTERNATOR Insulation Class Class H Alternator Efficiency (at 100% load) 0.8 pf**% 80.43 Percent Voltage Dip at Full Load 0.8 pf lagsec < 20 %Max Time to build up rated voltage at Rated RPM< 2 sec, provided engine reach the rated speed etc., complete complying with standard specification and as directed by the departmental officer.

Supplying and fixing of suitable angle iron frame for placing the 5KVA generator in godown no - 12 making cutting the concrete of ramp and welding the angle iron frame in the existing steel rods and grouting the angle iron frame in ground with suitable cement concrete with jelly, sand and cement and providing suitable chequered plate above the angle iron frame making good with welding and suitable bolt and nuts for erecting the generator etc., complete complying with standard specification and as directed by the departmental officer.

Earthing arrangements with GI Earth Plate including charcoal and salt with necessary excavation in all soils and to full depth as may be required and masonry work, re-filling the sides of foundation with excavated earth etc., complete complying with standard specification and as directed by the departmental officer.

Supply and run of 25mm x 3mm tinned copper flat with necessary clamps/supports on wall /floor/ground for earth connection etc., complete complying with standard specification and as directed by the departmental officer

Please Enable Macros to View BoQ information